The choice of the topic addressed in this thesis aims to improve the service and maintenance on ceramic ball bearings in a specific test dynamometer and through an engineering approach develop tools for condition monitoring. The company connected to this thesis, AVL, is the world's largest privately owned company for development, simulation and testing technology of powertrains for passenger cars, trucks and large engines. Engine testing is a critical part of the business at AVL Sweden and unexpected bearing failure can result in long repair times and great economic losses due to loss of the testing time. In short terms, the methodological approach followed the following steps; first a thorough information retrieval regarding bearings and analysis was conducted. The search was deepened around areas such as hybrid ball bearings, bearing failure mechanisms, bearing defect frequencies, signal analysis and condition monitoring. After this a table for bearing damage detection was developed and a “step by step” guidance for condition monitoring. The tools where afterwards verified by simple testing to detect complications within the chosen system. The existing condition monitoring system that is used today revealed weaknesses as it lacked the feature of taking preventive measures. The system that is based on temperature measurements isn’t satisfactory enough, especially when it’s missing visual clarity. Service and maintenance according to specifications from the manufacturer should be scheduled to ensure operational and guarantees. Currently mounted accelerometers on the housing of the Dynas3 engine should be connected for collecting data and the total sum of energy should be calculated for simple monitoring of historical progression. This should be done by following the guidance in order to ensure proper data acquisition. The best way to implement condition monitoring showed to be by performing multi-parameter monitoring. The design of the condition monitoring system is highly connected to what to monitor and at what stage. One main consideration to keep in mind is that it’s very rare that manufacturing defects are the reason for bearing failure. Instead it derives from improper storage, transport, handling or dimensional errors and even in some cases by improperly implemented force analysis prior to bearing selection. / Huvudämnet som behandlas i detta examensarbete syftar till att förbättra service och underhåll på keramiska kullager i en viss testdynamometer och genom ett ingenjörsmässigt tillvägagångsätt utveckla verktyg för tillståndsövervakning. Företaget som är ansluten till detta examensarbete är AVL som är världens största privatägda företag för utveckling, simulering och testteknik för drivlinor för personbilar, lastbilar och stora motorer. Motorprovning är en viktig del av verksamheten vid AVL Sverige, och ett oväntat lagerhaveri kan leda till långa reparationstider och stora ekonomiska förluster på grund av utebliven test tid. I korta termer följde den metod som använts följande steg, först genomfördes en grundlig informationssökning om lager och tillhörande analyser. Efter det fördjupades sökande kring områden som hybrida kullager, lagerskademekanismer, frekvenser kopplade till lagerskador, signalanalys och tillståndsövervakning. Efter detta framställdes en tabell för detektering av lagerskador, samt en ”steg för steg” guide för tillståndsövervakning. Verktygen för tillståndsövervakning kontrolleras efteråt, genom att enkla tester genomfördes för att upptäcka komplikationer inom det valda systemet. Det övervakningssystem som används idag avslöjade svagheter genom att sakna funktionen att vidta förebyggande åtgärder. System som är baserat på temperaturmätningar är inte tillräckligt tillfredsställande, speciellt när det saknar en visuell tydlighet. Den service och underhåll som enligt tillverkarens föreskrifter påvisas bör planeras för att säkerställa drift och garantier. Nuvarande monterade accelerometrar fästa vid motorhöljet bör anslutas för att insamla data, och den totala summan av energin bör beräknas för en enkel övervakning av det historiska utvecklingsförloppet. Detta bör göras genom att följa de riktlinjer som framställts för att säkerställa korrekt datainsamling. Det bäst passande sättet att genomföra tillståndsövervakning på i detta fall visade sig vara att utföra multiparameterövervakning. Framställningen av tillståndsövervakningssystemet är starkt förknippat med vad som skall övervakas och i vilket skede. En huvudsaklig bidragande faktor att komma ihåg är att det är mycket ovanligt att fabrikationsfel är orsaken till lagerhaveri. Istället härstammar haveriet från felaktig förvaring, transportering, hantering eller dimensioneringsfel och i vissa fall av felaktigt genomförd kraftanalys inför lagerval.

