This Masters thesis investigates the ligand–particle binding interactions in the thiol–capped CdTe nanoparticles and dye adsorbed gold nanoparticles. In the CdTe nanoparticles, Raman modes corresponding to the CdTe core, thiol ligand and their interfacial layers were observed and correlated to the different nanoparticle properties. To the best of our knowledge, this is the first time that such strong Raman modes of the thiol-capped nanoparticles in aqueous solution have been reported. In the gold nanoparticle systems, gold–citrate binding interactions were observed as well as adsorption of the Raman dyes and binding with the polyethyleneglycol polymer coating and phospholipid coating. These observations coincided with findings from conventional optical techniques. In addition, gold nanoparticles were found to carbonize at high pump power and prolonged exposure time. In summary, the two nanoparticle characterizations demonstrated the high sensitivity and nondestructive nature of the photonic crystal fiber for Raman spectroscopy.

This Masters thesis investigates the ligand–particle binding interactions in the thiol–capped CdTe nanoparticles and dye adsorbed gold nanoparticles. In the CdTe nanoparticles, Raman modes corresponding to the CdTe core, thiol ligand and their interfacial layers were observed and correlated to the different nanoparticle properties. To the best of our knowledge, this is the first time that such strong Raman modes of the thiol-capped nanoparticles in aqueous solution have been reported. In the gold nanoparticle systems, gold–citrate binding interactions were observed as well as adsorption of the Raman dyes and binding with the polyethyleneglycol polymer coating and phospholipid coating. These observations coincided with findings from conventional optical techniques. In addition, gold nanoparticles were found to carbonize at high pump power and prolonged exposure time. In summary, the two nanoparticle characterizations demonstrated the high sensitivity and nondestructive nature of the photonic crystal fiber for Raman spectroscopy.

The focus of this thesis is on the development of sensing devices based on optical fiber sensors, specifically optical Fiber Bragg Gratings (FBG), using laser microfabrication methods. FBG is a type of optical fibers whose spectral response is affected by applied strain and temperature. As a result, it can be calibrated for the measurement of physical parameters manifesting themselves in the changes of strain or temperature. The unique features of optical fiber sensors such as FBGs have encouraged the widespread use of the sensor and the development of optical fiber-based sensing devices for structural measurements, failure diagnostics, thermal measurements, pressure monitoring, etc. These features include light weight, small size, long-term durability, robustness to electromagnetic disturbances, and resistance to corrosion. Despite the encouraging features, there are some limitations and challenges associated with FBGs and their applications. One of the challenges associated with FBGs is the coupling of the effects of strain and temperature in the optical response of the sensors which affects the reliability and accuracy of the measurements. Another limitation of FBGs is insensitivity to the index of refraction of their surrounding medium. In liquids, the index of refraction is a function of concentration. Making FBGs sensitive to the index of refraction and keeping their thermal sensitivity intact enable optical sensors with the capability of the simultaneous measurement of concentration and temperature in liquids. Considering the unique features of FBGs, embedding of the sensors in metal parts for in-situ load monitoring is a cutting-edge research topic. Several industries such as machining tools, aerospace, and automotive industries can benefit from this technology. The metal embedding process is a challenging task, as the thermal decay of UV-written gratings can starts at a temperature of ~200 oC and accelerates at higher temperatures. As a result, the embedding process needs to be performed at low temperatures. The objective of the current thesis is to move forward the existing research front in the area of optical fiber sensors by finding effective solutions to the aforementioned limitations. The approaches consist of modeling, design, and fabrication of new FBG-based sensing devices. State-of-the-art laser microfabrication methods are proposed and implemented for the fabrication of the devices. Two approaches are adopted for the development of the FBG-based sensing devices: the additive method and the subtractive method. In both methods, laser direct microfabrication techniques are utilized. The additive method deals with the deposition of on-fiber metal thin films, and the subtractive method is based on the selective removal of materials from the periphery of optical fibers. To design the sensing devices and analyze the performance of the sensors, an opto-mechanical model of FBGs for thermal and structural monitoring is developed. The model is derived from the photo-elastic and thermo-optic properties of optical fibers. The developed model can be applied to predict the optical responses of a FBG exposed to structural loads and temperature variations with uniform and non-uniform distributions. The model is also extended to obtain optical responses of superstructure FBGs in which a secondary periodicity is induced in the index of refraction along the optical fiber. To address the temperature-strain coupling in FBGs, Superstructure FBGs (SFBG) with on-fiber metal thin films are designed and fabricated. It is shown that SFBGs have the capability of measuring strain and temperature simultaneously. The design of the sensor with on-fiber thin films is carried out by using the developed opto-mechanical model of FBGs. The performance of the sensor in concurrent measurement of strain and temperature is investigated by using a customized test rig. A laser-based Direct Write (DW) method, called Laser-Assisted Maskless Microdeposition (LAMM), is implemented to selectively deposit silver thin films on optical fibers and fabricate the superstructure FBGs. To attain thin films with premium quality, a characterization scheme is designed to study the geometrical, mechanical, and microstructural properties of the thin films in terms of the LAMM process parameters. A FBG, capable of measuring concentration and temperature of liquids is developed, and its performance is tested. Femtosecond laser micromachining is successfully implemented as a subtractive method for the sensor fabrication. For this purpose, periodic micro-grooves are inscribed in the cladding of regular FBGs so as to increase their sensitivity to the concentration of their surrounding liquid while keeping their thermal sensitivity intact. This type of sensors has the potential for applications in biomedical research, in which the in-situ measurement of the properties of biological analytes is required. Another accomplishment of this thesis is the development of FBG sensors embedded in metal parts for structural health monitoring using low temperature embedding processes. In this regard, the opto-mechanical model is extended to predict the optical response of the embedded FBGs. The embedding process involves low temperature casting, on-fiber thin film deposition, and electroplating methods. The performance of the embedded sensors is evaluated in structural loading and thermal cycling.

