O ganho crescen te de desempenho nos computadores modernos tem impulsionado os trabalhos científicos nas áreas de simulação computacional. Muitos autores utilizam em suas pesquisas ferramentas comerciais que limitam seus trabalhos ao esconder os algoritmos internos destas ferramentas e dificultam a adição de dados in-vivo nestes trabalhos. Este trabalho explora esta lacuna deixada por aqueles autores. Elaboramos um arcabouço computacional capaz de reproduzir os fenômenos óticos e fisiológicos do sistema visual. Construímos com superfícies quádricas os modelos esquemáticos do olho humano e propomos um algoritmo de traçado de raio realístico. Então realizamos um estudo nos modelos esquemáticos e a partir deles mais a adição de dados in-vivo obtidos de um topógrafo de córnea extraímos informações óticas destes modelos. Calculamos os coeficientes e Zernike dos modelos para tamanhos diversos de pupila e obtivemos medidas de aberração do olho humano. Os resultados encontrados estão de acordo com os trabalhos relacionados e as simulações com dados in-vivo estão consoantes com as produzidas por um aparelho de frente de onda comerciais. Este trabalho é um esforço em aproveitar as informações adquiridas pelos equipamentos modernos de oftalmologia, além de auxiliar o entendimento de sistemas visuais biológicos acabam também em auxiliar a elaboração de sistemas de visão artificial e os projetistas de sistemas óticos / The increase in performance of the modern computers has driven scientific work in the areas of computer simulation. Many authors use in their research commercial tools that use embedding algorithms, which sources are not provided, and it makes harder and sometimes impossible, the development of novel theories or experiments. This work explores this gap left for those authors. We present a computational framework capable to reproduce the optical and physiological phenomena of the human visual system. We construct schematical models of the human eye from quadrics surfaces and consider an algorithm of realistic ray tracing. Afterward, we performed a study on schematics models and in addition we introduce, in these models, in-vivo data obtained from corneal topography machine and extract optical information. We calculate the Zernike coefficients in the models for different sizes of pupil and measures of aberration of the human eye. The results are in agreement with related work and simulations with in-vivo data are according with the produced by a commercial wave-front device. This work is an effort in using to advantage the information acquired for the modern equipment of ophthalmology, besides assisting the understanding of biological visual systems, it also helps the development of artificial vision systems and the designing of optical systems

This thesis aims to solve the mathematical inverse problem of characterizing sea waves based on the responses obtained from a marine vessel sailing under certain sea conditions. By researching this problem the thesis contributes to the marine industry by improving products that are using ocean behavior for controlling ship's dynamics. Knowledge about the current state of the sea, such as the wave frequency and height, is important for navigation, control, and for the safety of a vessel. This information can be retrieved from specialized weather reports. However, such information is not at all time possible to obtain during a voyage, and if so usually comes with a certain delay. Therefore this thesis seeks solutions that can estimate on-line the waves' state using methods in the field of Artificial Intelligence. The specific investigation methods are Transfer Functions augmented with Genetic Algorithm, Artificial Neural Networks and Case-Based Reasoning. These methods have been configured and validated using the n-fold cross validation method. All the methods have been tested with an actual implementation. The algorithms have been trained with data acquired from a marine simulation program developed in Simulink. The methods have also been trained and tested using monitored data acquired from an actual ship sailing on the Baltic Sea as well as wave data obtained from a buoy located nearby the vessel's route. The proposed methods have been compared with state-of-the art reports in order evaluate the novelty of the research and its potential applications in industry. The results in this thesis show that the proposed methods can in fact be used for solving the inverse problem. It was also found that among the investigated methods it is the Transfer Function augmented with Genetic Algorithm which yields best results. This Master Thesis is conducted under the Master of Engineering Program in Robotics at Mälardalens högskola in Västerås, Sweden. The thesis was proposed by Q-TAGG R&D AB in Västerås, Sweden, a company which specializes in marine vessel dynamics research.