International Telemetering Conference Proceedings / October 21, 2002 / Town & Country Hotel and Conference Center, San Diego, California / Because modern data acquisition systems use digital backplanes, it is logical for more and more data processing to be done in each Data Acquisition Unit (DAU) or even in each module. The processing related to an analog acquisition module typically takes the form of digital signal conditioning for range adjust, linearization and filtering. Some of the advantages of this are discussed in this paper. The next stage is powerful processing boards within DAUs for data reduction and third-party algorithm development. Once data is being written to and from powerful processing modules an obvious next step is networking and decom-less access to data. This paper discusses some of the issues related to these types of processing.

Ljudigenkänning möjliggörs genom spektralanalys, som beräknas av den snabba fouriertransformen (FFT), och har under senare år nått stora genombrott i samband med ökningen av datorprestanda och artificiell intelligens. Tekniken är nu allmänt förekommande, i synnerhet inom bioakustik för identifiering av djurarter, en viktig del av miljöövervakning. Det är fortfarande ett växande vetenskapsområde och särskilt igenkänning av fågelsång som återstår som en svårlöst utmaning. Även de främsta algoritmer i området är långt ifrån felfria. I detta kandidatexamensarbete implementerades och utvärderades enkla algoritmer för att para ihop ljud med en ljuddatabas. En filtreringsmetod utvecklades för att urskilja de karaktäristiska frekvenserna vid fem tidsramar som utgjorde basen för jämförelsen och proceduren för ihopparning. Ljuden som användes var förinspelad fågelsång (koltrast, näktergal, kråka och fiskmås) så väl som egeninspelad mänsklig röst (4 unga svenska män). Våra resultat visar att framgångsgraden normalt är 50–70%, den lägsta var fiskmåsen med 30% för en liten databas och den högsta var koltrasten med 90% för en stor databas. Rösterna var svårare för algoritmen att särskilja, men de hade överlag framgångsgrader mellan 50% och 80%. Dock gav en ökning av databasstorleken generellt inte en ökning av framgångsgraden. Sammanfattningsvis visar detta kandidatexamensarbete konceptbeviset bakom fågelsångigenkänning och illustrerar såväl styrkorna som bristerna av dessa enkla algoritmer som har utvecklats. Algoritmerna gav högre framgångsgrad än slumpen (25%) men det finns ändå utrymme för förbättring eftersom algoritmen vilseleddes av ljud av samma frekvenser. Ytterligare studier behövs för att bedöma den utvecklade algoritmens förmåga att identifiera ännu fler fåglar och röster. / Sound recognition is made possible through spectral analysis, computed by the fast Fourier transform (FFT), and has in recent years made major breakthroughs along with the rise of computational power and artificial intelligence. The technology is now used ubiquitously and in particular in the field of bioacoustics for identification of animal species, an important task for wildlife monitoring. It is still a growing field of science and especially the recognition of bird song which remains a hard-solved challenge. Even state-of-the-art algorithms are far from error-free. In this thesis, simple algorithms to match sounds to a sound database were implemented and assessed. A filtering method was developed to pick out characteristic frequencies at five time frames which were the basis for comparison and the matching procedure. The sounds used were pre-recorded bird songs (blackbird, nightingale, crow and seagull) as well as human voices (4 young Swedish males) that we recorded. Our findings show success rates typically at 50–70%, the lowest being the seagull of 30% for a small database and the highest being the blackbird at 90% for a large database. The voices were more difficult for the algorithms to distinguish, but they still had an overall success rate between 50% and 80%. Furthermore, increasing the database size did not improve success rates in general. In conclusion, this thesis shows the proof of concept and illustrates both the strengths as well as short-comings of the simple algorithms developed. The algorithms gave better success rates than pure chance of 25% but there is room for improvement since the algorithms were easily misled by sounds of the same frequencies. Further research will be needed to assess the devised algorithms' ability to identify even more birds and voices.