The focus of this thesis is on the development of sensing devices based on optical fiber sensors, specifically optical Fiber Bragg Gratings (FBG), using laser microfabrication methods. FBG is a type of optical fibers whose spectral response is affected by applied strain and temperature. As a result, it can be calibrated for the measurement of physical parameters manifesting themselves in the changes of strain or temperature. The unique features of optical fiber sensors such as FBGs have encouraged the widespread use of the sensor and the development of optical fiber-based sensing devices for structural measurements, failure diagnostics, thermal measurements, pressure monitoring, etc. These features include light weight, small size, long-term durability, robustness to electromagnetic disturbances, and resistance to corrosion. Despite the encouraging features, there are some limitations and challenges associated with FBGs and their applications. One of the challenges associated with FBGs is the coupling of the effects of strain and temperature in the optical response of the sensors which affects the reliability and accuracy of the measurements. Another limitation of FBGs is insensitivity to the index of refraction of their surrounding medium. In liquids, the index of refraction is a function of concentration. Making FBGs sensitive to the index of refraction and keeping their thermal sensitivity intact enable optical sensors with the capability of the simultaneous measurement of concentration and temperature in liquids. Considering the unique features of FBGs, embedding of the sensors in metal parts for in-situ load monitoring is a cutting-edge research topic. Several industries such as machining tools, aerospace, and automotive industries can benefit from this technology. The metal embedding process is a challenging task, as the thermal decay of UV-written gratings can starts at a temperature of ~200 oC and accelerates at higher temperatures. As a result, the embedding process needs to be performed at low temperatures. The objective of the current thesis is to move forward the existing research front in the area of optical fiber sensors by finding effective solutions to the aforementioned limitations. The approaches consist of modeling, design, and fabrication of new FBG-based sensing devices. State-of-the-art laser microfabrication methods are proposed and implemented for the fabrication of the devices. Two approaches are adopted for the development of the FBG-based sensing devices: the additive method and the subtractive method. In both methods, laser direct microfabrication techniques are utilized. The additive method deals with the deposition of on-fiber metal thin films, and the subtractive method is based on the selective removal of materials from the periphery of optical fibers. To design the sensing devices and analyze the performance of the sensors, an opto-mechanical model of FBGs for thermal and structural monitoring is developed. The model is derived from the photo-elastic and thermo-optic properties of optical fibers. The developed model can be applied to predict the optical responses of a FBG exposed to structural loads and temperature variations with uniform and non-uniform distributions. The model is also extended to obtain optical responses of superstructure FBGs in which a secondary periodicity is induced in the index of refraction along the optical fiber. To address the temperature-strain coupling in FBGs, Superstructure FBGs (SFBG) with on-fiber metal thin films are designed and fabricated. It is shown that SFBGs have the capability of measuring strain and temperature simultaneously. The design of the sensor with on-fiber thin films is carried out by using the developed opto-mechanical model of FBGs. The performance of the sensor in concurrent measurement of strain and temperature is investigated by using a customized test rig. A laser-based Direct Write (DW) method, called Laser-Assisted Maskless Microdeposition (LAMM), is implemented to selectively deposit silver thin films on optical fibers and fabricate the superstructure FBGs. To attain thin films with premium quality, a characterization scheme is designed to study the geometrical, mechanical, and microstructural properties of the thin films in terms of the LAMM process parameters. A FBG, capable of measuring concentration and temperature of liquids is developed, and its performance is tested. Femtosecond laser micromachining is successfully implemented as a subtractive method for the sensor fabrication. For this purpose, periodic micro-grooves are inscribed in the cladding of regular FBGs so as to increase their sensitivity to the concentration of their surrounding liquid while keeping their thermal sensitivity intact. This type of sensors has the potential for applications in biomedical research, in which the in-situ measurement of the properties of biological analytes is required. Another accomplishment of this thesis is the development of FBG sensors embedded in metal parts for structural health monitoring using low temperature embedding processes. In this regard, the opto-mechanical model is extended to predict the optical response of the embedded FBGs. The embedding process involves low temperature casting, on-fiber thin film deposition, and electroplating methods. The performance of the embedded sensors is evaluated in structural loading and thermal cycling.

