<p></p><p></p><p>The unprecedented properties of 2D materials such as graphene and MoS2 have been researched extensively [1,2] for a range of applications including nanoscale electronic and optoelectronic devices [3–6]. Their unique physical and electronic properties promise them as the next generation materials for electrodes and other functional units in nanostructured devices. However, successful incorporation of 2D materials into devices entails development of high resolution patterning techniques that are applicable to 2D materials. Patterning at the sub-10 nm scale is particularly of great interest as the next technology nodes require patterning of (semi)conductors and insulators at 7 nm and 5 nm scales for nanoelectronics. It will also benefit organic photovoltaic cells as phase segregation of p/n-type semiconducting polymers on 2D electrodes at length scales smaller than the typical exciton diffusion length (10 nm)</p> <p>is expected to improve the charge separation efficiency [7].</p><br><p></p><p></p><p>Characterizing locally modulated properties of non-ovalently functionalized 2D materials requires high-resolution imaging techniques capable of extracting measurements of various physical/chemical properties. One such method is scanning probe microscopy (SPM) [18–21]. In Chapter 1, we present a brief review of SPM modalities, some of which are used to characterize interfacial properties, such as conductivity and local contact potential differences that can be modulated by amphiphilic assemblies [17, 22]. Atomic force microscopy (AFM) is one of main techniques that we use to determine topography. All imaging in this work were performed in attractive AC mode [23,24] in order to minimize disruption to the self-assembly of the amphiphiles by the scanning tip.</p><br><p></p><p></p><p>One challenge of using SAMs for locally modulated functionalization is that the proximity to the nonpolar interface can modify the behavior of the functionalities present on the surface in conjunction with the steric hindrance of 2D molecular assemblies. For instance, ionizable functional groups, one of the strongest local modulators of surface chemistry, undergo substantial pKa shifts (in some cases, > 5 units) at nonpolar interfaces, limiting their ability to ionize. In order to apply molecular assembly to create 2D chemical patterns, we needed to design alternative structures that can avoid such penalties against the intrinsic properties of functionalities present in the assemblies. Among amphiphiles, we observed that the chiral centers of phospholipids have the potential of elevating the terminal functional group in the head from the surface for improved accessibility. We refer to this type of assembly as a ’sitting’ phase. Chapter 2 describes sitting phase assembly of phospholipids; the projection of the terminal functionality allows it to maintain solution phase-like behavior while the dual alkyl tails provide additional stabilizing interactions with the substrates. Given the diversity of phospholipid architecture [25], the sitting phase assembly suggests the possibility of greatly diversifying the orthogonality of the chemical patterns, allowing highly precise control over surface functionalities.</p><br><p></p><p></p><p>While a variety of methods including drop-casting [26–28] and microcontact printing [29] have been used previously by others for noncovalent assembly of materials on the surface, they mostly address patterning scale in the sub-μm range. Here, we utilize Langmuir-Schaefer(LS) transfer, which has been historically used to transfer standing phase multilayers [30], and lying-down domains of PCDA at < 100 nm scales in the interest of molecular electronics [14, 31–33], as our sample preparation technique. LS transfer is remarkable in that the transferred molecules relinquish their pre-existing interactions in the standing phase at air-water interface to undergo ∼ 90◦ rotation and assemble into the striped phase on a substrate. This introduces the possibility of modulating local transfer rate across the substrate by manipulating local environment of the molecules. Thus, LS transfer has the potential to offer spatial control over the noncovalent chemical functionalization of the 2D substrate, essential in device applications.