Speech has been the subject of interest for a very long time. Even with so much advancement in the processing techniques and in the understanding of the source of speech, it is, even today, rather difficult to generate speech in the laboratory in all its aspects. A simple aspect like how the speech can retain its intelligibility even if it is distorted or band passed is not really understood. This thesis deals with one small feature of speech viz., the intelligibility of speech is retained even when it is bandpassed with a minimum bandwidth of around 1 KHz located any where on the speech spectrum of 0-4 KHz. Several experiments have been conducted by the earlier workers by passing speech through various distortors like differentiators, integrators and infinite peak clippers and it is found that the intelligibility is retained to a very large extent in the distorted speech. The integrator and the differentiator remove essentially a certain portion of the spectrum. Therefore, it is thought that the intelligibility of the speech is spread over the entire speech spectrum and that, the intelligibility of speech may not be impaired even when it is bandpassed with a minimum bandwidth and the band may be located any where in the speech spectrum. To test this idea and establish this feature if it exists, preliminary experiments have been conducted by passing the speech through different filters and it is found that the conjecture seems to be on the right line. To carry out systematic experiments on this an experimental set up has been designed and fabricated which consists of a microprocessor controlled speech recording, storing and speech playback system. Also, a personal computer is coupled to the microprocessor system to enable the storage and processing of the data. Thirty persons drawn from different walks of life like teachers, mechanics and students have been involved for collecting the samples and for recognition of the information of the processed speech. Even though the sentences like 'This is devices lab' are used to ascertain the effect of bandwidth on the intelligibility, for the purpose of analysis, vowels are used as the speech samples. The experiments essentially consist of recording words and sentences spoken by the 30 participants and these recorded speech samples are passed through different filters with different bandwidths and central frequencies. The filtered output is played back to the various listeners and observations regarding the intelligibility of the speech are noted. The listeners do not have any prior information about the content of the speech. It has been found that in almost all (95%) cases, the messages or words are intelligible for most of the listeners when the band width of the filter is about 1 KHz and this is independent of the location of the pass band in the spectrum of 0-4 KHz. To understand how this feature of speech arises, spectrums of vowels spoken by 30 people have using FFT algorithms on the digitized samples of the speech. It is felt that there is a cyclic behavior of the spectrum in all the samples. To make sure that the periodicity is present and also to arrive at the periodicity, a moving average procedure is employed to smoothen the spectrum. The smoothened spectrums of all the vowels indeed show a periodicity of about 1 KHz. When the periodicities are analysed the average value of the periodicities has been found to be 1038 Hz with a standard deviation of 19 Hz. In view of this it is thought that the acoustic source responsible for speech must have generated this periodic spectrum, which might have been modified periodically to imprint the intelligibility. If this is true, one can perhaps easily understand this feature of the speech viz., the intelligibility is retained in a bandpassed speech of bandwidth 1 K H z . the pass band located any where in the speech spectrum of 0-4 KHz. This thesis describing the experiments and the analysis of the speech has been presented in 5 chapters. Chapter 1 deals with the basics of speech and the processing tools used to analyse the speech signal. Chapter 2 presents the literature survey from where the present problem is tracked down. Chapter 3 describes the details of the structure and the fabrication of the experimental setup that has been used. In chapter 4, the detailed account of the way in which the experiments are conducted and the way in which the speech is analysed is given. In conclusion in chapter 5, the work is summarised and the future work needed to establish the mechanism of speech responsible for the feature of speech described in this thesis is suggested.