As some companies in the paper industry struggle to shift from commodity grades to value added products, technical challenges and opportunities have grown tremendously. These new products require more stringent manufacturing specifications and improved performance relative to those of lignocellulosic fibers currently being produced. Hence, topochemical and mechanical modifications of pulp fibers have moved to the forefront of many corporate strategies. Researchers are beginning to develop new tools to help better understand the fundamental mechanisms of fiber modifications and how to most efficiently apply them. Two novel approaches are presented. First, a new method to observe single fiber crossings is developed. It was found that refining reduces the stepheight in the fiber crossing for both hardwood and softwood kraft pulps by increasing the tendency of the fibers to collapse, deform, and assume a lens like shape. The effect of pulp type, bleaching, drying, wet pressing, and fiber charge were also investigated. Graphs of stepheight versus freespan were linear through the origin suggesting that the freespan (flexibility) of the crossing fiber is largely unimportant to the formation of fiber crossings. Quite surprisingly, the ratio of stepheight to freespan remained relatively constant no matter the treatment. Only bleaching and the addition of surface charge via CMC had any independent impact on freespan. The data do not fit bending or shear mechanisms that have been developed in the literature suggesting that another mechanism may be responsible for the deformation behavior of single fiber crossings. Also, a method employing fluorescence microscopy and fluorescence resonance energy transfer is used to image the areas of a fiber-fiber interface while they were bonded. Analysis of the FRET signal from fiber crossings indicate that wet pressing increased the FRET occurring between the two dyed fiber surfaces. The results are consistent with the increased amount of interdiffusion expected with higher levels of wet pressing. Two novel techniques are used to investigate fundamental aspects of fiber deformation behavior and fiber-fiber bond formation. As these methods are further refined and utilized they will provide new avenues for researchers to explore and expand the property space of fibers and paper sheets.