</p><br><p></p><p></p><p>In Chapter 3 and 4, We make comparative studies of various experimental factors such as surface pressure, temperature and molecular interactions that affect the efficiency of LS conversion. Considering the energetics of the transfer process, we predicted that the rate of transfer from the air-water interface to the substrate should be the highest from the regions around defects, which would be the energetically</p> <p>least stable regions of the Langmuir film [34, 35]. In Langmuir films, two phases of lipid assemblies—liquid expanded (LE) and liquid condensed (LC)—often coexist at the low surface pressures (< 10 mN/m) used for sample preparation. Hence, we hypothesized that the microscale structural heterogeneity of Langmuir films could be translated into microscale patterns in the transferred film on HOPG. We compare the transfer rates between LE and LC phases and investigate the impacts of physical conditions during LS transfer such as temperature, packing density, dipping rate and contact time to conclude that local destabilization of Langmuir films leads to increased transfer efficiency. (Chapter 3)</p><p><br></p><p></p><p>As in the case of lipid membranes that reorganize routinely based on the structure of the constituent molecules [36–38], the structure of Langmuir films is strongly dependent on the molecular structures of the constituent molecules [39–43]. Accordingly, we expected the molecular structures/interactions to provide additional control over the LS transfer process. In Chapter 4, we compare domain morphologies and the average coverages between three single chain amphiphiles and two phospholipids, each</p><p></p><p> </p><p>of which contain hydrogen bonding motifs of varying strengths. We show that by influencing the adsorption and diffusion rates, molecular architecture indeed influences LS conversion efficiency and subsequent assembly on the substrate. The presence of strong lateral interactions limits transfer and diffusion, forming vacancies in the transferred films with smaller domain sizes while weaker intermolecular interactions enabled high transfer efficiencies.</p><p></p><p><br></p><p></p>

Neste trabalho, estudamos a dinâmica de formação e dispersão de agregados de látex quando inseridos num cristal líquido liotrópico. Esse cristal líquido é um sistema ternário composto de laurato de potássio, cloreto de decilamônia e água; e apresenta fases nemáticas uniaxiais calamítica e discótica (NC e ND, respectivamente) e biaxial (NB). As partículas de látex possuem diâmetro de 100nm e partículas com diferentes tipos de recobrimentos foram testadas. Observamos que nas fases NC e NB há formação de aglomerados de partículas, porém na transição para a fase ND as partículas se dispersam no meio. Verificamos que esse processo de aglomeração e dissociação das partículas está relacionado com a transição de fase NB - ND e foi observado em dois sistemas hospedeiros por resfriamento e por aquecimento. No intervalo de temperatura que corresponde à fase nemática biaxial para o cristal líquido puro, observa-se que há um aumento na dimensão dos aglomerados, que se tornam anemométrico e orientados na direção de orientação do meio. Dois diagramas de fases foram construídos, variando-se a concentração de partículas dispersas no meio, e a composição relativa de surfactantes do sistema hospedeiro. Experimentos de espalhamento de raios X indicam que a distância média entre as micelas que formam o meio hospedeiro não é alterado pela inserção de partículas no cristal líquido e permanece a mesma em todas as fases nemáticas. Foram também realizados estudos de reologia que mostram que a viscosidade do sistema é alterada pela presença das partículas de látex. Os fenômenos observados são interpretados levando-se em conta as flutuações de orientação das micelas nas diferentes fases nemáticas. / In this work, we studied the dynamics of agglomeration and dissociation of latex particles when inserted into a lyotropic liquid crystal. This liquid crystal is a ternary system formed by potassium laurate, decilamonium chloride and water, presenting uniaxial calamitic and discotic nematic phases (NC e ND, respectively) and a biaxial nematic phase NB. The latex particles have diameter of 100 nm and particles with different surface treatments were tested. It was observed that in the NC e NB phases the latex particles form agglomerates, however in the transition to the ND phase, the particles disperse in the medium. In the temperature domain of the biaxial nematic phase the agglomerates increase in size, become anisometric and oriented along parallel to the orientation of the medium. Two phase diagrams were built by varying the particle concentration dispersed in the liquid crystal and by varying the relative composition of surfactants of the liquid crystal. X rays diffusion experiments have shown that the average distance between the micelles in the host medium are not affected by the presence of the latex particles and remain the same in all nematic phases. Rheology studies were also performed and it was found that the viscosity of the system is affected by the presence of the particles. The observed phenomenon are interpreted taking into account the orientational fluctuations of miceles in the different nematic phases.

