The aim of this thesis was to compare the activity and quality of work of the combine harvester New Holland CR 9080 and John Deere 9880 STS at harvest of cereals and oilseed rape and their simple economic evaluation. The thesis was focused on comparing losses and influence of moisture of harvested crops on the size of the losses, on the quality of crushing and the spreading of plant residues. Then the inf luence of moisture of harvested crops on the quality of crushing and the spreading of plant residues, analysis of performance and consumption of diesel were compared.

In this study, I attempted to evaluate the impact of two forest disturbances on the soil temperature and humidity in spruce forest. The spruce forests were attacked by bark beetle in the Březník area 17 years ago. Two types of management were applied after the bark beetle attack. The first approach was clear cutting and removing dead trees. The second approach was non-interventional and this zone was left to natural succession. This study compares differences in daily temperature amplitude and volumetric soil humidity between both types of management. I tried to evaluate whether the soil temperature and humidity conditions are explained more by influence of the management or by vegetation cover. Results showed significant difference in daily temperature amplitudes. Temperature amplitudes are about 49 % higher in clear cut areas than in areas with natural succession. Differences are insignificant in soil humidity conditions. The influence of the vegetation on soil temperature and humidity is insignificant. I, too, compared soil temperature and humidity from Březník areas (17 years after disturbance) and Prameny Vltavy areas where the spruce forest decayed recently.

High level of fertility and milk efficiency be ranked among major premise profitability of the company. If are not i extenso independent all necessaries of life dairycows, it is impossible expect favourableness. Human factor have in locking needs dairycows most important and fungible role, above all in the area corresponding sustenance and correct rearing technique and attendance fiduciary animals. On fertility and milk efficiency affect all row of other factors, from which ours imposition was evaluate seasonal establishment temperature influence and relative humidity. Average milk yield in herd Holstein cows attained 6 254 kg milks behind standardized lactation 305 days. Avarage deily vessel descending reduction on standardized lactation do 20,5 litre. Highest values reached average daily milk yild in spring 22,09 litres milk during lactation. Big throughs was recorded in summer, average daily vessel doed mere 16,96 litres milk during lactation. By the help of ANOVA test was ascertained statistically significant difference on significance level P 0,05 among spring and summer, among spring and winter, among summer and autumn and among summer and winter. Effected regression analysis confirmed fall average daily milk yield depending on raising temperatures inside stabling. Maximum cows at average daily efficiency about 20 - 23 litres milk here of achievement reached at 10 - 12 °C. Optimum thermal balk strode low-water mark of 28 x plus upper boundary 247 x. Temperature above 20 °C was overstepped 104 x. Optimum D shell relative humidity crossed ceiling 211 x. Average meantime in heard attained 419 days, SP 127 days and insemination interval 78 days, near over most 50 % cows was level fertility evaluation like bad. According to results ultrasonografik investigation gravided every 3. - 4. cow, which is wanting. In case executant defects was highest percent occurrence recorded near sweeping and ovarian cysts. Influence of season, let us say temperatures on fertility indices plus defect incidence wasn´t evidenced. Bad level fertility had in the framework year continual course.

No description available.

The theme of my thesis is focused on assessing the impact of changes in the microclimate of the stable welfare of dairy cows. Measurement was done in selected company called VOD Hrádek in it´s stable VKK Tedražice by measuring the basic external features and microclimate and it all was resulting in assessment of their impact on welfare of dairy cows.

