Forskningsområdet för bärbar elektronik är fortfarande relativt ungt och det finns ett stort behov av utveckling av nya material inom området. Olika typer av kompositer är mycket intressanta och de ska uppvisa såväl hög hållfasthet som goda ledande egenskaper. I detta avseende är silkes fibroin och MXene mycket intressanta utgångsmaterial eftersom silkestrådarna kan ge en struktur med god jonledningsförmåga och god flexibilitet och MXene kan bidra med hög styvhet och god elektrisk ledningsförmåga. Med detta som bakgrund beslöts att undersöka om kompositer av silkestrådar och MXene kan användas i kompositer som kan användas i bärbar elektronik. 3 olika typer av hydrogeler studerades och de innehöll silkes fibroin med 0, 1 och 5% MXene. De egenskaper som utvärderades var struktur, mekaniska egenskaper, stabilitet i vatten, bionedbrytbarhet och både statisk och dynamisk ledningsförmåga. Resultaten visar att de tillverkade nanokompositerna har lovande förutsättningar inom området eftersom en kombination av silkes fibroin med 5 % MXene har god stabilitet, konduktivitet och en hög och stabil Gauge-faktor. / As the research area of wearable electronics is still relatively new, material science with this focus opens plenty of unexplored fields. That is why a study characterizing the unexplored composite system of silk fibroin and MXene (Silk/MXene) was conducted. These two biocompatible materials are complementary with regard to the requirements for wearable electronics materials. Silk fibroin dispose an ionic conductivity and solid flexibility, while MXene brings mechanical strength and significant increase of electrical conductivity. The reinforced hydrogel materials were studied at two concentrations of fillers, 1% and 5% and compared to pristine silk fibroin. All three materials were studied from the point of view of their structure, mechanical properties, behaviour in aqueous environment, biodegradability and electrical conductivity, both static and dynamic. Nanocomposite systems of silk fibroin and MXene have shown a potential for being used in the intended application area, as Silk/MXene 5% film displays good stability, conductivity with high andstable Gauge factor.

No description available.

As prominent components of the Internet-of-Things (IoT) front-end, sensors capable of intelligently collecting sensing information from the surrounding environment with increasingly lower prices are required. Planar microwave chipless sensors could be a valid solution and will be the focus of this PhD research proposal. With a completely passive solution, that in its basic configuration is composed by only microstrip resonant structures and sensitive materials, this frequency-domain sensing technology results particularly adapt for the integration in smart devices. The objectives of the PhD activity will be to contribute with a further investigation of sensitive materials in the context of environmental monitoring and to test their reliability as sensitive components in controlled wired condition. The purpose is, then, to move from a wired controlled measurement to a wireless reading acquisition of the microwave sensing node response. Finally, the sensor potentialities will be further enriched by adopting fabrication techniques typical of the flexible electronics field. An inkjet printing strategy is investigated for the purpose trying to ensure good detection properties as in the case of standard fabricated tags.

