This dissertation includes two research topics. This first topic focuses on fundamental studies of monolignols and lignin, including polymerization and degradation. The second part reports a polymeric material that was crosslinked but can be reprocessed. In order to understand lignin from a molecular level and promote biopolymer conversion, we investigated the dehydrogenative copolymerization and degradation of two monolignols: caffeyl (C) alcohol and p-coumaryl (H) alcohol. The copolymerization and degradation were monitored by a quartz crystal microbalance with dissipation (QCM-D). Atomic force microscopy (AFM) was applied to investigate the topologies of the copolymer and degraded films. Horseradish peroxidase (HRP) was used as the enzyme for the dehydrogenative polymerization of monolignols and chelator-mediated Fenton chemistry was used to degrade the lignin. With constant monolignol concentration, we found that as the fraction of H in the polymerization feed increased, the amount of lignin formed increased, and the films became more rigid. For the degradation process of the resultant lignins, the presence of more C-monolignol during polymerization facilitated greater degradation. This work demonstrated the chemical factors that influenced the physical properties of lignin and lignin degradation, which could impact biofuel production. We further investigated the surface-initiated dehydrogenative polymerization of a new monolignol 5-hydroxyconiferyl (5H) alcohol using a QCM-D. HRP was immobilized on gold sensors. Various experimental conditions were studied. The dehydrogenative polymerization of 5H-monolignol was influenced by the concentration of monolignols and temperature, but was not affected by the hydrogen peroxide concentration, which was different from other monolignols. We also compared the polymerization kinetics of 5H-monolignol and the topology of the resulting lignin thin films with other monolignols. Furthermore, we utilized enzymatic and chemical degradation methods to treat the 5H-lignin. The 5H-lignin film was degraded thoroughly via a chelator-mediated Fenton reaction. This study provided a comprehensive understanding of 5H-monolignol polymerization and degradation and could be used as a reference for the exploration of the applications of the 5H-monolignol. In this dissertation, a separate study involved a vitrimer. It was a crosslinked polymer, but could be reprocessed and reshaped. The new vitrimer was based on poly (methyl methacrylate-co-hydroxymethyl methacrylate). Aromatic disulfides that underwent a dynamic exchange reaction were incorporated as crosslinkers. The structure of the material was identified by proton nuclear magnetic resonance spectroscopy (1H NMR) and Fourier transform infrared spectroscopy (FTIR). Thermal properties and mechanical properties were studied through thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and Instron tests. Furthermore, the chemical resistance was explored. Notably, that new material exhibited comparable mechanical performance for three cycles when reprocessed via a hot press to reprocess. / Doctor of Philosophy / Lignin is a complex phenylpropanoid polymer and is one of the most abundant biopolymers in nature. Conversion of lignin into biofuels or other fine chemicals has drawn significant attention in recent years. Understanding molecular details of lignin formation and degradation is of fundamental importance for the biorefinery. Although a number of studies have improved our knowledge about lignin, many important aspects remain unknown. Lignin arises from dehydrogenative polymerization of three types of monolignols, named p-coumaryl (H), coniferyl (G), and sinapyl (S) alcohols. Recently, a new monolignol, caffeyl (C) alcohol, has been found. In this work, the surface-initiated copolymerization of C-monolignol and H-monolignol was conducted through an in vitro synthesis. Furthermore, chelator-mediated Fenton reactions were applied to degrade the resulting lignin. The effect of C-lignin incorporation on degradation was studied. It was found that, when more C-lignin was incorporated, the percentage of degradation was larger. These findings are likely to guide the conversion of lignocellulosic biomass into value-added products. A new monolignol, 5-hydroxyconiferyl (5H) alcohol, was investigated in this dissertation. The surface-initiated dehydrogenative polymerization of 5H was conducted under various experimental conditions, including different temperature, monomer concentration, and hydrogen peroxide concentration. Furthermore, degradation by enzymatic and non-enzymatic methods were studied. It was found that the 5H-lignin was recalcitrant to enzyme, but can be degraded by a non-enzymatic procedure. The synthesis and degradation were monitored by a quartz crystal microbalance with dissipation (QCM-D), which is a label-free method and can provide real-time data. Thermosets are the materials that are chosen for many applications due to their structural stability and mechanical properties. However, due to their permanent crosslinkages, they cannot be reprocessed or recycled. In this dissertation, a new crosslinked polymer material called a vitrimer was reported. The material was developed based upon poly (methyl methacrylate) (PMMA) and aromatic disulfide linkages, which are exchangeable chemical bonds. The exchange reaction occurs very quickly at elevated temperature. As a result, the material can be easily reprocessed and also exhibited chemical stability and mechanical properties similar to conventional thermosets.

