No description available.

Carbon Dioxide (CO2) is a major fermentation product generated during the production of beer, the subsequent release of this gas within the fermentor results in agitation that is necessary for sustained industrial fermentation. CO2 is sometimes monitored allowing brewers to stoichiometrically relate CO2 released to other products. In this manner the rate of gas release from the fermentor may be used to assess, control and predict other aspects of fermentation. The dynamics of CO2 generation, transport and release are explored throughout this thesis over several studies. The tools used to examine CO2 production were scrutinized including a miniature assay using various modeling techniques. A miniature scale fermentation assay included in the methods of the American Society of Brewing Chemists was compared to industrial scale fermentations. It was found that discrepancies were possibly due (at least in part) to fermentor geometry. Following this study, a literature review of CO2 solubility in aqueous sugar, and ethanol solutions was conducted. This study exposed previously undescribed inaccuracies in literature, i.e., it was found that several gas solubility tables were empirical derived and are therefore unlikely to accurately reflect all styles of beer. The next study scrutinized the consumption of sugars during barley fermentation and found that these fermentations often exhibit asymmetric sigmoidal attenuation. A five parameter logistic model was introduced to model this sugar consumption more accurately than previously described techniques. Using methods refined during the aforementioned studies, a fermentation was conducted where a mass balance was used to track all major fermentation parameters (the consumption of individual sugars, and the production of ethanol, carbon dioxide, yeast biomass and glycerol). This allowed an assessment of Balling’s theorem as compared to modern theory. It was shown that while accurate in predicting original extract, Balling’s theorem incorrectly quantified other fermentation parameters. This has large ramifications for both industry and research as the estimation of fermentation parameters (such as ethanol and fermentation time) is now better understood. From these studies, the production of beer becomes less of a “black box” operation, and CO2 saturation, transport and release can be better explained. Of the many fermentation aspects monitored during these studies, most were predicted by theory, however, there were notable exceptions. For instance, it was found that both the inhibition of maltose consumption and yeast sugar consumption dynamics (which remained relatively constant throughout the fermentation at ~ 50 pg·h-1 for cells with an average mass of ~ 40 pg). were found to deviate from previously described reports. These, and other findings improve our understanding of brewing fermentations allowing for additional applications of theory and recommendations in industrial operations.

The objective of this research is to develop a system capable of simulating snow depth and snow water equivalent in the Sherbrooke to Mount-Megantic area of Quebec's Eastern Townships using meteorological and digital terrain data as input.The working hypothesis is that meteorological data may drive a point energy and mass balance snow cover model.The model used was developed by the Hydrologic Research Lab (National Weather Service) which was calibrated for local conditions using field data collected during two winters at several sites on Mount-Megantic. Snow water equivalent and depth are used for calibration and validation of the model. Automated snow sensors were also used to obtain temperature calibration data.The snow surveys and correction of the air temperature for elevation improves the estimates of snow depth and water equivalent.The results suggest that data from the Sherbrooke meteorological stations can be used to estimate the snow cover over the area of Eastern Townships. Air temperature extrapolation across the field area is a challenge. However the simulated snow cover conforms generally well with data observed at several stations throughout the region.

Portland Cement pervious concrete's ability to permit water infiltration has encouraged its use as a stormwater management tool. However, the material has suffered historically poor support due to a number of factors, including failures due to poor mix design and improper construction techniques, concern about lesser structural strength, concern about poor long term performance due to clogging of surface pores and undefined credit for stormwater management. This study focuses on long term performances of pervious concrete parking lots and their stormwater management credit. Before stormwater management credit could be estimated, it was necessary to develop a testing device to gather information from existing pervious concrete parking lots currently in use. Eight parking lots were examined to determine the infiltration rates of the pervious concrete, as well as to verify the soil makeup beneath pavement. A total of 30 cores were extracted from pervious concrete parking lots and evaluated for infiltration rates. Three of the sites had a pervious concrete section that included a gravel reservoir. Infiltration rates were measured using the application of an embedded single-ring infiltrometer. In an attempt to provide an estimate of credit, a mass balance model was created to be used for simulation of the hydrologic and hydraulic function of pervious concrete sections. The purpose of the model is to predict runoff and recharge volumes for different rainfall conditions and hydraulic properties of the concrete and the soil. The field derived hydraulic data were used to simulate infiltration volumes and rainfall excess given a year of rainfall as used in a mass balance operated within a spreadsheet. The results can be used for assessing stormwater management credit.

