1 |
The Development and Deployment of a GIS tool for Transit Network DesignSimard, Stephanie January 2010 (has links)
Public transportation contributes to sustainable transportation in urban areas. Unfortunately, in some cases public transit systems have been underperforming. Over the years, factors such as urban sprawl and the increase in private vehicle ownership have led to challenges for public transportation providers. The lack of investment in transit infrastructure has resulted in transit agencies being under resourced which further limit the agencies’ ability to respond. Realizing the need to change and move towards a more sustainable and balanced transportation system, governments have begun to invest more and more in transportation infrastructure projects.
In order to encourage public transportation, focus has shifted to improving the quality of transit service being provided. There are many ways in which transit improvements can be made. The problem that describes the design of a public transportation network is referred to as the transit network design problem (TNDP). Much of the existing literature that addresses the TNDP describes methods that are rigorous and complex and have limited application in practice. Given the emergence of geographic information systems (GIS), there exists new opportunities to address the TNDP.
This thesis presents a customized GIS tool that assists transit network design. The approach utilizes GIS to identify desire lines or major travel demand corridors from which trunk transit routes are proposed and evaluated. The GIS tool is built using VBA scripting in ArcMap 9.3 part of ESRI’s general ArcGIS suite but the underlying GIS functionality needed by the tool is not limited to ESRI software. The tool offers a proven methodology for use within transit network design and evaluation at a level of resource requirement that is consistent with most transit agencies. The tool has been customized to minimize the need for GIS training and to maximize its adaptability for application in multiple cities. The analyst applying the tools must have substantial knowledge of local conditions.
The tool is applied to the Regional Municipality of Waterloo, Ontario, Canada, at the TAZ (traffic analysis zone) level using population and employment data. A street network with corresponding posted speeds on each link and the location of signalized intersections were also used in the analysis. The results of the analysis depicted major flows throughout Kitchener, Waterloo and Cambridge. Unique flows from students, major employers and an analysis of average income levels also provide input into the major demand corridors. From these results seven high order transit routes were designed to accommodate the major demand corridors.
From the results it was found that GIS can be used to depict major demand corridors and inform transit network design. GIS is an excellent tool that can display complex information and visually identify spatial patterns. Further research includes the development of a model that evaluates network alternatives or the development of quantitative methods by which limits on aggregation can be automated.
|
2 |
The Development and Deployment of a GIS tool for Transit Network DesignSimard, Stephanie January 2010 (has links)
Public transportation contributes to sustainable transportation in urban areas. Unfortunately, in some cases public transit systems have been underperforming. Over the years, factors such as urban sprawl and the increase in private vehicle ownership have led to challenges for public transportation providers. The lack of investment in transit infrastructure has resulted in transit agencies being under resourced which further limit the agencies’ ability to respond. Realizing the need to change and move towards a more sustainable and balanced transportation system, governments have begun to invest more and more in transportation infrastructure projects.
In order to encourage public transportation, focus has shifted to improving the quality of transit service being provided. There are many ways in which transit improvements can be made. The problem that describes the design of a public transportation network is referred to as the transit network design problem (TNDP). Much of the existing literature that addresses the TNDP describes methods that are rigorous and complex and have limited application in practice. Given the emergence of geographic information systems (GIS), there exists new opportunities to address the TNDP.
This thesis presents a customized GIS tool that assists transit network design. The approach utilizes GIS to identify desire lines or major travel demand corridors from which trunk transit routes are proposed and evaluated. The GIS tool is built using VBA scripting in ArcMap 9.3 part of ESRI’s general ArcGIS suite but the underlying GIS functionality needed by the tool is not limited to ESRI software. The tool offers a proven methodology for use within transit network design and evaluation at a level of resource requirement that is consistent with most transit agencies. The tool has been customized to minimize the need for GIS training and to maximize its adaptability for application in multiple cities. The analyst applying the tools must have substantial knowledge of local conditions.
The tool is applied to the Regional Municipality of Waterloo, Ontario, Canada, at the TAZ (traffic analysis zone) level using population and employment data. A street network with corresponding posted speeds on each link and the location of signalized intersections were also used in the analysis. The results of the analysis depicted major flows throughout Kitchener, Waterloo and Cambridge. Unique flows from students, major employers and an analysis of average income levels also provide input into the major demand corridors. From these results seven high order transit routes were designed to accommodate the major demand corridors.
