Les travaux présentés ont consisté à développer des stratégies d'identification performantes des paramètres des lois de comportement superélastique des Alliages à Mémoire de Forme (AMF). L'objectif est de disposer d'une solution complète de caractérisation, d'identification, et de simulation de structures en AMF soumises à des sollicitations complexes. Une base de données expérimentale unifiée pour un alliage de NiTi superélastique a été établie pour une multitude de trajets de déformation multiaxiaux et à différentes températures : en traction homogène, en compression, en traction-compression et en traction-traction. Une caractérisation expérimentale a été développée sur une plate-forme multiaxiale assemblée au laboratoire durant ce travail. L'emploi de la corrélation d'images a permis d'enrichir la base de données expérimentale en déterminant pour chaque essai les champs cinématiques. Cette collection d'essais a permis de montrer l'importante différence de comportement observée entre les directions de laminage et transverse, bien que le matériau soit faiblement texturé. Des procédures d'identification du comportement thermomécanique des AMF ont été mises en place, basées sur la construction et minimisation d'une fonction objectif régularisée. La première est basée sur l'exploitation des courbes contrainte-déformation moyennes sous chargement homogène et unixial. La seconde exploite la richesse des champs de déformations mesurés en essai hétérogène. Les deux stratégies ont permis d'identifier les huit paramètres gouvernant le comportement superélastique du modèle de Chemisky et al. (Chemisky et al. 2011). Des différences entre les jeux de paramètres identifiés sont caractéristiques des effets d'anisotropie observés. Le succès de cette stratégie démontre sa pertinence et est encourageant pour l'identification de paramètres de lois de comportement anisotropes.

The study examined interactions between morogo plants, arbuscular mycorrhizal fungi (AMF) and Fusarium species. Morogo refers to traditional leafy vegetables that, together with maize porridge, are dominant staple foods in rural areas of the Limpopo Province such as the Dikgale Demographic Surveillance Site (DDSS). Morogo plants grow either as weeds (often among maize), occur naturally in the field or are cultivated as subsistence crops by rural communities. Botanical species of morogo plants consumed in the DDSS were determined. Colonisation of morogo plant roots by AMF and Fusarium species composition in the immediate soil environment were investigated in four of eight DDSS subsistence communities, Isolated AMF were shown to belong to the genera Acaulospora and Glomus. Twelve Fusarium species were isolated from soil among which Fusariurn verticilliodes and Fusarium proliferaturn occurred predominantly. Greenhouse pot trials were conducted to examine the effect of AMF on morogo plant growth (cowpea; Mgna unguiculata) and Fusarium proliferatum levels in soil, Interaction between plants and AMF, as well as tripartite interactions of cowpea plants, AMF and Fusarium proliferatum were investigated. Non-inoculated cowpea plants served as controls for the following inoculations of cowpea in pots: (i) Fusarium proliferatum; (ii) commercial AMF from Mycoroot (PTY) Ltd. (a mixture of selected indigenous Glomus spp referred to commercial AMF for the purpose of this study); (iii) indigenous AMF obtained from DDSS soil (referred to iocal AMF for the purpose of this study); (iv) commercial AMF plus Fusarium proliferatum; (v) local AMF plus Fusariurn proliferatum. Results showed reduced root colonization by local as well as commercial AMF when Fusarium proliferatum were present. Local AMF significantly enhanced cowpea growth while commercial AMF apparently reduced the level of Fusarium proliferatum in the rhizosphere and surrounding soil. Results suggest that AMF may have potential as biological growth enhancers and bioprotective agents against Fusarium proliferatum. / Thesis (M. Environmental Science (Water Science))--North-West University, Potchefstroom Campus, 2007.