Cette thèse est consacrée à l’étude de la stabilisation de certains systèmes distribués avec contrôle frontière de type dynamique. Nous considérons, d’abord, la stabilisation de l’équation de la poutre de Rayleigh avec un seul contrôle frontière dynamique moment ou force. Nous montrons que le système n’est pas uniformément (autrement dit exponentiellement) stable; mais par une méthode spectrale, nous établissons le taux polynomial optimal de décroissance de l’énergie du système. Ensuite, nous étudions la stabilisation indirecte de l’équation des ondes avec un amortissement frontière de type dynamique fractionnel. Nous montrons que le taux de décroissance de l’énergie dépend de la nature géométrique du domaine. En utilisant la méthode fréquentielle et une méthode spectrale, nous montrons la non stabilité exponentielle et nous établissons, plusieurs résultats de stabilité polynomiale. Enfin, nous considérons l’approximation de l’équation des ondes mono-dimensionnelle avec un seul amortissement frontière de type dynamique par un schéma de différence finie. Par une méthode spectrale, nous montrons que l’énergie discrétisée ne décroit pas uniformément (par rapport au pas du maillage) polynomialement vers zéro comme l’énergie du système continu. Nous introduisons, alors, un terme de viscosité numérique et nous montrons la décroissance polynomiale uniforme de l’énergie de notre schéma discret avec ce terme de viscosité. / This thesis is devoted to the study of the stabilization of some distributed systems with dynamic boundary control. First, we consider the stabilization of the Rayleigh beam equation with only one dynamic boundary control moment or force. We show that the system is not uniformly (exponentially) stable. However, using a spectral method, we establish the optimal polynomial decay rate of the energy of the system. Next, we study the indirect stability of the wave equation with a fractional dynamic boundary control. We show that the decay rate of the energy depends on the nature of the geometry of the domain. Using a frequency approach and a spectral method, we show the non exponential stability of the system and we establish, different polynomial stability results. Finally, we consider the finite difference space discretization of the 1-d wave equation with dynamic boundary control. First, using a spectral approach, we show that the polynomial decay of the discretized energy is not uniform with respect to the mesh size, as the energy of the continuous system. Next, we introduce a viscosity term and we establish the uniform (with respect to the mesh size) polynomial energy decay of our discrete scheme.

Target of this thesis was to design servo-mechanism suitable for control system of small and speedy aircraft, such as business jets and light multi-purpose attack aircraft. Main task was to use suggested characteristics for computer analysis and determine impact of their changes on servo-mechanism properties. Further on, experimental way of determining these parameters.

This doctoral thesis is focused on problems of modulators based on six-ports. It begins with description of current state of the art of six-ports used like modulators, their transfer functions and SIW technology. A design part of this thesis consists from experimental six-port based on substrate integrated waveguide (SIW) technology. There is presented step-by-step development of this six-port using this technology and also there is introduced micro-strip technology based six-port. Final design of six-ports and variable impedances were measured, the results are discussed and compared with expected ones in next chapters. Second part of this thesis deals with influences of internal parameters of six-ports to final signal transmission and derives theirs transfer functions for more than one reflection in structure. The computation results are compared with experimental measurements for fixed loads. With using of ideal loads sweeps, modulations with shaped input signals were calculated. For designed variables impedances, there was founded the optimal biasing points for demanded IQ diagram and discussed which from tested active circuit is suitable. In the last part there are shown results of experiment with these variable loads connected to both types of designed six-ports.

Disertační práce se věnuje využití umělých neuronových sítí pro modelování elektromagnetických polí uvnitř automobilů. První část práce je zaměřena na analytický popis šíření elektromagnetických vlny interiérem pomocí Nortonovy povrchové vlny. Následující část práce se věnuje praktickému měření a ověření analytických modelů. Praktická měření byla zdrojem trénovacích a verifikačních dat pro neuronové sítě. Práce se zaměřuje na kmitočtová pásma 3 až 11 GHz a 55 až 65 GHz.

Thesis describes analog filters topologies with capability of tuning of the main parameters and the MOSFET-C and switched-capacitor filters are described. With focus to linearity and maximal tuning range optimal topology have been chosen. In work the issue of analog switch design is described and is solved. Design of switched-capacitor low-pass Sallen-key filter in Cadence software was made and simulation results are presented.

This thesis discusses the utilization of the artificial neural networks (ANN) for detection of coronary artery disease (CAD) in frequency area. The first part of this thesis is orientated towards the theoretical knowledge. Describes the issue of ECG pathological changes. ECQ are converted to frequency area. Described statistical methods and methods for automatic detection of CAD and MI. Explained the issue of the perceptron and ANN. The second deals with use of Neural Network Toolbox MATLAB®. This part focuses on counting and finding suitable parameters and making connection of band. At the end of the thesis UNS is used to detect ischemic parameters and the results are discussed. Average values for the best settings are 100% accuracy.

Ground anchors represent an important structural element in the area of ground engineering. Despite an extensive usage of these elements, their design is usually performed using simple empirical and semi-empirical methods. An application of these procedures brings to the design a number of simplifying assumptions. The goal of the dissertation is to refine the computational design of ground anchors, analysis and quantification of selected factors significantly affecting their load displacement behavior. Firstly, the finite element method is applied. Two novel constitutive models are used: Multilaminate Constitutive Model for Stiff Soils (Schädlich, 2012) involving post peak shear softening of overconsolidated cohesive soils and Shotcrete Model (Schädlich, 2014) involving tension softening after tensile strength is reached. First constitutive model was used in order to simulate progressive decrease of skin friction along the anchor fixed length. Second constitutive model was applied for the grout material. In the next step, experimental program including several anchor load tests was carried out. The goal of the experimental program was to confirm conclusions from numerical studies and to obtain relevant data for further back – analysis. A newly developed application, in which all the findings from numerical computations and experimental measurements are incorporated, is described afterwards. The application is based on the use of so-called load-transfer functions. The program verification was conducted through series of back analysis of investigation anchor load tests realized on four different construction sites in two different types of fine-grained soils. The verification of the application is followed by series of parametric studies in which an influence of input parameters values is analyzed. Dissertation is concluded by the summarization of the most important findings.

