Seasonal patterns of snow accumulation in the Northern Hemisphere are changing in response to variations in Arctic climate. These changes have the potential to influence global climate, regional hydrology, and sensitive ecosystems as they become more pronounced. To refine our understanding of the role of snow in the Earth system, improved methods to characterize global changes in snow extent and mass are needed. Current space-borne observations and ground-based measurement networks lack the spatial resolution to characterize changes in volumetric snow properties at the scale of ground observed variation. Recently, radar has emerged as a potential complement to existing observation methods with demonstrated sensitivity to snow volume at high spatial resolutions (< 200 m). In 2009, this potential was recognized by the proposed European Space Agency Earth Explorer mission, the Cold Regions High Resolution Hydrology Observatory (CoReH2O); a satellite based dual frequency (17.2 and 9.6 GHz) radar for observation of cryospheric variables including snow water equivalent (SWE). Despite increasing international attention, snow-radar interactions specific to many snow cover types remain unevaluated at 17.2 or 9.6 GHz, including those common to the Canadian tundra. This thesis aimed to use field-based experimentation to close gaps in knowledge regarding snow-microwave interaction and to improve our understanding of how these interactions could be exploited to retrieve snow properties in tundra environments. Between September 2009 and March 2011, a pair of multi-objective field campaigns were conducted in Churchill, Manitoba, Canada to collect snow, ice, and radar measurements in a number of unique sub-arctic environments. Three distinct experiments were undertaken to characterize and evaluate snow-radar response using novel seasonal, spatial, and destructive sampling methods in previously untested terrestrial tundra environments. Common to each experiment was the deployment of a sled-mounted dual-frequency (17.2 and 9.6 GHz) scatterometer system known as UW-Scat. This adaptable ground-based radar system was used to collect backscatter measurements across a range of representative tundra snow conditions at remote terrestrial sites. The assembled set of measurements provide an extensive database from which to evaluate the influence of seasonal processes of snow accumulation and metamorphosis on radar response. Several advancements to our understanding of snow-radar interaction were made in this thesis. First, proof-of-concept experiments were used to establish seasonal and spatial observation protocols for ground-based evaluation. These initial experiments identified the presence of frequency dependent sensitivity to evolving snow properties in terrestrial environments. Expanding upon the preliminary experiments, a seasonal observation protocol was used to demonstrate for the first time Ku-band and X-band sensitivity to evolving snow properties at a coastal tundra observation site. Over a 5 month period, 13 discrete scatterometer observations were collected at an undisturbed snow target where Ku-band measurements were shown to hold strong sensitivity to increasing snow depth and water equivalent. Analysis of longer wavelength X-band measurements was complicated by soil response not easily separable from the target snow signal. Definitive evidence of snow volume scattering was shown by removing the snowpack from the field of view which resulted in a significant reduction in backscatter at both frequencies. An additional set of distributed snow covered tundra targets were evaluated to increase knowledge of spatiotemporal Ku-band interactions. In this experiment strong sensitivities to increasing depth and SWE were again demonstrated. To further evaluate the influence of tundra snow variability, detailed characterization of snow stratigraphy was completed within the sensor field of view and compared against collocated backscatter response. These experiments demonstrated Ku-band sensitivity to changes in tundra snow properties observed over short distances. A contrasting homogeneous snowpack showed a reduction in variation of the radar signal in comparison to a highly variable open tundra site. Overall, the results of this thesis support the single frequency Ku-band (17.2 GHz) retrieval of shallow tundra snow properties and encourage further study of X-band interactions to aid in decomposition of the desired snow volume signal.