The occurrence in Scotland of arbuscular mycorrhizal fungi (AMF) infective on Alnus glutinosa and the effects on early growth of inoculation of seedlings with AMF and Frankia were investigated. AMF characteristic of G/omiw-like fungi were detected microscopically in A. glutinosa roots from mineral and loam but not from highly organic soils. Both GJomus- and Gigaspora-like fungi were detected only in roots from sandy soils. Glasshouse experiments showed that Glomus and Gigaspora species gave higher colonisation of roots, and were of higher compatibility with the host plant, than Acutelospora or Scutettospora species. Colonisation by AMF increased nodulation by Frankia and vice versa. Inoculation with AMF alone and dual inoculation with Gigaspora rosea and Frankia inhibited growth of young A. glutinosa seedlings. Initially after inoculation, AMF colonisation was poor allowing the host to meet the requirements of both developing symbioses. Mycorrhizal plants inoculated with Frankia 15 days after AMF inoculation, were under significant stress and this delayed the beneficial effects of AMF and Frankia symbiosis. Seedlings compensated for the cost of symbiosis by developing a larger, leafy shoot in a period of 25-30 days after AMF inoculation, with or with out, Frankia nodulation. A significant increase in root length and branching detected after inoculation with AMF and Frankia must impose additional energy requirements. However, the stimulation of lateral root branching that follows AMF colonisation may facilitate nutrient uptake, thus helping the plant to overcome the disadvantages of early retardation of shoot growth. Competition with adjacent plant species for below ground space may also be enhanced thus facilitating competition for growing space with other plant species. These factors may be part of a strategy that assists the survival of very young seedlings in the field. The data obtained suggest that delaying Frankia inoculation for 3-4 weeks after inoculation with selected AMF should improve the production in Scottish nurseries of robust, well nodulated and mycorrhizal seedlings.

Submitted by Claudia Rocha (claudia.rocha@udesc.br) on 2018-03-07T12:37:47Z No. of bitstreams: 1 PGCS16MA144.pdf: 1847024 bytes, checksum: b5325fff6f19f3a1b0badd1a09295544 (MD5) / Made available in DSpace on 2018-03-07T12:37:47Z (GMT). No. of bitstreams: 1 PGCS16MA144.pdf: 1847024 bytes, checksum: b5325fff6f19f3a1b0badd1a09295544 (MD5) Previous issue date: 2016-11-30 / Capes / Because the timber potential, rapid growth and adaptation to edaphoclimatic conditions, the Australian cedar has been outstanding in the segment of sawn wood. The goal of this work was to evaluate the effect of the inoculation of arbuscular mycorrhizal fungi on the accumulation of nutrients, growth and quality of Australian cedar seedlings. The production of the seedlings was conducted in a greenhouse for 150 days. The seedlings were produced from seeds sown directly in the pot. The treatments containing the AMF were: Entrophospora colombiana, Acaulospora morrowiae, mixed inoculum (E. colombiana + A. morrowiae) and SF (control). Transplanting was carried out in the municipality of Dona Emma - SC, where the experimental design was completely randomized blocks, with factorial scheme 4 x 3. The first factor was fungal treatment, while the second factor was N, P and K fertilization, with (22.5 kg ha-1 urea, 67.5 kg ha-1 P2O5, 33.7 kg ha-1 K2O) and 1 dose (45 kg ha-1 urea, 135 kg ha-1 P2O5, 67.5 kg ha-1 K2O). The 4 plants of the useful plot were collected after 120 days of transplanting. The variables height, dry matter of shoot, root dry matter, stem diameter, mycorrhizal colonization and N, P, K, Ca and Mg contents of the plant tissue of the cedar seedlings were evaluated. The quality indexes of seedlings were calculated. The results showed that the seedlings inoculated with mixed inoculum varied between 25 and 31 cm in height, and myotrophism was observed. E. colombiana and mixed inoculum provided increase of MSPA, MSR and DC. A. morrowiae and mixed inoculum showed greater mycorrhizal colonization. The inoculated seedlings presented higher H / DC and higher MSPA / MSR. A. morrowiae presented the lowest IQD. E. colombiana showed to be superior in the absorption of N. The treatments with FMAs showed positive influence on P. A. morrowiae and without fungus were not efficient in the absorption of K and Ca / Em virtude do seu potencial madeireiro, rápido crescimento e adaptação às condições edafoclimáticas, o cedro australiano tem se destacado no segmento de madeira serrada. Este trabalho teve por objetivo avaliar o efeito da inoculação de fungos micorrízicos arbusculares sobre o acúmulo de nutrientes, crescimento e qualidade de mudas de cedro australiano. A produção das mudas foi conduzida em casa de vegetação durante 150 dias. As mudas foram produzidas a partir de sementes semeadas diretamente no vaso. Os tratamentos contendo os FMAs foram: Entrophospora colombiana, Acaulospora morrowiae, inóculo misto (E. colombiana + A. morrowiae) e SF (controle). O transplantio foi realizado no município de Dona Emma – SC, onde o delineamento experimental foi em blocos inteiramente casualizados, com esquema fatorial 4 x 3, com 3 repetições. O primeiro fator foi o tratamento fúngico enquanto que