Grassland birds have declined more than any other guild of birds in North America, largely due to loss and degradation of native grasslands. The Conservation Reserve Program (CRP) has restored some native warm-season grasses (NWSG), but grassland birds continued to decline (-1.1% annually) partly due to the limited acreage converted (1% of southeastern US). Using NWSG in production settings provides profit incentive to landowners while reducing dependency on government programs. Studies examining these production practices and their effect on grassland birds east of the Great Plains are limited. During 2009 – 2010, I surveyed 102 NWSG fields in Kentucky and Tennessee being used for production purposes (control, biofuel, seed, hay, and pasture treatments) to assess bird use and vegetation characteristics. Landscape cover around each field (250, 500, and 1000 m) was digitized from aerial photography. Using analysis of variance (ANOVA), I compared bird (relative abundance, species diversity, and species richness) and vegetation (average height, litter depth, vertical cover, litter cover, and vegetation cover) metrics across the five treatments. Relative abundance for all species, species diversity, and species richness were all greater for seed production fields (P <0.05); other treatments did not differ. Field sparrows (Spizella pusilla) were less abundant (P <0.05) in biofuel than control, hay and graze treatments, whereas eastern meadowlarks (Sturnella magna) and dickcissels (Spiza americana) were more abundant in seed fields. Average vegetation height, vertical cover, percent litter, percent forbs and percent woody plants differed (P <0.05) among treatments. Using Program Mark, I modeled occupancy for field sparrow, red-winged blackbird (Agelaius phoeniceus), eastern meadowlark, and northern bobwhite (Colinus virginianus) using vegetation and landscape cover as covariates. Treatment was influential in field sparrow and eastern meadowlark models, but not those for red-winged blackbird and northern bobwhite. Occupancy for field sparrow and northern bobwhite were affected by woody cover (+), for red-winged blackbird by vegetation height (-), and for eastern meadowlark by litter depth (+) or percent NWSG (+). All four species were negatively affected by forest within 250-m. Use of NWSG in production could increase the amount of available habitat and thus, help conservation efforts for grassland birds.

Generalised polyneuropathy (PNP) is a common cause to neurological impairment, and may be an early symptom of a severe systemic disease. One such illness is hereditary transthyretin (TTR) amyloidosis (ATTR), a progressive fatal disorder caused by a mutation on the TTR gene. More than 100 such mutations have been found worldwide, of which Val30Met is the most common neuropathic variant with initial clinical manifestations indicating small fiber impairment. Differences in onset age, penetrance and phenotypes are present between endemic areas. Liver transplantation generally slows the progress of the symptom development, especially in patients with short disease duration. Ongoing research has also shown promising results with drug interventions. In any event, early diagnosis of PNP onset in ATTR patients is crucial to ensure early therapeutic interventions. Nerve conduction studies (NCS) and electromyography (EMG) provide the basis for evaluation of the functional state of the thick myelinated nerve fibres in patients with symptoms of PNP, but no such quantitative methods are available for the thin myelinated or unmyelinated fibers. Instead, a psychophysical method with thermal quantitative sensory testing (QST) can provide indirect information about the overall function in the afferent small fiber systems. The purpose of thesis was to evaluate the applicability of QST by the Method-of-limits (MLI) for early detection of PNP in Swedish ATTR patients with the Val30Met mutation. In healthy subjects the repeatability of the MLI was assessed, and reference values for thermal perception thresholds (TPT) in several body regions were determined. No significant differences in TPT or pain thresholds were found at repeated testing with MLI, indicating that the MLI is a reliable method. However, the results show that the arrangement of the testing order is of importance, as cold (CT) and warm (WT) perception thresholds were significantly elevated when tested after thermal pain assessments, instead of before. I general, the TPT was more elevated at lower parts of the body compared to the upper part, and with higher WT than CT, fully in accordance with the underlying anatomical and physiological prerequisites for QST. In biopsy verified ATTR patients lacking EMG and NCS abnormalities, significantly elevated TPT were found compared to controls. Furthermore, significantly more increased TPT were observed in patients with an early onset of the disease, compared those with a late onset. Finally, a combined detailed evaluation of QST and heart rate variability (HRV) analyses demonstrated correlations between QST and HRV abnormalities in patients with late onset, but not in those with early onset. The present thesis emphasizes the importance of incorporating QST early in the clinical evaluation of ATTR patients with a Val30Met mutation and with symptoms of thin fiber PNP. This is particularly indicated when patients report symptoms, or show signs, of neuropathic small fiber affection, but simultaneously exhibit normal EMG and NCS findings. The results furthermore underline the importance of performing both QST and HRV for a complete evaluation of both the thin somatic and autonomic nerve fibers, as both types of nerves may be affected early in the ATTR disease.

