No description available.

Silicone stands as an indispensable material for numerous applications; however, its high energy-cost synthesis poses significant environmental challenges. To address these concerns, bio-based silicone has gained considerable attention, showcasing its potential to dilute energy density while offering inherent functional benefits. Despite promising prospects, existing incorporation methods often involve protecting groups, rare metal catalysts, and multistep synthesis, which contradict green chemistry principles. The aza- Michael reaction emerges as a superior choice due to its high atom economy and mild reaction conditions. However, it still suffers from prolonged reaction times, hindering its overall efficiency and sustainability. This thesis utilizes self-activated beta-hydroxy acrylates to greatly enhance aza-Michael kinetics, achieving a 3-fold rate enhancement in solvent-free silicone synthesis. This fast aza-Michael reaction acts as the platform for the incorporation of Vitamin C and amino acids into silicone materials. Vitamin C-modified silicone demonstrates the potential for controlled antioxidant activity release, while amino acid-functionalized silicones are synthesized using choline amino acid ionic liquids, presenting a protecting-group-free and solvent-free synthesis method. Moreover, the synthesized choline amino acid-functional polymers and elastomers are investigated for their dielectric properties revealing promising potential for dielectric elastomer actuator applications. These innovative methods offer green alternatives for incorporating hydrophilic biomolecules into hydrophobic silicone systems, providing new functionalities that address both environmental and functional requirements. / Thesis / Doctor of Science (PhD)

No description available.

No description available.

No description available.

No description available.

<p>Adhesives  are  found  in  almost  every  aspect  of  the  modern  world.  They  are  found  in plywood used in buildings, electronics, shoes, plumbing and in almost every facet of your daily life. Nature also has an abundance of these adhesives that are used fora multitude of applications. Some  animals, like  the  blue  mussel, use  their  adhesive  for  protection  against  ocean  waves  and predators  while other animals, such  as  the  spider, use  it  to  trap  prey. Investigation  of  theses adhesives has led to the identification of several different proteins that allow for these animals to make  their  adhesive.  Some  of  them  are  composed of rare  amino  acids that  while  other  animals use  a combination  of  inorganic  and  organic  components.  Understanding  of  these  unique adhesives  can be  a  boon  for designof future  adhesives  that  do  not  have  the disadvantagesof current day commercialized glues.</p> <p>Increasing interest  in  the  restoration  of  natural  oyster  reefs  and  the  cement  that  holds them  together  has  resulted  in  the  identification  of  the  Shelk2  protein  that  is  found  both  in  the mantle  of  the  oyster’s  shell  as  well  as  the  cement  that  holds  the  reefs  together. Gaining  an understanding  of  how  this  protein  functions  and  its  part  in  the  oyster  reef  could  be  quite beneficial  for  projects  investing  in  reef  restorations  as  well  as  underwater  adhesion.  Gathering protein  from  the  animal  for  experimentation  and  characterization  can  be  labor  intensive  and extremely challenging. Luckily, cloning technology has become a useful tool for the expression of large quantities of proteins that can be difficult or impossible to gather from the native animal. Using <em>E. coli</em>, it  is  possible  to design  and express  this protein  in  hopes  of  gaining  a  better understanding of its impact on oyster settlement and adhesion.</p> <p>Sustainability is a major downside to current day adhesives that current technologies have not  been  able  to  solve. Most adhesives  that  are  on  the  market  today  are  primarily  derived  from petroleum. Current  research  has  begun  investigating  alternatives  to  the  large   epoxy   and formaldehyde  adhesive  market,  but  the  barrier  of  entry  is  hard  to  overcome.  To  replace  these glues  the  new  material  must  be  affordable,  non-petroleum  derived,  and  available  on  a  massive scale.  These  requirements  are  hard  to  meet  for  many  materials  and  due  to  that  the  current  bio-adhesive are generally very low strength.</p> <p>The work presented here will detail the characterization, and expression of some of these natural  adhesives that  have  been  found  in  the  Eastern  oyster. Another  aspect of  this  work includes the synthesis of a new bio-based adhesive system. Utilizing biomimetic chemistry along with  sustainably  sourced  materials  a  new  adhesive  has  been  formulated that  has  comparable adhesive strength to current day commercial adhesives.</p>