Gegenstand der vorliegenden Dissertation ist die Entwicklung von Kalibrierverfahren und Algorithmen zur Bildverarbeitung im Kontext von Multiprojektorsystemen mit dem Ziel, die Einsatzmöglichkeiten von derartigen Anlagen zu erweitern und die Nutzerakzeptanz solcher Systeme zu steigern. Die Arbeit konzentriert sich dabei insbesondere auf (annähernd) planare Mehrsegment-Projektionsanlagen, die aus preisgünstigen, nicht speziell für den Visualisierungbereich konzipierten Consumer- und Office-Projektoren aufgebaut werden. Im ersten Teil der Arbeit werden bestehende Verfahren zur geometrischen Kalibrierung, zum Edge-Blending sowie zur Helligkeits- und Farbanpassung auf ihre Eignung im Hinblick auf die Anforderungen untersucht und Erweiterungen entwickelt. Für die kamerabasierte Geometrie- Kalibrierung wird mit Lininenpattern gearbeitet, wobei ein effizienter rekursiver Algorithmus zur Berechnung der Schnittpunkte bei leicht gekrümmten Oberflächen vorgestellt wird. Für das Edge-Blending wird ein generalisiertes Modell entwickelt, das mehrere bestehende Ansätze kombiniert und erweitert. Die vorgenommene Modifikation der Distanzfunktion erlaubt insbesondere die bessere Steuerung des Helligkeitsverlaufs und ermöglicht weichere Übergänge an den Grenzen der Überlappungszonen. Es wird weiterhin gezeigt, dass das Edge-Blending mit bestehenden Ansätzen zum Ausgleich der Helligkeitsunterschiede wie Luminance Attenutation Maps kombiniert werden kann. Für die photometrische Kalibrierung ist die Kenntnis der Farb-Transferfunktion, also der Abbildung der Eingabe-Farbwerte auf die tatsächlich vom Projektor erzeugten Ausgaben, unerlässlich. Die herkömmlichen Ansätze betrachten dabei vorwiegend RGB-Projektoren, bei denen die dreidimensionale Transferfunktion in drei eindimensionale Funktionen für jeden Farbkanal zerlegt werden kann. Diese Annahme trifft jedoch auf die betrachteten Projektoren meist nicht zu. Insbesondere DLP-Projektoren mit Farbrad verfügen oft über zusätzliche Grundfarben, so dass der Farbraum deutlich von einem idealen RGB-Modell abweicht. In dieser Arbeit wird zunächst ein empirisches Modell einer Transferfunktion vorgestellt, das sich für derartige Projektoren besser eignet, allerdings die Helligkeit der Projektoren nicht vollständig ausnutzt. Im zweiten Teil der Arbeit wird ein kamerabasiertes Messverfahren entwickelt, mit dem direkt die dreidimensionale Farb-Transferfunktion ermittelt werden kann. Gegenüber bestehenden Verfahren werden tausende von Farbsamples gleichzeitig erfasst, so dass die erreichbare Sampledichte unter praxisrelevanten Messbedingungen von 17x17x17 auf 64x64x64 erhöht und damit die Qualität der photometrischen Kalibrierung signifikant gesteigert werden kann. Weiterhin wird ein Schnellverfahren entwickelt, dass die Messungsdauer bei 17x17x17 Samples von mehreren Stunden mit bisherigen Verfahren auf weniger als 30 Minuten reduziert. Im dritten Teil werden Algorithmen zur effizienten Bildverarbeitung entwickelt, die der GPU-basierten Anwendung der Kalibrierparameter auf die darzustellenden Bilddaten in Echtzeit dienen. Dabei werden die Möglichkeiten zur Vermeidung redundanter Berechnungsschritte beim Einsatz Stereoskopie-fähiger Projektoren ausgenutzt. Weiterhin wird das eigentliche Kalibrierverfahren effizient mit Verfahren zur Konvertierung von stereoskopischen Bildverfahren kombiniert. Es wird gezeigt, dass ein einzelner PC aus Standardkomponenten zur Ansteuerung einer Mehrsegment-Projektionsanlage mit bis zu 6 Projektoren ausreicht. Die Verwendung von DVI-Capture-Karten ermöglicht dabei den Betrieb einer solchen Anlage wie einen "großen Monitor" für beliebige Applikationen und Betriebssysteme.