Neste trabalho, estudamos a dinâmica de formação e dispersão de agregados de látex quando inseridos num cristal líquido liotrópico. Esse cristal líquido é um sistema ternário composto de laurato de potássio, cloreto de decilamônia e água; e apresenta fases nemáticas uniaxiais calamítica e discótica (NC e ND, respectivamente) e biaxial (NB). As partículas de látex possuem diâmetro de 100nm e partículas com diferentes tipos de recobrimentos foram testadas. Observamos que nas fases NC e NB há formação de aglomerados de partículas, porém na transição para a fase ND as partículas se dispersam no meio. Verificamos que esse processo de aglomeração e dissociação das partículas está relacionado com a transição de fase NB - ND e foi observado em dois sistemas hospedeiros por resfriamento e por aquecimento. No intervalo de temperatura que corresponde à fase nemática biaxial para o cristal líquido puro, observa-se que há um aumento na dimensão dos aglomerados, que se tornam anemométrico e orientados na direção de orientação do meio. Dois diagramas de fases foram construídos, variando-se a concentração de partículas dispersas no meio, e a composição relativa de surfactantes do sistema hospedeiro. Experimentos de espalhamento de raios X indicam que a distância média entre as micelas que formam o meio hospedeiro não é alterado pela inserção de partículas no cristal líquido e permanece a mesma em todas as fases nemáticas. Foram também realizados estudos de reologia que mostram que a viscosidade do sistema é alterada pela presença das partículas de látex. Os fenômenos observados são interpretados levando-se em conta as flutuações de orientação das micelas nas diferentes fases nemáticas. / In this work, we studied the dynamics of agglomeration and dissociation of latex particles when inserted into a lyotropic liquid crystal. This liquid crystal is a ternary system formed by potassium laurate, decilamonium chloride and water, presenting uniaxial calamitic and discotic nematic phases (NC e ND, respectively) and a biaxial nematic phase NB. The latex particles have diameter of 100 nm and particles with different surface treatments were tested. It was observed that in the NC e NB phases the latex particles form agglomerates, however in the transition to the ND phase, the particles disperse in the medium. In the temperature domain of the biaxial nematic phase the agglomerates increase in size, become anisometric and oriented along parallel to the orientation of the medium. Two phase diagrams were built by varying the particle concentration dispersed in the liquid crystal and by varying the relative composition of surfactants of the liquid crystal. X rays diffusion experiments have shown that the average distance between the micelles in the host medium are not affected by the presence of the latex particles and remain the same in all nematic phases. Rheology studies were also performed and it was found that the viscosity of the system is affected by the presence of the particles. The observed phenomenon are interpreted taking into account the orientational fluctuations of miceles in the different nematic phases.

Polymerverkapselte magnetische Nanopartikel versprechen, in der Zukunft sehr erfolgreich bei Anwendungen in der Biologie und der Medizin eingesetzt werden zu können z. B. in der Krebstherapie und als Kontrastmittel bei der magnetischen Kernspinresonanztomographie. Diese Arbeit zeigt, dass durch die interdisziplinäre Kombination verschiedener Techniken Herstellungsverfahren und Eigenschaften solcher Partikel verbessert werden können. <br /> <br /> Unter Miniemulsionen versteht man wässrige Dispersionen relativ stabiler Öltröpfchen, zwischen 30 und 50 nm Größe. Ein Nanometer (nm) ist der 1.000.000.000ste Teil eines Meters. Ein Haar ist ungefähr 60.000 Nanometer breit.