This dissertation focuses on the assessment and development of heterogeneous catalysts for the deperoxidation of cyclohexyl hydroperoxide and oxidation of cyclohexane, which will be based in metal oxides and gold nanoparticles. For this endeavour a multidisciplinary approach will be used combining theoretical chemistry, kinetic studies and synthesis and characterisation of materials. The starting choice for the catalyst to carry out the process is supported gold nanoparticles. The approach of this dissertation is to first model the mecha- nism of cyclohexyl hydroperoxide decomposition and oxidation of cyclohexane on gold nanoparticles by theoretical calculations, and use these findings to synthesise efficient heterogeneous catalysts which will be subsequently tested and optimised experimentally. But as it will be seen, some metal oxides are active rather than acting as mere supports, which will also be studied both theoretical and experimentally. Each chapter has a specific focus and constitutes a strand of the overall goal: Chapter 1 provides an introductory background on the topics that this dissertation lies upon: oxidation of cyclohexane, heterogeneous catalysis and catalysis by gold and metal oxides. Chapter 2 outlines the objectives of the thesis, formulating the relevant hypotheses of this research and the subsequent validation tests. Chapter 3 exposes the methodology with a brief conceptual background that has been used to carry out this work. Chapter 4 is the first chapter dealing with results. It consists in a theoretical study using density functional theory of the reaction mechanism over different models of gold nanoparticles, in order to study the influence of several parameters on their catalytic activity: the particle size, atom coordination, and presence of additional species like oxygen atoms and water. Chapter 5 uses the findings found in chapter 4 to drive the synthesis of supported gold nanoparticles. It consists in a experimental study of gold-based catalysts, which is combined with a theoretical study which takes into account an additional variable: the support. Chapter 6 exploits one of the findings of chapter 5. One of the supports used for anchoring the gold nanoparticles is active by itself, namely cerium oxide. This chapter comprises an experimental work about its activity, studying parameters like particle size, morphology and the effect of doping. Chapter 7 continues with the catalytic activity of cerium oxide-based materials, but now from a theoretical point of view. It first presents a systematic study of the parameters relevant for the proper quantum mechanical description of cerium oxide, which is followed by a mechanistic study on different models. Chapter 8 outlines the conclusions obtained in this dissertation, present- ing them in a summarised way. Even though each chapter presents its corresponding conclusions at its end, this chapter groups them all in a structured way for the reader's convenience, so a global view of the project can be swiftly grasped. The results herein further the knowledge of heterogeneous catalysis for the oxidation of cyclohexane, one of the most important industrial reactions, and which continues to be a challenge. Although the ultimate goal is to develop an industrial catalyst, the dissertation also aims to show how computational chemistry can drive the design of novel materials, and how it can help to understand catalytic reactions at the atomic level. / El presente trabajo se centra en el estudio y desarrollo de catalizadores heterogéneos para la desperoxidación de ciclohexil hidroperóxido y la oxidación de ciclohexano, basados en óxidos metálicos y nanopartículas de Au. Para lograr tal objetivo se ha usado un enfoque multidisciplinar, que combina química teórica y estudios cinéticos, a la vez que síntesis y caracterización de materiales. El candidato inicial para llevar a cabo el proceso consiste en partículas de Au soportadas. El camino a seguir pasa primero por modelizar el mecanismo de descomposición de ciclohexil hidroperóxido y oxidación de ciclohexano mediante cálculos teóricos, y utilizar el conocimiento generado por este estudio para dictar la síntesis de catalizadores heterogéneos, comprobando y optimizando posteriormente su actividad de forma experimental. Sin embargo, como será visto a lo largo de este trabajo, algunos óxidos metálicos dejan de lado su papel como mero soporte físico para las partículas de Au y son activos por sí mismos. Tal hecho será estudiado tanto teórica como experimentalmente. Cada capítulo tiene un objetivo específico, y es a su vez una parte del objetivo global de esta investigación: El capítulo 1 provee al lector de una breve introducción a los temas sobre los que yace este trabajo: oxidación de ciclohexano, catálisis heterogénea y catálisis mediante Au y óxidos metálicos. El capítulo 2 expone de una forma breve y concisa los objetivos de esta investigación, formulando la hipótesis de partida y los correspondientes experimentos para su validación. El capítulo 3 describe la metodología utilizada junto a una explicación de los fundamentos en los que se basa cada técnica. El capítulo 4 es el primer capítulo que discute los resultados obtenidos en esta investigación. Se trata de un estudio usando la teoria del funcional de densidad para investigar el mecanismo de reacción del proceso sobre diferentes modelos teóricos de Au, con el objetivo de comprender la influencia de diversos factores en la actividad catalítica, tales como el tamaño de partícula, la coordinación de los á'tomos de Au y la presencia de especies adicionales como átomos de O y agua. El capítulo 5 hace uso de los resultados obtenidos en el estudio