Yes / In this paper, a compact dielectric resonator antenna (DRA) with band-notched characteristics for ultra-wideband applications is presented. A comprehensive parametric study was carried out using CST Microwave Studio Suite TM 2011 to analyze and optimize the characteristics of the proposed antenna. Three shapes for the coupling slot were investigated. Simulation results show that the proposed DRA had a −10 dB impedance bandwidth of 23% from 9.97 GHz to 12.558 GHz, and a maximum gain of 7.23 dBi. The antenna had a notched band centered at 10.57 GHz, which increased the reflection coefficient by 23.5 dB, and reduced the gain by 6.12 dB. The optimized designs were verified by experimental tests on fabricated samples.

CMOS technology is particularly attractive for commercialization of ultra wideband (UWB) radios due to its low power and low cost. In addition to CMOS implementation, UWB radios would also significantly benefit from a radio architecture that enables digital communications. In addition to the normal challenges of CMOS RFIC design, there are two major technical challenges for the implementation of CMOS digital UWB radios. The first is building RF and analog circuitry covering wide bandwidth over several GHz. The second is sampling and digitizing high frequency signals in the UWB frequency range of 3 GHz to 10 GHz, which is not feasible for existing CMOS analog-to-digital converters. In this dissertation, we investigate the two technical challenges at the circuit level and the system level. We propose a systematic approach at the circuit level for optimal transistor sizing and biasing conditions that result in optimal noise and power matching over a wide bandwidth. We also propose a general scheme for wideband matching. To verify our methods, we design two single-stage low noise amplifiers (LNAs) in TSMC 0.18µm CMOS technology. Measurement results from fabricated chips indicate that the proposed LNAs could achieve as high as 16 dB power gain and as low as 2.2 dB noise figure with only 6.4 mA current dissipation under a supply voltage of 1.2 V. At the system level, we propose a unique frequency domain receiver architecture. The receiver samples frequency components of a received signal rather than the traditional approach of sampling a received signal at discrete instances in time. The frequency domain sampling leads to a simple RF front-end architecture that directly samples an RF signal without the need to downconvert it into a baseband signal. Further, our approach significantly reduces the sampling rate to the pulse repetition rate. We investigate a simple, low-power implementation of the frequency domain sampler with 1-bit ADCs. Simulation results show that the proposed frequency-domain UWB receiver significantly outperforms a conventional analog correlator. A digital UWB receiver can be implemented efficiently in CMOS with the proposed LNA as an RF front-end, followed by the frequency domain sampler. / Ph. D.

Ultra-wideband (UWB) communication has been the subject of extensive research in recent years due to its unique capabilities and potential applications, particularly in short-range multiple access wireless communications. However, many important aspects of UWB-based communication systems have not yet been thoroughly investigated. The propagation of UWB signals in indoor environments is the single most important issue with significant impacts on the future direction, scope, and generally the extent of the success of UWB technology. The objective of this dissertation is to obtain a more thorough and comprehensive understanding of the potentials of UWB technology by characterizing the UWB communication channels. Channel characterization refers to extracting the channel parameters from measured data. The extracted parameters are used to quantify the effect of the channel on communication UWB systems using this channel as signal transmission medium. Data are measured in different ways using a variety of time-domain and frequency-domain techniques. The experimental setups used in channel characterization effort also include pulse generators and antennas as integral parts of the channel, since the pulse shape and antenna characteristics have significant impact on channel parameters. At a fundamental level, the propagation of UWB signals, as any electromagnetic wave, is governed, among other things, by the properties of materials in the propagation medium. One of the objectives of this research is to examine propagation through walls made of typical building materials and thereby acquire ultra-wideband characterization of these materials. The loss and the dielectric constant of each material are measured over a frequency range of 1 to 15 GHz. Ten commonly used building materials are chosen for this investigation. These include, dry wall, wallboard, structure wood, glass sheet, bricks, concrete blocks, reinforced concrete (as pillar), cloth office partition, wooden door, and styrofoam slab. The work on ultra-wideband characterization of building materials resulted in an additional interesting contribution. A new formulation for evaluating the complex dielectric constant of low-loss materials, which involves solving real equations and thus requiring only one-dimensional root searching techniques, was found. The results derived from the exact complex equation and from the new formulation are in excellent agreement. Following the characterization of building materials, an indoor UWB measurement campaign is undertaken. Typical indoor scenarios, including line-of-sight (LOS), non-line-of-sight (NLOS), room-to-room, within-the-room, and hallways, are considered. Results for indoor propagation measurements are presented for local power delay profiles (local-PDP) and small-scale averaged power delay profiles (SSA-PDP). Site-specific trends and general observations are discussed. The results for pathloss exponent and time dispersion parameters are presented. The analyses results indicate the immunity of UWB signals to multipath fading. The results also clearly show that UWB signals, unlike narrowband signals, do not suffer from small scale fading, unless the receiver is too close to walls. Multipath components are further studies by employing a deconvolution technique. The application of deconvolution results in resolving multipath components with waveforms different from those of the sounding pulse. Resolving more components can improve the design of the rake receiver. The final part of this research elaborates on the nature of multiple access interference and illustrates the application of multi-user detection to improve the performance of impulse radio systems. Measured dispersion parameters and their effects on the multiple access parameters are discussed. / Ph. D.