From the results it was found that GIS can be used to depict major demand corridors and inform transit network design. GIS is an excellent tool that can display complex information and visually identify spatial patterns. Further research includes the development of a model that evaluates network alternatives or the development of quantitative methods by which limits on aggregation can be automated.
|
3 |
Simulation-based optimisation of public transport networksNnene, Obiora Amamifechukwu 15 October 2020 (has links)
Public transport network design deals with finding the most efficient network solution among a set of alternatives, that best satisfies the often-conflicting objectives of different network stakeholders like passengers and operators. Simulation-based Optimisation (SBO) is a discipline that solves optimisation problems by combining simulation and optimisation models. The former is used to evaluate the alternative solutions, while the latter searches for the optimal solution among them. A SBO model for designing public transport networks is developed in this dissertation. The context of the research is the MyCiTi Bus Rapid Transit (BRT) network in the City of Cape Town, South Africa. A multi-objective optimisation algorithm known as the Non-dominated Sorting Genetic Algorithm (NSGA-II) is integrated with Activity-based Travel Demand Model (ABTDM) known as the Multi-Agent Transport Simulation (MATSim). The steps taken to achieve the research objectives are first to generate a set of feasible network alternatives. This is achieved by manipulating the existing routes of the MyCiTi BRT with a computer based heuristic algorithm. The process is guided by feasibility conditions which guarantee that each network has routes that are acceptable for public transport operations. MATSim is then used to evaluate the generated alternatives, by simulating the daily plans of travellers on each network. A typical daily plan is a sequential ordering of all the trips made by a commuter within a day. Automated Fare Collection (AFC) data from the MyCiTi BRT was used to create this plan. Lastly, the NSGA-II is used to search for an efficient set of network solutions, also known as a Pareto set or a non-dominated set in the context of Multi-objective Optimisation (MOO). In each generation of the optimisation process, MATSim is used to evaluate the current solution. Hence a suitable encoding scheme is defined to enable a smooth iv translation of the solution between the NSGA-II and MATSim. Since the solution of multi-objective optimisation problems is a set of network solutions, further analysis is done to identify the best compromise solution in the Pareto set. Extensive computational testing of the SBO model has been carried out. The tests involve evaluating the computational performance of the model. The first test measures the repeatability of the model's result. The second computational test considers its performance relative to indicators like the hypervolume and spacing indicators as well as an analysis of the model's Pareto front. Lastly, a benchmarking of the model's performance when compared with other optimisation algorithms is carried out. After testing the so-called Simulation-based Transit Network Design Model (SBTNDM), it is then used to design pubic transport networks for the MyCiTi BRT. Two applications are considered for the model. The first application deals with the public transport performance of the network solutions in the Pareto front obtained from the SBTNDM. In this case study, different transport network indicators are used to measure how each solution performs. In the second scenario, network design is done for the 85th percentile of travel demand on the MyCiTi network over 12 months. The results show that the model can design robust transit networks. The use of simulation as the agency of optimisation of public transport networks represents the main innovation of the work. The approach has not been used for public transport network design to date. The specific contribution of this work is in the improved modelling of public transport user behaviour with Agent-based Simulation (ABS) within a Transit Network Design (TND) framework. This is different from the conventional approaches used in the literature, where static trip-based travel demand models like the four-step model have mostly been used. Another contribution of the work is the development of a robust technique that facilitates the simultaneous optimisation of network routes and their operational frequencies. Future endeavours will focus on extending the network design model to a multi-modal context.
