The rapidly growing demand for UWB as high data rates wireless communications technology, since the Federal Communications Commission (FCC) allocated the bandwidth of UWB from 3.1GHz to 10.6 GHz. Antenna also plays an essential role in UWB system. However, there are some difficulties in designing UWB antenna as compared to narrowband antenna. The primary requirement of UWB antennas is be able to operate over frequencies released by the FCC. Moreover, the satisfaction of radiation properties and good time domain performance over the entire frequency range are also necessary. In this thesis, designing and analysing printed crescent shape monopole antenna, Planar Inverted F-L Antenna (PIFLA) and Planar Inverted FF Antenna (PIFFA) are focused. A Planar Inverted FF Antenna (PIFFA) can be created to reduce the potential for interference between a UWB system and other communications protocols by using spiral slot. The antennas exhibits broadside directional pattern. The performances such as return loss, radiation pattern and current distribution of the UWB antennas are extensively investigated and carried out. All the results have been demonstrated using simulation and experimentally whereby all results satisfy the performance under - 10dB point in the bandwidth of UWB. In addition the miniaturization of MIMO/diversity Planar Inverted-F antenna (PIFA) which is suitable for pattern diversity in UWB applications is presented. This antenna assembly is formed by two identical PIFAs, a T-shaped decoupling structure which connects the two PIFAs and a finite ground plane with a total compact envelope dimension of 50 x 90 x 7.5mm³. The radiation performance of the proposed MIMO antenna was quite encouraging and provided an acceptable agreement between the computed and measured envelope correlation coefficient and channel capacity loss.

Depuis 2002, différentes bandes de fréquences de plusieurs GHz dites « Ultra-Large Bande » (ULB), généralement comprises entre 3,1GHz et 10,6GHz, ont été libérées de par le monde pour la transmission d’informations sans fil. La largeur de ces bandes est telle qu’il devient envisageable d’utiliser des impulsions comme support de l’information en lieu et place d’une porteuse modulée comme cela est le cas habituellement. En effet, le spectre d’une impulsion étant inversement proportionnel à sa durée, une large plage de fréquences est requise pour la transmission d’informations via des impulsions. Cependant, il devient possible d’accroitre les débits en rapprochant les impulsions émises lorsque ceci est nécessaire, tout en offrant la possibilité d’éteindre les circuits et donc réduire la consommation lorsque deux impulsions sont suffisamment éloignées dans le temps.Le travail de recherche de cette thèse est dans ce contexte de proposer une structure d’émetteur impulsionnel reconfigurable disposant d’un contrôle suffisamment fin pour s’adapter aux différents canaux des standards IEEE 802.15.4 et 802.15.6 et ce, en n’utilisant que des circuits numériques pour les besoins des applications faibles coût. Pour cela, une étude théorique sur la mise en forme des impulsions requises est faite. Puis, il est question de la conception des différentes fonctions nécessaires à la mise en œuvre d’un émetteur impulsionnel reconfigurable, telles qu’un oscillateur contrôlé en tension pour la bande 3,1GHz-10,6GHz à démarrage rapide et que le circuit de mise en forme des oscillations associé. / Since 2002, various frequency bands of several GHz called "Ultra-WideBand" (UWB), generally between 3,1GHz and 10,6GHz, were liberalized in the world for wireless data transmission. The width of these bands is that it becomes possible to use pulses instead of a modulated carrier to transmit data. Indeed, as the spectrum of a pulse is inversely proportional to its duration, a wide range of frequencies is required for the transmission of information via pulses. However, it becomes possible to increase the rates by moving closer the emitted pulses when this is necessary, while providing the ability to switch off the circuits and thus reduce power consumption when two pulses are sufficiently far in time.To standardize the use of UWB frequency bands, standards such as IEEE 802.15.4 and 802.15.6 standards have emerged and have chosen to cut these frequency bands in channels of 500MHz and more. The aim of this thesis is also to propose a reconfigurable pulse transmitter structure with a fine enough control to address the different channels of IEEE 802.15.4 and 802.15.6 standard and, using only digital circuits to target low cost applications. For this, a theoretical study on the shaping of pulses required is made. Then it comes to the design of the various functions necessary for the implementation of a reconfigurable pulse transmitter, such as the implementation of a voltage controlled oscillator for 3,1GHz band-10,6GHz with quick start ability and the required oscillations shaping circuit.

