21 |
Air turbine design study for a wave energy conversion systemAckerman, Paul Henry 03 1900 (has links)
Thesis (MScEng (Mechanical and Mechatronic Engineering))--University of Stellenbosch, 2010.
|
22 |
Dispersal in free-living, marine, benthic nematodes : passive or active processes?Ullberg, Jörgen January 2004 (has links)
<p>Meiofauna, and especially marine nematodes are common in sediments around the world. Despite very wide ranging distributions in many nematode species, little is presently known about their dispersal mechanisms shaping these patterns. Rafting, and perhaps ballast water transport has been suggested as viable means for nematode long-range transport. On a much smaller scale other processes have been suggested for their dispersal. They generally include some form of passive suspension into the water column and later on a passive, haphazard settling back towards the bottom.</p><p>Small-scale phenomena in nematode dispersal were studied by conducting a series of studies at Askö field station, Trosa Archipelago, Baltic proper. Studied aspects were one case of macrofaunal influence on nematode dispersal rate, using an amphipod, <i>Monoporeia affinis</i> as disturbing agent, and three different studies on mechanisms related to settling. The experiments were conducted both in laboratory and field settings.</p><p>The amphipod <i>Monoporeia affinis</i> did not exert any influence on the dispersal rate in the nematodes. The nematode dispersal was only an effect of time, in the aspect that the more time that past, the more nematodes dispersed from their place of origin. The settling experiments revealed that nematodes do have an active component in their settling behaviour, as they were able to exert influence on the spot where they were to settle. They were able to choose settling spot in response to the food quality of the sediment. It also became evident that contrary to common belief, nematodes are able to extend their presence in the water column far beyond the times that would be predicted considering settling velocities and hydrodynamic conditions alone.</p>
|
23 |
Dispersal in free-living, marine, benthic nematodes : passive or active processes?Ullberg, Jörgen January 2004 (has links)
Meiofauna, and especially marine nematodes are common in sediments around the world. Despite very wide ranging distributions in many nematode species, little is presently known about their dispersal mechanisms shaping these patterns. Rafting, and perhaps ballast water transport has been suggested as viable means for nematode long-range transport. On a much smaller scale other processes have been suggested for their dispersal. They generally include some form of passive suspension into the water column and later on a passive, haphazard settling back towards the bottom. Small-scale phenomena in nematode dispersal were studied by conducting a series of studies at Askö field station, Trosa Archipelago, Baltic proper. Studied aspects were one case of macrofaunal influence on nematode dispersal rate, using an amphipod, Monoporeia affinis as disturbing agent, and three different studies on mechanisms related to settling. The experiments were conducted both in laboratory and field settings. The amphipod Monoporeia affinis did not exert any influence on the dispersal rate in the nematodes. The nematode dispersal was only an effect of time, in the aspect that the more time that past, the more nematodes dispersed from their place of origin. The settling experiments revealed that nematodes do have an active component in their settling behaviour, as they were able to exert influence on the spot where they were to settle. They were able to choose settling spot in response to the food quality of the sediment. It also became evident that contrary to common belief, nematodes are able to extend their presence in the water column far beyond the times that would be predicted considering settling velocities and hydrodynamic conditions alone.
|
24 |
Pneumatic power measurement of an oscillating water column converterKooverji, Bavesh 04 1900 (has links)
Thesis (MScEng)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: A measurement device was developed to accurately determine the pneumatic
power performance of an Oscillating Water Column (OWC) model in a wave
flume. The analysis of the pneumatic power is significant due to the wave-topneumatic
energy being the primary energy conversion process and where the
most energy losses can be expected. The aim of the research study is to address
the accurate pneumatic power measurement of unsteady and bidirectional airflow
in OWC model experiments.
