No description available.

No description available.

No description available.

This dissertation covers several issues related to the ac-dc bus-interface bi-directional converters in renewable energy systems. The dissertation explores a dc-electronic distribution system for residential and commercial applications with a focus on the design of an ac-dc bi-directional converter for such application. This converter is named as the "Energy Control Center" due to its unique role in the system. First, the impact of the unbalanced power from the ac grid, especially the single-phase grid, on the dc system operation is analyzed. Then, a simple ac-dc two-stage topology and an advanced digital control system is proposed with a detailed design procedure. The proposed converter system significantly reduces the dc-link capacitor volume and achieves a dynamics-decoupling operation between the interfaced systems. The total volume of the two-stage topology can be reduced by upto three times compared with the typical design of a full-bridge converter. In addition, film capacitors can be used instead of electrolytic capacitors in the system, and thus the whole system reliability is improved. A set of ac passive plus active filter solutions is proposed for the ac-dc bus-interface converter which significantly reduces the total power filter volume but still eliminate the total leakage current and the common-mode conducted EMI noises by more than 90%. The dc-side low-frequency CM voltage ripple generated by the unbalanced ac voltages can be eliminated as well. The proposed solution features a high reliability and fits three types of the prevalent low-voltage ac distribution systems. Grid synchronization, a critical interface control in ac-dc bus-interface converters, is discussed in detail. First, a novel single-phase grid synchronization solution is proposed to achieve the rejection of multiple noises as well as the capability to track the ac voltage amplitude. Then, a comprehensive modeling methodology of the grid synchronization for three-phase system is proposed to explain the output frequency behaviors of grid-interface power converters at the weak grid, at the islanded condition, and at the multi-converter condition. The proposed models provide a strong tool to predict the grid synchronization instabilities raised from industries under many operating conditions, which is critical in future more-distributed-generation power systems. Islanding detection issues in ac-dc bus-interface converters are discussed in detail. More than five frequency-based islanding detection algorithms are proposed. These solutions achieve different performances and are suitable for different applications, which are advantageous over existing solutions. More importantly, the detailed modeling, trade-off analysis, and design procedures are given to help completely understand the principles. In the end, the effectiveness of the proposed solutions in a multiple-converter system are analyzed. The results drawn from the discussion can help engineers to evaluate other existing solutions as well. / Ph. D.

Recent research into industrial applications of electric power conversion shows an increase in the use of renewable energy sources and an increase in the need for electric power by the loads. The Medium-Voltage DC (MVDC) concept can be an optimal solution. On the other hand, the Modular Multilevel Converter (MMC) is an attractive converter topology choice, as it has advantages such as excellent harmonic performance, distributed energy storage, and near ideal current and voltage scalability. The fault response, on the other hand, is a big challenge for the MVDC distribution systems and the traditional MMCs with the Half-Bridge submodule configuration, especially when a DC short circuit fault happens. In this study, the fault current behavior is analyzed. An alternative submodule topology and a fault operation control are explored to achieve the fault current limiting capability of the converter. A three-phase SiC-based MMC prototype with the Full-Bridge configuration is designed and built. The SiC devices can be readily adopted to take advantage of the wide-bandgap devices in MVDC applications. The Full-Bridge configuration provides additional control and energy storage capabilities. The full in-depth design, controls, and testing of the MMC prototype are presented, including among others: component selection, control algorithms, control hardware implementation, pre-charge and discharge circuits, and protection scheme. Systematical tests are conducted to verify the function of the converter. The fault current behavior and the performance of the proposed control are verified by both simulation and experiment. Fast fault current clearing and fault ride-through capability are achieved. / Master of Science

Water distribution systems are critical infrastructure systems enabling the social and economic welfare of a community. While normal failures are expected and repaired quickly, low-probability and high consequence disruptive events have potential to cause severe damage to the infrastructure and significantly reduce their performance or even stop their function altogether. Resilient infrastructure is a necessary component towards achieving resilient and sustainable communities. Resilience concepts allow improved decision making in relation with risk assessment and management in water utilities. However, in order to operationalize infrastructure resilience concepts, it is fundamental to develop practical resilience assessment methods such as the methodology and tool proposed in this research, named Effective Resilience Assessment Methodology for Utilities (ERASMUS). ERASMUS utilizes a stochastic simulation model to evaluate the probability of resilient response from a water distribution system in case of disruption. This methodology utilizes a parametric concept of resilience, in which a resilient infrastructure system is defined in terms of a set of performance parameters compared with their socially acceptable values under a variety of disruptive events. The methodology is applied to two actual water distribution networks in the East and West coasts of the US. / Ph. D.

