Dopamine (DA) is a key striatal neuromodulator central to normal functioning of the basal ganglia. Identifying and characterizing circuits governing striatal DA transmission is necessary for understanding DA involvement in adaptive behaviour and pathology. Properties of evoked striatal DA release can be examined using fast-scan cyclic voltammetry at carbon fibre microelectrodes, a technique enabling live monitoring of transmitter release events with sub-millisecond resolution. Experimental work presented in this thesis employed this approach to study regulation of striatal DA by acetylcholine (ACh) in health and disease in acute brain slices. Synchronous activity in a small population of striatal cholinergic interneurons (ChIs) was previously shown to directly drive striatal DA release. Here using optogenetic approach I explore physiological relevance of ChI-evoked drive of striatal DA by examining whether corticostriatal and thalamostriatal afferents to ChIs can trigger ACh-evoked DA events. Following floxed vector injections in motor cortex or caudal intralaminar thalamus of CaMK2a-Cre mice I examine the properties of evoked DA upon light activation of channelrhodopsin-2-transduced inputs to striatal ChIs. These experiments revealed that both cortical and thalamic afferents are capable of driving ACh-evoked DA release, but operate using a different complement of post-synaptic ionotropic glutamate receptors and display distinct release recovery profiles. I further explore if rebound excitation in a population of striatal ChIs could drive DA events by examining whether ACh-evoked DA release follows optical inhibition of striatal ChIs selectively expressing hyperpolarizing halorhodopsin 3.0 or archaerhodopsin 3.0 in ChAT-Cre mice. This work showed that hyperpolarizing ion pumps were not successful in triggering ChI-evoked DA release. I also investigate whether cholinergic brainstem innervation of striatum could contribute to or drive ACh-evoked striatal DA events in ChAT-Cre rat, concurrently showing that ChI-evoked DA release is not a species artefact, and is present in mouse and rat alike. Current results also suggest that cholinergic brainstem afferents do not drive or contribute to striatal ACh-evoked DA events. Close interaction between DA and ACh systems further indicates that ACh could impact dopaminergic dysfunction. To explore this I examined the state of ACh transmission in a mouse model of Parkinson’s disease overexpressing human wild type alpha–synuclein protein. These animals present with impaired striatal DA release from young age, but DA deficits could be mediated by changes in ACh tone. Here I show that impaired striatal DA release is the results of primary DA axon dysfunction, although in ventral striatum DA release deficits could be partially compensated by increased ACh tone at nicotinic receptors. I further show that the functional state of muscarinic ACh receptors in not altered following decreased DA transmission, although the data from aged animals suggest that alpha–synuclein-dependent changes in vesicle handling could contribute to impaired DA releasability. Finally, I show that vesicle handling may indeed be altered in this mouse model as impaired DA release is evident with short stimulation protocols, while with prolonged depolarization of DA axon terminals alpha–synuclein-overexpressor mice are better able to sustain evoked DA release. Overall, the main body of work presented in this thesis examined the processes regulating striatal DA transmission via ACh system. In particular, I show that ChI-evoked drive of striatal DA release can be recruited physiologically and further establish that changes in ACh transmission are not the primary drivers of impaired DA releasability in a mouse model of Parkinson’s disease overexpressing human alpha–synuclein protein.