The two fundamental measurements required for the pneumatic power
measurement are the pressure difference over an orifice on the OWC model and
the volumetric flow rate of air through the outlet. The designed, constructed and
assembled measurement device comprised of a venturi flow meter, containing a
hot-film anemometer, which could measure the pressure drop and the volumetric
flow rate in one device. The assembled pneumatic power measurement device
was calibrated in a vertical wind tunnel at steady state. The results from the
calibration tests showed that the volumetric flow rate measurements from the
pneumatic power measurement device was accurate to within 3 % of the wind
tunnel’s readings. The pneumatic power measurement device was incorporated
onto a constructed Perspex physical model of a simple OWC device. This
assembled system was used as the test unit in the wave flume at Stellenbosch
University (SUN).
The results from the experimental tests underwent comparative analysis with
three analytical OWC air-flow models which were simulated as three scenarios
using Matlab Simulink. These results showed that the measurement device has the
ability to measure the pneumatic power but there is difficulty in modelling the
complex air-flow system of the OWC device. This results in varying levels of
agreement between the experimental and simulated pneumatic power results. The research study has revealed that there is difficulty in designing an accurate
device for a wide range of test parameters due to the variance in output values.
The unsteady and bidirectional nature of the air flow is also difficult to accurately
simulate using a one-dimensional analytical model. Recommendations for further
investigation are for CFD systems to be used for the analysis of the air-flow in an
OWC system and to be used to validate future pneumatic power measurement
devices. / AFRIKAANSE OPSOMMING: ‘n Meetinstrument was ontwikkel om die pneumatiese kraglewering van ‘n model
van die Ossillerende Water Kolom (OWK) golfenergie omsetter in ‘n golf tenk
akkuraat te meet. Dit is belangrik om die omskakeling van golf na pneumatiese
energie te analiseer siende dat die grootste energieverlies in dié proses plaasvind.
Die doel van hierdie navorsingsprojek was om die akkurate pneumatiese
kragmeting van variërende en twee-rigting vloei van lug in ‘n OWK model na te
vors.
Die twee fundamentele metings wat benodig word vir die pneumatiese
kragbepaling is die drukverskil oor die vloei vernouing en die volumetriese
vloeitempo van lug deur die uitlaat van die toetstoestel. Die spesiaal ontwerpte
meettoestel wat gebruik is in die eksperiment het bestaan uit ‘n venturi vloeimeter
wat ‘n verhitte-film anemometer bevat het wat die drukverandering en die
volumetriese vloeitempo kan meet in ‘n enkele instrument. Die pneumatiese
kragmeting was gekalibreer in ‘n vertikale windtonnel waarin ‘n konstante vloei
tempo geïnduseer was. Die kalibrasieproses het bevestig dat die meettoestel
metings lewer met ‘n fout van minder as 3 % wanneer dit vergelyk word met die
bekende konstante vloei tempo soos bepaal in die windtonnel. ‘n Fisiese model
van ‘n vereenvoudigde OWK golfenergie omsetter was ontwerp en gebou uit
Perspex om as toetstoestel te gebruik vir die evaluering van die ontwerpte
pneumatiese kraglewering meettoestel. Die toetse was uitgevoer in ‘n golftenk by
die Universiteit Stellenbosch (SUN).
The toetsresultate was vergelyk met drie ander OWK lugvloei modelle wat
gesimuleer was deur om die analitiese modelle op te stel en te simuleer in Matlab
Simulink. Die vergelyking van modellering resultate het gewys dat die meettoestel
die vermoë het om pneumatiese krag te meet. Daar was wel komplikasies met die
modellering van die komplekse lugvloei in die OWK toestel, die resultate het geen
definitiewe ooreenstemming gewys tussen die eksperimentele en gesimuleerde
pneumatiese krag resultate nie. Die navorsingsprojek het gewys dat daar komplikasies is om ‘n enkel toestel te
ontwerp wat oor ‘n wye bereik kan meet weens die variasie van die verskillende
parameters. Die variërende en twee-rigting lugvloei is ook moeilik om akkuraat te
simuleer met ‘n een-dimensionele analitiese simulasie model. Aanbevelings vir
verdere navorsing sluit in om die lugvloei in die OWK stelsel te modelleer en te
analiseer in ‘n drie-dimensionele model om die lesings van ‘n pneumatiese krag
meettoestel te bevestig.