Ce mémoire a comme objectif de présenter une revue de la littérature et une analyse comparative des différents modèles existants pour le calcul de la capacité de support d’un plan d’eau aux apports en phosphore. Ce document a aussi pour but d’évaluer les différentes options pour l’utilisation de ce genre d’outil au Québec, ainsi que d’amorcer une réflexion sur les applications possibles de ce concept au niveau local, en lien avec l’aménagement du territoire des bassins versants. L’analyse comparative des modèles théoriques, combinée à la réflexion d’acteurs clés impliqués actuellement dans un processus qui consiste à tester leur utilisation dans les Laurentides au Québec, a permis de mettre en relief l’importance de calibrer les modèles régionalement. De plus, certains avantages semblent résider dans l’utilisation d’un modèle de nature empirique afin d’effectuer les prédictions sur les apports naturels et totaux en phosphore pour les lacs de cette région. Par contre, l’utilisation d’une approche de type « bilan de masse », s’avère tout de même indispensable afin de relativiser l’importance des différents apports anthropiques en phosphore du bassin versant. Dans l’avenir, l’utilisation de tels modèles permettra possiblement de justifier certaines mesures restrictives au développement des bassins versants, qui pourront s’insérer parmi les outils d’urbanisme actuels. Ce sont principalement les municipalités qui détiennent les pouvoirs nécessaires afin d’intégrer les prescriptions découlant de ce genre d’analyse à l’aménagement du territoire des bassins versants. Plusieurs outils d’urbanisme, tels que les plans d’aménagement d’ensemble (PAE) ou bien les règlements de zonage et de lotissement, semblent donner assez de latitude afin de permettre aux municipalités d’intervenir en ce sens. Toutefois, les modèles de capacité de support ne pourront pas être utilisés afin de calculer un nombre précis d’habitations qu’il est possible de construire dans le bassin versant d’un lac. / This study presents a literature review of current carrying capacity models developed in Ontario and Quebec (Canada) for the estimation of phosphorus (P) loading in lakes. Another objective is to evaluate their applications to land and watershed management practices in Quebec. A comparison of theoretical and empirical models, combined with the observations of keys stakeholders, confirms the importance of calibrating models regionally. The analysis further reveals that empirical models estimate more accurately P concentrations in lakes. However, the use of traditional mass balance approaches is still a necessity for the estimation of different P sources in the watershed. These models can support decision makers and land managers in Quebec in the application of more restrictive measures in lakes where the carrying capacity is currently exceeded. In Quebec, the use of the models and their implementation in the legislation will be a municipal responsibility. Many urbanism tools already allow this kind of intervention (zoning, « outils à caractère discrétionnaire »). But, model use alone will not be sufficient to justify a total interdiction of land development in a watershed or to impose a strict limit to house and cottage development.

Ce mémoire a comme objectif de présenter une revue de la littérature et une analyse comparative des différents modèles existants pour le calcul de la capacité de support d’un plan d’eau aux apports en phosphore. Ce document a aussi pour but d’évaluer les différentes options pour l’utilisation de ce genre d’outil au Québec, ainsi que d’amorcer une réflexion sur les applications possibles de ce concept au niveau local, en lien avec l’aménagement du territoire des bassins versants. L’analyse comparative des modèles théoriques, combinée à la réflexion d’acteurs clés impliqués actuellement dans un processus qui consiste à tester leur utilisation dans les Laurentides au Québec, a permis de mettre en relief l’importance de calibrer les modèles régionalement. De plus, certains avantages semblent résider dans l’utilisation d’un modèle de nature empirique afin d’effectuer les prédictions sur les apports naturels et totaux en phosphore pour les lacs de cette région. Par contre, l’utilisation d’une approche de type « bilan de masse », s’avère tout de même indispensable afin de relativiser l’importance des différents apports anthropiques en phosphore du bassin versant. Dans l’avenir, l’utilisation de tels modèles permettra possiblement de justifier certaines mesures restrictives au développement des bassins versants, qui pourront s’insérer parmi les outils d’urbanisme actuels. Ce sont principalement les municipalités qui détiennent les pouvoirs nécessaires afin d’intégrer les prescriptions découlant de ce genre d’analyse à l’aménagement du territoire des bassins versants. Plusieurs outils d’urbanisme, tels que les plans d’aménagement d’ensemble (PAE) ou bien les règlements de zonage et de lotissement, semblent donner assez de latitude afin de permettre aux municipalités d’intervenir en ce sens. Toutefois, les modèles de capacité de support ne pourront pas être utilisés afin de calculer un nombre précis d’habitations qu’il est possible de construire dans le bassin versant d’un lac. / This study presents a literature review of current carrying capacity models developed in Ontario and Quebec (Canada) for the estimation of phosphorus (P) loading in lakes. Another objective is to evaluate their applications to land and watershed management practices in Quebec. A comparison of theoretical and empirical models, combined with the observations of keys stakeholders, confirms the importance of calibrating models regionally. The analysis further reveals that empirical models estimate more accurately P concentrations in lakes. However, the use of traditional mass balance approaches is still a necessity for the estimation of different P sources in the watershed. These models can support decision makers and land managers in Quebec in the application of more restrictive measures in lakes where the carrying capacity is currently exceeded. In Quebec, the use of the models and their implementation in the legislation will be a municipal responsibility. Many urbanism tools already allow this kind of intervention (zoning, « outils à caractère discrétionnaire »). But, model use alone will not be sufficient to justify a total interdiction of land development in a watershed or to impose a strict limit to house and cottage development.