|
4 |
Projeto de redes otimizadas de transporte público por ônibus utilizando algoritmo genético. / Bus transit network design using genetic algorithm.Arbex, Renato Oliveira 17 November 2014 (has links)
Esta dissertação trata do problema do projeto de redes de transporte público por ônibus, que consiste em estabelecer as linhas de ônibus a serem operadas e seus respectivos trajetos e frequências. Busca-se determinar uma rede de tal forma a minimizar custos de operadores e usuários, constituindo um problema multiobjetivo. O custo dos operadores é representado tanto pela frota como pela quilometragem total necessária para atender às frequências exigidas; já o custo dos usuários é representado pela soma dos tempos de espera, tempos de viagem dentro do veículo e eventuais penalidades de transferência. Dado tratar-se de um problema multiobjetivo, de natureza combinatória e complexo, é proposto um método de solução baseado na metaheurística Algoritmo Genético. O mesmo baseia-se na construção inicial de um banco de rotas viáveis, e cada solução proposta é formada selecionando-se um subconjunto de rotas deste banco para formar a rede. São aplicadas estratégias de busca por soluções viáveis nos operadores do Algoritmo Genético, devido à grande proporção de indivíduos inviáveis. O modelo é avaliado através de uma instância de teste da literatura e os resultados são comparados com os já obtidos em trabalhos anteriores. A melhor solução encontrada através do método descrito deste trabalho é superior às já reportadas na literatura. Uma análise de sensibilidade foi realizada para avaliar a influência de parâmetros de entrada do modelo na qualidade das soluções. Um Sistema de Visualização foi desenvolvido para representar graficamente as linhas de ônibus e demais variáveis das soluções. Sugere-se, ao final do trabalho, um conjunto de pesquisas futuras associadas à melhoria do modelo. / This dissertation addresses the public transport network design problem, which comprises determining the bus routes, their associated itineraries and frequencies. The network is designed as to minimize operators and users costs, creating a multiobjective problem. Operators costs are represented by the total fleet and mileage necessary to address required frequencies while user costs are represented by the sum of waiting times, in-vehicle travel times and possible transfer penalties. Given the complexity of this combinatorial and multiobjective problem, a solution method, based on the genetic algorithm metaheuristic, is proposed. Initially a database of feasible routes is built, and each proposed solution is formed by selecting a subset of routes from the database to form the network. Feasibility search strategies are applied inside genetic algorithms operators to make up for the large number of unfeasible individuals. The model is evaluated with a small network and the results are compared with those obtained in previous studies. The best solution attained with the present method is superior to previously published results. A sensitivity analysis was conducted to evaluate the influence of different model input parameters on solution quality. A Visualization System was developed to graphically represent the solutions bus lines and other variables. A set of future research ideas, related to the model improvement, are presented at the end of this study.
|
5 |
[en] IMPROVEMENT IN HEURISTIC METHOD FOR THE SOLUTION OF THE URBAN PUBLIC TRANSPORT NETWORK DESIGN PROBLEM / [pt] MELHORIAS EM UM MÉTODO HEURÍSTICO PARA A SOLUÇÃO DO PROBLEMA DE DESENHO DE REDE DE TRANSPORTE PÚBLICO URBANOLORENA HERNANDEZ MASTRAPA 05 October 2017 (has links)
[pt] Atualmente mais da metade da população mundial mora em cidades. O deslocamento na região urbana, mediante a utilização de transporte público se dificulta devido ao planejamento deficiente das rotas e redes de transporte, longos tempos de viagem, aumento do custo das passagens, dos tempos de espera, etc. Como consequência, a busca de operações mais eficientes no sistema de transporte público urbano tem aumentado visando atender as necessidades de transporte de forma mais sustentável. Após a revisão da literatura relacionada ao problema de desenho de rede de transporte público urbano, foi escolhido o método proposto por Aquino, (1980), aplicável para redes de ônibus urbanos. Por médio da modernização do programa do método escolhido e as melhorias nele, o número de rotas que define a rede conectada diminuiu. O número de transbordos na rede foi minimizado até zera-lo com um menor conjunto de rotas. Análise de indicadores e de rentabilidade das rotas que minimizam o número de transbordo na rede, permite ao planejador ter uma visão geral do comportamento dessas rotas possibilitando tomar decisões mantendo os requerimentos iniciais e o objetivo de estudo. O programa do método desenvolvido, adaptado a uma linguagem moderna, Cmais mais, oferece, tanto ao meio acadêmico quanto ao profissional, uma ferramenta de fácil aplicação para dar solução ao Problema de Desenho de Rede de Transporte Público Urbano. Contribuindo potencialmente ao incremento da eficiência do processo de planejamento e, portanto, à redução de não conformidades do serviço de transporte resultando em economia dos custos para as empresas prestadoras deste serviço. / [en] Nowadays, more than half of the world s population lives in cities. Displacement in the urban area through the use of public transportation is hampered by poor planning of transport routes and networks, long travel times, increased ticket costs and waiting times, etc. As a consequence, the search for more efficient operations in the urban public transport system has increased in order to meet the transport needs in a more sustainable way. After the literature review related to the urban public transport network design problem, the method proposed by Aquino (1980), applicable to urban bus networks, was chosen. By means of the program s modernization of the chosen method and the improvements in it, the number of routes defining the connected network has decreased. The overflow number on the network has been minimized to zero with a smaller set of routes. Analysis of indicators and profitability of the routes that minimize the number of transfer in the network, allows the planner to have an overview of the behavior of these routes allowing to make decisions keeping the initial requirements and the objective of study. The developed method program, adapted to a modern language, C plus plus, offers both an academic and a professional environment an easy application tool to solve the Urban Public Transport Network Design Problem. Potentially contributing to the increase of the efficiency of the planning process and, therefore, to the reduction of nonconformities of the transport service, resulting in cost savings for the companies that provide this service.