|
25 |
Aplicação do método Design Construtal na avaliação numérica da potência hidropneumática de um dispositivo coluna de água oscilante com região de transição trapezoidal ou semicircular e estudo da influência da turbina no formato elípticoLima, Yuri Theodoro Barbosa de January 2016 (has links)
A conversão da energia das ondas dos oceanos em energia elétrica é uma alternativa para o problema da falta de combustíveis fósseis. Uma das possibilidades de aproveitamento é através de dispositivos cujo princípio de funcionamento é o de Coluna de Água Oscilante (CAO). No presente trabalho o objetivo é, através da modelagem computacional e do emprego do Design Construtal, maximizar a potência hidropneumática de um dispositivo conversor de energia das ondas do mar do tipo CAO. São analisados diferentes eixos da restrição física, no formato elíptico, que representa a turbina, e duas formas geométricas na região de transição entre a câmara hidropneumática e a chaminé do dispositivo CAO: trapezoidal e semicircular. Considerando um domínio bidimensional, as restrições para estes problemas são: Área da restrição elíptica (AR), Área total do dispositivo (AT) e razão entre a área da restrição elíptica e a área total (ϕn). Os graus de liberdade analisados são: a razão entre os comprimentos dos eixos da restrição elíptica (d1/d2) para o caso da restrição física da turbina, o ângulo de inclinação da parede (α) para o caso com região de transição trapezoidal, o raio (r) e H2/l (razão entre altura e comprimento da chaminé de saída da câmara CAO) para o caso com região de transição semicircular. Para a solução numérica é empregado um código de dinâmica dos fluidos computacional, FLUENT®, baseado no Método de Volumes Finitos (MVF). O modelo multifásico Volume of Fluid (VOF) é aplicado no tratamento da interação água-ar. O domínio computacional é representado por um tanque de ondas com um dispositivo CAO acoplado. Os resultados obtidos indicam que, para o estudo da região de transição trapezoidal o desempenho do conversor tem aproximadamente o mesmo desempenho para todas as geometrias estudadas. A região de transição semicircular, apresenta resultados para os quais foi possível otimizar a potência hidropneumática. O estudo da turbina indica que foi possível determinar uma geometria capaz de converter a energia da onda incidente ao dispositivo, sem que ocorresse a obstrução do escoamento de ar na chaminé do dispositivo CAO. Assim, mostra-se a relação entre o método Design Construtal e o clima de ondas na definição das dimensões que maximizam a potência hidropneumática. / The conversion of ocean’s wave energy into electrical energy is an alternative for the scarcity of fossil fuels. One of the possibilities of energy use is through devices, whose operating principle is the Oscillating Water Column (OWC). In this work the aim is, through computer modeling and the Constructal Design, to maximize hydropneumatic power of a power converter device type OWC. Different axes of physical constraint with elliptical shape, representing the effect of the turbine , are analyzed. Two geometric shapes in the transition region between the hydropneumatic chamber and the chimney OWC device, trapezoidal and semicircular, are also analyzed. Considering a two-dimensional domain the restrictions for this problem are: Elliptical restriction area (AR), Total area device (AT) and the ratio between the area of the elliptical restraint and the total area (ϕn). The considered degrees of freedom are: the ratio between the lengths of the axes (d1/d2) of the elliptical restraint, for the turbine’s physical constraint case, the inclination angle (α) of the wall for the trapezoidal transition case, and the radius (r) and H2/l (ratio between height and length of output chimney CAO) for the semicircular transition region case. For the numerical solution, a commercial code of computational fluid dynamics, FLUENT®, which is based on the Finite Volume Method (FVM), is employed. The multiphase model Volume of Fluid (VOF) is applied in the treatment of water-air interaction. The computational domain is represented by a wave tank with a fixed OWC device. The obtained results indicate that, for the study of the trapezoidal transition region, the performance of converter don’t seems to be compensatory only by changing the geometry of the trapezoidal area. However, for the semicircular transition region, it was possible to optimize a hydropneumatic power. The study of turbine effect indicates a geometry capable of converting the energy of the incident wave to the device, without obstructing the air flow in the chimney of de OWC, showing the relationship between the Constructal Design method and the wave climate in the definition of the dimensions that maximize the hydropneumatic power.