As demand for alternative water sources intensifies, increased use of reclaimed water is important to help achieve water sustainability. In addition to treatment, the manner in which reclaimed water is distributed is a key consideration as it governs the water quality at the point of use. In this work, simulated reclaimed water distribution systems (SRWDSs) were operated for more than two years to examine the role of system design, biofiltration, residual disinfectant type (i.e., chlorine, chloramine, no residual) and temperature on important aspects of chemistry and microbial regrowth under laboratory-controlled conditions. Turbidity decreased to 0.78 NTU after biofiltration and chlorinated treatments from 10.0-12.6 NTU for conditions with chloramine and no residuals. SRWDSs were susceptible to sediment accumulation, which occupied 0.83-3.2% of the volume of the first pipe segment (1 day of hydraulic residence time), compared to 0.32-0.45% volume in the corresponding chlorinated SRWDSs. The mass of accumulated sediment positively correlated (R2 = 0.82) with influent turbidity. Contrary to experiences with potable water systems, chlorine was found to be more persistent and better at maintaining biological stability in the SRWDSs than chloramine, especially at the higher temperatures >22°C common to many water scarce regions. The severe nitrification at the warmer temperatures rapidly depleted chloramine residuals, decreased dissolved oxygen, and caused elevated levels of nitrifiers and heterotrophic cell counts. A metagenomic taxonomic survey revealed high levels of gene markers of nitrifiers in the biofilm samples at 22°C for the chloraminated system. Non-metric multidimensional scaling analysis confirmed distinct taxonomic and functional microbial profiles between the chlorine and chloramine SRWDSs. Reflecting on multiyear experiences operating two different SRWDSs reactor designs, including thin tubes (0.32-cm diameter) and pipe reactors (10.2-cm), illustrated strengths and weaknesses of both approaches in recreating key aspects of biochemical changes in reclaimed water distribution systems. It is clear that approaches deemed successful with drinking water distribution systems may not always directly transfer to simulating reclaimed distribution systems, or to proactively managing full-scale reclaimed systems that have long periods of stagnation and where minimally-treated wastewater with high levels of nutrients and turbidity are used. / Doctor of Philosophy / Increasing water scarcity is creating an impetus for creating more sustainable water supplies. Wastewater effluent is increasingly viewed as in important resource that can reduce both water and energy demand. Reclaiming moderately to minimally-treated secondary wastewater effluent for non-potable reuse (NPR) applications; such as agricultural irrigation, landscaping, and toilet flushing, helps reduce demand for higher quality potable water sources. NPR presently accounts for more than 50% of total reuse and is projected to become increasingly important. While NPR is attractive, important knowledge gaps remain in terms of managing water quality and safety as it is transported through distribution pipes to the point of use. A comprehensive literature review revealed that NPR distribution systems are distinct from conventional drinking water distribution systems (DWDSs) and that it is doubtful if our current understanding of DWDSs would directly transfer to NPR systems. Unlike drinking water systems, NPR systems are currently unregulated at the national level and corresponding state-to-state regulations vary widely. The levels of water treatment can vary from simply distributing untreated effluent from wastewater treatment plants to very high-level treatment with membranes that produces water of equal or even higher quality than many existing tap waters. A common treatment train for minimally-treated NPR involves biologically activated carbon (BAC) filtration and the use of disinfectants (e.g., chlorine or chloramine) to control microbial water quality to the point of use. Prior studies from DWDSs have demonstrated water quality degradation in terms of disinfectant loss, bacterial growth, and aesthetic problems, with the settling of trace particulate matter producing sediment within pipe distribution systems. In particular, accumulated sediment can become a hotspot for water quality deterioration. Considering that minimally-treated reclaimed water can have much higher levels of particulate matter and nutrients than drinking water, it was predicted that NPR distribution systems could suffer from faster water quality degradation than corresponding drinking water systems, especially at the warmer temperatures common in water-scarce regions. This work was the first multi-year attempt to examine the effects of disinfectant (i.e. free chlorine, chloramine, no residual), BAC filtration versus no filtration, water age (up to 5-d versus 28-min), and temperature (14°C, 22°C, 30°C) in different types of lab-scale reactors. Two simulated reclaimed water distribution systems (SRWDSs) including 4-in. diameter Pipe SRWDSs versus 1/8-in. diameter Tube SRWDSs, were designed to study key aspects of full-scale NPR systems and were operated for more than two years to study chemical and microbial changes as distributed water traveled through the two systems. The Pipe SRWDSs were designed to assess the impacts on final water quality after long-term operation that allowed sediment to slowly accumulate, whereas the complementary Tube SRWDS design did not allow sediment to accumulate and only held the water for 28 minutes. Water was sampled regularly to track the trends of key water quality parameters, including disinfectant residuals, dissolved oxygen, nitrogen compounds involved in nitrification reactions, and various types of bacteria of interest. Sequencing of the biological genetic materials on selected samples was conducted to understand the types of bacteria present and their functions under the different circumstances. High levels of sediment were found to accumulate near the beginning of the Pipe SRWDSs, which caused loss of oxygen and disinfectants at the bottom of the pipes. Chlorine was more persistent and better at preventing bacteria growth as water traveled through the distribution system. In contrast, a type of bacteria that used ammonia as a nutrient (i.e., nitrifying bacteria) were observed in the pipes with chloramine (i.e., ammonia plus chlorine) as the disinfectant. The nitrifying bacteria caused rapid depletion of chloramine residuals, especially at temperatures above 22°C. At 30°C both chlorine and chloramine were almost immediately consumed in the pipe reactors. Nitrification is known to trigger water quality problems in chloraminated DWDSs, and we expect that chloraminated RWDSs would be even more susceptible to nitrification and associated water quality degradation issues in Compare the Tube SRWDSs to the Pipe SRWDSs, aside from heavy accumulations of sediment in the pipes versus no sediment in the thin tubes, the tubes clogged repeatedly from formation of thick biofoulants in the systems treated with no disinfectant and chloramine, whereas they remained relatively free of biofoulants and clogging in the tubes with chlorine. Even in just 28 minutes, it took water to move from the start to the end of the tube, both chlorine and chloramine were almost completely consumed in the tubes, due to the unrealistically high pipe surface area to the small flow volume inherent to this reactor design. As NPR becomes increasingly common to help achieve water sustainability, it will be important to deploy laboratory simulations, that are capable of testing and revealing key chemical and microbial processes that affect the operation of these systems and water safety at the point of use. The insights from this first long-term effort of simulating RWDSs highlight some unique characteristics and challenges of RWDSs, and reveals key concepts to help guide future research.