Atrial fibrillation is a cardiac condition in which the heart rate is abnormally fast and/or irregular. While not yet proven to be fatal on its own, it severely increases the probability of developing further medical conditions including a five times higher risk of getting stroke. The prevalence has, over the past decades, increased significantly across the world and was in 2014 approximated at roughly 2% in the European population. Though, this number is expected to further increase in the coming years and decades. Therefore, in order to reduce suffering and save lives, it is vital that there is an efficient way of treating this condition. Current treatment methods include medicine, cardioversion, and tissue ablation. This thesis focuses on tissue ablation, more particularly cryoballoon ablation, which is a minimally invasive procedure in which a cryoballoon catheter is guided through a blood vessel (generally accessed through an incision made in the groin area) to the heart. When inside the atrial chambers the balloon can be inflated, put into contact with the faulty tissue and then be injected with liquid nitrous oxide which vaporizes and freezes said tissue isolating the currents causing the irregular heartbeat. This thesis aims to attach flexible electronics to the outside of the cryoballoon, which should then be able to inform the operator that adequate contact has been achieved before freezing, thereby increasing the probability of successful ablation. Three prototypes were created using polyurethane balloons, flexible circuit boards and a biocompatible, flexible cyanoacrylate adhesive. The flexible circuit boards were arranged in different patterns for each prototype to see which configuration would best suit the application. It was found that narrow strips (single trace) aligned axially and spaced evenly along the circumference best accomplished the goal. The traces did, however, not adhere as well to the balloon as was hoped which likely was due to user error during the gluing procedure but a further investigation may be desired to ensure that the materials and adhesive are compatible. / Förmaksflimmer är ett hjärtfel som gör att hjärtslagen blir ovanligt snabba och/eller oregelbundna. Trots att det inte bevisats vara direkt dödligt än, ökar det kraftigt risken för att utveckla ytterligare medicinska besvär, bland annat fem gånger större risk att drabbas av stroke. Utbredningen av förmaksflimmer har under de senaste decennierna ökat avsevärt över hela världen och under 2014 uppskattades det att ungefär 2 % av den europeiska befolkning var drabbade. Den här siffran förväntas dock fortsätta öka under de kommande åren och decennierna. Därför, för att i största mån lindra smärta samt förhindra dödsfall, är det mycket viktigt att det finns ett effektivt sätt att behandla tillståndet. I nuläget innefattas behandling av medicin, elektrokonvertering eller vävnadsablation. Det här examensarbetet fokuserar på ablation, närmare bestämt kryoballongsablation, vilket är ett minimalinvasivt ingrepp som innebär att en kryoballongskateter förs in genom en blodådra (ofta via ett snitt i ljumsken) in i hjärtat. Väl inne i förmakskammarna kan ballongen blåsas upp, läggas emot den felaktiga vävnaden och sedan fyllas med flytande kväveoxid som förångas och fryser vävnaden vilket isolerar strömmarna som ger upphov till den felaktiga hjärtrytmen. Målet med det här examensarbetet är att fästa flexibla kretskort på utsidan av dessa kryoballonger, vilka då ska kunna känna av fysisk kontakt med vävnaden och informera operatören om detta innan frysningen sker. Därmed bör sannolikheten för lyckad ablation öka. Tre prototyper tillverkades med polyuretanballonger, flexibla kretskort och ett biokompatibelt, flexibelt cyanoakrylatlim. Kretskorten arrangerades i olika mönster för respektive prototyper för att undersöka vilken konfiguration som skulle passa ändamålet bäst. Det visade sig att smala kretskort placerade längs med ballongen axiellt och jämnt utspridda längs med omkretsen gav bäst resultat. Däremot höll inte limmet så bra som förväntat vilket troligtvis handlar om användarfel vid limningen men en vidare utredning kan vara att önska för att säkerställa att limmet är kompatibelt med övriga material.

The outstanding electrical and mechanical properties of single-walled carbon nanotubes (SWCNTs) may offer solutions to realizing high-mobility and high-bendability thin-film transistors (TFTs) for the emerging flexible electronics. This thesis aims to develop low-cost ink-jet printing techniques for high-performance TFTs based on pristine SWCNTs. The main challenge of this work is to suppress the effects of “metallic SWCNT contamination” and improve the device electrical performance. To this end, this thesis entails a balance between experiments and simulations.   First, TFTs with low-density SWCNTs in the channel region are fabricated by utilizing standard silicon technology. Their electrical performance is investigated in terms of throughput, transfer characteristics, dimensional scaling and dependence on electrode metals. The demonstrated insensitivity of electrical performance to the electrode metals lifts constrains on choosing metal inks for ink-jet printing.   Second, Monte Carlo models on the basis of percolation theory have been established, and high-efficiency algorithms have been proposed for investigations of large-size stick systems in order to facilitate studies of TFTs with channel length up to 1000 times that of the SWCNTs. The Monte Carlo simulations have led to fundamental understanding on stick percolation, including high-precision percolation threshold, universal finite-size scaling function, and dependence of critical conductivity exponents on assignment of component resistance. They have further generated understanding of practical issues regarding heterogeneous percolation systems and the doping effects in SWCNT TFTs.   Third, Monte Carlo simulations are conducted to explore new device structures for performance improvement of SWCNT TFTs. In particular, a novel device structure featuring composite SWCNT networks in the channel is predicted by the simulation and subsequently confirmed experimentally by another research group. Through Monte Carlo simulations, the compatibility of previously-proposed long-strip-channel SWCNT TFTs with ink-jet printing has also been demonstrated.   Finally, relatively sophisticated ink-jet printing techniques have been developed for SWCNT TFTs with long-strip channels. This research spans from SWCNT ink formulation to device design and fabrication. SWCNT TFTs are finally ink-jet printed on both silicon wafers and flexible Kapton substrates with fairly high electrical performance. / QC 20100910