Never before has the interest for charity been greater. At this writing, U.S. charities have collected nearly one billion U.S. dollars (!) only in the aid for the disaster victims in Haiti.But can you get people to give even more? Are there yet unexplored market in which charitable organizations still have growth potential? Traditional economic theory which is based in individuals' rational behavior and self-utility maximization has a hard time to explain the phenomenon of charitable donations. But relatively new research can possibly connect the theory and the phenomenon through the theorem of warm-glow in why people actually donate money anonymously and indirectly to people they never met or will ever know who made the donation. This thesis will examine whether or not a small change in the environment could influence individuals to donate more money and / or more frequently. The study was conducted as a field experiment at an ICA store deposit station where people are faced with the choice to donate their deposit to the Swedish Red Cross instead of getting a voucher for themselves. The obtained results shows a statistically significant difference between the donation of the pledge of over 13 percentage more in the presence of a visual stimulus, more specifically a picture of a poor boy drinking clean water from a tap. That results in a doubling in nominal amounts of donations for the charity. Moreover, I find that people who already before the experiment are sympathetic to donating the pledge do so to a greater extent than people who were not. Neither sex nor age seemed to affect the results in any way.

A 147cm sediment core from Lake DV09, northern Devon Island, Nunavut, Canada (75° 34’34”N, 89° 18’55”W) contains annually-laminated (varved) sediments, providing a 1600-year record of climate variability. A minerogenic lamina deposited during the annual thaw period and a thin deposit of organic matter deposited during the summer and through the winter, together form a clastic-organic couplet each year. The thinnest varves occur from AD800-1050, and the thickest from AD1100-1300, during the Medieval Warm Period. The relative sediment density is also highest during this period suggesting increased sediment transport energy. The coldest period of the Little Ice Age appears to be during the AD1600s. Varve widths over the past century indicate climate warming in the region. / This research program was funded by the Natural Sciences and Engineering Research Council of Canada (NSERC), and the Canadian Foundation for Climate and Atmospheric Sciences (CFCAS). A tuition bursary from Ultramar Inc. also helped in making this research possible. Logistical support was provided by the Polar Continental Shelf Project (PCSP Contribution number 04508).

Diverse forage mixtures have improved resilience to drought, improved persistence, ability to adapt to changing environmental conditions, reduced fertilizer costs, improved root mass and greater soil carbon sequestration but do they improve forage and animal production. The objective was to determine if complex native forage mixtures provide superior nutritional quality throughout the grazing season as compared to simple native mixtures. Three studies were conducted in 2007 at Swift Current, SK to evaluate forage production potentials, nutritive qualities and in vitro dry matter digestibility of native and tame forage species common to or having potential in Southwestern Saskatchewan. In study one, plots were seeded in 2006 on Chernozemic Orthic Brown Swinton Loam soils and consisted of 11 native and three tame monoculture species common to southwestern Saskatchewan. Clippings at a 5 cm stubble height occurred on June 20 and every 28 days after until October 10. Forage DM production, in vitro OMD, NDF, ADF, ADL, CP, Ca and P concentrations were measured. As species matured, production and OMD declined (P¡Ü0.05) but NDF, ADF and ADL concentrations increased (P¡Ü0.05). There were harvest date by species differences (P¡Ü0.05) in forage production and nutritional qualities of C3 and C4 grass and legume species. Study two examined the in situ CP, NDF and DM disappearance of six selected species harvested in the fall. EDNDF and ADDM values did not differ (P>0.05) among C3 grasses. The C4 grasses had higher (P<0.05) EDNDF and EDDM and the legume, Canadian milkvetch had the highest (P<0.05) EDDM but lowest EDNDF. Study three occurred in 2005, 2006 and 2007 to determine if complex native forage mixtures had superior forage and animal production as compared to simple forage stands. Grazing occurred from June through August to achieve 60% utilization. Animal weights and available, cage and residual forage yields were taken to determine production and utilization. Forage production and quality did not differ (P>0.05) between simple and complex forage mixtures but animal production (AUD ha-1) was higher on complex native mixtures. Overall results showed; 1) C3 and C4 grass and legume species have different growth patterns and qualities that can improve forage quality and degradability of the stand throughout the grazing season, 2) forage and animal production benefits associated with complex native forage mixtures largely depend on environmental conditions like temperature and moisture.