|
26 |
CFD optimisation of an oscillating water column wave energy converterHorko, Michael January 2008 (has links)
Although oscillating water column type wave energy devices are nearing the stage of commercial exploitation, there is still much to be learnt about many facets of their hydrodynamic performance. This research uses the commercially available FLUENT computational fluid dynamics flow solver to model a complete OWC system in a two dimensional numerical wave tank. A key feature of the numerical modelling is the focus on the influence of the front wall geometry and in particular the effect of the front wall aperture shape on the hydrodynamic conversion efficiency. In order to validate the numerical modelling, a 1:12.5 scale experimental model has been tested in a wave tank under regular wave conditions. The effects of the front lip shape on the hydrodynamic efficiency are investigated both numerically and experimentally and the results compared. The results obtained show that with careful consideration of key modelling parameters as well as ensuring sufficient data resolution, there is good agreement between the two methods. The results of the testing have also illustrated that simple changes to the front wall aperture shape can provide marked improvements in the efficiency of energy capture for OWC type devices.
|
27 |
Constructal design de dispositivos conversores de energia das ondas do mar em energia elétrica do tipo coluna de água oscilante / Constructal design of an oscillating water column device for the conversion of wave ocean energy into electrical energyGomes, Mateus das Neves January 2014 (has links)
O presente trabalho apresenta um estudo numérico bidimensional sobre a otimização da geometria de um dispositivo conversor de energia das ondas do mar em energia elétrica. O objetivo principal é, através da modelagem computacional de um dispositivo cujo principio de funcionamento é o de Coluna de Água Oscilante (CAO) e do emprego de Constructal Design, maximizar a conversão da energia das ondas do mar em energia elétrica. Essa técnica é baseada na Teoria Constructal. O aspecto inédito deste trabalho, em relação aos estudos disponíveis na literatura, é o fato de levar em conta o clima de ondas de uma dada região e, a partir disso, dimensionar o dispositivo de modo que ele tenha um desempenho otimizado. Para tanto, foi empregado o método Constructal Design, os graus de liberdade empregados são: H1/L (razão entre a altura e o comprimento da câmara CAO) e H3 (profundidade de submersão do dispositivo CAO). A relação H2/l (razão entre altura e comprimento da chaminé de saída da câmara CAO) é considerada um parâmetro fixo. Foram realizados estudos levando em conta uma onda em escala de laboratório e um espectro de ondas real. Foi também realizado um estudo sobre a influência da perda de carga da turbina através de uma restrição física. Para a solução numérica foi empregado um código comercial de dinâmica dos fluidos computacional, FLUENT®, baseado no Método de Volumes Finitos (MVF). A geometria e a geração a malha foi realizada no software GAMBIT®. O modelo multifásico Volume of Fluid (VOF) é aplicado no tratamento da interação água-ar. O domínio computacional é representado por um tanque de ondas com o dispositivo CAO acoplado. Os resultados obtidos mostram que é possível estabelecer uma razão de H1/L ótimo, conhecendo-se o clima de ondas, ou seja, o recomendável é que esta razão seja igual a quatro vezes a altura da onda dividido pelo comprimento da onda incidente. / The present work presents a two-dimensional numerical study about the geometric optimization of an ocean Wave Energy Converter (WEC) into electrical energy. The main goal is, through computational modeling of a device whose operating principle is the Oscillating Water Column (OWC) and from employment Constructal Design, to maximize the conversion of energy of ocean waves into electricity. This technique is based on Constructal Theory. The inedited aspect of this work comparing to the available studies is that it takes into account the wave climate of a given region to design the device so that it achieves optimum performance. Constructal Design is employed varying the degrees of freedom H1/L (ratio between the height and length of OWC chamber) and H3 (lip submergence). While the relation H2/l (ratio between height and length of chimney) is kept fixed. Studies were performed considering a wave on a laboratory scale and a spectrum of real waves. Yet a study of the influence of the turbine pressure losses was performed using a physical constraint. For the numerical solution it is used the Computational Fluid Dynamic (CFD) commercial code FLUENT®, based on the Finite Volume Method (FVM). The geometry and mesh generation was performed in GAMBIT ® software. The multiphasic Volume of Fluid (VOF) model is applied to tackle with the water-air interaction. The computational domain is represented by an OWC device coupled with the wave tank. The results show that it is possible to establish a relationship of H1 / L optimum, if the wave climate is know. It is recommended that this ratio be equal to four times the height of the wave divided by the length of the incident wave.