Large-dimensional communication systems are likely to play an important role in modern wireless communications, where dimensions can be in space, time, frequency and their combinations. Large dimensions can bring several advantages with respect to the performance of communication systems. Harnessing such large-dimension benefits in practice, however, is challenging. In particular, optimum signal detection gets prohibitively complex for large dimensions. Consequently, low-complexity detection techniques that scale well for large dimensions while achieving near-optimal performance are of interest. Belief Propagation (BP) is a technique that solves inference problems using graphical models. BP has been successfully employed in a variety of applications including computational biology, statistical signal/image processing, machine learning and artificial intelligence. BP is well suited in several communication problems as well; e.g., decoding of turbo codes and low-density parity check codes (LDPC), and multiuser detection. We propose a BP based algorithm for detection in large-dimension linear vector channels employing binary phase shift keying (BPSK) modulation, by adopting a Markov random field (MRF)graphical model of the system. The proposed approach is shown to achieve i)detection at low complexities that scale well for large dimensions, and ii)improved bit error performance for increased number of dimensions (a behavior we refer to as the ’large-system behavior’). As one application of the BP based approach, we demonstrate the effectiveness of the proposed BP algorithm for decoding non-orthogonal space-time block codes (STBC) from cyclic division algebras (CDA)having large dimensions. We further improve the performance of the proposed algorithm through damped belief propagation, where messages that are passed from one iteration to the next are formed as a weighted combination of messages from the current iteration and the previous iteration. Next, we extend the proposed BP approach to higher order modulation. through a novel scheme of interference cancellation. This proposed scheme exhibits large system behavior in terms of bit error performance, while being scalable to large dimensions in terms of complexity. Finally, as another application of the BP based approach, we illustrate the adoption and performance of the proposed BP algorithm for low-complexity near-optimal equalization in severely delay-spread UWBMIMO-ISI channels that are characterized by large number (tens to hundreds)of multipath components.

The studies in this dissertation mainly utilize planar antennas for ultra-wideband antenna designs not only on the investigation of antenna performance but also towards exploiting attractive features of ultra-wideband antennas for practical applications, such as WMAN access-point antennas, omnidirectional WiMAX access-point antennas, band-notched UWB (Ultra-wideband, 3.1 ~ 10.6 GHz) antennas, and so on. To begin with, the effects of the ground-plane size and the asymmetrical ground plane on ultra-wideband antennas are studied in Chapter 2. Following up, from the conclusive results, an antenna for WMAN operation in access-point applications and an omnidirectional monopole for USB wireless network card device are proposed and analyzed. Characteristics of ultra-wideband antenna radiation in relation to the antenna's width for obtaining omnidirectional radiation are addressed. In Chapter 3, several ultra-wideband access-point antennas are presented for achieving good omnidirectional radiation in the azimuthal plane across the bandwidth. Furthermore, in Chapter 4, band-notching techniques are applied to ultra-wideband antennas for avoiding the interference between the UWB and the WLAN systems.

Today, owners of small communicating device are interested in transmitting or receiving various multimedia data. By increasing the number of antennas at the transmitter and/or the receiver side of the wireless link, the diversity/Multiple-Input Multiple-Output (MIMO) techniques can increase wireless channel capacity without the need for additional power or spectrum in rich scattering environments. However, due to the limited space of small mobile devices, the correlation coefficients between MIMO antenna elements are very high and the total efficiencies of MIMO elements degrade severely. Furthermore, the human body causes high losses on electromagnetic wave. During the applications, the presence of users may result in the significant reduction of the antenna total efficiencies and highly affects the correlations of MIMO antenna systems. The aims of this thesis are to investigate and enhance the MIMO/diversity performance of multiple antenna systems in the free space and the presence of users. The background and theory of multiple antenna systems are introduced briefly first. Several figures of merits are provided and discussed to evaluate the multiple antenna systems. The decoupling techniques are investigated in the multiple antenna systems operating at the higher frequencies (above 1.7 GHz) and with high radiation efficiency. The single, dual