Improved knowledge of the cryosphere state is paramount for continued model development and for accurate estimates of fresh water supply. This work focuses on evaluation and potential improvements of current snow datasets over the United States. Snow in mountainous terrain is most difficult to quantify due to the slope, aspect, and remote nature of the environment. Due to the difficulty of measuring snow quantities in the mountains, the initial study creates a new method to upscale point measurements to area averages for comparison to initial snow quantities in numerical weather prediction models. The new method is robust and cross validation of the method results in a relatively low mean absolute error of 18% for snow depth (SD). Operational models at the National Centers for Environmental Prediction which use Air Force Weather Agency (AFWA) snow depth data for initialization were found to underestimate snow depth by 77% on average. Larger error is observed in areas that are more mountainous. Additionally, SD data from the Canadian Meteorological Center, which is used for some model evaluations, performed similarly to models initialized with AFWA data. The use of constant snow density for snow water equivalent (SWE) initialization for models which utilize AFWA data exacerbates poor SD performance with dismal SWE estimates. A remedy for the constant snow density utilized in NCEP snow initializations is presented in the next study which creates a new snow density parameterization (SNODEN). SNODEN is evaluated against observations and performance is compared with offline land surface models from the National Land Data Assimilation System (NLDAS) as well as the Snow Data Assimilation System (SNODAS). SNODEN has less error overall and reproduces the temporal evolution of snow density better than all evaluated products. SNODEN is also able to estimate snow density for up to 10 snow layers which may be useful for land surface models as well as conversion of remotely-sensed SD to SWE. Due to the poor performance of previously evaluated snow products, the last study evaluates openly-available remotely-sensed snow datasets to better understand the strengths and weaknesses of current global SWE datasets. A new SWE dataset developed at the University of Arizona is used for evaluation. While the UA SWE data has already been stringently evaluated, confidence is further increased by favorable comparison of UA snow cover, created from UA SWE, with multiple snow cover extent products. Poor performance of remotely-sensed SWE is still evident even in products which combine ground observations with remotely-sensed data. Grid boxes that are predominantly tree covered have a mean absolute difference up to 87% of mean SWE and SWE less than 5 cm is routinely overestimated by 100% or more. Additionally, snow covered area derived from global SWE datasets have mean absolute errors of 20%-154% of mean snow covered area.

Current North American operational satellite passive microwave snow water equivalent (SWE) retrieval algorithms consistently underestimate SWE levels for tundra environments when compared to four years of regional snow surveys conducted in the Northwest Territories and northern Manitoba, Canada. Almost all contemporary SWE algorithms are based on the brightness temperature difference between the 37GHz and 19GHz frequencies found onboard both past and present spaceborne sensors. This underestimation is likely a result of the distribution and deposition of the tundra snow, coupled with the influence of tundra lakes on brightness temperatures at the 19GHz frequency. To better our understanding concerning the underestimation of passive microwave SWE retrievals on the tundra, Environment Canada collected in situ measurements of SWE, snow depth, and density at 87 sites within a 25km by 25km study domain located near Churchill, Manitoba in March 2006. Coincident multi-scale passive microwave airborne (70m & 500m resolution) and spaceborne (regridded to 12.5km & 25km resolution depending on frequency) data were measured at 6.9GHz, 19GHz, 37GHz and 89 GHz frequencies during the same time period. The snow survey data highlighted small-scale localized patterns of snow distribution and deposition on the tundra that likely influences current SWE underestimation. Snow from the open tundra plains is re-distributed by wind into small-scale vegetated features and micro-topographic depressions such as narrow creekbeds, lake edge willows, small stands of coniferous trees and polygonal wedge depressions. The very large amounts of snow deposited in these spatially-constrained features has little influence on the microwave emission measured by large-scale passive microwave spaceborne sensors and is therefore unaccounted for in current methods of satellite SWE estimation. The analysis of the passive microwave airborne data revealed that brightness temperatures at the 19GHz were much lower over some tundra lakes, effectively lowering SWE at the satellite scale by reducing the 37-19GHz brightness temperature difference used to estimate SWE. The unique emission properties of lakes in the wide open expanse of the tundra plains, coupled with an insensitivity to the large amounts of SWE deposited in small-scale features provides an explanation for current passive microwave underestimation of SWE in the tundra environment.