The thesis addresses electronic power distribution systems for the residential applications. Presented are both, renewable energy ac-nanogrid system along with the vehicle-to-grid technology implementation, and envisioned structure and operation of dc-nanogrid addressing all system components chosen as an inherent part of the future electrical architecture. The large-scale model is built and tested in the laboratory environment covering a few operational modes of the ac-nanogrid, while later in the thesis is shown how dc bus signaling technique could be contemplated for the energy management of the renewable energy sources and their maximal utilization. Thesis however puts more focus on the dc-nanogrid system to explore its benefits and advantages for the electrical systems of the future homes that can easily impact not only residential, but also microgrid, grid and intergrid levels. Thus, presented is low frequency terminal behavioral modeling of the system components in dc-nanogrid motivated by the fact that system engineers working on the system-level design rarely have access to all the information required to model converters and system components, other than specification and data given in the datasheets. Using terminal behavioral modeling, converters are measured on-line and their low frequency dynamics is identified by the means of the four transfer functions characteristically used in two port network models. This approach could significantly improve system-level design and simulations. In addition to previously mentioned, thesis addresses terminal behavioral modeling of dc-dc converters with non-linear static behavior showing hybrid behavioral models based on the Hammerstein approach. / Master of Science

Orientador: Rubén Augusto Romero Lázaro / Resumo: A grande maioria dos sistemas de distribuição de energia elétrica opera de forma radial. Isso significa que cada carga é alimentada por apenas uma subestação por meio de um único caminho. Entretanto, as redes de distribuição apresentam estrutura malhada, de forma que, caso uma contingência ocorra, o restabelecimento do fornecimento possa ser realizado para o maior número possível de consumidores. Os trabalhos que lidam com o problema de planejamento da expansão de sistemas de distribuição, no entanto, geralmente consideram a expansão do sistema para apenas uma topologia radial, sem levar em conta aspectos da restauração do fornecimento para melhoria dos índices de confiabilidade. Nesse contexto, este trabalho aborda o planejamento de sistemas de distribuição considerando aspectos econômicos e de confiabilidade, de forma a incluir a restauração do fornecimento no problema de planejamento da expansão. Na formulação do problema considera-se a expansão de novas subestações, o reforço de subestações existentes, a construção de novos alimentadores em novos caminhos, a troca de condutores existentes e a alocação de geradores distribuídos, além de expansão multiestágio e restauração do fornecimento para melhoria dos índices de confiabilidade. Dois métodos alternativos são propostos para resolver o problema descrito: o primeiro considera modelos matemáticos com diversos graus de precisão, para serem resolvidos por métodos exatos, e o segundo é uma meta-heurística de busca e vizinhança... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The vast majority of electricity distribution systems are operated radially. This means that each load is supplied by only one substation through a single path. However, distribution networks have a meshed structure so that, in the case of a contingency, the supply is restored to as many customers as possible. The works that deal with the distribution systems expansion planning problem, however, generally consider the expansion of the system for only one radial topology, disregarding the restoration aspects to improve reliability indices. In this context, this work deals with the planning of distribution systems considering economic and reliability aspects, to include the service restoration in the planning problem. In the formulation of the problem, it is considered the expansion of new substations, the reinforcement of existing substations, the