and wide band isolation enhancements are realized through the half-wavelength decoupling slot, quarter-wavelength decoupling slot with T-shaped impedance transformer, tree-like parasitic element with multiple resonances, as well as the different polarizations and radiation patterns of multiple antennas. In the lower bands (lower than 960 MHz), due to the low radiation efficiency and strong chassis mode, the work mainly focused on how to directly reduce the correlations and enlarge the total efficiency. A new mode of mutual scattering mode is introduced. By increasing the Q factors, the radiation patterns of multiple antennas are separated automatically to reduce the correlations. With the inter-element distance larger than a certain distance, a higher Q factor also improved the total efficiency apart from the low correlation. A wideband LTE MIMO antenna with multiple resonances is proposed in mobile terminals. The high Q factors required for the low correlation and high efficiencies in mutual scattering mode is reduced with another mode of diagonal antenna-chassis mode. Hence, the bandwidth of wideband LTE MIMO antenna with multiple resonances mentioned above can be further enlarged while maintaining the good MIMO/diversity performance. The user effects are studied in different MIMO antenna types, chassis lengths, frequencies, port phases and operating modes. Utilizing these usefully information, an adaptive quad-element MAS has been proposed to reduce the user effects and the some geranial rules not limited to the designed MAS have also been given. / <p>QC 20130121</p> / EU Erasmus Mundus External Cooperation Window TANDEM

Dans les décennies à venir, la connaissance d’informations très précises concernant la position d’un objet permettra de créer des applications révolutionnaires dans les domaines sociaux, médicaux, commerciaux et militaires. La technologie Ultra-Wideband (UWB) est considérée comme un bon candidat permettant de fournir des capacités de localisation précise grâce à la mesure de l’estimation du temps d'arrivée (TOA). Dans cette thèse, des algorithmes de mesure de distance dans le cas multi-utilisateurs pour des systèmes UWB sont étudiés afin d'atteindre une bonne précision pour une faible complexité, avec de la robustesse aux interférences multi-utilisateur et dans le cas d’un grand nombre d'utilisateurs. Au cours de la dernière décennie, les signaux chaotiques ont reçu une attention significative en raison d'un certain nombre de caractéristiques intéressantes. Les signaux chaotiques sont des signaux non périodiques, déterministes ou considérés comme pseudo-aléatoires provenant de systèmes dynamiques non linéaires. Leur bonne autocorrélation et leurs faibles propriétés d’inter corrélation les rendent particulièrement résistants aux évanouissements par trajets multiples et capables d'atténuer les interférences multi-utilisateur (MUI). En raison de leur grande sensibilité aux conditions initiales, il est possible de générer un grand nombre de signaux chaotiques pour accroître la capacité globale du système. Dans cette thèse, deux nouveaux algorithmes d'estimation de TOA sont proposés dans un cadre multi-utilisateur avec une faible complexité et une bonne robustesse. Le nombre d'utilisateurs pris en charge par ces deux algorithmes est beaucoup plus grand que dans le cas des estimateurs de TOA actuels. Cependant, l'utilisation de séquences d'étalement classique et d’impulsion limite l'amélioration des performances et la capacité du système. Afin d’apporter des améliorations, des signaux chaotiques sélectionnés sont utilisés comme séquences d'étalement ou impulsion dans les algorithmes proposés. Grâce à l'utilisation de signaux chaotiques, notre algorithme est non seulement amélioré, mais permet également l’utilisation d’un plus grand nombre d'utilisateurs par comparaison avec l’algorithme utilisant des signaux classiques / In the coming decades, highly accurate position information has the potential to create revolutionary applications in the social, medical, commercial and military areas. Ultra-Wideband (UWB) technology is considered as a potential candidate for enabling accurate localization capabilities through Time-of-Arrival (TOA) based ranging techniques. Over the past decade, chaotic signals have received significant attention due to a number of attractive features. Chaotic signals are aperiodic, deterministic, and random-like signals derived from nonlinear dynamical systems whose good autocorrelation, low cross-correlation and sensitivity to the initial conditions make them particularly suitable to ranging systems. In this thesis, two new multiuser TOA estimation algorithms are proposed with low complexity and robustness to MUI, the number of users supported by which is much larger than current multiuser TOA estimators. While, the use of classic spreading sequences and ranging pulse constrain the further improvement of ranging performance and system capacity. For breaking through the limit brought by the classic signals, the selected chaotic signals are employed as the spreading sequences or ranging pulse in our proposed algorithms. With the use of chaotic signals, our proposed algorithm not only obtains the additional improvement, but also with capability to support larger number of users comparing with its counterpart using classic signals