This thesis examines strategies to exploit existing materials and techniques to advance organic thin film transistor (OTFT) technology in device performance, device manufacture, and device integration. To enhance device performance, optimization of plasma enhanced chemical vapor deposited (PECVD) gate dielectric thin film and investigation of interface engineering methodologies are explored. To advance device manufacture, OTFT fabrication strategies are developed to enable organic circuit integration. Progress in device integration is achieved through demonstration of OTFT integration into functional circuits for applications such as active-matrix displays and radio frequency identification (RFID) tags. OTFT integration schemes featuring a tailored OTFT-compatible photolithography process and a hybrid photolithography-inkjet printing process are developed. They enable the fabrication of fully-patterned and fully-encapsulated OTFTs and circuits. Research on improving device performance of bottom-gate bottom-contact poly(3,3'''-dialkyl-quarter-thiophene) (PQT-12) OTFTs on PECVD silicon nitride (SiNx) gate dielectric leads to the following key conclusions: (a) increasing silicon content in SiNx gate dielectric leads to enhancement in field-effect mobility and on/off current ratio; (b) surface treatment of SiNx gate dielectric with a combination of O2 plasma and octyltrichlorosilane (OTS) self-assembled monolayer (SAM) delivers the best OTFT performance; (c) an optimal O2 plasma treatment duration exists for attaining highest field-effect mobility and is linked to a “turn-around” effect; and (d) surface treatment of the gold (Au) source/drain contacts by 1-octanethiol SAM limits mobility and should be omitted. There is a strong correlation between the electrical characteristics and the interfacial characteristics of OTFTs. In particular, the device mobility is influenced by the interplay of various interfacial mechanisms, including surface energy, surface roughness, and chemical composition. Finally, the collective knowledge from these investigations facilitates the integration of OTFTs into organic circuits, which is expected to contribute to the development of new generation of all-organic displays for communication devices and other pertinent applications. A major outcome of this work is that it provides an economical means for organic transistor and circuit integration, by enabling use of the well-established PECVD infrastructure, yet not compromising the performance of electronics.

This thesis examines strategies to exploit existing materials and techniques to advance organic thin film transistor (OTFT) technology in device performance, device manufacture, and device integration. To enhance device performance, optimization of plasma enhanced chemical vapor deposited (PECVD) gate dielectric thin film and investigation of interface engineering methodologies are explored. To advance device manufacture, OTFT fabrication strategies are developed to enable organic circuit integration. Progress in device integration is achieved through demonstration of OTFT integration into functional circuits for applications such as active-matrix displays and radio frequency identification (RFID) tags. OTFT integration schemes featuring a tailored OTFT-compatible photolithography process and a hybrid photolithography-inkjet printing process are developed. They enable the fabrication of fully-patterned and fully-encapsulated OTFTs and circuits. Research on improving device performance of bottom-gate bottom-contact poly(3,3'''-dialkyl-quarter-thiophene) (PQT-12) OTFTs on PECVD silicon nitride (SiNx) gate dielectric leads to the following key conclusions: (a) increasing silicon content in SiNx gate dielectric leads to enhancement in field-effect mobility and on/off current ratio; (b) surface treatment of SiNx gate dielectric with a combination of O2 plasma and octyltrichlorosilane (OTS) self-assembled monolayer (SAM) delivers the best OTFT performance; (c) an optimal O2 plasma treatment duration exists for attaining highest field-effect mobility and is linked to a “turn-around” effect; and (d) surface treatment of the gold (Au) source/drain contacts by 1-octanethiol SAM limits mobility and should be omitted. There is a strong correlation between the electrical characteristics and the interfacial characteristics of OTFTs. In particular, the device mobility is influenced by the interplay of various interfacial mechanisms, including surface energy, surface roughness, and chemical composition. Finally, the collective knowledge from these investigations facilitates the integration of OTFTs into organic circuits, which is expected to contribute to the development of new generation of all-organic displays for communication devices and other pertinent applications. A major outcome of this work is that it provides an economical means for organic transistor and circuit integration, by enabling use of the well-established PECVD infrastructure, yet not compromising the performance of electronics.