|
28 |
Estudo numérico bidimensional com aplicação de constructal design para otimização da geometria e da profundidade de submersão de um dispositivo conversor de ondas do mar tipo coluna d'água oscilanteLara, Maria Fernanda Espinel January 2015 (has links)
O presente trabalho tem como objetivo maximizar a potência hidropneumática convertida num dispositivo do tipo Coluna d'Água Oscilante (CAO). Para fazê-lo, o método Constructal Design é aplicado para aprimorar a geometria e a profundidade de submersão do dispositivo. No desenvolvimento do método Constructal são propostos e analisados três graus de liberdade: H1/L (razão entre a altura e comprimento da câmara do dispositivo CAO), H2/l (razão entre a altura da câmara e o comprimento da chaminé) e H3 (profundidade de submersão do dispositivo CAO). As restrições do problema (parâmetros constantes) são a área da câmara A1 e a área total do dispositivo CAO A2. O domínio computacional consiste de um dispositivo CAO inserido num tanque que é submetido a ondas na escala real. A malha é desenvolvida no software Ansys Icem®. O código de Dinâmica dos Fluidos Computacional Ansys Fluent® é empregado para encontrar a solução numérica a qual é baseada no método dos Volumes Finitos. O modelo multifásico Volume of Fluid (VOF) é usado na interação das fases água-ar. Os resultados indicam que a potência hidropneumática máxima obtida é de 190 W para razões de H1/L, H2/l e H3 iguais a 0,135, 6,0 e 9,5 m respectivamente. Por outro lado, o menor valor obtido da potência hidropneumática é de quase 11 W, o que mostra a utilidade do método Constructal, para fornecer uma relação entre o clima de ondas de um lugar determinado e as dimensões ótimas do dispositivo CAO. / The present work aims to maximize the hydropneumatic power converted in an Oscillating Water Column (OWC) device. To do this, Constructal Design is applied to optimize its geometry and submergence. For the development of Constructal method, it has been proposed and analyzed three degrees of freedom: H1/ L (ratio between the height and length of OWC chamber), H2/l (ratio between height and length of chimney), and H3 (submergence). The problem constraints (fixed parameters) are total area of the OWC chamber A1 and total area of OWC device A2. The computational domain consists of an OWC inserted in a tank where waves in a real scale are generated. The mesh is developed in ANSYS ICEM®. The Computational Fluid Dynamics code FLUENT® is used to find the numerical solution which is based on Finite Volume Method (FVM). The multiphasic Volume of Fluid (VOF) model is applied to tackle with the water-air interaction. The results show that the maximum hydropneumatic power obtained was 190 W for H1/L, H2/l e H3 ratios equal to 0.135, 6.0 and 9.5 m respectively. In contrast, the smaller value obtained for the hydropneumatic power is almost 11 W. So, it shows the utility of Constructal Method which provides a relationship between the wave climate of a particular place and the optimal dimensions for the OWC device.