[pt] Neste trabalho, quatro métodos projetados especificamente para a estimação de sistemas esparsos são originalmente elaborados e apresentados. São eles: Encolhimentos Sucessivos, Expansões Sucessivas, Minimização da Norma l1 e Ajuste Automático do fator de regularização do Custo LS. Os quatro métodos propostos baseiam-se na técnica de estimação de sistemas lineares e invariantes no tempo pelo critério dos mínimos quadrados, universalmente conhecida por sua denominação em inglês - Least Squares (LS) Estimation, e incorporam técnicas relacionadas a otimização convexa e à teoria de compressive sensing. Os resultados obtidos em simulações mostram que os métodos em questão têm desempenho superior que a estimação LS convencional e que o algoritmo Recursive Least Squares (RLS) com regularização convexa denominado l1-RLS, em muitos casos alcançando o desempenho ótimo apresentado pelo método de estimação LS Oráculo, no qual o suporte da resposta ao impulso em tempo discreto do sistema estimado é conhecido a priori. Além disso, os métodos propostos apresentam custo computacional menor que do algoritmo l1-RLS. / [en] In this thesis, four methods specifically designed for sparse systems estimation are originally developed and presented, which were called here: Relaxations method, Successive Expansions method, l1-norm Minimization method and Automatic Adjustment of the Regularization Factor method. The four proposed methods are based on the Least Squares (LS) Estimation method and incorporate techniques related to convex optimization and to the theory of compressive sensing. The simulation results show that the proposed methods herein present superior performance than the ordinary LS estimation method and the Recursive Least Squares (RLS) with convex regularization method (l1-RLS), in many cases achieving the same optimal performance presented by the LS Oracle method. Furthermore, the proposed methods demand lower computational cost than the l1-RLS method.

Les activités de transport de passagers et de marchandises augmentent sans cesse dans le monde et en particulier dans l'Union Européenne, entre autres au bord des péages. Afin d'améliorer la fluidité et réduire les risques d‘encombrements, une des solutions consiste à rendre les péages plus performants. L'objectif de cette thèse est d'améliorer la performance des systèmes d'identification de véhicules et de contribuer à la conception d'un système de classification des types de véhicules par ondes électromagnétiques pour application au télépéage. Ce système permet un paiement automatique sans arrêt des véhicules. La première partie de la thèse est consacrée à l'étude de deux systèmes d'identification de véhicules : RFID UHF et DSRC. Notre recherche s'est focalisée sur l'augmentation de la distance de communication ainsi que sur la réduction de la taille et du prix du système grâce à 5 nouvelles antennes à bas coûts, très directives et faciles à industrialiser. La deuxième partie est consacrée à l'étude d'un système de classification à distance des différents types de véhicules, basé sur les ondes diffusées par les véhicules. Il détecte la présence d'un véhicule et mesure la distance entre ce véhicule et le système avec une bonne précision. Ce système est basé sur la technique de radar Ultra-Large-Bande. Le signal émis est une impulsion monocyle de très courte durée. Dans cette partie, nous proposons et testons trois méthodes de classification de véhicules dans un environnement proche du milieu routier. / The activities of passenger and goods transport are constantly increasing worldwide and especially in the European Union, including the edge of tolls. To improve the fluidity and reduce the risk of congestion, one of the solutions is automatic toll payments. The objective of this thesis is to enhance the performance of vehicle identification systems and to contribute to develop a design of a classification vehicles system by using electromagnetic waves for free-flow electronic toll collection system application. This system allows an automatic payment without stopping vehicles. The first part of this thesis deals with the study of two vehicle identification systems: UHF RFID and DSRC. Five new antennas were realized with the purpose to increase the communication range as well as to reduce the size and cost of the system. They are high gain and easy to be industrialized. The second part of this thesis is devoted to the study of a classification of different types of vehicles from the scattered waves captured by the system. Three methods of vehicle classification are proposed and tested in the road environment. Such system detects the presence of vehicle and measures the distance between vehicle and itself with a good accuracy. The principle of the system is based on Ultra-Wideband radar technology in which transmitting signal with a very short duration pulse is used.

