Made available in DSpace on 2014-10-09T12:41:11Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:08:35Z (GMT). No. of bitstreams: 1 04051.pdf: 13566851 bytes, checksum: 00f45b4ba82c60e068d8fd10c9aba717 (MD5) / Tese (Doutoramento) / IPEN/T / Universidade Estadual de Campinas - UNICAMP/SP

Les alliages de titane sont actuellement très utilisés comme implants orthopédiques de part leurs bonnes propriétés mécaniques, leur bonne résistance à la corrosion ainsi que leur excellente biocompatibilité. Cependant, l’alliage Ti-6Al-4V qui est le plus utilisé présente un module d'élasticité élevé (110GPa), ce qui peut provoquer le phénomène de « stress shielding » et finalement causer l’échec de l’implantation. De plus, l’utilisation à long terme de ce type d’alliage est remise en question à cause de la présence de certains éléments (Al et V) considérés comme cytotoxiques et/ou allergènes. Les alliages -métastables à base de titane peuvent être des candidats de remplacement intéressants grâce à l’addition d'éléments biocompatibles tel que Nb, Zr et Sn.L'alliage superélastique biocompatible de composition Ti-24Nb-4Zr-8Sn (% massique) a été étudié dans le cadre de cette thèse. Cet alliage montre des propriétés intéressantes telles qu’un bas module d’élasticité, une résistance mécanique élevée et une ductilité relativement importante.Dans ce travail de thèse, différents traitements thermomécaniques ont été réalisés afin d’obtenir des textures cristallographiques différentes. Les influences de changement de texture sur les propriétés mécaniques et la superélasticité ont été ainsi préalablement étudiées. La transformation martensitique a été caractérisée par des essais in situ de diffraction des rayons X sous rayonnement synchrotron (SXRD) pendant une sollicitation mécanique et par analyse mécanique dynamique (DMA) sous différentes contraintes statiques. De plus, les microstructures de déformation ont été observées par EBSD et MET pour caractériser précisément les mécanismes de déformation plastique, en particulier le maclage. / Titanium alloys have already been extensively used as orthopedic implants due to the good mechanical properties, corrosion resistance and excellent biocompability. However, the most widely used Ti-6Al-4V alloy exhibits high elastic modulus (110GPa) which would cause the stress shield effect and eventually lead to the implantation failure. Furthermore, elements of Al and V are proved to be toxic for long-term application. Low modulus metastable  titanium alloy can be a suitable candidate through proper addition of non-toxic alloying element such as Nb, Zr and Sn.The present investigated Ti-24Nb-4Zr-8Sn alloy is a new -type metastable alloy potentially interesting for biomedical applications. This alloy displays high strength, low elastic modulus, high ductility, superelastic property and good biocompatibility according to previous investigations.In this work, the as-cold rolled Ti-24Nb-4Zr-8Sn alloy was subjected to different thermo-mechanical treatments in order to introduce different crystallographic texture. Influences of texture change on mechanical properties and superelasticity have been preliminarily studied. Martensitic transformation which is responsible for the superelasticity has been characterized by both in situ synchrotron X-ray diffraction and dynamic mechanical analysis. Moreover, deformed microstructures have been observed by EBSD and TEM to characterize precisely the plastic deformation mechanisms, and particularly the twinning.

<p>Architected materials are a class of materials with novel properties that consist of numerous periodic unit cells. <a>In past investigations, researchers have demonstrated how architected materials can achieve these novel properties by </a><a>tailoring the features of the unit cells without changing the bulk materials</a>. <a>Here, a group of architected materials called Phase Transforming Cellular Materials (PXCMs) are investigated with the goal of mimicking the novel properties of shape-memory alloys.</a> <a>A general methodology is developed for creating 1D PXCMs that exhibit temperature-induced reverse phase transformations (i.e., shape memory effect) after undergoing large deformations. During this process, the PXCMs dissipate energy but remain elastic (i.e., superelasticity). </a>Next, inspired by the hydration-induced shape recovery of feathers, a PXCM-spring system is developed that uses the superelasticity of PXCMs to achieve shape recovery. Following these successes, the use of PXCMs to resist simulated seismic demands is evaluated. To study how they behave in a dynamic environment and how well their response can be estimated in such an environment, a single degree of freedom-PXCM system is subjected to a series of simulated ground motions. Lastly, the concept of PXCMs is extended into two dimensions by creating PXCMs that achieve superelasticity in two or more directions. Overall, the findings of this investigation indicate that PXCMs<a>: 1) can achieve shape memory and recovery effects through temperature changes, 2) offer a novel alternative to traditional building materials for resisting seismic demands, and 3) can be expanded into two dimensions while still exhibiting superelasticity. </a></p> <p> </p>