<br /> <br /> Hergestellt werden Miniemulsionen durch Scherung eines Systems bestehend aus Öl, Wasser, Tensid (Seife) und einer weiteren Komponente, dem Hydrophob, das die Tröpfchen stabilisieren soll. Die Polymerisation von Miniemulsionen ermöglicht die Verkapselung anorganischer Materialen z. B. magnetischer Teilchen oder Gadolinium-haltiger Komponenten. Zu Optimierung des Verkapselung, ist es notwendig, die richtige Menge eines geeigneten Tensids zu finden. <br /> <br /> Die magnetischen polymerverkapselten Nanopartikel, die in einer wässrigen Trägerflüssigkeit dispergiert sind, zeigen in Abhängigkeit von Partikelgröße, Zusammensetzung, elektronischer Beschaffenheit, etc. ein sogenanntes superpara- oder paramagnetisches Verhalten. Superpara- oder paramagnetisches Verhalten bedeutet, dass die Flüssigkeiten in Anwesenheit äußerer Magnetfeldern ihre Fließfähigkeit beibehalten. Wenn das Magnetfeld entfernt wird, haben sie keine Erinnerung mehr daran, unter dem Einfluss eines Magnetfeldes gestanden zu haben, d. h., dass sie nach Abschalten des Magnetfeldes selbst nicht mehr magnetisch sind. <br /> <br /> Die Vorteile des Miniemulsionsverfahrens sind der hohe Gehalt und die homogene Verteilung magnetischer Teilchen in den einzelnen Nanopartikeln. Außerdem ermöglicht dieses Verfahren nanostrukturierte Kompositpartikel herzustellen, wie z. B polymerverkapselte Nanopartikel mit Nanoschichten bestehend aus magnetischen Molekülen. / Combining the magnetic properties of a given material with the tremendous advantages of colloids can exponentially increase the advantages of both systems. This thesis deals with the field of magnetic nanotechnology. Thus, the design and characterization of new magnetic colloids with fascinating properties compared with the bulk materials is presented. <br /> <br /> Ferrofluids are referred to either as water or organic stable dispersions of superparamagnetic nanoparticles which respond to the application of an external magnetic field but lose their magnetization in the absence of a magnetic field. <br /> <br /> In the first part of this thesis, a three-step synthesis for the fabrication of a novel water-based ferrofluid is presented. The encapsulation of high amounts of magnetite into polystyrene particles can efficiently be achieved by a new process including two miniemulsion processes. The ferrofluids consist of novel magnetite polystyrene nanoparticles dispersed in water which are obtained by three-step process including coprecipitation of magnetite, its hydrophobization and further surfactant coating to enable the redispersion in water and the posterior encapsulation into polystyrene by miniemulsion polymerization. It is a desire to take advantage of a potential thermodynamic control for the design of nanoparticles, and the concept of &quot;nanoreactors&quot; where the essential ingredients for the formation of the nanoparticles are already in the beginning. The formulation and application of polymer particles and hybrid particles composed of polymeric and magnetic material is of high interest for biomedical applications. Ferrofluids can for instance be used in medicine for cancer therapy and magnetic resonance imaging.<br /> <br /> Superparamagnetic or paramagnetic colloids containing iron or gadolinium are also used as magnetic resonance imaging contrast agent, for example as a important tool in the diagnosis of cancer, since they enhance the relaxation of the water of the neighbouring zones. New nanostructured composites by the thermal decomposition of iron pentacarbonyl in the monomer phase and thereafter the formation of paramagnetic nanocomposites by miniemulsion polymerization are discussed in the second part of this thesis. In order to obtain the confined paramagnetic nanocomposites a two-step process was used. In the first step, the thermal decomposition of the iron pentacarbonyl was obtained in the monomer phase using oleic acid as stabilizer. In the second step, this iron-containing monomer dispersion was used for making a miniemulsion polymerization thereof. <br /> <br /> The addition of lanthanide complexes to ester-containing monomers such as butyl acrylate and subsequent polymerization leading to the spontaneous formation of highly organized layered nanocomposites is presented in the final part of this thesis. By an one-step miniemulsion process, the formation of a lamellar structure within the polymer nanoparticles is achieved. The magnetization and the NMR relaxation measurements have shown these new layered nanocomposites to be very apt for application as contrast agent in magnetic resonance imaging.