Made available in DSpace on 2014-12-17T14:55:06Z (GMT). No. of bitstreams: 1 HertzWCL_TESE.pdf: 4465162 bytes, checksum: b8574ba7e4819cb59386ad0ba99ebd86 (MD5) Previous issue date: 2012-10-11 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The frequency selective surfaces, or FSS (Frequency Selective Surfaces), are structures consisting of periodic arrays of conductive elements, called patches, which are usually very thin and they are printed on dielectric layers, or by openings perforated on very thin metallic surfaces, for applications in bands of microwave and millimeter waves. These structures are often used in aircraft, missiles, satellites, radomes, antennae reflector, high gain antennas and microwave ovens, for example. The use of these structures has as main objective filter frequency bands that can be broadcast or rejection, depending on the specificity of the required application. In turn, the modern communication systems such as GSM (Global System for Mobile Communications), RFID (Radio Frequency Identification), Bluetooth, Wi-Fi and WiMAX, whose services are highly demanded by society, have required the development of antennas having, as its main features, and low cost profile, and reduced dimensions and weight. In this context, the microstrip antenna is presented as an excellent choice for communications systems today, because (in addition to meeting the requirements mentioned intrinsically) planar structures are easy to manufacture and integration with other components in microwave circuits. Consequently, the analysis and synthesis of these devices mainly, due to the high possibility of shapes, size and frequency of its elements has been carried out by full-wave models, such as the finite element method, the method of moments and finite difference time domain. However, these methods require an accurate despite great computational effort. In this context, computational intelligence (CI) has been used successfully in the design and optimization of microwave planar structures, as an auxiliary tool and very appropriate, given the complexity of the geometry of the antennas and the FSS considered. The computational intelligence is inspired by natural phenomena such as learning, perception and decision, using techniques such as artificial neural networks, fuzzy logic, fractal geometry and evolutionary computation. This work makes a study of application of computational intelligence using meta-heuristics such as genetic algorithms and swarm intelligence optimization of antennas and frequency selective surfaces. Genetic algorithms are computational search methods based on the theory of natural selection proposed by Darwin and genetics used to solve complex problems, eg, problems where the search space grows with the size of the problem. The particle swarm optimization characteristics including the use of intelligence collectively being applied to optimization problems in many areas of research. The main objective of this work is the use of computational intelligence, the analysis and synthesis of antennas and FSS. We considered the structures of a microstrip planar monopole, ring type, and a cross-dipole FSS. We developed algorithms and optimization results obtained for optimized geometries of antennas and FSS considered. To validate results were designed, constructed and measured several prototypes. The measured results showed excellent agreement with the simulated. Moreover, the results obtained in this study were compared to those simulated using a commercial software has been also observed an excellent agreement. Specifically, the efficiency of techniques used were CI evidenced by simulated and measured, aiming at optimizing the bandwidth of an antenna for wideband operation or UWB (Ultra Wideband), using a genetic algorithm and optimizing the bandwidth, by specifying the length of the air gap between two frequency selective surfaces, using an optimization algorithm particle swarm / As superf?cies seletivas de freq??ncia, ou FSS (Frequency Selective Surfaces), s?o estruturas constitu?das por arranjos peri?dicos de elementos condutores, denominados patches, geralmente muito finos e impressos sobre camadas diel?tricas, ou de aberturas, perfuradas em superf?cies met?licas muito finas, para aplica??es nas faixas de microondas e ondas milim?tricas. Estas estruturas s?o frequentemente utilizadas em aeronaves, m?sseis, sat?lites, radomes, antenas de refletor, antenas de alto ganho e fornos de microondas, por exemplo. A utiliza??o destas estruturas tem como objetivo principal filtrar bandas de freq??ncia, que podem ser de transmiss?o ou de