Purpose: This research will study how hyperspectral sensoring can assess the moisture content of lettuce by monitoring its growth in indoor vertical farming. Research questions: “What accuracy can be achieved when using hyperspectral sensoring for assessing the moisture content of lettuce leaves grown in vertical farming?” “How can vertical farming contribute to sustainability in conjunction with integration of NIR spectroscopy?” Methodology: This study is an experimental study with a deductive approach in which experiments have been performed using the hyperspectral technologies singlespot sensor and the hyperspectral camera Specim FX17 to collect spectral data. To analyze the data from the experiments two regression models were used and trained to make it possible to predict future moisture content values in lettuce. In order to get a better understanding and analyze the results from the experiments, a literature review was also conducted on how hyperspectral imaging has been applied to assess the quality of food products. Conclusion: The achieved accuracies were 58.24 % and 65.54 % for the PLS regression model and the Neural Network model respectively. Employing hyperspectral sensoring as a non-destructive technique to assess the quality of food products grown and harvested in vertical farming systems, contributes to sustainability from several aspects such as reducing food waste, minimizing costs and detecting different quality attributes that affect the food products. / Syfte: Syftet med denna studie är att undersöka hur hyperspektral avbildning kan användas för att bedöma fuktigheten i sallad genom att kontrollera hur den växer i vertikal odling inomhus. Frågeställningar: “Vilken noggrannhet kan uppnås vid användning av hyperspektral avbildning för att bedöma fukthalt hos salladsblad som odlas i vertikal odling?” “Hur kan vertikal odling bidra till hållbarhet i kombination med integration av NIR spectroscopy?”  Metod: Denna studie är en experimentell studie med en kvantitativ metod inom vilken en deduktiv ansats har tillämpats genom användning av de hyperspektrala teknologierna single-spot sensor och hyperspektralkameran Specim FX17 för insamling av spektral data. För att analysera datan från experimenten skapades och tränades två olika regressionsmodeller till att möjliggöra förutsägning av framtida värden av fukthalt i sallad. För att få en bättre förståelse för och kunna göra en bättre analys av resultaten från experimenten, utfördes även en litteraturöversikt på vad tidigare forskning om tillämpningen av hyperspektral avbildning för kvalitetssäkring av matprodukter har visat. Slutsats: Noggrannheten för PLS-regressionsmodellen var 58,24 % och 65,54 % för Neural Network-modellen. Minskat matsvinn och kostnader samt upptäcka olika kvalitetsattribut som påverkar livsmedelsprodukterna är de hållbara resultaten vid bedömning av kvalitet via hyperspektral sensing.

The continuing need for greater energy security and energy independence has motivated researchers to develop new energy technologies for better energy resource management and efficient energy usage. The focus of this dissertation is the development of optical (spectroscopic) sensing methodologies for various fuels, and energy applications. A fiber-optic NIR sensing methodology was developed for predicting water content in bio-oil. The feasibility of using the designed near infrared (NIR) system for estimating water content in bio-oil was tested by applying multivariate analysis to NIR spectral data. The calibration results demonstrated that the spectral information can successfully predict the bio-oil water content (from 16% to 36%). The effect of ultraviolet (UV) light on the chemical stability of bio-oil was studied by employing laser-induced fluorescence (LIF) spectroscopy. To simulate the UV light exposure, a laser in the UV region (325 nm) was employed for bio-oil excitation. The LIF, as a signature of chemical change, was recorded from bio-oil. From this study, it was concluded that phenols present in the bio-oil show chemical instability, when exposed to UV light. A laser-induced breakdown spectroscopy (LIBS)-based optical sensor was designed, developed, and tested for detection of four important trace impurities in rocket fuel (hydrogen). The sensor can simultaneously measure the concentrations of nitrogen, argon, oxygen, and helium in hydrogen from storage tanks and supply lines. The sensor had estimated lower detection limits of 80 ppm for nitrogen, 97 ppm for argon, 10 ppm for oxygen, and 25 ppm for helium. A chemiluminescence-based spectroscopic diagnostics were performed to measure equivalence ratios in methane-air premixed flames. A partial least-squares regression (PLS-R)-based multivariate sensing methodology was investigated. It was found that the equivalence ratios predicted with the PLS-R-based multivariate calibration model matched with the experimentally measured equivalence ratios within 7 %. A comparative study was performed for equivalence ratios measurement in atmospheric premixed methane-air flames with ungated LIBS and chemiluminescence spectroscopy. It was reported that LIBS-based calibration, which carries spectroscopic information from a “point-like-volume,” provides better predictions of equivalence ratios compared to chemiluminescence-based calibration, which is essentially a “line-of-sight” measurement.