Inkjet-printing is a technology which has for the last decade been exploited to fabricate flexible RF components such as antennas and planar circuit elements. However, the limitations of feature size and single layer fabrication prevented the demonstration of compact, and high efficiency RF components operating above 10 GHz into the mm-Wave regime which is critical to silicon integration and fully-printed modules. To overcome these limitations, a novel vertically-integrated fully inkjet-printed process has been developed and characterized up to the mm-Wave regime which incorporates up to five highly conductive metal layers, variable thickness dielectric layers ranging from 200 nm to 200 um, and low resistance through-layer via interconnects. This vertically-integrated inkjet printed electronics process, tagged VIPRE, is a first of its kind, and is utilized to demonstrate fully additive RF capacitors, inductors, antennas, and RF sensors operating up to 40 GHz. In this work, the first-ever fully inkjet printed multi-layer RF devices operating up to 40 GHz with high-performance are demonstrated, along with a demonstration of the processing techniques which have enabled the printing of multi-layer RF structures with multiple metal layers, and dielectric layers which are orders of magnitude thicker than previoulsy demonstrated inkjet-printed structures. The results of this work show the new possibilities in utilizing inkjet printing for the post-processing of high-efficiency RF inductors, capacitors, and antennas and antenna arrays on top of silicon to reduce chip area requirements, and for the production of entirely printed wireless modules.

This thesis investigates inkjet printing of fully-integrated modules fabricated on organic substrates as a system-level solution for ultra-low-cost and eco-friendly mass production of wireless sensor modules. Prototypes are designed and implemented in both traditional FR-4 substrate and organic substrate. The prototype on organic substrate is referred to as a Smart Wireless Integrated Module (SWIM). Parallels are drawn between FR-4 manufacturing and inkjet printing technology, and recommendations are discussed to enable the potential of inkjet printing technology. Finally, this thesis presents novel applications of SWIM technology in the area of wearable and implantable electronics. Chapter 1 serves as an introduction to inkjet printing technology on organic substrates, wireless sensor networks (WSNs), and the requirements for low-power consumption, low-cost, and eco-friendly technology. Chapter 2 discusses the design of SWIM and its implementation using traditional manufacturing techniques on FR-4 substrate. Chapter 3 presents a benchmark prototype of SWIM on paper substrate. Challenges in the manufacturing process are addressed, and solutions are proposed which suggest future areas of research in inkjet printing technology. Chapter 4 presents novel applications of SWIM technology in the areas of implantable and wearable electronics. Chapter 5 concludes the thesis by discussing the importance of this work in creating a bridge between current inkjet printing technology and its future.

In this thesis, we present a graphical computer-aided design (CAD) environment for the design, analysis and layout of printed electronic batteries in the first phase and the parasitic extraction of the connecting wires in the second phase. The primary motivation of our work is that this prototyping software tool so far does not exist. Our tool has been integrated within the existing CAD tool which allows quick prototyping and simplifies the interface between the system designer and the device manufacturer. This tools supports the schematic and layout entry, rule checking and netlist generation. The first phase of the device synthesis modelling is based on Enfucell printed batteries, by which using the CAD tool, the shape of the battery is optimized and designed to fit the product and is able to simulate the performance during the optimization, whereas the second phase is the parasitic extraction using an extracting tool named fasthenry, which is integrated to our CAD tool to extract unwanted resistance and inductance within the shared wires between the battery and other devices. We believe that the availability of this tool is useful to the CAD community for novel ideas in the circuit design for flexible hybrid electronics. / +46764354255, +46722694942