This thesis investigates distributed medium access control (MAC) protocols custom tailored to both impulse-based ultra wideband (I-UWB) radios and to large ad hoc and sensor networks. I-UWB is an attractive radio technology for large ad hoc and sensor networks due to its robustness to multipath fading effects, sub-centimeter ranging ability, and low-cost, low-power hardware. Current medium access control (MAC) protocols for I-UWB target small wireless personal area networks (WPANs) and cellular networks, but they are not suitable for large, multihop ad hoc and sensor networks. Therefore, this paper proposes a new type of MAC protocol that enables ad hoc and sensor networks to realize the benefits of I-UWB radios. First, we propose a method to overcome the challenges of quickly, reliably, and efficiently sensing medium activity in an ultra wideband network. This provides a base MAC protocol similar to carrier sense multiple access (CSMA) in narrowband systems. Next, we propose to exploit the unique signaling of I-UWB to improve performance over the base MAC protocol without the associated overhead of similar improvements in narrowband systems. I-UWB enables a distributed multichannel MAC protocol, which improves throughput. I-UWB also facilitates a busy signal MAC protocol, which reduces wasted energy from corrupt packets. Finally, because the I-UWB Physical Layer and MAC Layer affect the network and application layers, we propose a cross-layer adaptive system that optimizes performance. Physical Layer simulations show that both the base protocol and the improvements are practical for an I-UWB radio. Networks level simulations characterize the performance of the proposed MAC protocols and compare them to existing MAC protocols. / Ph. D.

Generation of high-peak power, microwave ultra-short pulses (USPs) is desirable for ultra-wideband communications and remote sensing. A variety of microwave USP generators exist today, or are described in the literature, and have benefits and limitations depending on application. A new class of pulse compressors for generating USPs using electromagnetic time reversal (TR) techniques have been developed in the last decade, and are the topic of this dissertation. This dissertation presents a compact TR microwave pulse-compression cavity that has ultra-wide bandwidth (5 GHz – 18 GHz), and employs waveguide feeds for high-peak power output over the entire band. The system uses a time-reversal-based pulse compression scheme with one-bit processing (OBTR) to achieve high compression gain. Results from full-wave simulations are presented as well as measurements showing compression gain exceeding 21.2 dB, 22% efficiency, and measured instantaneous peak output powers reaching 39.2 kW. These are all record results for this type of pulse compressor. Additionally presented is new analysis of variation in compression gain due to impulse response recording time and bandwidth variation, new experimental work on the effect of mode stirrer position on compression gain, and a novel RF switch-based technique for reducing time-sidelobes while using OBTR. Finally, a new technique is presented that uses a reverberant cavity with only one feed connected to an ultra-wideband circulator (6.5 GHz to 17 GHz) to perform TRPC. Prior to this work, TRPC has only been demonstrated in electromagnetics using two or more feeds and a reverberant cavity acting as the time-reversal mirror. This new 1-port technique is demonstrated in both simulation and measurement. The proposed system achieves up to a measured 3 dB increase in compression gain and increased efficiency. Also, a novel application of the random coupling model (RCM) to calculate compression gain is presented. The cavity eigenfrequencies are modeled after eigenvalues of random matrices satisfying the Gaussian orthogonal ensembles (GOE) condition. Cavity transfer functions are generated using Monte Carlo simulations, and used to compute the compression gains for many different cavity realizations. / Doctor of Philosophy / Generation of high-peak power, microwave ultra-short pulses (USPs) is desirable for ultra-wideband communications and remote sensing. A variety of microwave USP generators exist today, or are described in the literature, and have benefits and limitations depending on application. A new class of pulse compressors for generating USPs using electromagnetic time reversal (TR) techniques have been developed in the last decade, and are the topic of this dissertation. This dissertation presents a compact TR-based microwave pulse-compression cavity that has unique features that make it optimal for high-power operations, with results from simulations as well as measurements showing improved performance over other similar cavities published in the literature with a record demonstrated peak output power of 39.2 kW. Additionally, new analysis on the operation and optimization of this cavity for increased performance is also presented. Finally, a new technique is presented that uses a cavity with only one feed that acts as both the input and output. This 1-port technique is demonstrated in both simulation and measurement. The proposed system achieves a two-times increase in compression gain over its 2-port counterpart. In conjunction with these measurements and simulations, a novel technique for predicting the performance of these cavities using Monte Carlo simulation is also presented.