京都大学 / 新制・課程博士 / 博士(教育学) / 甲第24353号 / 教博第283号 / 新制||教||214(附属図書館) / 京都大学大学院教育学研究科教育科学専攻 / (主査)教授 MANALO Emmanuel, 教授 楠見 孝, 准教授 野村 理朗 / 学位規則第4条第1項該当 / Doctor of Philosophy (Education) / Kyoto University / DGAM

Charles University, Faculty of Pharmacy in Hradec Králové Department of Biophysics and Physical Chemistry Author: Lucia Dulanská Supervisor: Mgr. Petra Pullmannová, Ph.D Title of thesis: Optimization of the skin barrier model with isolated ceramides of human Stratum corneum Stratum corneum (SC), the uppermost layer of the skin, regulates transcutaneous water loss and protects against outer conditions and harmful substances. It consists of cornified cells - corneocytes and extracellular lipid matrix, which is responsible for the barrier functions. Corneocytes are covered with covalently bound lipids creating the corneocyte lipid envelope (CLE). CLE is considered to interconnect the extracellular lipids with corneocytes and to have a templating effect. We aimed to optimize a skin lipid model simulating also the presence of CLE. The lipidic part of the model was prepared from an equimolar mixture of isolated human skin ceramides (hCer), cholesterol and free fatty acids (FFA, either protonated or deuterated) with 5 weight % of cholesteryl sulfate. hCer were extracted from the isolated human SC and purified by the column chromatography. The composition of hCer was determined by the high- performance thin-layer chromatography. The reverse-phase and normal phase silica gel particles served as the CLE...

Thesis (M.Sc. (Chemistry)) -- University of Limpopo, 2022 / Calcium and magnesium are two dominant species that contribute to water hardness. The aim of this study was to develop a poly (vinylidene fluoride-co hexafluoropropylene) (PVDF-HFP) composite membrane for treatment of water hardness. The synthesis of PVDF-HFP composite membranes was confirmed by X ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and Fourier transform infrared (FTIR) spectroscopy. The concentrations of the hardness causing agents in both the simulated and real hard water samples were investigated in batch studies wherein parameters such as pH, contact time, temperature, and adsorbent were optimised. The maximum adsorption efficiency of 56 and 45 mg/g (evaluated by Langmuir isotherm) for Ca(II) and Mg(II) ions were obtained. These were achieved at an optimum pH of 7 and adsorption dosage of 0.5 mg/L using the 3% PVDF-HFP/cellulose acetate (CA) and 1% nitrogen doped multiwalled carbon nanotubes (N-MWCNTs)/CA composite membranes respectively. The adsorption kinetics and isotherm models were all consistent with the pseudo-second order and Freundlich isotherm models for all the membranes suggesting that the sorption process met heterogeneous adsorption. Furthermore, the thermodynamic parameters indicated that the adsorption is physical and endothermic in nature. Reusability studies showed that all the PVDF-HFP based membranes can be recycled at least 3 times and for Ca(II) ions an adsorption loss of only 0.35 % was recorded while using a 3% PVDF-HFP/CA composite membrane. These results were further confirmed by XRD, TGA and inductively coupled plasma mass (ICP-MS) spectrometry. Thus, the findings from this study have shown that the PVDF-HFP based membranes could provide valuable material for hardness removal to acceptable level.

