Back to search

University of South Florida

Mechanical Properties of Particulate-Reinforced Boron Carbide Composites

Abstract

dc:description

The mechanical properties of boron carbide (B4C) with 10 and 20 vol% particulate inclusions of commercially available nano-sized alpha-phase silicon carbide (a-SiC) or micron-sized titanium diboride (TiB2) were investigated so as to produce a fine-grained material with high hardness, toughness, and overall strength in order to increase the effectiveness of B4C as a structural ceramic, whose use in the field has been limited because of the extreme brittle nature of the material. Full density sintering of the ceramics (≥99% theoretical) was completed using the novel Plasma Pressure Compaction (P²C®) technique, which limited grain growth due to a reduced processing temperature and a significantly reduced consolidation time. The reinforced ceramic composites had particulate grains homogeneously distributed within the B4C matrix. X-ray diffraction patterns confirmed that the constituents did not interdiffuse. The four-point flexure strength for the monolithic B4C ceramic was found to be significantly larger than any recorded value found in scientific literature, and was most likely attributed to the fine-grained microstructure resulting from the P²C® processing. The mechanical properties of the nano-sized a-SiC-B4C ceramics showed a slight increase in the Chevron-notched four-point bend fracture toughness due to the crack deflection toughening mechanism. A slight decrease in the Vickers microhardness and the static elastic modulus values were also observed. A significant increase in the fracture toughness as well as a slight increase in the microhardness and elastic modulus of the micron-sized TiB2-B4C materials was found. The toughening mechanism of this composite was attributed to the slight chemical bond between the B4C matrix and the ultra-small, ultra-tough TiB2 particulates, which forced a propagating crack to completely rip apart the TiB2 reinforcing particles. This cleaving nature resulted in significant amounts of energy being absorbed by the micron-sized particulates. It was concluded that the composite with 20 vol% TiB2 allowed for the largest gain in toughness because it possessed the largest number of ultra small, ultra tough particulate-cracktip interactions.

Degree

thesis:*
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor
University of South Florida
Year dc:date
2008

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hankla, Lorenzo W
Contributors dc:contributor
  • Ashok Kumar, Ph.D.
  • Nathan Crane, Ph.D.
  • Muhammad Rahman, Ph.D.
  • Makoto Hirai, Ph.D.
  • Ramachandran Radhakrishnan, Ph.D.

Subjects

dc:subject × 14

Rights

Language dc:language
EN-US

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/278

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Hankla, Lorenzo W. Mechanical Properties of Particulate-Reinforced Boron Carbide Composites. Thesis thesis, University of South Florida, 2008. https://digitalcommons.usf.edu/etd/278