anterior, y los utiliza para dirigir la síntesis de nanopartículas soportadas de Au. Se trata de un estudio experimental en el que se investigan diversos factores que pueden afectar a su actividad catalítica. Este estudio se combina a su vez con uno de tipo teórico en el que se tiene en cuenta la influencia del soporte en la actividad catalítica de las particulas de Au. El capítulo 6 se basa en uno de los resultados obtenidos en el capítulo 5. Uno de los soportes utilizados para anclar las partículas de Au resulta de por sí activo: el CeO2. Su notable actividad para catalizar este proceso exige un estudio en mayor profundidad, el cual se lleva a cabo en este capítulo. Parámetros como el tamaño de particula, la morfología de superficie y el dopaje entre otros se investigan en este punto. El capítulo 7 sigue la estela del trabajo anterior sobre CeO2, pero ahora desde el punto de vista de la química teórica. Presenta primero un estudio sistemático de parámetros relacionados con la mecánica cuá'ntica que afectan al CeO2, con el objetivo de alcanzar una descripción satisfactoria de los modelos teóricos para este óxido. Tras esto, se lleva a cabo un estudio del mecanismo de reacción en dichos modelos de CeO2, a fin de comprender el origen de su actividad catalítica. El capítulo 8 presenta de forma estructurada y concisa todas las conclusiones que se han sacado a raíz de los resultados obtenidos. Aún a pesar de que cada capítulo presenta sus correspondientes conclusiones al final, aquí se presentan de una forma agrupada a comodidad del lector, para que pueda obtener de forma ágil una visión global de los resultados de esta investigación. / Aquest treball es centra en l'estudi i desenvolupament de catalitzadors hetero- genis per a la desperoxidació de ciclohexil hidroperòxid i la oxidació de ciclohexà, basats en òxids metàl·lics i nanopartícules de Au. Per aconseguir aquest objectiu s'ha utilitzat un enfocament multidisciplinari, en el qual es combinen química teòrica i estudis cinètics amb síntesi i caracterització de materials. El candidat inicial per dur a terme el procés consisteix en partícules de Au suportades. El camí a seguir passa primer per modelitzar el mecanisme de descomposició del ciclohexil hidroperòxid i la oxidació de ciclohexà mitjançant càlculs teòrics, i utilitzar el coneixement generat per aquest estudi per dirigir la síntesi de catalitzadors heterogenis, comprovant i optimitzant posteriorment la seua activitat de forma experimental. No obstant això, com es veurà al llarg d'aquest treball, alguns òxids metàl·lics deixen de costat el seu paper com a suport físic de les partícules de Au y són actius per si mateixos. Aquest fet s'ha estudiat tant teòrica com experimentalment. Cada capítol té un objectiu específic i és al mateix temps una part de l'objectiu global d'aquesta recerca: El capítol 1 proporciona al lector una breu introducció als temes tractats en aquest treball: oxidació de ciclohexà, catàlisi heterogènia i catàlisi mitjançant Au i òxids metàl·lics. El capítol 2 exposa d'una forma breu i concisa els objectius d'aquesta investigació, formulant la hipòtesi inicial i els corresponents experiments per a la seua validació. El capítol 3 descriu la metodologia utilitzada conjuntament amb una explicació dels fonaments en els quals es basa cada tècnica. El capítol 4 és el primer capítol que discuteix els resultats obtinguts en aquesta investigació. Es tracta d'un estudi usant la teoria del funcional de densitat per investigar el mecanisme de reacció del procés en diferents models teòrics de Au, amb l'objectiu de comprendre la influència en l'activitat catalítica de diversos factors, com ara la grandària de partícula, la coordinació dels àtoms de Au i la presencia d'espècies addicionals, com àtoms de O i aigua. El capítol 5 fa ús dels resultats obtinguts en l'estudi anterior, i els utilitza per dirigir la síntesi de nanopartícules suportades de Au. Es tracta d'un estudi experimental en el qual s'investiguen diversos factors que poden afectar a la seua activitat catalítica. Aquest estudi es combina amb un altre de caràcter teòric en el qual es té en compte la influència del suport en la activitat catalítica de les partícules de Au. El capítol 6 es basa en un dels resultats obtinguts en el capítol 5. Un dels suports utilitzats per fixar les partícules de Au resulta de per si actiu: el CeO2. La seua notable activitat per catalitzar aquest procés demana un estudi de major profunditat, el qual es duu a terme en aquest capítol. Paràmetres com la grandària de partícula, la morfologia de superfície i el dopatge, entre altres, s'investiguen en aquest punt. El capítol 7 continua l'estudi anterior sobre el CeO2, però ara des del punt de vista de la química teòrica. Presenta en primer lloc un es- tudi sistemàtic de paràmetres relacionats amb la mecànica quàntica que afecten al CeO2, amb l'objectiu d'aconseguir una descripció satisfactòria pels models teòrics d'aquest òxid. Després, es duu a terme un estudi del mecanisme de reacció en aquests models de CeO2, a fi de com- prendre l'origen de la seua activitat catalítica. El capítol 8 presenta de forma estructurada i concisa totes les conclusions que s'han extret arran dels resultats obtinguts. Encara que cada capí- tol presenta les seues corresponents conclusions al final, ací es presenten d'una forma agrupada per a la comoditat del lector, per què puga obtindre de forma àgil una visió global dels result d'una forma agrupada per a la comoditat del lector, per què puga obtindre de forma à / López Auséns, JT. (2016). From Quantum Mechanics to Catalysis: Studies on the oxidation of alkanes by gold and metal oxides [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/76806

