This thesis treats concept of autonomous temperature, relative humidity and pressure USB datalogger. Also there is explained datalogger function, hardware design with respect on device consumption and design of chassis. Furthermore, there is described communication protocol for control and reading out data by the PC. Furthermore, there are described firmware drivers for some used components and modules for USB communication, RTC and data compression. Lastly there is described software which is used for datalogger configuration and data read out.

The purpose of this project is to build a wireless sensor network for measuring temperature and relative humidity in hop drying facility. This is a monitoring device, consists of several sensor units and one control and display unit. Display unit coordinates a whole network and can display data on LCD or download collected data to PC. Sensor unit measures a relative humidity, temperature, battery voltage and transmits data to display unit. Units contain a transceiver which operates in ISM band 868 MHz. Circuits are driven by 8-bits microcontroller Freescale.

This master´s thesis deals with the design of measuring station used for the temperature and humidity measurement. There is a theoretical basical description of sensores for temperature and humidity measurement in the first part. Furthermore I deal with a theoretical design of measuring system, especially with types of materials and possibilities of communication between these parts. The main part of thesis is about communication on buses I2C,UART, SPI, RS485. There is a description of function procedure of particular integrated circuit, moduluses which are used in task in the next part of thesis.In the practical part I was engaged in a functional design of autonomous system for the temperature and ralative humidity measurement. Data could be presented by the computer after connection with the station. There is a description of testing the particular circuits and the full description of function particular blocks of system in the task. I have used the program called Eagle for schemes and printed wirings designing. The copy is placed on CD ready for next using. In the last part of thesis is a brief description of program algorithm "Meteostanice", which I have created for data presentation. There is an illustration of measuring results in these last part. The task is completely ready for the realization of autonomous system of weather station with its own memory.

First part of this work is focused on the description exist methods for measuring refraction index of air. Second part deal with concrete problem realization measurement unit for monitoring of refraction index of air. Refraction index of air is measured indirect method which is based on a modified Edlen formula.

The aim of my thesis is to understand the manufactured thermostats and design own thermostat to allow the most basic possibilities classical thermostats plus setup and management via web interface. It is a realization of a small web server that works closely with hardware peripherals. In addition, the web interface is still possible to manage a Web server of TFT LCD screen or applications for smart phone with Android. In addition, the thermostat allows the temperature reading from the BLE modules. All temperatures are continuously stored in a database and graphically processed.

Hydraulic characteristics are the most important properties of soil, i.e. retention curve of soil moisture and hydraulic conductivity. Hydraulic conductivity of soil characterizes the ability of the soil to conduct water. Retention curve expresses the relationship between moisture and moisture potential of soil. The running of retention curve is influenced by many factors, eg. grain size and mineralogical composition, content of humus, reduce bulk density and structure of soil. Measurement of retention curves takes a lot of time and money in laboratory conditions therefore pedotransfer functions seem to be an alternative solution. The thesis aims to estimate moisture retention curves of soil in a selected area of interest in South Moravia using program Rosetta (Schaap, 2003). Data of granularity (% content of clay, sand and dust), bulk density of soil and hydrolimits field water capacity and wilting point were used as predictors in individual models of program Rosetta. Data of grain were matched by FAO / USDA system. Retention curves of soil moisture were measured on a sand tank and overpressure devices. The measured retention curves were parameterized by RETC program. Estimated retention curves were graphically compared with measured to determine the quality of the estimate. The accuracy of the estimate was assessed by correlation coefficient R of determination coefficient R2 and standard error SMRE. Usability own derivatives pedotransfer functions is hard to say due to the size of the input data file. I would recommend further verification of data at the other localities in south Moravia.

Diploma thesis deals with design of measurement and control system of an air-ground heat exchanger, which is placed in area of FME BUT in Brno. System is built in development environment LabVIEW and it is using modules CompactDAQ from National Instrument. Developed system managed trial operation, during which was designed additional changes of measurement equipment for determine another magnitudes, which help us with future evaluation of benefit of air-ground heating exchanger. It was designed some operational modes, which solve different ways of control air-ground heat exchanger.

The work deals with the verification of functionality of moisture content sensors MCT460-WP from the company Process sensors to measure fuel and products from biomass. The sensor is located on one of the Vyncke company boilers. In the first part of thesis are introduced basic issues of biomass. Thesis also generally describes the control and dynamics behaviour of biomass boilers and the effect of input parameters on the output parameters. The last part deals with comparing and analysing measured values with the calculated values and effects of moisture content changes on the output parameters of the boiler. As the last issue is loaded conceptual design based on on-line moisture sensing and inclusion of auxiliary fuel control into the existing system in order to stabilize the processes in the combustion chamber and output parameters. This should result in lower financial demands during boiler operation.

The diploma thesis deals with microclimate of a pool hall. This is divided into three parts. The first part describes the theoretical aspects of the environment in swimming pools in general. The second part of the diploma thesis deals with the calculation of the course of specific moisture concentration during the day in the pool hall. Different humidity concentration curves are assessed based on different electable input parameters. Subsequently, suitable setting options are evaluated in order to achieve acceptable environment in the hall in terms of humidity and optimal operating costs. The last part relates to the experimental part. This examines the measurement of evaporation under different boundary conditions and the subsequent comparison with some calculation methods for the calculation of evaporation.

The thesis deals with preparation of graphene nanostructures and their applications in the measurement of transport properties of graphene. The contacts for measurement of resistance are fabricated by electron beam lithography on graphene exfoliated flakes, CVD graphene layers and grains. Graphene is also shaped using the same method. Resistivity of the layer, concentration and mobility of charge carriers are determined by different approaches. Hysteresis appearing in dependence of resistivity on the gate voltage is discussed as well. A significant part of the work is dedicated to monitoring the response of graphene resistance to relative humidity changes and potential use of graphene as a sensor of relative humidity.