Current North American operational satellite passive microwave snow water equivalent (SWE) retrieval algorithms consistently underestimate SWE levels for tundra environments when compared to four years of regional snow surveys conducted in the Northwest Territories and northern Manitoba, Canada. Almost all contemporary SWE algorithms are based on the brightness temperature difference between the 37GHz and 19GHz frequencies found onboard both past and present spaceborne sensors. This underestimation is likely a result of the distribution and deposition of the tundra snow, coupled with the influence of tundra lakes on brightness temperatures at the 19GHz frequency. To better our understanding concerning the underestimation of passive microwave SWE retrievals on the tundra, Environment Canada collected in situ measurements of SWE, snow depth, and density at 87 sites within a 25km by 25km study domain located near Churchill, Manitoba in March 2006. Coincident multi-scale passive microwave airborne (70m & 500m resolution) and spaceborne (regridded to 12.5km & 25km resolution depending on frequency) data were measured at 6.9GHz, 19GHz, 37GHz and 89 GHz frequencies during the same time period. The snow survey data highlighted small-scale localized patterns of snow distribution and deposition on the tundra that likely influences current SWE underestimation. Snow from the open tundra plains is re-distributed by wind into small-scale vegetated features and micro-topographic depressions such as narrow creekbeds, lake edge willows, small stands of coniferous trees and polygonal wedge depressions. The very large amounts of snow deposited in these spatially-constrained features has little influence on the microwave emission measured by large-scale passive microwave spaceborne sensors and is therefore unaccounted for in current methods of satellite SWE estimation. The analysis of the passive microwave airborne data revealed that brightness temperatures at the 19GHz were much lower over some tundra lakes, effectively lowering SWE at the satellite scale by reducing the 37-19GHz brightness temperature difference used to estimate SWE. The unique emission properties of lakes in the wide open expanse of the tundra plains, coupled with an insensitivity to the large amounts of SWE deposited in small-scale features provides an explanation for current passive microwave underestimation of SWE in the tundra environment.

Résumé: La mesure de l’équivalent en eau de la neige (EEN) sur le terrain permet de prédire la quantité d’eau libérée par la fonte de la neige. La télédétection dans les micro-ondes passives offre le potentiel d’estimer I’EEN et peut complémenter ces observations de façon synoptique pour l’ensemble du territoire. Un produit de cartographie de I’EEN couvrant l’ensemble du globe a été élaboré par le NSIDC basé sur le capteur AMSR-E. Cet instrument, lancé en 2002, a une résolution améliorée par rapport aux capteurs antérieurs. L’estimation de I’EEN se base sur la différence entre un canal peu affecté (19 GHz) et un canal affecté (37 GHz) par la diffusion de volume de la neige. La précision de ce produit a été évaluée pour la province de Québec à l’hiver 2003 et à l’hiver 2004 qui ont un EEN moyen de 170 mm. Des sous-estimations importantes ont été révélées et une certaine difficulté à détecter la présence de neige. Des modèles régionaux de régressions linéaires ont été développés pour le Québec. Des corrections pour la fraction d’eau et de forêt ont été appliquées à la combinaison T19v.37v et ont permis d’améliorer les résultats. Ces corrections sont basées sur la température de l’air du modèle GEM. Les meilleurs résultats sont pour la classe de neige taïga à l’hiver 2003 avec une erreur relative de 24 % tandis que l’erreur relative est d’environ 40 % pour la région maritime. Les erreurs élevées dans la classe taïga ont été attribuées à des couverts de neige plus épais que la capacité de pénétration des micro-ondes tandis que les erreurs de la classe maritime a des fractions forêt élevées et à la neige mouillée. La présence d’importante quantité de neige et la forêt dense de la province de Québec compliquent l’estimation de I’EEN au Québec avec un modèle de régression. || Abstract: Snow water equivalent (SWE) measurements in the field allow estimation of the quantity of released water from the melting of snow. This is useful to predict the water reserve available for production of hydro-electricity. Remote sensing with microwave can estimate SWE and complement those observations synoptically for whole territories. A SWE mapping products was developed by NSIDC based on the AMSR-E sensor launched in 2002 with an improved resolution compared to previous sensors. SWE estimation is based on difference between a channel weakly affected (19 GHz) and a channel strongly affected by volume scattering. The precision of this product was evaluated for the province of Quebec in winter 2003 and winter 2004 with a mean SWE of 170 mm. Important underestimation and some difficulty of detecting the snow was revealed. Regional linear regression models were developed for the province of Quebec. Corrections for forest and water fraction were applied on T19V-37V combination and permit to improve the results. Those corrections were based on air temperature from the GEM model. Best results were found for taiga snow class in winter 2003 with a relative error of 28% and approximately 40% for maritime snow class. High errors in the taiga region were attributed to snow depth higher than the penetration depth of the microwave and errors in the maritime region to high forest density and wet snow. The important snow amount and high density forest of the province of Quebec hampers the estimation of SWE with a regression model.