|
29 |
Aplicação do método Design Construtal na avaliação numérica da potência hidropneumática de um dispositivo coluna de água oscilante com região de transição trapezoidal ou semicircular e estudo da influência da turbina no formato elípticoLima, Yuri Theodoro Barbosa de January 2016 (has links)
A conversão da energia das ondas dos oceanos em energia elétrica é uma alternativa para o problema da falta de combustíveis fósseis. Uma das possibilidades de aproveitamento é através de dispositivos cujo princípio de funcionamento é o de Coluna de Água Oscilante (CAO). No presente trabalho o objetivo é, através da modelagem computacional e do emprego do Design Construtal, maximizar a potência hidropneumática de um dispositivo conversor de energia das ondas do mar do tipo CAO. São analisados diferentes eixos da restrição física, no formato elíptico, que representa a turbina, e duas formas geométricas na região de transição entre a câmara hidropneumática e a chaminé do dispositivo CAO: trapezoidal e semicircular. Considerando um domínio bidimensional, as restrições para estes problemas são: Área da restrição elíptica (AR), Área total do dispositivo (AT) e razão entre a área da restrição elíptica e a área total (ϕn). Os graus de liberdade analisados são: a razão entre os comprimentos dos eixos da restrição elíptica (d1/d2) para o caso da restrição física da turbina, o ângulo de inclinação da parede (α) para o caso com região de transição trapezoidal, o raio (r) e H2/l (razão entre altura e comprimento da chaminé de saída da câmara CAO) para o caso com região de transição semicircular. Para a solução numérica é empregado um código de dinâmica dos fluidos computacional, FLUENT®, baseado no Método de Volumes Finitos (MVF). O modelo multifásico Volume of Fluid (VOF) é aplicado no tratamento da interação água-ar. O domínio computacional é representado por um tanque de ondas com um dispositivo CAO acoplado. Os resultados obtidos indicam que, para o estudo da região de transição trapezoidal o desempenho do conversor tem aproximadamente o mesmo desempenho para todas as geometrias estudadas. A região de transição semicircular, apresenta resultados para os quais foi possível otimizar a potência hidropneumática. O estudo da turbina indica que foi possível determinar uma geometria capaz de converter a energia da onda incidente ao dispositivo, sem que ocorresse a obstrução do escoamento de ar na chaminé do dispositivo CAO. Assim, mostra-se a relação entre o método Design Construtal e o clima de ondas na definição das dimensões que maximizam a potência hidropneumática. / The conversion of ocean’s wave energy into electrical energy is an alternative for the scarcity of fossil fuels. One of the possibilities of energy use is through devices, whose operating principle is the Oscillating Water Column (OWC). In this work the aim is, through computer modeling and the Constructal Design, to maximize hydropneumatic power of a power converter device type OWC. Different axes of physical constraint with elliptical shape, representing the effect of the turbine , are analyzed. Two geometric shapes in the transition region between the hydropneumatic chamber and the chimney OWC device, trapezoidal and semicircular, are also analyzed. Considering a two-dimensional domain the restrictions for this problem are: Elliptical restriction area (AR), Total area device (AT) and the ratio between the area of the elliptical restraint and the total area (ϕn). The considered degrees of freedom are: the ratio between the lengths of the axes (d1/d2) of the elliptical restraint, for the turbine’s physical constraint case, the inclination angle (α) of the wall for the trapezoidal transition case, and the radius (r) and H2/l (ratio between height and length of output chimney CAO) for the semicircular transition region case. For the numerical solution, a commercial code of computational fluid dynamics, FLUENT®, which is based on the Finite Volume Method (FVM), is employed. The multiphase model Volume of Fluid (VOF) is applied in the treatment of water-air interaction. The computational domain is represented by a wave tank with a fixed OWC device. The obtained results indicate that, for the study of the trapezoidal transition region, the performance of converter don’t seems to be compensatory only by changing the geometry of the trapezoidal area. However, for the semicircular transition region, it was possible to optimize a hydropneumatic power. The study of turbine effect indicates a geometry capable of converting the energy of the incident wave to the device, without obstructing the air flow in the chimney of de OWC, showing the relationship between the Constructal Design method and the wave climate in the definition of the dimensions that maximize the hydropneumatic power.