This thesis focused on the modelling of a pulping process. The purpose was to see if an accurate model can be crated based on relatively simple premises and if the errors can be identified or analysed. To realise this, the authors conducted a literature study to identify the current state of the art regarding the chemical pulping process. In addition, flow charts and sample data from a case study were examined. Based on the literature review and case study, model assumptions were derived. The model is divided into sixteen components. Where mixing occurs, lumped conditions are assumed. The model has five validation points, four of which are temperatures and a mass flowrate. These are shown as deviations from the measured values. In conclusions, it was the model could produce stable results over a narrow time frame. More so if the transition period at the start of the simulation is overlooked. Several new model assumptions are presented with the purpose to increase accuracy e.g. account for the components ability to store mass.

[pt] O mercúrio usado no garimpo do ouro na região amazônica é liberado para a atmosfera, solo e rios. Uma vez na atmosfera, o metal é oxidado e imediatamente se deposita. Na água, ocorre a transformação para o metilmercúrio principalmente pela ação de microrganismos. A formação do metilmercúrio aumenta a dispersão e biodisponibilidade do elemento no ambiente aquático. O metilmercúrio pode ser incorporado pelo plancton entrando, assim, na cadeia alimentar. A concentração do metal aumenta a medida que se ascende nos níveis tróficos da cadeia, atingindo os valores mais elevados em peixes carnívoros como o tucunaré. Dessa forma, as emissões de mercúrio provocam a contaminação dos recursos naturais e aumentam os riscos para a saúde dos consumidores habituais de pescado. O objetivo deste trabalho é testar um modelo de bioacumulação de mercúrio em peixes para estimar concentrações em predadores de topo da cadeia alimentar. O modelo pode ser usado como ferramenta para a gestão ambiental de ecossistemas aquáticos potencialmente contaminados com mercúrio. Este objetivo foi atingido através da combinação dos modelos de balanço de massa de Trudel e bioenergético de Wisconsin, aplicados em espécies tropicais do gênero Cichla (tucunaré) da bacia do rio Tapajós. O modelo bioenergético de Wisconsin foi usado para determinar as taxas de consumo de alimento a partir de dados de crescimento estimados. Os parâmetros usados nos modelos foram obtidos na literatura. A habilidade da modelagem na predição dos teores de mercúrio em tucunarés foi avaliada através da comparação com dados de campo obtidos nos anos 1992 e 2001, no rio Tapajós e no sistema de lagos Maicá. Os melhores resultados foram alcançados para os espécimes coletados no ano 1992, o que parece estar relacionado com uma melhor estimativa da concentração de mercúrio no alimento neste ano. / [en] The mercury used in the artisanal mining (garimpo) of gold in the Amazon region is emitted to the atmosphere, soil and rivers. Once in the atmosphere, the metal is oxidized and immediately deposited. In the water, the transformation to methylmercury takes place mostly due to the action of microorganisms. The formation of methylmercury increases the dispersion and bioavailability of the element in the aquatic environment. The methylmercury can be assimilated by the plankton and enters the food chain. The concentration of the metal increases further up in the trophic levels of the chain and reaches the highest values in carnivorous fishes like tucunaré. Thus, the mercury emissions cause the contamination of natural resources and enhance the risks to the health of regular fish consumers. The objective of this work is to test a model for bioaccumulation of mercury in fishes. The model calculates concentrations in top predators of the food chain and can be used as a tool for the management of aquatic ecosystems potentially contaminated with mercury. This objective was accomplished through the combination of the Trudel mass balance and Wisconsin bioenergetics models, applied to tropical species of the Cichla (tucunaré) genre of the Tapajós river basin. The Wisconsin bioenergetics model was utilized to determine the rates of food consumption from estimated fish growth data. The parameters used in the models were found in the literature. The ability of the models to predict mercury contents in tucunarés was evaluated by comparison with the field data, obtained in 1992 and 2001, in the Tapajós River and in the Maicá lakes. The best results were attain ed for specimens collected in 1992 what seems to be related to a better estimate of mercury concentration in the food in this year.