The objective of this research is to develop a system capable of simulating snow depth and snow water equivalent in the Sherbrooke to Mount-Megantic area of Quebec's Eastern Townships using meteorological and digital terrain data as input.The working hypothesis is that meteorological data may drive a point energy and mass balance snow cover model.The model used was developed by the Hydrologic Research Lab (National Weather Service) which was calibrated for local conditions using field data collected during two winters at several sites on Mount-Megantic. Snow water equivalent and depth are used for calibration and validation of the model. Automated snow sensors were also used to obtain temperature calibration data.The snow surveys and correction of the air temperature for elevation improves the estimates of snow depth and water equivalent.The results suggest that data from the Sherbrooke meteorological stations can be used to estimate the snow cover over the area of Eastern Townships. Air temperature extrapolation across the field area is a challenge. However the simulated snow cover conforms generally well with data observed at several stations throughout the region.

The objective of this research is to explore the information content of repeat-pass cross-track Interferometric SAR (InSAR) with regard to snow, in particular Snow Water Equivalent (SWE) and snow depth. The study is an outgrowth of earlier snow cover modeling and radar interferometry experiments at Schefferville, Quebec, Canada and elsewhere which has shown that for reasons of loss of coherence repeat-pass InSAR is not useful for the purpose of snow cover mapping, even when used in differential InSAR mode. Repeat-pass cross-track InSAR would overcome this problem. As at radar wavelengths dry snow is transparent, the main reflection is at the snow/ground interface. The high refractive index of ice creates a phase delay which is linearly related to the water equivalent of the snow pack. When wet, the snow surface is the main reflector, and this enables measurement of snow depth. Algorithms are elaborated accordingly. Field experiments were conducted at two sites and employ two different types of digital elevation models (DEM) produced by means of cross track InSAR. One was from the Shuttle Radar Topography Mission digital elevation model (SRTM DEM), flown in February 2000. It was compared to the photogrammetrically produced Canadian Digital Elevation Model (CDEM) to examine snow-related effects at a site near Schefferville, where snow conditions are well known from half a century of snow and permafrost research. The second type of DEM was produced by means of airborne cross track InSAR (TOPSAR). Several missions were flown for this purpose in both summer and winter conditions during NASA's Cold Land Processes Experiment (CLPX) in Colorado, USA. Differences between these DEM's were compared to snow conditions that were well documented during the CLPX field campaigns. The results are not straightforward. As a result of automated correction routines employed in both SRTM and AIRSAR DEM extraction, the snow cover signal is contaminated. Fitting InSAR DEM's to known topography distorts the snow information, just as the snow cover distorts the topographic information. The analysis is therefore mostly qualitative, focusing on particular terrain situations. At Schefferville, where the SRTM was adjusted to known lake levels, the expected dry-snow signal is seen near such lakes. Mine pits and waste dumps not included in the CDEM are depicted and there is also a strong signal related to the spatial variations in SWE produced by wind redistribution of snow near lakes and on the alpine tundra. In Colorado, cross-sections across ploughed roads support the hypothesis that in dry snow the SWE is measurable by differential InSAR. They also support the hypothesis that snow depth may be measured when the snow cover is wet. Difference maps were also extracted for a 1 km2 Intensive Study Area (ISA) for which intensive ground truth was available. Initial comparison between estimated and observed snow properties yielded low correlations which improved after stratification of the data set.In conclusion, the study shows that snow-related signals are measurable. For operational applications satellite-borne cross-track InSAR would be necessary. The processing needs to be snow-specific with appropriate filtering routines to account for influences by terrain factors other than snow.