|
6 |
Projeto de redes otimizadas de transporte público por ônibus utilizando algoritmo genético. / Bus transit network design using genetic algorithm.Renato Oliveira Arbex 17 November 2014 (has links)
Esta dissertação trata do problema do projeto de redes de transporte público por ônibus, que consiste em estabelecer as linhas de ônibus a serem operadas e seus respectivos trajetos e frequências. Busca-se determinar uma rede de tal forma a minimizar custos de operadores e usuários, constituindo um problema multiobjetivo. O custo dos operadores é representado tanto pela frota como pela quilometragem total necessária para atender às frequências exigidas; já o custo dos usuários é representado pela soma dos tempos de espera, tempos de viagem dentro do veículo e eventuais penalidades de transferência. Dado tratar-se de um problema multiobjetivo, de natureza combinatória e complexo, é proposto um método de solução baseado na metaheurística Algoritmo Genético. O mesmo baseia-se na construção inicial de um banco de rotas viáveis, e cada solução proposta é formada selecionando-se um subconjunto de rotas deste banco para formar a rede. São aplicadas estratégias de busca por soluções viáveis nos operadores do Algoritmo Genético, devido à grande proporção de indivíduos inviáveis. O modelo é avaliado através de uma instância de teste da literatura e os resultados são comparados com os já obtidos em trabalhos anteriores. A melhor solução encontrada através do método descrito deste trabalho é superior às já reportadas na literatura. Uma análise de sensibilidade foi realizada para avaliar a influência de parâmetros de entrada do modelo na qualidade das soluções. Um Sistema de Visualização foi desenvolvido para representar graficamente as linhas de ônibus e demais variáveis das soluções. Sugere-se, ao final do trabalho, um conjunto de pesquisas futuras associadas à melhoria do modelo. / This dissertation addresses the public transport network design problem, which comprises determining the bus routes, their associated itineraries and frequencies. The network is designed as to minimize operators and users costs, creating a multiobjective problem. Operators costs are represented by the total fleet and mileage necessary to address required frequencies while user costs are represented by the sum of waiting times, in-vehicle travel times and possible transfer penalties. Given the complexity of this combinatorial and multiobjective problem, a solution method, based on the genetic algorithm metaheuristic, is proposed. Initially a database of feasible routes is built, and each proposed solution is formed by selecting a subset of routes from the database to form the network. Feasibility search strategies are applied inside genetic algorithms operators to make up for the large number of unfeasible individuals. The model is evaluated with a small network and the results are compared with those obtained in previous studies. The best solution attained with the present method is superior to previously published results. A sensitivity analysis was conducted to evaluate the influence of different model input parameters on solution quality. A Visualization System was developed to graphically represent the solutions bus lines and other variables. A set of future research ideas, related to the model improvement, are presented at the end of this study.