<p dir="ltr">Reported herein is a brief summary regarding the previous syntheses of borane-amines, newly developed protocols to synthesize borane-amines, and the material and synthetic applications utilizing borane-amines. Methods to generate borane-amines typically relied on a metathesis-dehydrogenation reaction between ammonium salts and metal borohydrides in organic solvent, typically hazardous tetrahydrofuran (THF). However, due to the poor solubility of inorganic salts in organic solvent, stirring of the reaction mixture becomes difficult and, in turn, scalability is made challenging. We report two new methods to generate borane-amines that both rely on the hydroboration of sodium borohydride and a carbonyl activator, followed by the S_N2-type reaction with the amine to form the requisite borane-amine. The activator for our procedures are either 1) gaseous carbon dioxide or 2) water/ethyl acetate system. The CO₂ mediated protocol was applied to a variety of 1°-, 2°-, 3°-, and heteroaromatic amines as well as phosphines to form the corresponding borane adducts (73-99%). Water was also found to be a green, compatible activator. Interestingly, we had swapped environmentally and health hazardous THF with ethyl acetate (EtOAc) and found the reaction had still proceeded with competitive conversion of amines to the borane-amines (72-97%). The robustness of this reaction was demonstrated with a 1.1 mol scale synthesis of borane pyridine with 87% yield. With increased accessibility of borane-amines established, we sought to investigate their potential applications, including testing their hypergolic properties. Additionally, we utilized borane-ammonia for a sequential reduction/Friedel-Crafts alkylation of benzyl carbonyls. Traditionally an alkyl halide, the scope of the electrophilic aromatic substitution reaction has widened to include alcohols and carbonyls as potential Friedel-Crafts reactants. Few reports exist for the arylation of aldehydes and ketones, while no precedence exists for the arylation of carboxylic acids and esters. Our group previously reported that TiCl₄ is capable of eliminating oxygen from benzyl alcohols, forming a carbocation intermediate. Theoretically, the carbocation formed from TiCl₄ and benzyl alcohols would be vulnerable from attacks from other nucleophiles, including pi bonds from arenes. This was indeed proven to be the case when benzyl alcohol was reacted in 1 equiv. TiCl₄with benzene as the solvent and diphenylmethane was obtained as the sole product. By including borane-ammonia as a hydride source, various aryl carbonyls and aryl carbinols were also reduced to the corresponding alcohol <i>in situ</i>, enabling these substrates to participate in Friedel-Crafts alkylation.</p>