rejei??o, dependendo da especificidade da aplica??o desejada. Por sua vez, os sistemas de comunica??o modernos, tais como GSM (Global System for Mobile Communications), RFID (Radio Frequency Identification), Bluetooth, Wi-Fi e WiMAX, cujos servi?os s?o altamente demandados pela sociedade, t?m requerido o desenvolvimento de antenas que apresentem, como caracter?sticas principais, baixo custo e perfil, al?m de peso e dimens?es reduzidas. Neste contexto, a antena de microfita se apresenta como uma excelente op??o para os sistemas de comunica??es atuais, pois (al?m de atenderem intrinsicamente aos requisitos mencionados) s?o estruturas planares de f?cil fabrica??o e integra??o com outros componentes de circuitos de microondas. Em consequ?ncia, a an?lise e principalmente a s?ntese destes dispositivos, em face da grande possibilidade de formas, dimens?es e periodicidade de seus elementos, tem sido efetuada atrav?s de modelos de onda completa, tais como o m?todo dos elementos finitos, o m?todo dos momentos e o m?todo das diferen?as finitas no dom?nio do tempo. Entretanto, estes m?todos apesar de precisos requerem um grande esfor?o computacional. Neste contexto, a intelig?ncia computacional (IC) tem sido utilizada com sucesso nos projetos e na otimiza??o de estruturas planares de microondas, como uma ferramenta auxiliar e muito adequada, dada a complexidade das geometrias das antenas e das FSS consideradas. A intelig?ncia computacional ? inspirada em fen?menos naturais como: aprendizado, percep??o e decis?o, utilizando t?cnicas como redes neurais artificiais, l?gica fuzzy, geometria fractal e computa??o evolucion?ria. Este trabalho realiza um estudo de aplica??o de intelig?ncia computacional utilizando metaheur?sticas como algoritmos gen?ticos e intelig?ncia de enxames na otimiza??o de antenas e superf?cies seletivas de frequ?ncia. Os algoritmos gen?ticos s?o m?todos computacionais de busca baseados na teoria da sele??o natural proposta por Darwin e na gen?tica utilizados para resolver problemas complexos como, por exemplo, problemas em que o espa?o de busca cresce com as dimens?es do problema. A otimiza??o por enxame de part?culas tem como caracter?sticas a utiliza??o da intelig?ncia de forma coletiva sendo aplicada em problemas de otimiza??o em diversas ?reas de pesquisa. O objetivo principal deste trabalho consiste na utiliza??o da intelig?ncia computacional, na an?lise e s?ntese de antenas e de FSS. Foram consideradas as estruturas de um monopolo planar de microfita, do tipo anel, e de uma FSS de dipolos em cruz. Foram desenvolvidos os algoritmos de otimiza??o e obtidos resultados para as geometrias otimizadas de antenas e FSS consideradas. Para a valida??o de resultados foram projetados, constru?dos e medidos v?rios prot?tipos. Os resultados medidos apresentaram excelente concord?ncia com os simulados. Al?m disso, os resultados obtidos neste trabalho foram comparados com os simulados atrav?s de um software comercial, tendo sido observada tamb?m uma excelente concord?ncia. Especificamente, a efici?ncia das t?cnicas de IC utilizadas foram comprovadas atrav?s de resultados simulados e medidos, objetivando a otimiza??o da largura de banda de uma antena para opera??o em banda ultralarga, ou UWB (Ultra Wideband), com a utiliza??o de um algoritmo gen?tico e da otimiza??o da largura de banda, atrav?s da especifica??o do comprimento do gap de ar entre duas superf?cies seletivas de frequ?ncia, utilizando um algoritmo de otimiza??o por enxame de part?culas

Abstract The past two decades have witnessed an unprecedented proliferation of mobile devices equipped with extremely innovative wireless technologies. Short range networks, such as wireless personal area networks (WPANs), wireless sensor networks (WSNs) and wireless body area networks (WBANs) have been defined and researched to deliver high speed home connectivity, environment and health monitoring. This thesis tackles design, analysis and simulation of medium access control (MAC) protocols tailored for short range networks. These have in common the use of battery operated devices but also certain design challenges connected with MAC protocols are common upon selecting the physical layer technology. Ultra wideband (UWB) technology and 60 GHz technology (which is referred to also as millimeter wave communications) are two valid examples of the wireless revolution of the past decade. Several existing standards, such as IEEE 802.15.3, ECMA-368, IEEE 802.15.4 and its amendment IEEE 802.15.4a, are considered in this thesis for MAC analysis in conjunction with UWB technology. With regard to millimeter wave communications