This master’s thesis deals with creating a business plan for the foundation of a travel agency. The thesis consists of three parts, a theoretical part, an analysis of the current situation and the proposal of a business plan. The theoretical part describes the principles of formation of a business plan and legal forms of business. The business plan is formed based on the analysis of the market into which the new travel agency enters.

The Master’s thesis deals with the business plan to found a private kindergarten in the town of Rájec-Jestřebí. The kindergarten will be established as a limited liability company. The thesis consists of three basic parts. The introduction describes the theoretical bases.The second part deals with analyses of the currentmarket situation. The final part contains the specific business plan, which is created on the basis of market gaps in this area in the market.

The aim of this thesis is the business plan for the establishment of riding stable. The stable will be located in the village Vesce near the town Moravské Budějovice and among the services that will be offered include stabling, training horses and riders and equestrian club. Part of the business plan is a thorough analysis of the business environment. There are also dealt with the essential requirements and procedure for the establishment of a riding stable. The business plan is also prepared personnel, marketing and financial plan. The business risks are related, because the work includes risk assessment company. Business plan will serve to decide whether to start a business or not.

The diploma thesis is focused on creation of a business plan for establishing a new company. Company makes a new computer sets with water cooling system and own design. The analysis of internal and external environment of the company and particular bisuness plan, are based on theoretical part resources.

This diploma thesis deals with a proposal of the business plan for the establishment of a private english kindergarten in Brno. The thesis consists of three main parts. The introduction summarizes the theoretical knowledge which is required for a successful establishment and operating of the kindergarten. The second part deals with analyses of the current market situation and serves to identify specific needs of the target segment. The final part contains the specific business plan for the establishment of a private english kindergarten, which is based on the findings of the two previous parts of the thesis.

The master´s thesis deals with the draft of the business plan for the new business from selected branch. The thesis is divided into three parts. In the first part there is defined basic theoretical background related to the topic. The second analytical part deals with analysis of the relevant market and the final practical part contains the actual creation of of the business plan.

The diploma thesis is focused on the draft corporate financial plan proposal. The first part of the thesis includes the theoretical background to financial plan issues. The second part consists of the presentation of the company and of its contemporary state´s and its business environment´s analysis. After that the financial plan for the years 2016- 2019 is proposed in optimistic and pesimistic variant, with its evaluation in the end.

The thesis deals with the proposal of a business plan for the establishment of a company engaged in production and sale of confectionery products in the Rožnov region. To enter this relatively small but highly competitive market, a differentiation path is chosen, in particular by selling traditional and fair desserts in a home-based thematic patisserie. Another planned distribution route is the sale of coffee and selected products from a mobile stand in front of the fourth most visited museum in the Czech Republic. For the compilation of the business plan, information and data from books and online resources are used as well as data from the analysis of the company's external and internal environment. The business plan proposal itself includes a description of the company's concepts and plans, including the prediction of the financial situation of the future business.

L'inspection dimensionnelle, qui consiste à vérifier la conformité géométrique des pièces vis-à-vis des spécifications, est une étape essentielle dans le cycle de vie des produits. Elle s’appuie de plus en plus sur la mesure multi-capteurs qui permet un gain de temps certain. Néanmoins, le gain de temps n'a de sens que si la qualité des résultats respecte le besoin métrologique. En effet, la mise en œuvre combinée de capteurs de technologie et de caractéristiques différentes engendre un certain nombre de problèmes qui affectent directement la qualité de la mesure. Dans ce travail, une approche d'inspection automatique utilisant un scanner combinant un capteur à contact avec un capteur laser-plan monté sur une MMT est proposée. Cette approche cherche à utiliser au mieux les capacités de chacun des capteurs, en privilégiant la mesure avec le capteur laser-plan dès lors que la qualité requise est obtenue pour un gain de temps. L’approche consiste à définir une séquence d’opérations de mesure de surfaces qui portent des spécifications, appelées entités d’inspection.Partant d'un ensemble d'orientations du scanner, la séquence d'opérations est établie pour chaque orientation par évaluation de l'aptitude du capteur laser puis celle du palpeur à mesurer les surfaces avec la qualité nécessaire. La gamme d'inspection est complétée par la définition optimale de la trajectoire du capteur laser-plan et celle du palpeur pour chaque orientation. La trajectoire finale exécutée sur machine MMT est obtenue par transformation et assemblage des deux trajectoires. À l'issue de l'exécution, la mesure avec les deux capteurs conduit à deux nuages de points hétérogènes qu’il convient de traiter avant l’évaluation finale des spécifications. / Dimensional inspection, which consists in verifying the geometric conformity of parts in terms of specifications, is an essential step in the product life cycle. Recently, dimensional inspection has been increasingly based on multi-sensor measurement that allows a significant time saving. However, time saving is only meaningful if the quality of the results respects the metrological requirements. Indeed, the combined use of sensors of different technologies and characteristics generates issues that affect the measurement quality. In this work, an automatic inspection approach using a scanner combining a contact sensor with a laser-plane sensor mounted on a CMM is proposed. This approach aims to best use the abilities of each of the sensors, giving priority to measurement with the laser-plan sensor as soon as the required quality is obtained for time saving. The approach consists in defining a sequence of surface measurement operations that have specifications, called inspection features.Starting from a set of scanner orientations, the sequence of operations is established for each orientation by evaluating the ability of the laser sensor and then that of the probe to measure surfaces with the required quality. The inspection plan is completed by the optimal definition of the laser-plane sensor path and the probe path for each orientation. The final path executed on the CMM machine is obtained by transforming and assembling the two paths. At the end of the execution, the measurement with the two sensors leads to two heterogeneous point clouds that must be processed before the final evaluation of the specifications.

The diploma thesis deals with the proposal of a business plan. The theoretical part defines the reasons for compiling a business plan and the general process of its creation. The creation of the plan is described progressively, with the structure that is commonly used for a business plan. The second part of the thesis presents the proposal of a specific business plan. The topic of this plan is the project of an apartment building with retail space. The content of the plan is the introduction of the company behind the project, the acquaintance with the circumstances of the project, financial and other analyzes that are needed for the composition of the business plan.