|
30 |
Constructal design de dispositivos conversores de energia das ondas do mar em energia elétrica do tipo coluna de água oscilante / Constructal design of an oscillating water column device for the conversion of wave ocean energy into electrical energyGomes, Mateus das Neves January 2014 (has links)
O presente trabalho apresenta um estudo numérico bidimensional sobre a otimização da geometria de um dispositivo conversor de energia das ondas do mar em energia elétrica. O objetivo principal é, através da modelagem computacional de um dispositivo cujo principio de funcionamento é o de Coluna de Água Oscilante (CAO) e do emprego de Constructal Design, maximizar a conversão da energia das ondas do mar em energia elétrica. Essa técnica é baseada na Teoria Constructal. O aspecto inédito deste trabalho, em relação aos estudos disponíveis na literatura, é o fato de levar em conta o clima de ondas de uma dada região e, a partir disso, dimensionar o dispositivo de modo que ele tenha um desempenho otimizado. Para tanto, foi empregado o método Constructal Design, os graus de liberdade empregados são: H1/L (razão entre a altura e o comprimento da câmara CAO) e H3 (profundidade de submersão do dispositivo CAO). A relação H2/l (razão entre altura e comprimento da chaminé de saída da câmara CAO) é considerada um parâmetro fixo. Foram realizados estudos levando em conta uma onda em escala de laboratório e um espectro de ondas real. Foi também realizado um estudo sobre a influência da perda de carga da turbina através de uma restrição física. Para a solução numérica foi empregado um código comercial de dinâmica dos fluidos computacional, FLUENT®, baseado no Método de Volumes Finitos (MVF). A geometria e a geração a malha foi realizada no software GAMBIT®. O modelo multifásico Volume of Fluid (VOF) é aplicado no tratamento da interação água-ar. O domínio computacional é representado por um tanque de ondas com o dispositivo CAO acoplado. Os resultados obtidos mostram que é possível estabelecer uma razão de H1/L ótimo, conhecendo-se o clima de ondas, ou seja, o recomendável é que esta razão seja igual a quatro vezes a altura da onda dividido pelo comprimento da onda incidente. / The present work presents a two-dimensional numerical study about the geometric optimization of an ocean Wave Energy Converter (WEC) into electrical energy. The main goal is, through computational modeling of a device whose operating principle is the Oscillating Water Column (OWC) and from employment Constructal Design, to maximize the conversion of energy of ocean waves into electricity. This technique is based on Constructal Theory. The inedited aspect of this work comparing to the available studies is that it takes into account the wave climate of a given region to design the device so that it achieves optimum performance. Constructal Design is employed varying the degrees of freedom H1/L (ratio between the height and length of OWC chamber) and H3 (lip submergence). While the relation H2/l (ratio between height and length of chimney) is kept fixed. Studies were performed considering a wave on a laboratory scale and a spectrum of real waves. Yet a study of the influence of the turbine pressure losses was performed using a physical constraint. For the numerical solution it is used the Computational Fluid Dynamic (CFD) commercial code FLUENT®, based on the Finite Volume Method (FVM). The geometry and mesh generation was performed in GAMBIT ® software. The multiphasic Volume of Fluid (VOF) model is applied to tackle with the water-air interaction. The computational domain is represented by an OWC device coupled with the wave tank. The results show that it is possible to establish a relationship of H1 / L optimum, if the wave climate is know. It is recommended that this ratio be equal to four times the height of the wave divided by the length of the incident wave.
|
Page generated in 0.0688 seconds