Recently, long-period fiber gratings (LPFGs) based on PCFs have been demonstrated by using heating or a mechanically pressure to induce periodic index variations along the fibers. However, LPFGs fabricated by these two methods suffer the structure damage. In this thesis we propose novel optically controllable LPFGs based on the photoresponsive photonic liquid crystal fibers (PLCFs) and no structure damage occurs during the fabrication process. The photoresponsive PLCF was filled with a LC mixture consisting of the nematic LC E7 and the photoresponsive 4MAB. The properties of the photoresponsive PLCF can be modulated by using laser irradiation. In addition, the transmission bands of the photoresponsive PLCF can also be tuned by controlling the 4MAB concentration or operation temperature. An optically controllable LPFG was fabricated based on the photoresponsive PLCF by using blue-laser irradiation through a mask with 700-£gm grating period. The measured resonant wavelength appeared at 1539 nm with the FWHM was 27 nm, and the maximum dip depth was about −15 dB with a 6.5-dB insertion loss. The LPFG was shown to be erasable by using a green laser. In addition, we have also investigated the effects of the number of grating period, 4MAB concentrations, operation temperatures, thermal recovery properties, and irradiation intensity on the LPFGs. Our proposed optically controllable LPFGs possess reversible property and are quite useful to be applied in tunable optical devices.

The objective of this thesis work is to increase the functionality of optical fibers for possible applications in life-sciences. Optical fibers are a promising technology for use in biology and medicine. They are low-costwaveguides, flexible and have a small cross-section. They can guide high-power light with low loss in a micrometer core-size. These features make fibers attractive for minimally-invasive,in-vivostudies. The backwards guidance of the optical signal allows for real-time monitoring of the distance to the scattering targets and to study the environment through Raman scattering and fluorescence excitation. The longitudinal holes introduced in the fibers can be used,for instance,for delivery of medicine to a specific regionof a body. They could even be used for the extractionof species considered interesting for further analysis, for example, studyingcells that may be cancer-related. This thesis deals with four main topics. First, a demonstration is presented of the combination of high-power light guidance for ablation, low-power light reflectometry for positioning, and for liquid retrieval in a single fiber. It was found that in order to exploit the microfluidic possibilities available in optical fibers with holes, one needs to be able to combine fluids and light in a fiber without hindering the low-loss light guidance and the fluid flow. Secondly, one should also be able to couple light into the liquids and backout again. This is the subject of another paper in the present thesis. It was also observed that laser excitation through a fiber for the collection of a low-intensity fluorescence signal was often affected by the luminescence noise createdby the primary-coating of the fiber. This problem makes it difficult to measure low light-levels, for example, from single-cells. Athirdpaper in this thesis then describes a novel approach to reduce the luminescence from the polymer coating of the fiber, with the use of a nanometer-thick carbon layer on the cladding surface. Finally, exploiting some of the results described earlier, an optical fiber with longitudinal holes is used for the excitation, identification and for the collection of particles considered being of interest. The excitation light is guided in the fiber, the identification is performed by choosing the fluorescent particles with the appropriate wavelength, and, when a particle of interest is sufficiently near the fiber-tip, the suction system is activated for collection of the particle with good specificity. It is believed that the work described in this thesis could open the doors for applications in life-sciences and the future use of optical fibers for in-vivo studies. / <p>QC 20140516</p>