This thesis deals with the use of electric fields for evaluation and control of chemical systems. An electric field can result in the flow of charge across an interface between a metal and a solution, by means of chemical reactions. This interplay between electricity and chemistry, i.e. electrochemistry, is a field of crucial importance both within research and industry. Applications based on electrochemical principles encompass such diverse areas as batteries and fuel cells, pH electrodes, and the glucose monitor used by people suffering from diabetes.A major part of the present work concerns the use of static electric fields in solutions containing a non-contacted metal surface. In such a setup it is possible to control the extent of electrochemical reactions at different positions on the metal. This allows the formation and evaluation of various types of gradients on electrodes, via indirectly induced electrochemical reactions. This approach is a new and simple way of forming for instance molecular gradients on conducting surfaces. These are very advantageous in biomimetic research, because a gradient contains a huge amount of discrete combinations of for example two molecules. The basis for the technique is the use of bipolar electrochemistry. Briefly, a surface can become a bipolar electrode (an electrode that acts as both anode and cathode) when the electric field in the solution exceeds a certain threshold value, thereby inducing redox reactions at both ends. In our experiments, the driving force for these reactions will vary along the electrode surface. Since the result of an electrochemical reaction can be the deposition or removal of material from an electrode, bipolar electrochemistry can be used to create gradients of that material on a surface. In order to gain a deeper understanding of these processes, the potential and current density distributions at bipolar electrodes were investigated with different methods. Especially the use of imaging techniques was important for the visualization and analysis of the gradients. Using this knowledge, the formation of more complex gradients was facilitated, and the results were further compared to simulations based on simple conductivity models. These simulations also provided us with means to predict the behavior of new and interesting setup geometries for pattering applications.The other major part is more application driven and deals with the use of alternating electric fields for chemical analysis, a technique known as electrochemical impedance spectroscopy (EIS). In this work, EIS has been applied for the analysis of engine oils and industrial cutting fluids. Emphasis was placed on practical aspects of the measurement procedure, and on the evaluation of the results using statistical methods. It was for example shown that it was possible to simultaneously determine the amount of different contaminants in low conducting solutions. Generally, EIS is used to measure the impedance of a solution or a solid, often as a function of the frequency of the alternating electric field. The impedance of a system is closely correlated to its complex dielectric constant, and EIS can therefor be used to examine many chemical and physical processes. It is further well suited for characterizing low conducting media with little or no redox-active species. The evaluation of impedance data is often a quite complex task, which is why we have made use of statistical methods that drastically reduce the effort and quickly reveal significant intrinsic parameters.

Hydrogen is the smallest element in the periodical table. It has been shown in several studies that hydrogen has a large influence on the corrosion and cracking behaviour of stainless steels. Hydrogen is involved in several of the most common cathode reactions during corrosion and can also cause embrittlement in many stainless steels. Some aspects of the effect of hydrogen on corrosion and hydrogen-induced stress cracking, HISC, of stainless steels were studied in this work. These aspects relate to activation of test specimens for uniform corrosion testing, modification of a test cell for dewpoint corrosion testing and the mechanism of hydrogen-induced stress cracking. The results from uniform corrosion testing of superduplex stainless steels indicated that there is a large difference between passive and activated surfaces in hydrochloric acid and in lower concentrations of sulphuric acid. Hence, initial activation of the test specimen until hydrogen evolution can have a large influence on the results. This may provide another explanation for the differences in iso-corrosion curves for superduplex stainless steels that have previously been attributed to alloying with copper and/or tungsten. In concentrated sulphuric acid, potential oscillations were observed; these oscillations activated the specimen spontaneously. Due to these potential oscillations the influence of activation was negligible in this acid. An experimental set-up was developed for testing dewpoint corrosion of stainless steels in a condensate containing 1 % hydrochloric acid. There was an existing experimental set-up that had to be modified in order to avoid azeotroping of the water and hydrogen chloride system. A separate flask with hydro chloric acid was included in the experimental set-up. The final set-up provided reasonably good agreement with field exposures in contrary to much higher corrosion rates in the original set-up. Relaxation and low temperature creep experiments have been performed with several stainless steels in this work. The aim was to understand how creep and relaxation relates to material properties and the relative ranking between the tested materials. For low