The aim of this work was monitored by video recordings made in the ZD Krásná Hora nad Vltavou, 6 different types of outdoor hutches and individual one on the basis of different behavior of calves to evaluate the suitability of different types either for breeding dairy calves in the period. Investigations were carried out in winter and summer, was used in recording AVI Windows Media Player with a length of 1-minute intervals. Heifers of Czech Spotted cattle were monitored. Length of stay of individual calves in outdoor hutches was from 83-87 days. The purpose of monitoring was to evaluate the length of stay of calves within each individual outdoor hutches and length of stay outside. In each hut were installed sensors, reported the values of internal temperature and relative humidity at intervals of 15 minutes. Given that microclimate should be in different climatic conditions to create an optimal environment for the calves, the criteria have been satisfied welfare length of stay inside the shed. The average outdoor temperature during the reporting period of the winter fell to -2.54° C. In this period, the individual VIB measured average indoor temperature of -0.04 ° C to -1.43 ° C. During the follow up period was recorded in summer average daily temperature of 19.79 ° C. Summer temperatures average in each of the VIB was 21.14 ° C - 22.27 ° C. These data were no statistically significant temperature differences (P ? 0.05) between the VIB in winter and in summer. The average relative humidity in the microclimate in the winter of VIB reached values ranging from 79.57% to 86.76% in summer from 59.59% to 63.55%. In the winter when evaluating indicators of microclimatic relative humidity between VIB was a statistically significant difference P?0.05 (1:2, 2:3, 2:4, 2:5, 2:6). In winter, the length of stay within the VIB calves ranged from 73.96% - 88.96% of the reference time. Differences between the lengths of stay within the VIB calves were statistically significant (P?0.05 to P?0.001). Over the summer period, length of residence either within the calves ranged from 65.68% - 80.85% of the reference time. Differences between the lengths of stay during the summer period were significant (P?0.05 to P?0.001). Total for the period was the top-rated wooden shed ZD Krasna Hora nad Vltavou.

Presented master’s thesis is focused on the experimental research of influence of climate conditions on wheel-rail adhesion, where climate conditions are meant two parameters: ambient air temperature and air humidity. These parameters always affect wheel-raid contact and their values change significantly during the year. For presented experimental research was used tribometer Mini Traction Machine (MTM) in configuration „ball on disc“. For determination of influence climate conditions was first found out the influence of air humidity on adhesion at certain temperatures, which varied between (1 to 50) °C. These experiments were performed for two types of discs, where one disc was exposed to leaf extract contamination. After that was assembled influence of both parameters (air humidity and ambient air temperature) on adhesion in the form of a 3D map, where were distinctioned states, when condensation has occured and when didn‘t. Obtained results in this thesis will be used for optimalization of rail vehicle control systems.

This diploma thesis is focused on the assessment of the influence of moisture on the thermal properties of the gloves. The first part of the thesis deals with the research of topics related to the given issue as well as with the derivation of the computational relations needed for evaluation of experimental measurements. The main focus of the work lies on defining the hypotheses and experiments that are used to verify the influence of moisture on the thermal resistance of gloves. As for the experimental part, it describes the individual methods of moistening the gloves from which the moistening through the air humidity and the moistening by the immersion were analysed. To verify the suitability of selected moistening methods, the tested glove samples were measured on the thermal manikin both in a dry and a moistened state under the conditions defined by ČSN EN 511 and ČSN EN ISO 15831 standards. Individual states were repeatedly measured and afterwards the progresses of thermal resistance depending on time were graphically displayed. The thesis also includes analysis of measurement uncertainties as well as evaluation of measurement repeatability. From the obtained results, both the defined hypotheses and theoretical assumptions about the decrease of the thermal resistance of a textile material due to the influence of moisture were confirmed in the conclusion of the diploma thesis.

This thesis deals with the continual measurement of the hydrated lime moisture content on the principle of spectral measurements. The theoretical part describes the basic principles of the infrared spectroscopy, Fourier transformation and near infrared spectroscopy, which are used in the process of the spectroscopy measurement of fine particulates moisture content. The practical part of the work describes experiments and the evaluation of moisture hydrated lime measuring results, using gravimetric method and NIR spectroscopy in both the laboratory conditions and the conditions of operation production of hydrated lime as well. The part of the work monitors the spectroscopy measurement moisture values as the dependence on the optical quality of hydrate limes and the process conditions of the measurements.

The achievement of this thesis is to design functional equipment which is able to measure the basic meteorological variables as air temperature, humidity and barometric pressure. In order to measure relative humidity completed with temperature, an intelligent sensor manufactured by Intersema Inc., MS5534B, was chosen. Relative humidity is measured by a capacitance sensor Humirel HS1101LF. The measured data are stored in anon-volatile memory. Data can be downloaded to a computer file via serial port or they can be online displayed on the computer screen via the wireless Bluetooth connection. Because the equipment is supposed to be used for the external measurement without the connection to electricity, low power consumption was considered as a most important parameter as well as good weather protection.