Return to search

Physics-informed Neural Networks for Biopharma Applications

Physics-Informed Neural Networks (PINNs) are hybrid models that incorporate differential equations into the training of neural networks, with the aim of bringing the best of both worlds. This project used a mathematical model describing a Continuous Stirred-Tank Reactor (CSTR), to test two possible applications of PINNs. The first type of PINN was trained to predict an unknown reaction rate law, based only on the differential equation and a time series of the reactor state. The resulting model was used inside a multi-step solver to simulate the system state over time. The results showed that the PINN could accurately model the behaviour of the missing physics also for new initial conditions. However, the model suffered from extrapolation error when tested on a larger reactor, with a much lower reaction rate. Comparisons between using a numerical derivative or automatic differentiation in the loss equation, indicated that the latter had a higher robustness to noise. Thus, it is likely the best choice for real applications. A second type of PINN was trained to forecast the system state one-step-ahead based on previous states and other known model parameters. An ordinary feed-forward neural network with an equal architecture was used as baseline. The second type of PINN did not outperform the baseline network. Further studies are needed to conclude if or when physics-informed loss should be used in autoregressive applications.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-185423
Date January 2021
CreatorsCedergren, Linnéa
PublisherUmeå universitet, Institutionen för fysik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0022 seconds