Return to search

Compréhension du suivi de polymérisation d’un système réactif phénolique fortement dilué en présence d’une phase latex pour l'élaboration d’un adhésif sans formaldéhyde / Understanding of polymerization monitoring of a highly diluted phenolic reactive system in the presence of a latex phase for the preparation of a formaldehyde-free adhesive

Un nouveau système réactif de type phénolique plus respectueux de l’environnement, c’est-à-dire sans phénol, résorcinol ou formaldéhyde a été caractérisé lors de ces travaux de thèse. Ce système implique la copolymérisation du phloroglucinol et du téréphthalaldéhyde (TPA) en solution aqueuse très diluée. Dans un premier temps, une recherche bibliographique a permis de sélectionner les techniques expérimentales pertinentes pour suivre l’avancement de ces systèmes évolutifs complexes en solution. La combinaison d’analyses chromatographiques et spectroscopiques a été nécessaire pour la caractérisation de la partie soluble du système phloroglucinol-TPA. Un mécanisme de polymérisation conduisant à des espèces linéaires a été proposé pour des temps courts de réaction. L’augmentation de la fraction insoluble lors de la réaction dans les analyses nécessitant une étape de solubilisation met en évidence un second mécanisme de réaction des oligomères entre eux. Une méthode de suivi de l’état du système par mesures rhéologiques a été également développée pour le contrôle de production. Dans un deuxième temps, ce système a été utilisé pour la conception d’un adhésif Phloroglucinol-TPA-Latex. Celui-ci a été étudié à l’état liquide lors du ‘mûrissement’ et à l’état solide après réticulation sous la forme de films libres pour différentes situations modèles. La stabilité de l’adhésif lors du ‘mûrissement’ a été vérifiée même si des réactions de condensation au sein du système Phloroglucinol-TPA se poursuivent. Après réticulation, la morphologie à deux phases des films observée est spécifique à la nature de la phase latex. Il a été conclu que le nouveau système phloroglucinol-TPA a un comportement similaire à celui du système résorcinol-formaldéhyde en termes de mécanismes de réaction et lors de son utilisation en présence de latex. Celui-ci a donc la capacité de remplacer le système initial dans l’élaboration d’un nouvel adhésif plus respectueux de l’environnement. / A new phenolic-type reactive system more environment friendly, namely phenol-, resorcinol- or formaldehyde-free, was characterized during this Ph.D. This system consists in the copolymerization of Phloroglucinol and Terephthalaldehyde (TPA) in highly diluted water solution conditions. First, a literature study allowed a selection of relevant experimental technics in order to follow the advancement of these complex systems in solution. The combination of chromatographic and spectroscopic analyses is required to characterize the soluble part of the Phloroglucinol-TPA based system. A mechanism of reaction to synthesize linear oligomers was proposed for short reaction times. The increase of the non-soluble part during the reaction in the analyses made after a solubilization step leaded to the conclusion of another type of mechanism where the oligomers are involved. A monitoring method to follow the state of the system by rheological measurement was also developed for the production process. Secondly, this system was used in the preparation of an adhesive based on Phloroglucinol, TPA and Latex. This adhesive was studied in a liquid state during it ‘maturation’ and in a solid state after curing resulting in films from several model systems. The stability of the system during maturation was checked even if condensation reactions of the Phloroglucinol-TPA still took place. After curing, a two-phase morphology of the films was observed which was found to be specific to the nature of the latex phase. It was concluded that the new Phloroglucinol-TPA system has a similar behavior to the one of Resorcinol-Formaldehyde in terms of mechanism and use in presence of latex. It showed the capability to replace the initial system in the preparation of a new adhesive more environment friendly.

Identiferoai:union.ndltd.org:theses.fr/2019LYSEI043
Date12 July 2019
CreatorsDentzer, Laetitia
ContributorsLyon, Duchet-Rumeau, Jannick
Source SetsDépôt national des thèses électroniques françaises
LanguageFrench
Detected LanguageFrench
TypeElectronic Thesis or Dissertation, Text

Page generated in 0.0123 seconds