[pt] Os modelos de balanço de massa servem como ferramenta para compreender e/ou quantificar o comportamento e destino de compostos químicos no meio ambiente, através dos diferentes compartimentos ambientais. Estes têm como finalidade principal a obtenção de um panorama geral e observação das conexões entre diversos fatores que impactam na concentração, no transporte e na transformação de compostos químicos. A Lagoa Rodrigo de Freitas e o Complexo Lagunar de Jacarepaguá, no Rio de Janeiro, são regiões costeiras que funcionam como bacias de acumulação sofrendo constantemente com problemas relacionados à poluição, por estarem situadas em regiões de alta urbanização, densidade demográfica e fluxo de veículos. Trabalhos de monitoramento realizados nas regiões apontam que as lagoas apresentam concentrações elevadas de metais, que quando liberados no meio ambiente tendem a se distribuir e acumular em diferentes compartimentos, bióticos e abióticos. Estes contaminantes apresentam persistência ambiental, estão frequentemente biodisponíveis no compartimento aquático e muitas vezes levam a efeitos tóxicos, tanto para a biota exposta quanto para os humanos. Todavia algumas regiões são de difícil monitoramento devido a questões logísticas e financeiras, e o uso desse tipo de modelagem vêm sendo empregada como uma ferramenta interessante. Neste contexto, o presente trabalho descreve os resultados da modelagem ambiental, tendo a aquivalência como critério de equilíbrio, na análise do destino e transporte de diferentes metais nas duas regiões supracitadas, através da estimativa e discussão das taxas de fluxos, regiões de acúmulo, variações locais e graus de complexidade dos modelos. Os resultados indicam que, em ambos os casos, houve um bom ajuste dos modelos para a realidade local. Na Lagoa Rodrigo de Freitas a maior remoção de metais ocorreu através do ar (89,88 por cento). Água e sedimento (49,11 por cento) foram as regiões que mais trocaram metais, sendo também a poeira urbana uma importante fonte de troca. Sedimento, poeira urbana e emissões diretas no meio aquático contribuíram mais significativamente para o transporte de metais para a água (maior 75 por cento). Na Lagoa de Jacarepaguá a maior remoção de metais ocorreu através do ar (49,36 por cento) e soterramento (28,42 por cento). A advecção do ar (49,39 por cento) e da água (44,68 por cento) foram as maiores vias de remoção de metais na Lagoa da Tijuca, enquanto na Lagoa de Marapendi a remoção se deu quase exclusivamente através da advecção no ar. A advecção da água e o sedimento foram as principais fontes de metais para as águas das Lagoas de Jacarepaguá e Tijuca, enquanto o ar foi o responsável por grande parte desse aporte na Lagoa de Marapendi, sendo justificado pela configuração espacial das lagoas e as premissas adotadas no modelo. As regiões com maior tendência de acúmulo de metais foram o sedimento, o solo e a poeira urbana. O maior grau de complexidade do modelo em comparação a um modelo mais simplificado e a maior quantidade/confiabilidade dos dados ambientais aumentaram a precisão das predições do modelo. Estes resultados certificam o uso desse tipo de modelagem como ferramenta auxiliar no controle, classificação e avaliação de risco e tomada de decisões pelos órgãos competentes. / [en] Mass balance models serve as a tool to understand and/or quantify the behavior and fate of chemical compounds in the environment, across different environmental compartments. These have as main purpose to obtain an overview and observation of the connections between different factors that impact the concentration, transport, and transformation of chemical compounds. The Rodrigo de Freitas lagoon and the Jacarepaguá lagoonal complex, in Rio de Janeiro, are coastal regions that function as accumulation basins, constantly suffering from problems related to pollution, as they are located in regions of high urbanization, demographic density and vehicles flow. Monitoring work carried out in the regions indicates that the lagoons have high concentrations of metals, which when released into the environment tend to be distributed and accumulated in different compartments, biotic and abiotic. These contaminants have environmental persistence, are often bioavailable in the aquatic compartment, and often lead to toxic effects, both for exposed biota and for humans. However, some regions are difficult to monitor due to logistical and financial issues, and the use of this type of modeling has been used as an interesting tool. In this context, the present work describes the results of the environmental modeling, having aquivalence as a balance criterion, in the analysis of the destination and transport of different metals in the two aforementioned regions, through the estimation and discussion of the flow rates, accumulation regions, local variations and degrees of complexity of the models. The results indicate that, in both cases, there was a good adjustment of the models to the local reality. In Rodrigo de Freitas lagoon, the highest removal of metals occurred through air (89.88 per cent). Water and sediment (49.11 per cent) were the regions that most exchanged metals, with road dust also being and important source of exchange. Sediment, road dust, and direct emissions into aquatic environment contributed most significantly to the transport of metals into water (more than 75 per cent). In the Jacarepaguá lagoon, the highest metal removal occurred through air (49.36 per cent) and burial (28.42 per cent). Air (49.39 per cent) and water (44.68 per cent) advection were the major means of metal removal in the Tijuca lagoon, while in the Marapendi lagoon removal occurred almost exclusively through air advection. The advection in water and sediment were the main sources of metals for the waters of the Jacarepaguá and Tijuca lagoons, while the air was responsible for a large part of this contribution in the Marapendi lagoon, being justified by the spatial configuration of the lagoons and the assumptions adopted in the model. The regions with the greatest tendency for metal accumulation were sediment, soil and road dust. The greater degree of complexity of the model compared to a more simplified model and the greater quantity/reliability of the environmental data increased the accuracy of the model s predictions. These results certify the use of this type of modeling as an auxiliary tool in the control, classification and risk assessment, and decision-making by the competent agencies.