the characteristics of the IEEE 802.15.3c standard are taken into account. Apart for the IEEE 802.15.3c all the MAC protocols have been modeled in the network simulator Opnet. One contribution of this thesis is to produce an innovative and in-depth analysis of the management aspects (e.g. ECMA-368 distributed beaconing) stemming from the above mentioned standards by means of analytical and simulation models. This study approach allows selecting the MAC features suitable for the applications and the technologies of interest. The key performance metric used to analyze all the protocols is energy efficiency, but also throughput is investigated. Another contribution brought by this thesis consists in the innovative way of studying slotted-based MAC protocols as an integrated concept connected with the type of network, the type of application and the selected physical technologies. This thesis also shows MAC performance in conjunction with UWB when false alarm, miss-detection and receiver capture (capture is modeled by means of an existing interference model) are taken into consideration. Most of the unrealistic, though common, assumptions in MAC analysis are removed and the performance of selected medical applications is evaluated through Opnet simulations. The well known binary exponential backoff is analyzed with an innovative though simplified one-dimensional Markov chain approach in the context of directional MAC for 60 GHz communications. As shown in the remainder of this thesis, the simplification introduced does not hinder the accuracy of the results, but rather allows accounting even for a finite number of retransmissions with a simple chain extension. / Tiivistelmä Kahden viime vuosikymmenen aikana innovatiivisella langattomalla tekniikalla varustettujen viestintälaiteiden määrä on kasvanut räjähdysmäisesti. Lyhyen kantaman verkkoja kuten langattomia henkilökohtaisen alueen verkkoja (WPAN), langattomia anturiverkkoja (WSN) ja langattomia vartaloalueen verkkoja (WBAN) on määritelty ja tutkittu, jotta voitaisiin tuottaa korkeanopeuksisia kotiyhteyksiä sekä välineitä ympäristön ja terveydentilan seurantaan. Tämä väitöskirja käsittelee lyhyen kantaman viestintään suunniteltujen linkinohjauskerroksen MAC-protokollien suunnittelua, analysointia ja simulointia. Näissä kaikissa käytetään akkukäyttöisiä laitteita, mutta myös tietyt MAC-protokollien suunnittelun haasteet ovat tavallisia fyysisen kerroksen teknologiaa valittaessa. Ultra-laajakaistainen (UWB) teknologia ja 60 GHz teknologia (eli millimetriaallonpituusalueen tietoliikenne) ovat hyviä esimerkkejä kuluneen vuosikymmenen langattomasta vallankumouksesta. Tässä väitöskirjassa huomioidaan UWB teknologiaan liittyvää MAC-kerroksen analyysiä tehtäessä useat olemassa olevat standardit, kuten IEEE 802.15.3, ECMA-368, IEEE 802.15.4 ja sen lisäys IEEE 802.15.4a. Millimetriaallonpituusalueen tietoliikenteessä huomioidaan myös IEEE 802.15.3c standardin erityispiirteet. IEEE 802.15.3c:tä lukuun ottamatta kaikki MAC-protokollat on mallinnettu Opnet verkkosimulaattorilla. Tämä tutkimus tarjoaa innovatiivisen ja syväluotaavan tutkimuksen näiden standardien pohjalta ja analyyttisten ja simuloitujen mallien avulla kehitetyistä hallinnallisista lähestymistavoista (esim. ECMA-368 hajautettu majakkasignaali). Näiden avulla voidaan valita kohteena oleviin sovelluksiin ja teknologioihin parhaiten soveltuvia MAC-ominaisuuksia. Kaikkien protokollien analysointiin käytetty ensisijainen suorituskykymittari on energiatehokkuus, mutta myös datanopeuksia on tarkasteltu. Tässä tutkimuksessa esitellään myös innovatiivinen tapa tutkia MAC protokollia integroituina konsepteina suhteessa verkon ja sovellusten tyyppiin sekä fyysisen kerroksen teknologiaan. Lisäksi tämä väitöskirja esittelee MAC suorituskykyä UWB verkossa silloin, kun siinä otetaan huomioon väärät hälytykset, väärä havainnointi ja vastaanottimen signaalinkaappaus (vastaanoton mallintamiseksi käytetään olemassa olevaa interferenssimallia). MAC analyysistä poistetaan useimmat epärealistiset, vaikkakin tavalliset, olettamukset, ja verkkojen suorituskykyä tarkastellaan valittujen kriittisten parametrien monitoroinnissa Opnet-simulaatioiden avulla. Tunnettua binäärijakoinen eksponentiaalinen perääntyminen -algoritmia analysoidaan innovatiivisella, yksinkertaistetulla yksiulotteisella Markov-ketju -mallilla 60 GHz:n suunta-antenni MAC:n yhteydessä. Kuten tässä tutkimuksessa tullaan osoittamaan, esitelty yksinkertaistus ei rajoita tulosten tarkkuutta, vaan mukaan voidaan lukea jopa rajallinen määrä uudelleenlähetyksiä yksinkertaisen Markovin ketjun laajennuksen avulla.