<p dir="ltr">Aromatic phosphonates and phosphine oxides are highly desirable synthetic targets used in pharmaceuticals, natural products, agrichemicals, catalysis, and materials science. While a variety of aromatic precursors have been used to access these motifs, aryl halides remain one of the most desirable coupling partners owing to their low cost, commercial availability, and regioselective reactivity. Traditional phosphonation often requires the use of harsh reductants in the presence of liquid ammonia, which are caustic and pose incredible environmental concerns. Milder, transition metal-catalyzed approaches have been developed, but can be limited by air sensitivity, cost, low reaction selectivity, and low functional group compatibility. Photoredox catalysis has been significantly advanced in the past decade in the pursuit of greener, more sustainable avenues to facilitate desirable reaction transformations under mild conditions. These methods most commonly use a dual catalytic strategy in which a metal is paired with an organocatalyst. While these approaches enable facile phosphonation of a variety of aromatic precursors, the metals and organocatalysts used are often expensive and toxic. Indeed, there remains unexplored chemical space for transition metal-free photoredox-catalyzed aryl C-P bond formations. Herein, we present a series of transition metal-free, photoredox-catalyzed approaches to the phosphonation of aryl halides. The approaches and mechanistic works will be discussed in the following order: </p><p dir="ltr">First, the discovery that 10<i>H</i>-phenothiazine (PTZ) enables the transition metal-free phosphonation of aryl halides using trialkyl phosphites will be presented. PTZ serves as a photocatalyst capable of reducing the aryl halide to access aryl radicals, which readily couple with phosphite esters. This transformation exhibits broad functional group tolerance in good to excellent yields. Then, photoredox catalysis by PTZ enables the formation of unsymmetrical aromatic phosphine oxides using triphenylphosphine (PPh₃) and aryl halides. This is the first work in which PPh₃ has been used as the starting material, and the reaction proceeds via the alkaline hydrolysis of quaternary phosphonium salts. The final work exhibits novel photocatalytic activity of <i>N</i>-heterocyclic carbenes (NHC) to activate aryl halides, form aryl radicals, and enable phosphonation. This method displays broad functional group tolerance under mild conditions and highlights its untapped synthetic utility as a photocatalyst.</p>