Zirconia based ceramics are strong, hard, inert, and smooth, with low thermal conductivity and good biocompatibility. Such properties made zirconia ceramics an ideal material for different applications form thermal barrier coatings (TBCs) to biomedicine applications like femoral implants and dental bridges. However, this unusual versatility of excellent properties would be mediated by the metastable tetragonal (or cubic) transformation to the stable monoclinic phase after a certain exposure at service temperatures. This transformation from tetragonal to monoclinic, known as LTD (low temperature degradation) in biomedical application, proceeds by propagation of martensite, which corresponds to transformation twinning. As such, tetragonal to monoclinic transformation is highly sensitive to mechanical and chemomechanical stresses. It is known in fact that this transformation is the source of the fracture toughening in stabilized zirconia as it occurs at the stress concentration regions ahead of the crack tip. This dissertation is an attempt to provide a kinetic-based model for tetragonal to monoclinic transformation in zirconia. We used the phase field technique to capture the temporal and spatial evolution of monoclinic phase. In addition to morphological patterns, we were able to calculate the developed internal stresses during tetragonal to monoclinic transformation. The model was started form the two dimensional single crystal then was expanded to the two dimensional polycrystalline and finally to the three dimensional single crystal. The model is able to predict the most physical properties associated with tetragonal to monoclinic transformation in zirconia including: morphological patterns, transformation toughening, shape memory effect, pseudoelasticity, surface uplift, and variants impingement. The model was benched marked with several experimental works. The good agreements between simulation results and experimental data, make the model a reliable tool for predicting tetragonal to monoclinic transformation in the cases we lack experimental observations.

No description available.

No description available.

No description available.

Near equi-atomic nickel titanium (NiTi) shape memory alloys (SMAs) are a class of materials characterized by their unique deformation behavior. In these alloys, deformation mechanisms such as mechanical twinning and stress induced phase transformation between a high symmetry phase (austenite) and a low symmetry phase (martensite) additionally occur and influence mechanical behavior and thus their functionality. Consequently, applications of SMAs usually call for precise phase transformation temperatures, which depend on the thermomechanical history and the composition of the alloy. Instrumented indentation, inherently a mechanical characterization technique for small sampling volumes, offers a cost effective means of empirically testing SMAs in the form of centimeter scaled buttons prior to large-scale production. Additionally, it is an effective probe for intricate SMA geometries (e.g., in medical stents, valves etc.), not immediately amenable to conventional mechanical testing. The objective of this work was to study the deformation behavior of NiTi SMAs using instrumented indentation. This involved devising compliance calibration techniques to account for instrument deformation and designing spherical diamond indenters. Substantial quantitative information related to the deformation behavior of the shape memory and superelastic NiTi was obtained for the first time, as opposed to existing qualitative indentation studies. For the case of shape memory NiTi, the elastic modulus of the B19' martensite prior to twinning was determined using spherical indentation to be about 101 GPa, which was comparable to the value from neutron diffraction and was substantially higher than typical values reported from extensometry (68 GPa in this case). Twinning at low stresses was observed from neutron diffraction measurements and was attributed to reducing the elastic modulus estimated by extensometry. The onset of predominantly elastic deformation of the twinned martensite was identified from the nanoindentation response and the elastic modulus of the twinned martensite was estimated to be about 17 GPa. Finite element modeling was used to validate the measurements. For the case of the superelastic NiTi, the elastic modulus of the parent austenite was estimated to be about 62 GPa. The onset of large-scale stress induced martensite transformation and its subsequent elastic deformation were identified from the nanoindentation response. The effect of cycling on the mechanical behavior of the NiTi specimen was studied by repeatedly indenting at the same location. An increase in the elastic modulus value for the austenite and a decrease in the associated hysteresis and residual depth after the initial few cycles followed by stabilization were observed. As for the case of shape memory NiTi, finite element modeling was used to validate the measurements. This work has initiated a methodology for the quantitative evaluation of shape memory and superelastic NiTi alloys with instrumented spherical indentation. The aforementioned results have immediate implications for optimizing thermomechanical processing parameters in prototype button melts and for the mechanical characterization of intricate SMA geometries (e.g., in medical stents, valves etc.) This work was made possible by grants from NASA (NAG3-2751) and NSF (CAREER DMR-0239512) to UCF.