Heme containing proteins and their reactivity play a central role in biological systems; they have a vast range of functions including electron transfer, catalysis, and respiration. Cytochromes c and heme c containing proteins have been used widely as model systems to understand how structure and dynamics lead toward function. In this thesis, a variety of biophysical methods are used to investigate two heme c containing model systems to gain insight into how redox potential and reactivity are modulated through changes in the local environment. Mitochondrial cytochrome c undergoes several pH dependent conformational rearrangements that involve different heme ligation and have associated changes in redox potential. Under basic conditions (pH greater than 8), the axial methionine (Met) residue is replaced by one of several nitrogen based ligands, usually a nearby lysine residue, and is coined the "alkaline transition". It is accompanied by a large downward shift in redox potential. The functional utility of this conformational change is not fully understood however it is strongly implicated in the signaling cascade for apoptosis. Bacterial monoheme cytochromes c exhibit similar phenomenological Met-loss behavior as a function of electrode material. In Chapter 2 we utilize Hydrogenobacter thermophilus cytochrome c552 as a model system for the assessment of redox thermodynamics and changes in redox potential associated with the Met-loss form. In Chapter 3 we extend our investigation to homologous cytochromes c. Bacterial cytochrome c peroxidases catalyze the two-electron reduction of hydrogen peroxide to water utilizing cytochrome c as an endogenous electron donor. Chapter 4 describes the first recombinant construct of the diheme Nitrosomonas europaea cytochrome c peroxidase (Ne CCP); a defining family member of constitutively active cytochrome c peroxidases. A variety of biophysical techniques were used to confirm similarity between the recombinant Ne CCP and native enzyme. Chapter 5 extends our investigation to the role of constitutively conserved glutamine and glutamic acid residues within the active site, and two conserved tryptophan residues; the first situated between hemes and the second distal to the active site. In Chapter 6, stopped flow spectroscopy is used to investigate the first intermediates of the Ne CCP catalytic mechanism.

>Magister Scientiae - MSc / This project focuses on the development of simple, highly sensitive, accurate, and low cost electrochemical sensors based on the modification of pencil graphite electrodes by the electrochemical reduction of graphene oxide-metal salts as nanocomposites (ERGO-MC-PGE; MC = Sb or Au nanocomposite). The electrochemical sensors ERGO-Sb-PGE and ERGO-Au-PGE were used in the determination of paracetamol (PC) in pharmaceutical formulations using adsorptive stripping differential pulse voltammetry. The GO was prepared from graphite via a modified Hummers’ method and characterized by FTIR and Raman spectroscopy to confirm the presence of oxygen functional groups in the conjugated carbon-based structure whilst, changes in crystalline structure was observed after XRD analysis of graphite and GO. / 2023-10-07

No description available.

Electrochemical behavior of mono- and bimetallic chromiumtricarbonyl and cationic manganesetricarbonyl of fluxional dibenzo[a,e]cyclooctatetraene (DBCOT) complexes were studied via cyclic voltammetry over a range of scan rates (20 – 2000 mV/s) and temperatures (0 °C and 25 °C). The presented work displays electrochemical reduction mechanisms associated with eight-membered ring coordinated M(CO)3 systems that undergo rapid ring inversion in solution. The electrochemical studies of these complex systems exhibit comparitively similar behaviors, which suggest relatively undifferentiated mechanisms. Slight differences between the chromium and isoelectronic cationic manganese are seen in their chemical reactions in solution and the potential at which they reduce. The significance of the electrochemical studies of these complexes are justified by their potential contribution to nanotechnology considering the possibility of generating a cylindrical nanostructure containing the tub-shaped eight-membered ring ð-coordinated M(CO)3 system. The high probability of a haptotropic shift to the eight-membered ring upon reduction could prove to be beneficial to electrocatalysis.

No description available.

No description available.

No description available.