temperature creep with a load generating stresses below the yield strength, as well relaxation at stress levels above and below the yield strength, the same ranking with respect to changes in mechanical properties of the steel grades was found. For low temperature creep with a load level above the yield strength, the same ranking was not obtained. This effect can most probably be explained by annihilation and generation of dislocations. During low temperature creep above the yield strength, dislocations were generated. In addition, low temperature creep experiments were performed forone superduplex stainless steel in two different product forms with differentaustenite spacing in the microstructure. The superduplex material experienced low temperature creep at a lower load level for the material with large austenite spacing compared to the one with smaller austenite spacing. Also this differenceis influenced by dislocations. In a material with small austenite spacing the dislocations have more obstacles that they can be locked up against. Studies of the fracture surfaces of hydrogen induced stress cracking, HISC, tested duplex stainless steels showed that HISC is a hydrogen-enhanced localised plasticity, HELP, mechanism. Here a mechanism that takes into account the inhomogeneous deformation of duplex stainless steels was proposed. This mechanism involves an interaction between hydrogen diffusion and plastic straining. Due to the different mechanical properties of the phases in a superduplex stainless steel, plastic straining due to low temperature creep can occur in the softer ferrite phase. A comparison between low temperature creep data showed that for the coarser grained material, HISC occurs at the load levelwhen creep starts. However, in the sample with small austenite spacing, HISC did not occur at this load level. Microhardness measurements indicated that the hydrogen level in the ferrite was not high enough to initiate cracking in the coarser material. The proposed mechanism shows that occurrence of HISC is an interaction between local plasticity and hydrogen diffusion. / QC20100618

With increasing environmental awareness, the desire to protect human beings and the environment from adverse effects induced by dispersed metals has become an issue of great concern and interest. New policies, such as REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) within the European Community, have been implemented to reduce hazards posed by the use of chemicals on producers and downstream users. The generation of exposure assessment data and relevant test procedures able to simulate realistic scenarios are essential in such legislative actions. This doctoral study was initiated to fill knowledge gaps related to the metal release process of stainless steels. A wide range of stainless steel grades, fourteen in total, were investigated. They cover a very broad range of applications, and the focus in the thesis was to simulate a few selected exposure scenarios: precipitation, the human body and food intake. Comparisons were made between metal release from stainless steel alloys and the pure metals that constitute each stainless steel in order to explore the differences between alloys and pure metals, and to provide quantitative data on metal release rates of different alloy constituents. Because of similar surface properties between stainless steel and pure chromium, this metal exhibits similar release rates, whereas iron and nickel exhibit significantly lower release rates as alloy components than as pure metals. Detailed studies were also performed to elucidate possible relations between metal release and steel surface properties. Key parameters turned out to be chromium enrichment of the self-passivating surface film, surface roughness, the electrochemically active surface area and the microstructure of the steel substrate. The degree of metal release increased with decreasing chromium content in the surface oxide, increasing surface roughness, and increasing presence of inhomogeneities in the bulk matrix. More detailed studies were initiated to possibly correlate the nucleation of metastable pits and the extent of metal release. Evidence was given that metastable pits exist even when the stainless steel is passive, and may cause extremely short-lived bursts of released metal before the surface film repassivates again. / QC 20100810

The aim of this thesis work is to study the physico-chemical properties of poly(ethylene oxide), PEO, based brush polymers both in solution and at solid/aqueous interfaces. The importance of studying the surface properties of brush polymers can be related to a broad spectrum of interfacial-related applications such as colloidal stability, lubrication, detergency, protein repellency to name a few. In many applications it is desirable to form brush-like structures through simple physisorption. In this context the surface properties of PEO based brush polymers differing in molecular architecture were studied, using ellipsometry and surface force apparatus (SFA), to gain some understanding regarding the effect of molecular architecture on the formation of brush structures. The molecular architecture was varied by varying the charge/PEO ratio along the backbone. This study demonstrates that the formation of a brush structure at solid/aqueous interface is due to interplay between the attraction of the backbone to the surface and the repulsions between the PEO side chains. An optimal balance between the two antagonistic factors is required if one aims to build a well-defined brush structure at the interface. In this study the brush-like structures are formed when 25-50% of the backbone segments carry poly(ethylene oxide) side chains. Scattering techniques such as light and neutron reveal that these brush polymers are stiff-rods up to a charge to PEO ratio of 75:25. These stiff PEO brush polymer easily replace the more flexible linear PEO at the silica/water interface, the reason being that the entropy loss on adsorption is smaller for the brush polymer due to its stiff nature.  