In recent decades, a type of shape memory polymers (SMPs), namely thermoplastic shape memory polyurethane (shape memory TPU, using TPU for short) has drawn considerable attention for its excellent shape memory properties, versatile structure and good mechanical properties. Most recently, shape memory TPU films are envisioned as a replacement for automobile exterior and interior decorative applications in the forms of laminates through in-mold forming (IMF) process. However, for a better dimensional control of laminates during the IMF, the shape memory effect of laminates needs to be controlled such that its behaviour is only noted at the time of damage and is not an instigator of delamination. In order to investigate the shape memory behavior of TPU based laminates after they had experienced normal processing such as by thermoforming, the influence of different properties were examined, including TPU film modulus, substrate used (polypropylene (PP) versus acrylonitrile butadiene styrene (ABS)), ambient temperature and the extent of deep draw, on the recovery behaviour. The study included analyses through both experimental and modelling methods. A novel thermo-mechanical cycling method was proposed to examine the shape memory property of the TPU based laminates under stretching/bending conditions more similar to thermoforming. Recovery based on this method was defined using new terms of angle recovery ratio and recovery rate. The new test examined recovery at 15oC, 45oC and 65oC; these ambient conditions were selected above and below the glass transition temperature of the TPU. Results showed that the final angle recovery ratio and recovery rate of deformed laminates based on a new commercial class of TPU shape memory polymer increased with its modulus from low to high. Substrates of higher modulus (ABS) lowered the final angle recovery ratio and recovery rate achievable for a formed laminate. Furthermore, increasing the ambient temperature increased both the final angle recovery ratios and recovery rates of formed TPU based laminates. As the extent of draw changed from 6 mm to 10mm, the final angle recovery ratios and recovery rates of formed laminates increased for all TPU films but this trend was reversed when the draw further increased beyond 10mm. The laminate system was subsequently modelled using a linear viscoelastic (SLV) constitutive model to analyze the stress-strain relationship between the substrate and TPU film layers during recovery. A model parameter related to stress transfer across the interface of these two polymer layers was fitted to the experimental results with an excellent degree of fit. The model results fitted well with experimental data and showed that the final angle recovery ratios of formed TPU laminates were mainly dependant on the moduli of TPU and substrates layers as well as the stress transfer ratio through the adhesive layer (TR). The influence of the adhesive layer was not a trivial variable in the recovery nature of the laminate. The influence of ambient temperature on the recovery behaviour of laminates was mainly due to the temperature-dependent and time-dependent Young’s modulus and relaxation time of both TPU and substrate layers. Higher relaxation times for the TPU layer or lower relaxation time for the substrate layer yielded a higher recovery rate for the laminate during the first five minutes of recovery. / Thesis / Master of Applied Science (MASc) / Special classes of Polyurethanes exhibit a strong memory of their formed shape, and hence are called shape memory polymers. Films made of these polymers are envisioned as a replacement for decorative applications in automobiles if their forming behaviour is understood. This thesis project looked at how much of that memory was preserved as a laminate after thermoforming by looking at the effect of film stiffness, backing material used (polypropylene (PP) versus acrylonitrile butadiene styrene (ABS)), ambient temperature and the extent of deep draw, using both experimental and modelling methods. Results showed that through using stiffer films, weaker substrates, high ambient temperature or an optimal extent of deep draw, recovery behavior of the shape memory polymer in these laminates can be improved, and vice versa.

No description available.