<p>Fluid simulating is one of the most difficult problems in computer graphics. On the other hand, water appears in our life very frequently. This thesis focuses on water simulating. We have two main methods to do this in the thesis: the first is wave based water simulating; Sine wave summing based and Fast Fourier Transform based methods are all belong to this part. The other one is physics based water simulating. We make it based on Navier-Stokes Equation and it is the most realistic animation of water. It can deal with the boundary and spray which other method cannot express. Then we put our emphasis on implement by the physics method using Navier-Stokes Equation.</p>

This research focuses on a novel integrated approach for computing and representing complex numbers as a single entity without the use of any dedicated multiplier for calculating the fast Fourier transform algorithm (FFT), using the Distributed Arithmetic (DA) technique and Complex Binary Number Systems (CBNS). The FFT algorithm is one of the most used and implemented technique employed in many Digital Signal Processing (DSP) applications in the field of science, engineering, and mathematics. The DA approach is a technique that is used to compute the inner dot product between two vectors without the use of any dedicated multipliers. These dedicated multipliers are fast but they consume a large amount of hardware and are quite costly. The DA multiplier process is accomplished by shifting and adding only without the need of any dedicated multiplier. In today's technology, complex numbers are computed using the divide and conquer approach in which complex numbers are divided into two parts: the real and imaginary. The CBNS technique however, allows for each complex addition and multiplication to be computed in one single step instead of two. With the combined DA-CBNS approach for computing the FFT algorithm, those dedicated multipliers are being replaced with a DA system that utilize a Rom-based memory for storing the twiddle factor 'wn' value and the complex arithmetic operations being represented as a single entity, not two, with the CBNS approach. This architectural design was implemented by coding in a very high speed integrated circuit (VHSIC) hardware description language (VHDL) using Xilinx ISE design suite software program version 14.2. This computer aided tool allows for the design to be synthesized to a logic gate level in order to be further implemented onto a Field Programmable Gate Array (FPGA) device. The VHDL code used to build this architecture was downloaded on a Nexys 4 DDR Artix-7 FPGA board for further testing and analysis. This novel technique resulted in the use of no dedicated multipliers and required half the amount of complex arithmetic computations needed for calculating an FFT structure compared with its current traditional approach. Finally, the results showed that for the proposed architecture design, for a 32 bit, 8-point DA-CBNS FFT structure, the results showed a 32% area reduction, 41% power reduction, 59% reduction in run-time, 42% reduction in logic gate cost, and 66% increase in speed. For a 28 bit, 16-point DA-CBNS FFT structure, its area size, power consumption, run-time, and logic gate, were also found to be reduced at approximately 30%, 37%, 60%, and 39%, respectively, with an increase of speed of approximately 67% when compared to the traditional approach that employs dedicated multipliers and computes its complex arithmetic as two separate entities: the real and imaginary.