En Science des colloïdes, il est fondamental de contrôler les interactions entre les particules et leur environnement pour obtenir les propriétés souhaitées. Dans ce travail de thèse, pour former des systèmes innovants, nous avons utilisé la chimie covalente réversible à l'interface particule/polymère dans deux domaines différents : les composites vitrimères et la nanocatalyse. Dans les composites, les liens réversibles permettent d'améliorer les propriétés mécaniques tout en limitant l'impact des charges sur les propriétés vitrimères des matériaux. Deux matrices vitrimères reposant sur des réactions d'échange de nature différente, la transestérification et la transimination, ont été étudiées. L'avantage du lien imine est d'être également dissociable dans certaines conditions douces, ce qui facilite le recyclage des matériaux. La réversibilité du lien imine peut aussi être exploitée pour contrôler la dispersion/agrégation de particules en solvant. Lorsqu'elles sont liées, les chaines polymères se déploient en bon solvant et confèrent aux particules une stabilisation stérique, stabilisation qui disparait lorsqu'elles sont détachées : les particules s'agrègent et peuvent être récupérées facilement. Ce concept a été développé sur un système catalytique composé de nanoparticules de palladium supportées sur des particules de silice. Les chaines greffées améliorent non seulement la dispersion des nanocatalyseurs et les taux de conversion du système catalytique, mais aussi stabilisent les nanoparticules de palladium à la surface de la silice, limitant leur lessivage et leur agrégation. L'efficacité catalytique du système est ainsi conservée sur plusieurs cycles. / The control of the interactions between particles and their environment is essential when dealing with colloids in order to reach desired properties. In this study, reversible covalent bonds were used as interfacial interactions in two systems: vitrimer composite materials and nanocatalysis in solution. The aim of this work was to develop materials which present original properties thanks to interfacial dynamic bonds. In composites, the introduction of dynamic covalent bonds between a vitrimer matrix and the fillers enables to improve mechanical properties while preserving vitrimer properties. Two vitrimer matrices based on two different exchange reactions, transesterification or transimination, have been studied. Imine bonds are reversible bonds that can dissociate in presence of water. We demonstrate that polyimine vitrimers can be reshaped and recycled under mild conditions. The reversibility of the imine bond can also be used to control the stability of a colloidal dispersion. Indeed, grafting of polymers on particles surface through reversible covalent bonds give them steric stabilization in good solvent of the chains. Dissocation of these bonds triggers detachment of the polymer chains and induces particle aggregation. This concept was applied to a catalytic system composed of palladium nanoparticles adsorbed onto silica particles. Polymer chains not only improve the dispersion of the whole catalytic system but also limit the leaching and aggregation of the palladium nanoparticles. As a consequence, the catalytic efficiency of the particles can be preserved over several cycles.

No description available.

Överkonsumtionen av engångsartiklar i fossilbaserad plast är ett av dagens stora miljöproblem. Således finns en efterfrågan på strategier för framställning av biobaserade plaster i allmänhet och härdplaster i synnerhet. Tidigare forskning har visat att vanillin-baserade resin, genom UV-härdning och dynamisk iminkemi, kan användas i framställningen av härdplaster som är termiskt bearbetningsbara, kemiskt återvinningsbara och självläkande. Följaktligen är Digital Light Processing (DLP) 3D-utskrivning en möjlig och flexibel friformframställningsmetod med stor noggrannhet för sådana härdplaster.  Mot denna bakgrund framställdes, i detta projekt, tre olika UV-härdbara, biobaserade monomerer, i form av vitrimerresin, genom en tvåstegsreaktion: metakrylering av vanillin följt av iminbildning med tre olika aminer (etylendiamin, EDA; 2,2′-etylendioxi bisetylamin, EDEA och trimetylolpropan trispolypropylenglykol aminterminerad eter, T-403). De tre olika monomererna analyserades för att identifiera den mest lämpade för friformframställning av härdplast med DLP 3D-printning. Monomeren framställd med EDA kunde inte UV-härdas till en härdplast. De två andra monomererna, å andra sidan, härdades framgångsrikt till härdplaster med god termisk stabilitet (upp till ungefär 300 °C) samtidigt som de var termiskt bearbetningsbara. Vidare visade dessa härdplaster lovande resultat vad gäller självläkning och kemisk återvinningsbarhet. Härdningen av monomeren syntetiserad med EDEA krävde minst tidsåtgång. Utöver detta visade denna härdplast god stabilitet i ett flertal vanliga lösningsmedel samtidigt som den, till följd av dess dynamiska iminbindningar, kemiskt kunde återvinnas i hexylamin. Slutligen visades det hur detta resin framgångsrikt kunde användas i DLP 3D-utskrivning av härdplast. / One of the main causes of the petrochemical depletion is the overconsumption of single-use plastic products. New strategies based on the production of plastics (in particular thermosets) starting from bio-based resources are, therefore, demanded. Previous research has shown how vanillin-based vitrimer resins can be photocured into thermally reprocessable, chemically recyclable and self-healable imine thermosets; and the potential of the light-assisted 3D-printing techniques for the photocuring of resins with great accuracy and flexibility.  In this study, three different photocurable biobased vitrimer resins were synthesized through a two-step procedure involving the methacrylation of vanillin and the Schiff-base reaction with two different diamines (ethylenediamine, EDA; 2,2′-(Ethylenedioxy) bis(ethylamine), EDEA) and a triamine (trimethylolpropane tris[poly(propylene glycol), amine terminated] ether, T-403). The resins were analyzed in order to find the most suitable one for DLP 3D-printing. The resin with EDA, as diamine, could not be successfully UV-cured into a thermoset. The other two thermosets showed good thermal stability, up to about 300 °C, while still being thermally reprocessable. In addition, the thermosets were promising in terms of self-healability and chemical recyclability. The thermoset obtained from the Schiff-base resin synthesized with the diamine EDEA provided the shortest curing time. This resin also displayed good solvent resistance against common solvents and potential chemical recyclability in hexylamine through an imine exchange reaction. As a final step, the possibility to obtain tridimensional thermosets by curing this resin with a DLP 3D-printing was successfully demonstrated.