A 147cm sediment core from Lake DV09, northern Devon Island, Nunavut, Canada (75° 34’34”N, 89° 18’55”W) contains annually-laminated (varved) sediments, providing a 1600-year record of climate variability. A minerogenic lamina deposited during the annual thaw period and a thin deposit of organic matter deposited during the summer and through the winter, together form a clastic-organic couplet each year. The thinnest varves occur from AD800-1050, and the thickest from AD1100-1300, during the Medieval Warm Period. The relative sediment density is also highest during this period suggesting increased sediment transport energy. The coldest period of the Little Ice Age appears to be during the AD1600s. Varve widths over the past century indicate climate warming in the region. / This research program was funded by the Natural Sciences and Engineering Research Council of Canada (NSERC), and the Canadian Foundation for Climate and Atmospheric Sciences (CFCAS). A tuition bursary from Ultramar Inc. also helped in making this research possible. Logistical support was provided by the Polar Continental Shelf Project (PCSP Contribution number 04508).

Diatom analyses were carried out on sediment cores collected from two low-lying, closed-drainage basins (PAD 9 - 58º46. 46?N, 111º19. 48?W; PAD 12 - 58º57. 29?, 111º19. 74?) in the Peace sector of the Peace-Athabasca Delta (PAD), Alberta, Canada, to provide >1000 year long records of hydro-ecological change. Results from diatom analyses were compared with macrofossil and stable isotope records from the same cores and assessed within the framework of an Athabasca River headwater climate record inferred from isotope dendroclimate data. Results from PAD 9 and PAD 12 sediment cores indicated closed-drainage conditions during the Medieval Warm Period (MWP) and the post-Little Ice Age and high water conditions during the Little Ice Age (LIA). High water levels at PAD 9 and PAD 12 reflected high water conditions on Lake Athabasca and the Rivière des Rochers or possibly the Peace River during the LIA (~AD 1600-1900). High water conditions were also observed at low-lying sites in the central and southern regions of the PAD (PAD 31 and PAD 37), and corresponded with evidence of high streamflows on the North Saskatchewan River. In contrast, desiccation evident at PAD 5, a site largely isolated from river influence, reflected atmospherically dry conditions during the LIA. Consistent with changes observed at PAD 5, sediment records at PAD 15, an oxbow lake off the Revillion Coupé, demonstrated low flood frequency during the early to mid-1700s. Increased water levels evident at low-lying sites located in proximity to the central open-drainage network of lakes and rivers were likely due to higher flows on the Athabasca River and potentially on the Peace River. High flows on rivers of the PAD may be attributed to snowmelt-dominated runoff during the LIA relative to the rainfall-dominated runoff during MWP (prior to ~AD 1600) and the post-LIA period (~AD 1900 to present).