Made available in DSpace on 2015-04-22T22:00:47Z (GMT). No. of bitstreams: 1 jose.pdf: 2255469 bytes, checksum: cebe37770c4719e5ebf2b60e4ae0d2a6 (MD5) Previous issue date: 2013-06-07 / CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Currently, the majority of multicarrier transmission systems are based on the Fourier transform, which is used as frequency multiplexing technique. The main advantages of this approach include multipath immunity and low computational complexity, due to the use of a family of fast algorithms, known as Fast Fourier Transform (FFT). However, when used to provide a robust transmission, this technique presents some disadvantages, like the need for a cyclic prefix, which demands part of the useful datarate. In this work, a study for verifying the possibility of replacing the FFT, by the wavelet transform, was carried out, which has the potential to raise some advantages, such as the removal of the cyclic prefix and a simpler synchronization procedure. A computational model for the transmission layer of the Integrated Services Digital Broadcasting Terrestrial, Brazilian version (ISDB-Tb) was created, aiming to provide a direct comparison between two versions: the traditional one, which is based on FFT, and a new proposal, which is based on wavelets. Such an evaluation was performed through the relation between error bit rate and signal-to-noise ratio, in additive white gaussian noise, Rayleigh and Rician fading and also in frequency-selective Rayleigh fading channels. Similar comparisons were also performed for the ETSI TS 101 475 (HIPERLAN-2) and Digital Video Broadcasting Terrestrial (DVB-T) systems. The simulation results show that the wavelet-based systems present a similar performance, when compared with the FFT-based ones, for the chosen channel models, and without employing a cyclic prefix, which allows a more efficiente spectrum use. / Atualmente, uma grande parte dos sistemas de transmissão multiportadoras é baseada na transformada de Fourier, como técnica de multiplexação em frequência. Dentre as suas principais vantagens, encontram-se a imunidade a multipercursos e a baixa complexidade computacional, através de algoritmos rápidos conhecidos como Fast Fourier Transform (FFT). Esta técnica, entretanto, para proporcionar uma transmissão robusta, apresenta a desvantagem de exigir prefixo cíclico, o que resulta no consumo de uma fatia do espectro útil. Neste trabalho, um estudo para se verificar a viabilidade de substituição da FFT pela transformada wavelet foi realizado, o que promete trazer algumas vantagens, tais como a não exigência de prefixo cíclico e uma sincronização mais simples. Um modelo computacional para a camada de transmissão do Integrated Services Digital Broadcasting - Terrestrial, Brazilian version (ISDB-Tb) foi criado, com o objetivo de proporcionar uma comparação entre duas versões: a atual, baseada em FFT, e uma nova proposta, baseada em wavelets. Tal avaliação foi realizada em termos das curvas de taxa de erro de bit versus relação sinal ruído, em canais com adição de ruído gaussiano branco, com desvanecimento plano de Rayleigh e Rice e também com desvanecimento seletivo em frequência de Rayleigh. Comparações similares também foram realizadas para os sistemas ETSI TS 101 475 (HIPERLAN-2) e Digital Video Broadcasting Terrestrial (DVB-T). Os resultados obtidos mostram que os sistemas baseados em wavelets apresentam desempenhos similares aos dos baseados em FFT, para os modelos de canal simulados, com a vantagem adicional de não utilizarem prefixo cíclico, o que promove um uso mais eficiente do espectro.

Fluid simulating is one of the most difficult problems in computer graphics. On the other hand, water appears in our life very frequently. This thesis focuses on water simulating. We have two main methods to do this in the thesis: the first is wave based water simulating; Sine wave summing based and Fast Fourier Transform based methods are all belong to this part. The other one is physics based water simulating. We make it based on Navier-Stokes Equation and it is the most realistic animation of water. It can deal with the boundary and spray which other method cannot express. Then we put our emphasis on implement by the physics method using Navier-Stokes Equation.

This thesis deals with questions of scanning electric activity of brain,¬ so-called electroencephalograph (undermentioned EEG), methods of audiovisual stimulation (undermentioned AVS) and a data-measurement processing. Theoretical part of the thesis is engaged in a theory of EEG signal creation, history and even in current methods of purchasing and processing of the EEG signal, theory of AVS and a theory of biofeedback. For measuring EEG signal with or without an application of AVS methods has been used EEG diagnostic device by Alien company. Its attributes are described in the thesis as well. For elaboration and analysis has been created a programme aplication EEG_xhroze00.fig which realizes frequency spectrum analysis using Fast Fourier Transform algorithm (FFT) and another programme aplication brain_mapping.fig for mapping activity of brain using designed algorithm.

Proteins are involved in almost all functions in a living cell, and functions of proteins are realized by their tertiary structures. Protein three-dimensional structures can be solved by multiple experimental methods, but computational approaches serve as an important complement to experimental methods for comparing and analyzing protein structures. Protein structure comparison allows the transfer of knowledge about known proteins to a novel protein and plays an important role in function prediction. Obtaining a global perspective of the variety and distribution of protein structures also lays a foundation for our understanding of the building principle of protein structures. This dissertation introduces our computational method to compare protein 3D structures and presents a novel mapping of protein shapes that represents the variety and the similarities of 3D shapes of proteins and their assemblies. The methods developed in this work can be applied to obtain new biological insights into protein atomic structures and electron density maps.