In this dissertation, high-power ytterbium-doped fiber amplifiers designed with advanced waveguide concepts are characterized and power scaled. Fiber waveguides utilizing cladding microstructures to achieve wave guidance via the photonic bandgap (PBG) effect and a combination of PBG and modified total internal reflection (MTIR) have been proposed as viable single-mode waveguides. Such novel structures allow larger core diameters (>35 μm diameters) than conventional step-index fibers while still maintaining near-diffraction limited beam quality. These microstructured fibers are demonstrated as robust single-mode waveguides at low powers and are power scaled to realize the thermal power limits of the structure. Here above a certain power threshold, these coiled few-mode fibers have been shown to be limited by modal instability (MI); where energy is dynamically transferred between the fundamental mode and higher-order modes. Nonlinear effects such as stimulated Brillouin scattering (SBS) are also studied in these fiber waveguides as part of this dissertation. Suppressing SBS is critical towards achieving narrow optical bandwidths (linewidths) necessary for efficient fiber amplifier beam combining. Towards that end, new effects that favorably reduce acoustic wave dispersion to increase the SBS threshold are discovered and reported. The first advanced waveguide examined is a Yb-doped 50/400 µm diameter core/clad PBGF. The PBGF is power scaled with a single-frequency 1064 nm seed to an MI-limited 410 W with 79% optical-to-optical efficiency and near-diffraction limited beam quality (M-Squared < 1.25) before MI onset. To this author's knowledge, this represents 2.4x improvement in power output from a PBGF amplifier without consideration for linewidth and a 16x improvement in single-frequency power output from a PBGF amplifier. During power scaling of the PBGF, a remarkably low Brillouin response was elicited from the fiber even when the ultra large diameter 50 µm core is accounted for in the SBS threshold equation. Subsequent interrogation of the Brillouin response in a pump probe Brillouin gain spectrum diagnostic estimated a Brillouin gain coefficient, gB, of 0.62E-11 m/W; which is 4x reduced from standard silica-based fiber. A finite element numerical model that solves the inhomogenous Helmholtz equation that governs the acoustic and optical coupling in SBS is utilized to verify experimental results with an estimated gB = 0.68E-11 m/W. Consequently, a novel SBS-suppression mechanism based on inclusion of sub-optical wavelength acoustic features in the core is proposed. The second advanced waveguide analyzed is a 35/350 µm diameter core/clad fiber that achieved wave guidance via both PBG and MTIR, and is referred to as a hybrid fiber. The waveguide benefits mutually from the amenable properties of PBG and MTIR wave guidance because robust single-mode propagation with minimal confinement loss is assured due to MTIR effects, and the waveguide spectrally filters unwanted wavelengths via the PBG effect. The waveguide employs annular Yb-doped gain tailoring to reduce thermal effects and mitigate MI. Moreover, it is designed to suppress Raman processes for a 1064 nm signal by attenuating wavelengths > 1110 nm via the PBG effect. When seeded with a 1064 nm signal deterministically broadened to ~1 GHz, the hybrid fiber was power scaled to a MI-limited 820 W with 78% optical-to-optical efficiency and near diffraction limited beam quality of M_Squared ~1.2 before MI onset. This represents a 14x improvement in power output from a hybrid fiber, and demonstrates that this type of fiber amplifier is a quality candidate for further power scaling for beam combining.

A novel detection technique to estimate the amount of chirp in fiber Bragg gratings (FBGs) is proposed. This method is based on the fact that reflectivity at central wavelength of FBG reflection changes with strain/temperature gradient (linear chirp) applied to the same. Transfer matrix approach was used to vary different grating parameters (length, strength and apodization) to optimize variation of reflectivity with linear chirp. Analysis is done for different sets of ‘FBG length-refractive index strength’ combinations for which reflectivity vary linearly with linear chirp over a decent measurement range. This work acts as a guideline to choose appropriate grating parameters in designing sensing apparatus based on change in reflectivity at central wavelength of FBG reflection. A novel high sensitive FBG strain sensing technique using lasers locked to relative frequency reference is proposed and analyzed theoretically. Static strain on FBG independent of temperature can be measured by locking frequency of diode laser to the mid reflection frequency of matched reference FBG, which responds to temperature similar to that of the sensor FBG, but is immune to strain applied to the same. Difference between light intensities reflected from the sensor and reference FBGs (proportional to the difference between respective pass band gains at the diode laser frequency) is not only proportional to the relative strain between the sensor and reference FBGs but also independent of servo residual frequency errors. Usage of relative frequency reference avoids all complexities involved in the usage of absolute frequency reference, hence, making the system simple and economical. Theoretical limit for dynamic and static strain sensitivities considering all major noise contributions are respectively of the order of 25 pε/ Hz and 1.2nε /

The purpose of this research was to determine the effect of diameter fluctuations on the sensitivity of sapphire multimode optical fibers used as evanescent wave fluorescence sensors. It was predicted that fluctuations in the diameter of the fiber would act as a series of bi-tapers converting lower order modes to higher order modes increasing the evanescent wave penetration depth thereby increasing the excitation of a cladding of fluorescent fluid. Induced fluorescence from the fluid cladding would then couple back into the fiber more efficiently increasing the sensitivity of the sensor. The effect of coiling the fiber on the sensitivity of the sensor was also explored. Coiling the fiber converts lower order modes into higher order modes and increases the sensing length while maintaining a small probe size. However, coiling experiments produced unexpected results and in the course of studying these results a layer of material was discovered coating the surface of the sapphire fibers.