Networked wireless sensor systems have the potential to play a major role in critical applications including: environmental monitoring of chemical/biological attacks; condition-based maintenance of vehicles, ships and aircraft; real-time monitoring of civil infrastructure including roads, bridges etc.; security and surveillance for homeland defense systems; and battlefield surveillance and monitoring. Such wireless sensor networks can provide remote monitoring and control of operations of large-scale systems using low-power, low-cost, "throw-away" sensor nodes. This thesis focuses on two aspects of wireless sensor node development: (1) post-IC assembly of nanosensor devices onto prefabricated complementary-metal-oxide-semiconductor (CMOS) integrated circuits using a technique called dielectrophoretic (DEP) assembly; and (2) design of a low-power SiGe BiCMOS multi-band ultra-wideband (UWB) transmitter for wireless communications with other nodes and/or a central control unit in a wireless sensor network. For the first part of this work, a DEP assembly test chip was designed and fabricated using the five-metal core CMOS platform technology of Motorola's HiP6W low-voltage 0.18_m Si/SiGe BiCMOS process. The CMOS chip size was 2.5mm x 2.5 mm. The required AC signal for assembling nanowires is provided to the bottom electrodes defined in the Metal 4 (M4) layer of the IC process. This signal is then capacitively coupled to the top/assembly electrodes defined in the top metal (M5) layer that is also interconnected to appropriate readout circuitry. The placement and alignment of the nanowires on the top electrodes are defined by dielectrophoretic forces that act on the nanowires. For proof of concept purposes, metallic rhodium nanowires ((length = 5μm and diameter = 250 nm) were used in this thesis to demonstrate assembly onto the prefabricated CMOS chip. The rhodium nanowires were manufactured using a nanotemplated electroplating technique. In general, the DEP assembly technique can be used to manipulate a wider range of nanoscale devices (nanowire sensors, nanotubes, etc.), allowing their individual assembly onto prefabricated CMOS chips and can be extended to integrate diverse functionalized nanosensors with sensor readout, data conversion and data communication functionalities in a single-chip environment. In addition, this technique provides a highly-manufacturable platform for the development of multifunctional wireless sensor nodes based on assembled nano-sensor devices. The resistances of the assembled nanowires were measured to be on the order of 110 Ω consistent with prior prototype results. Several issues involved in achieving successful assembly of nanowires and good electrical continuity between the nanowires and metal layers of IC processes are addressed in this thesis. The importance of chemical/mechanical planarization (CMP) technique in modern IC processes and considerations for electrical isolation of readout circuit from the assembly sites are discussed. For the second part of this work, a multi-band hopping ultrawideband transmitter was designed to operate in three different frequency bands namely, 4.8 GHz, 6.4 GHz and 8.0 GHz. As a part of this effort, this thesis includes the design of a CMOS phase/frequency detector (PFD), a CMOS pseudo-random code generator and an on-chip passive loop filter, which were designed for the multi-band PLL frequency synthesizer. The CMOS PFD provided phase tracking over a range of -2π to +2π radians. The on-chip passive loop filter was designed for a 62_ phase margin, 250 μA-charge pump output current and 4 MHz-PLL loop-bandwidth. The CMOS pseudorandom code generator provided a two-bit output that helped switch the frequency bands of the UWB transmitter. With all these components, along with a BiCMOS VCO, a CMOS charge pump and a CMOS frequency divider, the simulated PLL frequency synthesizer locked within a relatively short time of 700ns in all three design frequency bands. The die area for the multi-band UWB transmitter as laid out was 1.5 mm x 1.0 mm. Future work proposed by this thesis includes sequential assembly of diverse functionalized gas/chemical nanosensor elements into arrays in order to realize highly sensitive "electronic noses". With integration of such diverse functionalized nano-scale sensors with low-power read-out and data communication system, a versatile and commercially viable low-power wireless sensor system can be realized. / Master of Science

As ubiquitous wireless communication becomes part of life, the demand on antenna miniaturization and interference reduction becomes more extreme. However, antenna size and performance are limited by radiation physics, not technology. In order to understand antenna radiation and energy storage mechanisms, classical and alternative viewpoints of radiation are discussed. Unlike the common sense of classical antenna radiation, it is shown that the entire antenna fields contribute to both radiation and energy storage with varying total energy velocity during the radiation process. These observations were obtained through investigating impedance, power, the Poynting vector, and energy velocity of a radiating antenna. Antenna transfer functions were investigated to understand the real-world challenges in antenna design and overall performance. An extended model, using both the singularity expansion method and spherical mode decomposition, is introduced to analyze the characteristics of various antenna types including resonant, frequency-independent, and ultra-wideband antennas. It is shown that the extended model is useful to understand real-world antennas. Observations from antenna radiation physics and transfer function modeling lead to both corrections and extension of the classical fundamental-limit theory on antenna size. Both field and circuit viewpoints of the corrected limit theory are presented. The corrected theory is extended for multi-mode excitation cases and also for ultra-wideband and frequency-independent antennas. Further investigation on the fundamental-limit theory provides new innovations, including a low-Q antenna design approach that reduces antenna interference issues and a generalized approach for designing an antenna close to the theoretical-size limit. Design examples applying these new approaches with simulations and measurements are presented. The extended limit theory and developed antenna design approaches will find many applications to optimize compact antenna solutions with reduced near-field interactions. / Ph. D.

