This project deals with design and implementation of control system, which is used for regulation climate conditions in special grow box. Measured values are displayed on graphic LCD, sent to application in PC or displayed on web server. The project solves software and hardware implementation of measurement system.

This thesis deals with the temperature-moisture assessment of members in truss with above-rafter thermal insulation. Within this system it focuses on the details of creating a roof overhang because that is where the timber elements are under the greatest amount of moisture stress. Different variations of this detail are presented including the extent to which thermo-technical requirements and requirements surrounding the built-in timber elements are satisfied. Theoretical calculations are then compared with measurements which were performed on a real building. This task of measurement involved developing a new measuring device. The development of this device is also described in this paper.

The theoretical part of the thesis is devoted to the issue thermal insulation plasters which can be applied in the remediation of buildings. The practical part deals with optimizing the composition of thermal insulation plaster-based lightweight aggregate of the foam glass and with possible substitution of cement for other binders with latent hydraulic properties. The resultant plaster should meet the best ratio of mechanical and thermal insulating properties.

Tato diplomová práce se zabývá netradičními druhy biomasy využitelnými v České republice a Španělsku a jejich srovnáním. V prvních kapitolách jsou popsány netradiční druhy biomasy, mezinárodní projekty, smlouvy a legislativa. V následujích kapitolách je rozbor netradičních druhů biomasy zejména vznikajících z potravinářského průmyslu každé země s detailním rozborem a srovnáním zbytků z průmyslového zpracování slunečnice a oliv. V závěru je uděláno celkové srovnání těchto druhů biomasy České republiky a Španělska z aspektů výkupních cen, výhřevností, vlhkosti a množství popelovin.

Dissertation focuses on the verification of construction family houses made of concrete shell block with internal thermal insulation system. The construction technology is transferred to the Czech Republic from France. The work focuses on building envelope. The suitability of implementation is assessed on the basis of verification selected thermal technical requirements placed on building envelope. Requirements are specified by legislation in force in the ČR. The verification was performed by using software simulations and measurements on realized buildings. Critical areas of construction technology were identified on the basis software simulations and measurements on site. It was suggested solution, in which critical areas comply the thermal technical requirements. The building envelope was checked also using the thermography imaging on site. Continuous measurement of interior temperature was used to evaluate thermal comfort in the room. In the completed buildings was tested airtightness of the building envelope, which revealed other critical areas of the building envelope. Critical areas are necessary to solve with sufficient care. The economic cost of implementing each variants of exterior walls made of concrete shell block with internal thermal insulation were compared with the economic costs of implementing external walls made of burnt clay hollow blocks and made of burnt clay hollow blocks with external thermal insulation system ETICS. Subsequently, the economic return was calculated for individual variants of external walls made of concrete shell blocks with internal thermal insulation. From the environmental viewpoint was made comparison of production greenhouse gas CO2 and SO2 (cause acid rains) during the life cycle of the individual variations of exterior walls made of concrete shell blocks with system of internal thermal insulation, exterior walls made of burnt clay hollow blocks and burnt clay hollow blocks with external thermal insulation syst

The subject of this final thesis is prepared detailed project documentation for the reconstruction of apartment building on Karáskovo Square in Brno - Židenice. The existing building is rectangular and is a part of a apartment terraced buildings. Residential building has a basement and three floors and an attic. The main entrance is oriented to the southwest. Foundation structures are concrete, vertical support system is a brick wall, roof structure is wooden roof standing stool with pleated ceramic tiles.

The possibility of using high-frequency electromagnetic radiation in the construction sector is a common knowledge. Various experiments have been carried out to dry construction materials, or even to destroy biotic pests. However, the majority of these experiments have been executed in laboratory conditions. It means they have been carried out under exact limiting conditions, often very far off those conditions in real building practice. Therefore, this dissertation aims at exploring the possibility of utilizing microwave technology in drying and heating of construction materials, in disposing of biotic pests and sterilizing building materials under real conditions in building practice. The thesis will explain that microwaves are a term given to a part of electromagnetic radiation. Electromagnetic radiation is based on the principle that the radiated energy is absorbed by water molecules present in moist building material. In the mass of the irradiated material, the radiated energy is transformed into thermal energy, where a so-called “motion” of water molecules occurs with the energy then being transformed into kinetic energy. The microwave technology itself offers a very wide range of use, which can be easily achieved, thus making the technology available to use in the future. Part of the experiments and the necessary measurements, too, has been carried out on selected types of building materials in the premises of the Faculty of Civil Engineering of Brno University of Technology. They have been executed under conditions which most closely correspond to the conditions in real buildings. Part of the experiments and the necessary measurements were carried out on particular constructions, by the so-called in situ method. As stated in the conclusion of the dissertation, laboratory measurements and the in situ measurements differ considerably in some cases.

The purpose of this master’s thesis is foremost to provide a simple guide how to build elements of optical metropolitan area network. The basic model consists to sequence of construction, network topology, passive and active parts. The collection contains examples of alternative technology such as Wireless LAN with different frequency. The optical network construction based on optical cable, fibres, splices, trays, adapters, connectors and active parts for example a lot of media convertor models. After that there are demonstrating type of wavelength division multiplexer used in metropolitan area network – passive planar PCL splitter. One of the passive planar splitter are used to increase optical fibre channel. At the end of the collection a simplified examples of used measurements – optical time domain reflectometry and optical fibre transmission. Contains standard protocols or reflectogram. The conclusion of this thesis summarizes costs of FTTb (Fibre To The Building) model of optical metropolitan area network in Czech republic and future contribution for society.