In vehicles one of the most important components which affect comfort of the driver and the purchasing decision is the driver&rsquo / s seat. In order to improve design of a driver seat in a leader company of automotive sector, a comprehensive analysis of customer expectations from the driver seat is performed with a cross functional team formed by representatives of design, marketing, production, quality and services departments. In this study, collection of customer voice data and development of an exceptional &ldquo / customer satisfaction estimation model&rdquo / using these data are presented. Data are modeled by the help of Logistic Regression. This model is able to estimate how much a given customer is likely to be satisfied with the driver seat at a certain confidence level. It is also explained how this model can be used to identify design improvement opportunities that help increase the probability that a customer likes the driver seat. The modeling and analysis approach used for the particular case is applicable in general to many other cases of product improvement or development.

The final thesis is focused on a process management in praxes. The theoretical part of thesis concludes different techniques of mapping and analysing of a process. The practical part is focused on a practical analyse and mapping of the certain process in international financial institution. On the base of the process analyse are suggested changes to optimize the process.

打造一個好的產品是所有早期新創公司的核心，然而如何將產品從構想到販售並取顧客喜愛，則是一個需要理論與實務結合、不斷實驗的過程。在本論文中，作者將過去三年實際帶領產品-Voltset從出生到成長的經驗紀錄下來並與理論相呼應，探討一個新產品如何透過不斷循環的迭代過程 (iteration process)增加其新產品完整度 (product readiness) 。這三年當中，作者歸納了 Voltset從初期抽象構想的形成，獲得第一位付費的客戶，到後期在全球最大的群眾募資平台上進行全球市場驗證的過程。本論文主要會針對兩大部分做深度討論: 第一部分著重於探討如何在各種實際市場驗證測試中增加產品就緒度，並點出在目前現有理論框架，如: 精實創業 (the Lean startup) 下可能與實際執行面不同之處。根據本產品的經驗，新產品第一次的迭代過程循環應該經由以下幾個步驟：產品目標市場願景、產品本身定義、最小可行性產品構築、意見領袖背書、市場驗證、市場測試與學習。第二部分則是討論當在定義一個新產品的功能與特徵時，如何正確地選擇性聽取以及以什麼方式來聽取目標客戶的需求。根據打造 Voltset產品的經驗，作者發現當潛在客戶聲音太廣泛時，應只聽取”已付費”客戶的意見，因為該族群的產生是藉由深入了解產品價值，並經歷認同與付費過程而形成，因此會在產品的功能與特徵上的需求較聚焦。 本論文藉由親身實務經驗與理論的對話提供深度的產品迭代過程探討，作者期許這樣的研究能對於縮小理論與實務的鴻溝做出貢獻。 / Product building is a core activity for any early-stage startup. However, there are still many gaps between literature to real world practice for successfully developing a product that is accepted by the market. In this thesis, the building experience of Voltset -- a one of the kind hardware and software integrated multimeter, is studied for its journey of product iteration process to increase product readiness. The cofounder of the startup as well as the author of this thesis, has reflected his firsthand experience with literature such as the Commercializing New Technologies and the Lean Startup to seek steps necessary to move the project from shaping an abstract concept, acquiring the first paying customer, and then campaigning a successful crowd funding project. The thesis focuses on answering two questions: First, what are the steps required to enhance product readiness through validation testing from the first business idea to receiving its first group of paying customers. Based on the experience of Voltset and the Lean startup framework, it suggests the first product iteration process should loop through the following stages: Product market vision, product definition, minimum viable product building, key opinion leader endorsement, validation sell, measure, and learn. Second, when a product specification needs to be pinpointed, who and how to listen to the voice of targeted customers (VOC) is the state-of-art question for early-stage startups. Within the scope of this experience, it indicates to focus only on paying customers since they understand the potential value of the new product and have similar needs compare to the wide range of feature request from the rest of potential buyers. This thesis provides the insights of product iteration from first-hand experience, enriching the knowledge gap between real product building and theoretic framework point of view.

Design Thinking (designtänkande) är ett kundfokuserat förhållningssätt som används för att stödja innovation. Sedan starten har designtänkandet utvecklats från ett rättframt sätt att lösa tekniska designproblem till en komplex paraplykonstruktion för innovation och förhållningssättet har genom åren blivit ett allmänt accepterat och målinriktat tillvägagångssätt för effektiv produktutveckling. Flera av de praktiska användningsfallen som finns tillgängliga om designtänkande i forskning hänvisar till ett enskilt fall för att lösa specifika problem eller dess tillämpning i business-tocustomer företag. Syftet med detta examensarbete var att kritiskt undersöka hur designtänkande kunde implementeras i ett business-to-business (B2B)-företag med välutvecklade produktutvecklingsprocesser för att balansera kundfokus med produkt strategi. För att förstå effekterna av designtänkande i sådana företag undersöktes hinder som förhindrar designtänkandets implementering och möjligheterna med att införa det med hjälp av en fallstudie på Mycronic AB-kontoret i Täby, Sverige. Materialet i studien samlades in genom interna och externa kvalitativa intervjuer. Resultaten från intervjuerna användes för att föreslå ett ramverk och ett pilotprogram för att stödja Mycronic att införa principer för designtänkande i sin befintliga PDP. Målet med ramverket är att skapa förutsättningar för ett B2B-företag att anpassa sin produktutvecklingsprocess till designprinciper för att bättre förstå slutkundernas explicita och outtalade behov och behoven hos interna intressenter samt för att öka förmågan att identifiera rätt initiativ i ett tidigt skede av ett projekt. / Design Thinking (DT) is a customer centric approach for managing innovation. Since its inception, design thinking has evolved from a straight forward approach to solve engineering design problems into a complex umbrella construct for innovation and has over the years been widely accepted as a goal-oriented approach for effective product development. Several of the practical use cases available in the existing design thinking discourse refer to oneoff case for solving specific problems or its application in a business-to-customer set-up. Thepurpose of this master thesis was to critically examine how design thinking could be implementedin a business to business (B2B) company with well-developed product development processes(PDP) to balance customer centricity with product strategy. To understand the impact of design thinking in such companies, barriers preventing design thinking's implementation and the opportunities enabling its implementation were explored using a single case study approach at Mycronic AB office at Täby, Sweden. The material for the case study was gathered through internal and external qualitative interviews. The results from these interviews were used to propose a framework and pilot programs that would facilitate Mycronic to introduce design thinking principles to its existing product development process. The goal of the framework is to empowera business-to-business company with well-developed product development processes to adapt design thinking principles so as to increase their understanding of end customers' spoken and unspoken needs, recognize the needs of internal stakeholders, and improve their ability to secure the right initiatives in the early phase of a project.