|
7 |
Designing multimodal public transport networks using metaheuristicsFletterman, Manuel 16 January 2009 (has links)
The public transport system in South Africa is in a precarious state, capturing no more than 50% of the passenger market. The three public transport modes that are currently utilized—train, bus, and minibus-taxi—are competing for market share instead of complementing one another. Furthermore, most public transport networks have not been properly redesigned over the past three decades. Improvements were initiated reactively in the past: transit stops and routes were added or removed from the network when demand fluctuated. This reactive process has diminished the confidence of commuters in the public transport networks, forcing commuters to use private transport. A proactive redesign method is needed—one that includes all the modes of public transport, and anticipates an increase in demand and rapid development in geographic areas, while ensuring good accessibility to the network. Current network design models do not include multiple modes of public transport, and are based on the geographical layout of developed cities and their particularities, which makes them unsuitable for the South African environment with its unique land use disparities. This dissertation proposes a multimodal network design model that is capable of designing real world and large scale networks for the South African metropolitan areas. The City of Tshwane Metropolitan Municipality (CTMM) transport network area was used to develop and test the model, which consists of four components. The Geographic Information System (GIS) component has a central role in storing, manipulating, and exchanging the geographic data within the model. For the GIS the appropriate input data is identified, and a design for the geo-database is proposed. The Population Generation Algorithm (PGA) component translates the demographic data into point data representing the transit demand in the study area. The Bus Stop Placement Algorithm (BSPA) component is a metaheuristic that searches for near-optimal solutions for the placement of bus stops in the study area. A novel solution approach proposed in this dissertation uses geographic data of commuters to evaluate the bus stop placement in the study area. The Multimodal Network Design Algorithm (MNDA) component also employs a metaheuristic, enabling the design of near-optimal multimodal networks. The addition of multiple modes to the Transit Network Design Problem (TNDP) is also a novel and significant contribution. The two metaheuristic components are first tested on a test network, and subjected to a comprehensive sensitivity analysis. After identifying suitable parameter values and algorithm settings, the components are applied to the entire CTMM. / Dissertation (MSc)--University of Pretoria, 2009. / Industrial and Systems Engineering / unrestricted
|
8 |
Modelo matemático para o projeto de redes cicloviárias integradas ao sistema de transporte público por ônibus em áreas urbanas /Oliveira, Stefano Petrini January 2020 (has links)
Orientador: Antônio Fernando Branco Costa / Resumo: O presente trabalho desenvolveu um modelo matemático que contribui para o projeto de redes cicloviárias conexas e integradas ao sistema de transporte público por ônibus em áreas urbanas, fazendo uso da Otimização Multiobjetivo (OM) por meio da Programação Linear Inteira Mista (MILP ou MIP). A investigação dos critérios de infraestrutura que influenciam a demanda cicloviária e que deveriam compor a modelagem matemática foi realizada por meio da Revisão da Literatura e cinco critérios identificados, referentes ao: Conforto, Segurança, Objetividade, Intermodalidade e Continuidade. Cada critério é composto por uma série de subcritérios, dezesseis no total, classificados como parâmetros de projeto de entrada e/ou de saída para o modelo matemático, segundo funções objetivos e restrições. Uma aplicação do modelo foi realizada em um caso real para cidade de grande porte, em São José dos Campos – SP, e obtidas soluções exatas com redes parcialmente conexas (abordagem 1) e redes totalmente conexas (abordagem 2), integradas aos pontos de parada de ônibus e as linhas de ônibus da região delimitada, por meio da linguagem de modelagem General Algebric Modeling System (GAMS) e o solver CPLEX. Os resultados obtidos foram aderentes a realidade da macrozona de tráfego na região estudada e contribuem para o planejamento urbano como validado pela Secretaria de Mobilidade Urbana de São José dos Campos. A análise de diversos cenários para o modelo matemático, ponderando os objetivos do modelo, pos... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The present work created a mathematical model that contributes to design bikeway networks integrated to the public transport service by buses in urban areas, using the Network Multiobjective Optimization through Mixed by means of Mixed Integer Linear Programming (MILP or MIP). The investigation of the infrastructure criteria that influence cycling demand and that should set the mathematical modeling was carried out through the Literature Review and five criteria were identified, referring to: Comfort, Safety, Objectivity, Intermodality and Connectivity. Each criteria is composed of a subcriteria set, sixteen in total, which performed as input and/or output design parameters for the mathematical model, according to fitness functions and constraints. An application of the model was carried out in a real case in São Jose dos Campos city - Sao Paulo state, and exact solutions were obtained with partially connected networks (approach 1) and fully connected networks (approach 2), integrated to the stop points by bus and bus lines in the defined region, using the General Algebric Modeling System (GAMS) modeling language and the CPLEX solver. The results obtained were adherent to the reality of the traffic macrozone in the studied region and contribute to urban planning, as validated by the São José dos Campos Urban Mobility Secretariat. The analysis of several scenarios for the mathematical model, considering the model's objectives, made it possible to verify the behavior of the res... (Complete abstract click electronic access below) / Doutor
|
Page generated in 0.0575 seconds