Bearing layers are used in road and building constructions as underlying soil layers to provide stability and support to the top layer that takes up the load. A normal bearing layer contains different amounts of materials such as stone, gravel, and filler. That mixture of materials contains a large amount of filler to give the product tightness and stability. Draining bearing layers usually contain less filler than ordinary bearing layers, because their purpose is to improve the drainage properties and reduce the risk of damage due to water collection.This thesis work took place at NCC's quarries in Sälgsjö and Hammarby. At NCC's rock quarry, there already is a standard bearing layer with a grain size of 0/32 and a filler content of approximately 4–5%. In this degree project, a production process has been created to obtain a drain bearing layer where the filler content is reduced to approximately 2–3%. The requirement for a draining carrier layer is 2–3% filler content and this requirement has been followed in this production process. The draining bearing layer has been produced based on a standard product with the same grain size.There are practical limitations in how the operations work and what capabilities are required. Moisture in the material has also been a limitation. In this project, work is done with freshly crushed material, which has a relatively low moisture content (1–2%). A vibration-free screen like the function of the harp has been designed and built. Then the standard product was run through the harp at different gradients and the new product was analyzed in the lab to see what filler content was achieved. A simulation test was performed using a FEM design program called Digiroad at Chalmers University of Technology in Gothenburg.The results demonstrate that the utilization of the developed models of harp screens reduces the proportion of filler in the material. Additionally, the conducted harp screen analyses confirm that the designed harp screens are effective in transforming a standard bearing layer into a draining bearing layer, which helps to prevent water accumulation under roads or buildings and thus reduces the risk of damage and problems. The efficient production process for producing draining bearing layers can be of great importance to ensure a sustainable and safe infrastructure.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hig-42577 |
| Date | January 2023 |
| Creators | Abu Sulaiman, Iyad, Ibrahim, Miran |
| Publisher | Högskolan i Gävle, Avdelningen för byggnadsteknik, energisystem och miljövetenskap |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0016 seconds