construction of new feeders in new paths, the exchange of existing conductors, and the allocation of distribution generation, besides multistage expansion and service restoration to improve the reliability indices of the system. Two alternative methods are proposed to solve the described problem: the first one considers relaxed or approximated mathematical models to be solved by exact methods, and the second one is a variable neighborhood search metaheuristic, which solves the complete model for the problem approximately, without guarantee of optimality. The initial solution of the metaheuristic is generated by a strategy that constr... (Complete abstract click electronic access below) / Doutor

Problemas ocasionados por perturbações na qualidade da energia elétrica (QEE) podem provocar sérios prejuízos, tanto de cunho social, quanto financeiros, aos clientes conectados ao sistema elétrico de potência como um todo. Neste contexto, os clientes que mais sofrem são os clientes industriais, pois estes possuem cargas sensíveis a vários distúrbios associados à falta da QEE. Sendo assim, para adoções de medidas preventivas, ou corretivas, que melhorem os índices de QEE, faz-se necessário um monitoramento dos sistemas elétricos que permita um melhor acompanhamento da ocorrência dos distúrbios. Nesta pesquisa é proposta a modelagem do problema de alocação ótima de monitores de QEE em sistemas de distribuição com múltiplos objetivos, os quais são: minimização do custo do monitoramento, minimização da ambiguidade topológica, maximização do monitoramento das cargas, maximização da quantidade de ramais monitorados, minimização da quantidade de afundamentos não monitorados, e maximização da redundância do monitoramento dos afundamentos. Na resolução do problema foi utilizado o Algoritmo Evolutivo Multiobjetivo com Tabelas (AEMT), adotado por ter boa capacidade de resolução com muitos objetivos. Os resultados obtidos permitiram observar que o AEMT forneceu as fronteiras de Pareto com soluções diversificadas e bem distribuídas ao longo da mesma, mostrando-se de grande relevância para o planejamento de sistemas de monitoramento da QEE em sistemas de distribuição de energia. A principal contribuição desta tese é o fornecimento de um modelo que permite às empresas de energia avaliar os investimentos que farão nos seus sistemas de monitoramento considerando seis critérios distintos, permitindo uma maior flexibilidade no estabelecimento do plano de monitoramento e uma melhor análise do custo/benefício considerando os seis aspectos abordados. / Problems arising from disturbances in power quality (PQ) can cause serious damage, both social, and financial, to customers connected to the electrical power distribution systems as a whole. In this context, the customers who suer most are industrial customers, as they have loads sensitive to various disturbances associated with the lack of PQ. Thus, in order to adopt preventive or corrective measures to improve PQ rates, it is necessary to monitor electrical systems to allow better oversight of the occurrence of disturbances. In this research, the proposal is to model the problem of optimal allocation of power quality monitors in distribution systems with multiple objectives. The multiple objectives are: minimizing the monitoring cost, minimizing ambiguities in topology, maximizing the load monitoring, maximizing the area monitoring, minimizing the voltage sag unmonitored, and maximizing the redundancy in the sag monitoring. In solving the problem, a Multiobjective Evolutionary Algorithm with Tables (MEAT) was adopted due to ability to deal with many objectives. The results show that the AMET finds a set of ecient solutions that are diversified and well-distributed along the Pareto Front, and that they are highly relevant for planning of PQ monitoring systems in electrical power distribution systems. The main contribution of this thesis is to provide a model that allows utilities better evaluate investments that they will make in their monitoring systems comprising six dierent criteria, allowing greater flexibility in establishing the monitoring plan and a better analysis of cost/benefit considering the six aspects.