Polymer-surfactant systems play a ubiquitous role in many technical formulations. It is well known that linear PEO, which adopts random coil conformation in aqueous solution, interact strongly with the anionic surfactant, Sodium Dodecyl Sulphate (SDS). It is of interest to study the interaction between SDS and brush PEO owing to the fact that the PEO side chains have limited flexibility as compared to the linear PEO.  The interaction between brush PEO and the anionic surfactant SDS in solution are studied using different techniques such as NMR, tensiometry, SANS and light scattering. The main finding of this study is that the interaction is weaker compared to the linear PEO-SDS interactions which poses an interesting question regarding the role of chain flexibility in polymer-surfactant interactions. / QC 20100813

This thesis focuses on the study of the interactions between polyelectrolytes and surfactants in aqueous solutions and at interfaces, as well as on the structural changes these molecules undergo due to that interaction. Small–angle neutron scattering, dynamic, and static light scattering were the main techniques used to investigate the interactions in bulk. The first type of polymer studied was a negatively charge glycoprotein (mucin); its interactions with ionic sodium alkyl sulfate surfactants and nonionic surfactants were determined. This system is of great relevance for several applications such as oral care and pharmaceutical products, since mucin is the main component of the mucus layer that protects the epithelial surfaces (e.g. oral tissues). Sodium dodecyl sulfate (SDS) on the other hand, has been used as foaming agent in tooth pastes for a very long time. In this work it is seen how SDS is very effective in dissolving the large aggregates mucin forms in solution, as well as in removing preadsorbed mucin layers from different surfaces. On the other hand, the nonionic surfactant n-dodecyl β-D-maltopyranoside (C12-mal), does not affect significantly the mucin aggregates in solution, neither does it remove mucin effectively from a negatively charge hydrophilic surface (silica). It can be suggested that nonionic surfactants (like the sugar–based C12-mal) could be used to obtain milder oral care products. The second type of systems consisted of positively charged polyelectrolytes and a negatively charged surfactant (SDS). These systems are relevant to a wide variety of applications ranging from mining and cleaning to gene delivery therapy. It was found that the interactions of these polyelectrolytes with SDS depend strongly on the polyelectrolyte structure, charge density and the solvent composition (pH, ionic strength, and so on). Large solvent isotopic effects were found in the interaction of polyethylene imine (PEI) and SDS, as well as on the interactions of this anionic surfactant and the sugar–based n-decyl β-D-glucopyranoside (C10G1). These surfactants mixtures formed similar structures in solutions to the ones formed by some of the polyelectrolytes studied, i.e. ellipsoidal micelles at low electrolyte concentration and stiff rods, at high electrolyte and SDS concentrations. / QC 20100901

The cellular response to a biomaterial, such as a dental implant, is mainly governed by the surface properties, and can thus be altered by the introduction of a surface coating. In this thesis the buildup of a biomacromolecule-based coating formed by layerby-layer (LbL) deposition of the charged polypeptides poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) has been studied. In an attempt to make these coatings bioactive and useful for bone-anchored implants, an amelogenin protein mixture (EMD), has been immobilized in these thin polyelectrolyte multilayer (PEM) films. Multilayers were also built by LbL deposition of the natural biomacromolecules collagen (Col) and hyaluronic acid (HA). Multilayer films of these two extra-cellular biomacromolecules should be of interest for use as a scaffold for tissue engineering. The buildup of the multilayer films has been followed in situ, using ellipsometry, quartz crystal microbalance with dissipation (QCM-D), and dual polarization interferometry (DPI). The studied PLL/PGA multilayers were found to be highly hydrated, and to exhibit a two-regime buildup behavior, with an initial “slow-growing” regime, and a second “fast-growing” regime with a linear growth in film thickness and more than linear growth in mass. A net diffusion of polypeptides into the film during the buildup led to an increase in density of the films for each layer adsorbed. A change in density was also observed in the Col/HA film, where HA penetrated and diffused into the porous fibrous Col network. The formed PLL/PGA films were further found to be rather stable during drying, and post-buildup changes in temperature and pH, not losing any mass as long as the temperature was not raised too rapidly. The film thickness responded to changes in the ambient media and collapsed reversibly when dried. A swelling/de-swelling behavior of the film was also observed for changes in the temperature and pH. The EMD protein adsorbed to silica surfaces as nanospheres, and could by itself form multilayers. The adsorption of EMD onto PLL/PGA multilayer films increased at lower pH (5.0), and EMD could be immobilized in several layers by alternate deposition of EMD and PGA. / QC 20101019