Ultra-Wideband Communication is increasingly being considered as an attractive solution for high data rate short range wireless and position location applications. Knowledge of the statistical nature of the channel is necessary to design wireless systems that provide optimum performance. This thesis investigates the spatial characteristics of the channel based on measurements conducted using UWB pulses in an indoor office environment. The statistics of the received signal energy illustrate the low spatial fading of UWB signals. The distribution of the Angle of arrival (AOA) of the multipath components is obtained using a two-dimensional deconvolution algorithm called the Sensor-CLEAN algorithm. A spatial channel model that incorporates the spatial and temporal features of the channel is developed based on the AOA statistics. The performance of the Sensor-CLEAN algorithm is evaluated briefly by application to known artificial channels. UWB systems co-exist with narrowband and other wideband systems. Even though they enjoy the advantage of processing gain (the ratio of bandwidth to data rate) the low energy per pulse may cause these narrow band interferers (NBI) to severely degrade the UWB system's performance. A technique to suppress NBI using multiple antennas is presented in this thesis which exploits the spatial fading characteristics. This method exploits the vast difference in fading characteristics between UWB signals and NBI by implementing a simple selection diversity scheme. It is shown that this simple scheme can provide strong benefits in performance. / Master of Science

Recently, ultra-wideband (UWB) technology based on the transmission of short duration pulses has gained much interest for its application to wireless communications. This thesis covers a range of topics related to the analysis of indoor UWB channels for communications and to system level design issues for UWB receivers. Measurement based UWB small scale modeling and characterization efforts as well as UWB communications system analysis and simulation are presented. Relevant background material related to UWB communications and wireless channel modeling is presented. The details of the small scale channel modeling work, including statistical characterization and potential models, are discussed. A detailed analysis of the CLEAN algorithm, which was used to process all the measurement data, is also given, and some limitations of the algorithm are presented. The significance of the channel impulse response model chosen for the simulation of UWB communications systems is also evaluated. Three traditional models are found to be useful for modeling NLOS UWB channels, but not LOS channels. A new model for LOS UWB channels is presented and shown to represent LOS channels much more accurately than the traditional models. Receiver architectures for UWB systems are also discussed. The performance of correlation receivers and energy detector receivers are compared as well as Rake diversity forms of each of these types to show tradeoffs in system complexity with performance. Interference to and by UWB signals is considered. A narrowband rejection system for UWB receivers is shown to offer significant system improvement is the presence of strong interferers. / Master of Science

The use of ultra-wideband (UWB) signals holds great promise for remote monitoring of vital-signs which has applications in the medical, for first responder and in security. Previous research has shown the feasibility of a UWB-based radar system for respiratory and heartbeat rate estimation. Some simulation and real experimental results are presented to demonstrate the capability of the respiration rate detection. However, past analysis are mostly based upon the assumption of an ideal experiment environment. The accuracy of the estimation and interference factors of this technology has not been investigated. This thesis establishes an analytical framework for the FFT-based signal processing algorithms to detect periodic bio-signals from a single target. Based on both simulation and experimental data, three basic challenges are identified: (1) Small body movement during the measurement interval results in slow variations in the consecutive received waveforms which mask the signals of interest. (2) The relatively strong respiratory signal with its harmonics greatly impact the detection of heartbeat rate. (3) The non-stationary nature of bio-signals creates challenges for spectral analysis. Having identified these problems, adaptive signal processing techniques have been developed which effectively mitigate these problems. Specifically, an ellipse-fitting algorithm is adopted to track and compensate the aperiodic large-scale body motion, and a wavelet-based filter is applied for attenuating the interference caused by respiratory harmonics to accurately estimate the heartbeat frequency. Additionally, the spectrum estimation of non-stationary signals is examined using a different transform method. Results from simulation and experiments show that substantial improvement is obtained by the use of these techniques. Further, this thesis examines the possibility of multi-target detection based on the same measurement setup. Array processing techniques with subspace-based algorithms are applied to estimate multiple respiration rates from different targets. The combination of array processing and single- target detection techniques are developed to extract the heartbeat rates. The performance is examined via simulation and experimental results and the limitation of the current measurement setup is discussed. / Master of Science