Micro- and nano-electrodes have distinct advantages over large electrodes, including their decreased iR drop and enhanced mass transport due to radial diffusion characteristics which leads to the ready establishment of a steady state (or near steady-state) signal without convection. This enhanced mass transport also leads to increased current densities and signal to noise ratios. However, there is a need for fabrication techniques which reproducibly give micro- and nano-electrodes of controlled size and shape. The optimisation of systematic arrays on the nano-scale, open up possibilities for developing highly sensitive electrode devices, for use in physical chemistry and the determination of fast electrode kinetics and rates of reaction, as well as to provide highly sensitive electroanalytical devices, able to detect very low concentrations of substrates. This thesis first presents work involving the fabrication and characterisation on silicon substrates of square platinum microelectrodes. There is already an established theory for the behaviour of microdisc electrodes however, it is easier to make microsquares reproducibly using pixellated photomasks. The voltammetric and ac impedance characteristics of these electrodes in background electrolyte and in the presence of ferri/ferrocyanide redox couple are presented and the response is theoretically analysed. A combination of computer simulation, theory and experimentation show that these electrodes have increased current densities (14% greater) compared with a microdisc of equivalent radius and an alternative theoretical expression is presented to calculate the limiting current of microsquares at all dimensions. This thesis then discusses the development and optimisation of novel nano-band cavity array electrodes (CaviArE), using standard photo-microlithographic techniques. The resulting architecture encloses a Platinum nanoband of 50 nm width within each array element that is positioned half way up the vertical edges of shallow square cavities (depressions), with a total depth of 1050 nm. The width of the square cavity and the separation of the array elements can be controlled and systematically altered, with great accuracy. The CaviArE devices are shown to give quantitative pseudo-steady-state responses characteristic of multiple nanobands, whilst passing overall currents consistent with a macroelectrode. The array has a much enhanced signal-tonoise ratio compared with an equivalent microsquare array, as it has 0.167% of the area and is therefore markedly less affected by non-Faradaic currents, while it passes comparable Faradaic currents. At high sweep rates the response is also virtually unaffected by solution stirring. The impedammetric characteristics presented show different diffusional regimes at high, medium and low frequencies, associated with diffusion within individual square cavities, outside of the cavity and finally across the whole array as the diffusional fields of the neighbouring array elements overlap. Justification and fitting of equivalent circuits to these frequency regions provide details about the charge transfer, capacitance and diffusional processes occurring. The results show that these systems are highly sensitive to surface transfer effects and a rate constant for ferricyanide of 1.99 cm s-1 was observed, suggesting fast kinetic processes can be detected. Together, these characteristics make nanoband electrode arrays, with this architecture, of real interest for sensitive electroanalytical applications, and development of devices for industrial application is currently being undertaken.

Thesis (PhD (Chemistry and Polymer Science))--University of Stellenbosch, 2010. / Electrochemical behaviour of Ce, Fe, Cr,V and Mn in the presence of DTPA, EDTA, EDDS, NTA ligands were investigated by using cyclic voltammetry, a rotating disc electrode and electrochemical impedance spectroscopy for use in redox flow battery (RFB) systems. RFB is currently used for energy storage, the vanadium, which is used in most of the RFB’s, however suffers from species crossover and sluggish reactions, which limit the lifetime of the battery. These various ligands and metal complexes mentioned above where all examined to identify the suitable and favoured electrolyte that can be used for a RFB system. Kinetic parameters such as potential, limiting current, transfer coefficient, diffusion coefficients, and rate constants were studied. RDE experiments confirmed that the parameters measured by CV are similar under hydrodynamic conditions and can be used to determine the kinetic parameters of the redox couples. The use of DTPA as a ligand for complexation of Ce(IV) gave more favourable results compared to other ligand with various metal complexes used in this study [1-3]. The results of kinetic studies of Ce(IV)–DTPA complex shows promise as an electrolyte for a redox flow battery. The separation of V(IV)/(V), Fe (III)/(IV),Cr(III)/(IV),Mn (III)/(IV) and Ce(III)/(IV) with various ligands (EDTA, EDDS, NTA and DTPA) were also investigated using capillary electrophoresis. To understand the speciation of these metal complexes as used in this study and particularly the vanadium, for the reason that it has a complicated (V) oxidation state. The charge/discharge performance of all electrolytes used in this work was determined and a high voltage achieved when Ce-DTPA was used, and it is compared to that of the vanadium electrolyte currently in use. This was evaluated with systems studied previously. Therefore, Ce-DTPA will be a suitable electrolyte for redox flow battery systems.