An experimental and numerical study of the isothermal and non-isothermal warm formability of an AA3003 aluminum alloy brazing sheet is presented. Forming limit diagrams were determined using warm limiting dome height (LDH) experiments with in situ strain measurement based on digital image correlation (DIC) techniques. Forming limit curves (FLCs) were developed at several temperature levels (room temperature, 100ºC, 200ºC, 250ºC, and 300ºC) and strain-rates (0.003, 0.018, and 0.1s-1). The formability experiments demonstrated that temperature has a significant effect on formability, whereas forming speed has a mild effect within the studied range. Elevating the temperature to 250C improved the formability more than 200% compared to room temperature forming, while forming at lower speeds increased the limiting strains by 10% and 17% at room temperature and 250ºC, respectively. Non-isothermal deep draw experiments were developed considering an automotive heat exchanger plate. A parametric study of the effects of die temperature, punch speed, and blank holder force on the formability of the part was conducted. The introduction of non-isothermal conditions in which the punch is cooled and the flange region is heated to 250C resulted in a 61% increase in draw depth relative to room temperature forming. In order to develop effective numerical models of warm forming processes, a constitutive model is proposed for aluminum alloy sheet to account for temperature and strain rate dependency, as well as plastic anisotropy. The model combines the Barlat YLD2000 yield criterion (Barlat et al., 2003) to capture sheet anisotropy and the Bergstrom (1982) hardening rule to account for temperature and strain rate dependency. Stress-strain curves for AA3003 aluminum alloy brazing sheet tested at elevated temperatures and a range of strain rates were used to fit the Bergstrom parameters, while measured R-values were used to fit the yield function parameters. The combined constitutive model was implemented within a user defined material subroutine that was linked to the LS-DYNA finite element code. Finite element models were developed based on the proposed material model and the results were compared with experimental data. Isothermal uniaxial tensile tests were simulated and the predicted responses were compared with measured data. The tensile test simulations accurately predicted material behaviour. The user material subroutine and forming limit criteria were then applied to simulate the isothermal warm LDH tests, as well as isothermal and non-isothermal warm deep drawing experiments. Two deep draw geometries were considered, the heat exchanger plate experiments developed as part of this research and the 100 mm cylindrical cup draw experiments performed by McKinley et al. (2010). The strain distributions, punch forces and failure location predicted for all three forming operations were in good agreement with the experimental results. Using the warm forming limit curves, the models were able to accurately predict the punch depths to failure as well as the location of failure initiation for both the isothermal and non-isothermal deep draw operations.

Diverse forage mixtures have improved resilience to drought, improved persistence, ability to adapt to changing environmental conditions, reduced fertilizer costs, improved root mass and greater soil carbon sequestration but do they improve forage and animal production. The objective was to determine if complex native forage mixtures provide superior nutritional quality throughout the grazing season as compared to simple native mixtures. Three studies were conducted in 2007 at Swift Current, SK to evaluate forage production potentials, nutritive qualities and in vitro dry matter digestibility of native and tame forage species common to or having potential in Southwestern Saskatchewan. In study one, plots were seeded in 2006 on Chernozemic Orthic Brown Swinton Loam soils and consisted of 11 native and three tame monoculture species common to southwestern Saskatchewan. Clippings at a 5 cm stubble height occurred on June 20 and every 28 days after until October 10. Forage DM production, in vitro OMD, NDF, ADF, ADL, CP, Ca and P concentrations were measured. As species matured, production and OMD declined (P¡Ü0.05) but NDF, ADF and ADL concentrations increased (P¡Ü0.05). There were harvest date by species differences (P¡Ü0.05) in forage production and nutritional qualities of C3 and C4 grass and legume species. Study two examined the in situ CP, NDF and DM disappearance of six selected species harvested in the fall. EDNDF and ADDM values did not differ (P>0.05) among C3 grasses. The C4 grasses had higher (P<0.05) EDNDF and EDDM and the legume, Canadian milkvetch had the highest (P<0.05) EDDM but lowest EDNDF. Study three occurred in 2005, 2006 and 2007 to determine if complex native forage mixtures had superior forage and animal production as compared to simple forage stands. Grazing occurred from June through August to achieve 60% utilization. Animal weights and available, cage and residual forage yields were taken to determine production and utilization. Forage production and quality did not differ (P>0.05) between simple and complex forage mixtures but animal production (AUD ha-1) was higher on complex native mixtures. Overall results showed; 1) C3 and C4 grass and legume species have different growth patterns and qualities that can improve forage quality and degradability of the stand throughout the grazing season, 2) forage and animal production benefits associated with complex native forage mixtures largely depend on environmental conditions like temperature and moisture.

Profile strips have been used in various industries and now the demand of profile strip is still growing. Due to different reductions at different parts of the strips, profile strips after rolling generate a defect which looks like a wave. This study will design and manufacture a four-high profile rolling mill, which can roll profile strips. Experiments and finite element simulation are conducted to discuss the effects of different parameters on strip size and the defect of the profiled strips. In this study, a finite element analysis software is used to establish profile rolling models with different material setting mode, reduction, temperature, material, tension, and roll shape. From the simulation results, the effects of these parameters on the defects are discussed. Secondly, profiled rolls are designed and a heating equipment is added on the four-high rolling mill, and rolling experiments with different reduction, materials, passes of process, roll shape and temperature are conducted. From the experimental results the effects of these parameters on size of the defect of profile strip are discussed. Finally, from the comparisons between simulation results and experiment results, the feasibility of finite element models are verified.