Contamination of peanuts by secondary metabolites of certain fungi, namely aflatoxins present a great health hazard when exposed either at low levels for prolonged times (carcinogenic) or at high levels at once (poisonous). It is important to develop an accurate and rapid measurement technique to trace the aflatoxin and/or source fungi presence in peanuts. Thus, current research focused on development of vibrational spectroscopy based methods for detection and separation of contaminated peanut samples. Aflatoxin incidence, as a chemical contaminant in peanut paste samples, was investigated, in terms of spectral characteristics using FTIR-ATR. The effects of spectral pre-processing steps such as mean-centering, smoothing the 1st derivative and normalizing were studied. Logarithmic method was the best normalization technique describing the exponentially distributed spectral data. Spectral windows giving the best correlation with respect to increasing aflatoxin amount led to selection of fat associated spectral bands. Using the multivariate analysis tools, structural contributions of aflatoxins in peanut matrix were detected. The best region was decided as 3028-2752, 1800-1707, 1584-1424, and 1408-1127 cm-1 giving correlation coefficient for calibration (R2C), root mean square error for calibration (RMSEC) and root mean square error for prediction (RMSEP) of 98.6%, 7.66ppb and 19.5ppb, respectively. Applying the constructed partial least squares model, 95% of the samples were correctly classified while the percentage of false negative and false positive identifications were 16% and 0%, respectively. Aspergillus species of section Flavi and the black fungi, A. niger are the most common colonists of peanuts in nature and the majority of the aflatoxin producing strains are from section Flavi. Seed colonization by selected Aspergillus spp. was investigated by following the chemical alterations as a function of fungal growth by means of spectral readouts. FTIR-ATR was utilized to correlate spectral characteristics to mold density, and to separate Aspergillus at section, species and strain levels, threshold mold density values were established. Even far before the organoleptic quality changes became visually observable (~10,000 mold counts), FTIR distinguished the species of same section. Besides, the analogous secondary metabolites produced increased the similarity within the spectra even their spectral contributions were mostly masked by bulk peanut medium; and led to grouping of species producing the same mycotoxins together. Aflatoxigenic and non-aflatoxigenic strains of A. flavus and A. parasiticus were further studied for measurement capability of FTIR-ATR system in discriminating the toxic streams from just moldy and clean samples. Owing to increased similarity within the collected spectral data due to aflatoxin presence, clean samples (having aflatoxin level lower than 20 ppb, n=44), only moldy samples (having aflatoxin level lower than 300 ppb, n=28) and toxic samples (having aflatoxin level between 300-1200 ppb, n=23) were separated into appropriate classes (with a 100% classification accuracy). Photoacoustic spectroscopy (PAS) is a non-invasive technique and offers many advantages over more traditional ATR system, specifically, for in-field measurements. Even though the sample throughput time is longer compared to ATR measurements, intact seeds can be directly loaded into sample compartment for analysis. Compared to ATR, PAS is more sensitive to high moisture in samples, which in our case was not a problem since peanuts have water content less than 10%. The spectral ranges between: 3600-2750, 1800-1480, 1200-900 cm-1 were assigned as the key bands and full separation between Aspergillus spp. infected and healthy peanuts was obtained. However, PAS was not sensitive as ATR either in species level classification of Aspergillus invasion or toxic-moldy level separation. When run for separation of aflatoxigenic versus non-aflatoxigenic batches of samples, 7 out of 54 contaminated samples were misclassified but all healthy peanuts were correctly identified (15 healthy/ 69 total peanut pods). This study explored the possibility of using vibrational spectroscopy as a tool to understand chemical changes in peanuts and peanut products to Aspergillus invasion or aflatoxin contamination. The overall results of current study proved the potential of FTIR, equipped with either ATR or PAS, in identification, quantification and classification at varying levels of mold density and aflatoxin concentration. These results can be used to develop quality control laboratory methods or in field sorting devices. / Ph. D.

Forage quality is a principal factor in managing both herbivores and the landscapes they use. Nutrition varies across the landscape, and in turn, so do the distributions of these populations. With the rise of remote sensing technologies (i.e. satellites, unmanned aerial vehicles, and multi/hyperspectral sensors), comes the ability to index forage health and nutrition swiftly. However, no methodology has been developed which allows managers to use unmanned aerial systems to the fullest capacity. The following methodologies produce compelling evidence for predicting forage quality metrics (such as fiber, carbohydrates, and digestibility) using 5 measured bands of reflectance (Blue, Green, Red, Red Edge, and NIR), 3 derived vegetation indices (NDVI, EVI and VARI), and a variety of environmental factors (i.e. time and sun angles) in a LASSO framework. Fiber content, carbohydrates, and digestibility showed promising model performance in terms of goodness-of-fit (R2= 0.624, 0.637, and 0.639 respectively).

The ability to maintain balance is based on various processes of motor control in complex neural networks of subcortical and cortical brain structures. However, knowledge on brain processing during the execution of whole-body balance tasks is still limited. In the present study, we investigated brain activity during slacklining, a task with a high demand on balance capabilities, which is frequently used as supplementary training in various sports disciplines as well as for lower extremity prevention and rehabilitation purposes in clinical settings. We assessed hemodynamic response alterations in sensorimotor brain areas using functional near-infrared spectroscopy (fNIRS) during standing (ST) and walking (WA) on a slackline in 16 advanced slackliners. We expected to observe task-related differences between both conditions as well as associations between cortical activity and slacklining experience. While our results revealed hemodynamic response alterations in sensorimotor brain regions such as primary motor cortex (M1), premotor cortex (PMC), and supplementary motor cortex (SMA) during both conditions, we did not observe differential effects between ST and WA nor associations between cortical activity and slacklining experience. In summary, these findings provide novel insights into brain processing during a whole-body balance task and its relation to balance expertise. As maintaining balance is considered an important prerequisite in daily life and crucial in the context of prevention and rehabilitation, future studies should extend these findings by quantifying brain processing during task execution on a whole-brain level.

No description available.

No description available.