Soil water content (SWC) measurements are crucial worldwide for hydrological predictions, agricultural activities, and monitoring the progress of reclamation on disturbed land from industrial activities. In colder climates, snow water equivalent (SWE) measurements are equally important, and directly contribute to improved spring water supply forecasting. Both these variables, SWC and SWE, are commonly measured with either point-scale (e.g. soil cores for SWC and snow tubes for SWE) or large-scale (remote sensing) methods. The cosmic-ray soil moisture probe (CRP) was recently developed to fill this gap between small- and large-scale measurements. The CRP provides an average SWC reading in a landscape-scale measurement footprint (300 m radius) by taking advantage of the relationship between aboveground neutrons and soil water. Although the CRP has proved accurate in relatively homogenous sites, it has not been validated at highly heterogeneous sites. Since snow is simply frozen water, the CRP also has the potential for monitoring SWE at the landscape-scale. However, no calibration has been developed for measuring SWE with the CRP. This thesis aimed to further validate the use of a CRP for measuring SWC at a highly heterogeneous site, and calibrate a CRP for monitoring landscape-scale SWE at an agriculture field. The heterogeneous site used to validate the CRP for SWC measurement was an oil sand reclamation site made up of multiple test plots of varying soil layer treatments. Despite the clear differences in soil texture at the site, the CRP-monitored SWC compared accurately to sampled soil water content and a network of soil moisture probes. With the use of modeling, it was also possible to downscale the CRP measurement to the plot scale. For calibrating the CRP for monitoring SWE, an empirical calibration function was developed based on the relationship between the CRP-measured neutrons and SWE from snow surveys with snow tubes. Using the calibration equation, CRP-estimated SWE closely matched SWE measured from snow surveys. Differences were attributed to mid winter and spring melting of the snowpack along with varying soil water content in the top of the soil profile. This research demonstrates the usefulness of the CRP for monitoring SWC at unique sites and its ability to monitor SWE at the landscape-scale.

Effect of selected physical-geographical factors on the snow accumulation and snow melt Abstract: This master thesis analyzes the influence of physical-geographical factors on spatial distribution of snow water equivalent, and its evolution. In this work, emphasis is placed on describing the influence of vegetation, aspect and altitude. Measurement was carried out in experimental catchments Zlatý Brook and Bystřice River in western part of the Ore Mountains in winters 2008/2009, 2009/2010, 2010/2011 and 2011/2012. To evaluate the influence of these factors on value of snow water equivalent there was used one of the methods of multivariate statistical analysis - cluster analysis. The research shows that the greatest influence on the distribution and evolution of snow water equivalent in the experimental basins has vegetation and some dependency was proved also between the points of southern exposure. The measurement results demonstrate the suitability of cluster analysis for analyzing the data of point values of snow water equivalent. On the other hand the results showed the main limits of this method, especially the need for a large number of points with different characteristics. The results of measurements and statistical analysis are compared with results published in technical literature. Keywords: snow...

April 1st Snow Water Equivalent (SWE) reconstructions were generated using tree-ring chronologies for the Upper North Platte River Basin (UNPRB), located in north-central Colorado and south-eastern Wyoming. To regionalize April 1st snowpack data from 11 SNOw TELemetry stations (SNOTEL stations), Varimax Rotated Principal Components Analysis (PCA) was used. For the 11 station regionalization, the reconstruction explained 42% of the variance in the instrumental record and extended the record to 1378 (632 years). Retained tree-ring chronologies included those that were stable and positively correlated at 99% confidence levels or higher with the regional snowpack data for a 60–year overlapping period of record from 1940 to 1999. Stepwise Linear Regression was performed for the overlapping (calibration) period to develop regression models for the reconstructions. Eleven stations were individually reconstructed of which three stations (Dry Lake, Old Battle, and Lake Irene) explained variances greater than 40%. A contour plot of the R2 values for all 11 stations revealed that the more statistically skillful reconstructions were for stations spatially adjacent to the tree-ring chronologies used in the regression models. When the two individual stations with the lowest explained variance were removed from the 11 station snowpack regionalization, the new nine station regionalization reconstruction explained 45% of the variance over the same 632 year period.