[Truncated abstract] Removal of consumers through fishing has been shown to influence ecosystem structure and function by changing the biomass and composition of organisms occupying lower trophic levels. The western rock lobster (Panurilus cygnus), an abundant consumer along the temperate west coast of Australia, forms the basis of Australia's largest single species fishery, with catches frequently exceeding 11000 tonnes annually. Despite their high abundance and commercial importance, the diet and trophic role of adult lobster populations in deep-coastal-ecosystems (35-60 m) remains unknown. An understanding of the diet and trophic role of lobsters in these ecosystems is a key component of the assessment of ecosystem effects of the western rock lobster fishery. This study uses gut content and stable isotope analyses to determine the diet and trophic role of lobsters in deep-coastal ecosystems. Dietary analysis indicated adult lobsters in deep-coastal ecosystems were primarily carnivorous with diet reflecting food available on the benthos. Gut content analyses indicate crabs (62 %) and amphipods/isopods (~10 %) are the most important lobster dietary sources. Stable isotope analysis indicates natural diet of lobsters in deep coastal ecosystems is dominated by amphipods/isopods (contributing up to ~50 %) and crabs (to ~75 %), with bivalves/gastropods, red algae and sponges of lesser importance (<10 % of diet each). Diet of lobsters in deep-coastal ecosystems differed from that reported for lobsters inhabiting shallow water ecosystems in this region, reflecting differences in food availability and food choice between these ecosystems. Bait from the fishery was also determined (by stable isotope analyses) to be a significant dietary component of lobsters in deep-coastal ecosystems, contributing between 10 and 80 % of lobster food requirements at some study locations. '...' Given observed effects of organic matter addition in trawl fisheries, and also associated with aquaculture, bait addition is likely to have implications for processes occurring within deep-coastal ecosystems in this region, particularly given its oligotrophic status, most likely by increasing the food available to scavenging species. Removal of lobsters from deep-coastal ecosystems may affect the composition and abundance of lobster prey communities through a reduction in predation pressure. Such effects have been demonstrated for other spiny lobster species. These effects are typically most observable amongst common prey taxa which in other studies have been commonly herbivores. In deep-coastal ecosystems, crabs and amphipods/isopods are the most common prey taxa and most likely to be effected. The ecosystem-impacts of top-down control of non-herbivorous prey species is unknown and constrains the inferences possible from this study. However, the establishment of 'no-take' areas in deep-coastal ecosystems would allow the ecosystem effects of lobster removal to be further assessed in these deep-coastal ecosystems. While data from the current study did not allow the ecosystem effects of lobster removal to be properly assessed, this study provided information regarding the ecology of western rock lobsters in previously unstudied ecosystems.