o segundo fator foi adubação N, P e K, com três doses: 0 (sem adubação), 0,5 (22,5 kg ha-1 de ureia; 67,5 kg ha-1 de P2O5; 33,7 kg ha-1 de K2O) e 1 dose (45 kg ha-1 de ureia; 135 kg ha-1 de P2O5; 67,5 kg ha-1 de K2O). Coletou-se as 4 plantas da parcela útil após 120 dias do transplantio. Foram avaliadas as variáveis altura, matéria seca da parte aérea, matéria seca da raiz, diâmetro do caule, colonização micorrízica e os teores de N, P, K, Ca e Mg do tecido vegetal da parte aérea das mudas e calculados os índices de qualidade de mudas. Os resultados mostraram que as mudas inoculadas com inóculo misto variaram entre 25 e 31 cm de altura, sendo observado micotrofismo. E. colombiana e inóculo misto proporcionaram aumento de MSPA, MSR e DC. A. morrowiae e inóculo misto apresentaram maior colonização micorrízica. As mudas quando inoculadas apresentaram maior H/DC e maior MSPA/MSR. A. morrowiae apresentou o menor IQD. E. colombiana mostrou-se superior na absorção de N. Os tratamentos com FMAs apresentaram influência positiva sobre P. A. morrowiae e sem fungo não foram eficientes na absorção de K e Ca

Made available in DSpace on 2015-03-26T13:51:54Z (GMT). No. of bitstreams: 1 texto completo.pdf: 2031314 bytes, checksum: b64e48cf16628db68c74198ac88fc30e (MD5) Previous issue date: 2011-02-21 / The physic nut (Jatropha curcas L.) is an important source of raw material for biodiesel production. This species has high ecological adaptability and can grow in a wide variety of environmental conditions, presenting good development in both dry tropical regions and humid equatorial zones. In the regions where physic nut is being cultivated a large number of spores of Arbuscular Mycorrhizal Fungi (AMF) has been found and the plants have beneficial relationships in association with these fungi. The objective of this work was to survey the AMF species in association with different accesses of physic nut, as well as to compare the diversity of these fungi when physic nut is subjected to different edaphoclimatic conditions, using classical methods of identification for these microorganisms, complemented with molecular techniques. In this context, a total of 19 AMF species were identified in the rhizosphere of physic nut, besides individuals identified only at the genus level. Differences in the occurrence of AMF species among the areas of Viçosa, Canaã and Nova Porteirinha, as well among the different accesses cultivated in this last area were observed. In all areas, the numbers of AMF spores ranged from 89 to 728 per 100 cm3 of soil and the mycorrhizal colonization percentage ranged from 50,67 to 72 %. The species of the genus Glomus were the most abundant. Individuals of physic nut of the same origin, grown in remote regions but with similar edaphoclimatic conditions, present similar AMF species. However, the different accesses showed a variation in AMF population in the rhizospheric soil from the same area. The sum of morphological and molecular methods showed a more complete set of information on the diversity of AMF in the rizosphere of physic nut. These results represent the first reports related to the composition of AMF species in physic nut plantations in different geographical areas. / A cultura do pinhão-manso (Jatropha curcas L.) é considerada uma importante fonte de matéria-prima para produção do biodiesel. Esta espécie possui uma alta adaptabilidade ecológica, permitindo seu crescimento em uma grande variedade de condições ambientais, podendo ter um bom desenvolvimento tanto em regiões tropicais secas quanto em zonas equatoriais úmidas. Regiões onde a cultura do pinhão-manso está sendo implantada apresentam um elevado número de esporos de fungos micorrízicos arbusculares (FMAs) e as plantas apresentam relações benéficas nas associações com estes fungos. O objetivo deste trabalho foi realizar um levantamento das espécies de FMAs em associação com diferentes acessos de pinhão-manso, bem como comparar a diversidade desses fungos quando esta cultura é submetida a diferentes condições edafoclimáticas, utilizando métodos clássicos de identificação para estes micro-organismos, complementados com avaliações moleculares. Neste contexto, um total de 19 espécies de FMAs foi identificado na rizosfera das plantas de pinhão-manso, além dos indivíduos apresentados somente em nível de gênero. Houve diferenças na ocorrência destas espécies entre as áreas de Viçosa, Canaã e Nova Porteirinha, bem como entre os diferentes acessos cultivados nesta última área. Em todas as áreas, o número de esporos de FMAs variou de 89 a 728 por 100 cm3 de solo e a porcentagem de colonização micorrízica variou entre 50,67 a 72 %. As espécies do gênero Glomus foram as mais abundantes. Indivíduos de pinhão-manso de mesma procedência, plantadas em regiões distantes, mas, com condições edafoclimáticas semelhantes, possuem populações de FMAs similares. Os acessos diferentes apresentaram uma variação na população de FMAs no solo rizosférico em uma mesma área. A soma das metodologias morfológicas e moleculares apresentou informações mais completas a respeito da diversidade de FMAs presentes na rizosfera de pinhão-manso. Estes resultados representam os primeiros relatos sobre a composição das espécies de FMAs em povoamentos de pinhão-manso em diferentes áreas geográficas de estudo.

CoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior / Estudos com fungos micorrÃzicos arbusculares tentam elucidar a contribuiÃÃo desses microrganismos no transporte de compostos sinalizadores entre plantas, uma vez que, eles formam uma rede micelial subterrÃnea que conecta as plantas e sÃo capazes de translocar substÃncias entre plantas vizinhas. O objetivo deste estudo foi avaliar a contribuiÃÃo dos fungos micorrÃzicos arbusculares na induÃÃo à resistÃncia do tomateiro a Meloidogyne incognita raÃa 2. O experimento foi realizado em casa de vegetaÃÃo e o delineamento experimental adotado foi o inteiramente casualizado (DIC), composto por 4 tratamentos e 5 repetiÃÃes, totalizando 20 parcelas. Cada parcela constituiu-se por um sistema inicial de vaso duplo conectado (VDC), contendo uma planta em cada lado do vaso, onde uma das plantas foi denominada de emissora (E) e a outra de receptora (R). Os tratamentos foram oriundos da combinaÃÃo entre os vasos com plantas emissoras com e sem micorriza, respectivamente (EM+ e EM-), conectados a vasos com plantas receptoras com e sem micorriza (RM+ e RM-). O experimento foi realizado em duas etapas, fase I e fase II. Iniciou-se a fase I com a introduÃÃo do inÃculo de nematÃide (4000 ovos e J2 M. incognita raÃa 2) apenas nos lados dos vasos contendo as plantas emissoras, com e sem micorrÃza (EM+ e EM-), tendo estas permanecido em contato com os nematÃides durante 45 dias. ApÃs esse perÃodo, procedeu-se a separaÃÃo dos vasos duplos conectados. A fase II teve inÃcio apÃs a separaÃÃo dos vasos e adiÃÃo do inÃculo do nematÃide nas plantas receptoras, permanecendo 45 dias em contado com os nematÃides em casa de vegetaÃÃo. Os resultados mostraram que as plantas emissoras inoculadas com micorrizas foram mais susceptÃveis ao parasitismo por M. incognita raÃa 2, apresentando menor desenvolvimento da planta e maior susceptibilidade ao nematoide. As plantas receptoras que estiveram em contato com as plantas emissoras com micorriza (EM+) no perÃodo de prÃ-condicionamento apresentaram melhor crescimento e menor susceptibilidade ao M. incognita revelando, dessa forma, que foram estimuladas durante a fase I, a acionar seu mecanismo de defesa contra o patÃgeno. / Studies mycorrhizal fungi try to elucidate the contribution of microorganisms in the transport of signaling between plants compounds, since they form a network that connects the underground mycelial and plant substances are able to translocate between neighboring plants. The aim of this study was to evaluate the contribution of mycorrhizal fungi in inducing resistance of tomato to Meloidogyne incognita race 2. The experiment was conducted in a greenhouse and the experimental design was a completely randomized design, consisting of 4 treatments and 5 replicates, totaling 20 plots. Each plot was constituted by a dual system connected initial vessel containing a plant on each side of the vessel, where a plant has been called issuing (I) and one receiver (R).The treatments were derived from the combination of the potted issuing plants with and without mycorrhiza, respectively (IM + and IM-) connected the potted receiver plant with and without mycorrhiza (RM + and RM-). The experiment was conducted in two phases, phase I and phase II. It started with phase I the introduction of nematode inoculum (4000 eggs and J2 Meloidogyne incognita race 2) only at the sides of the pots containing the issuing plants with and without mycorrhiza (IM + and IM-), and those remained in contact with nematodes for 45 days. After this period, we proceeded to double the separation vessel connected. Phase II began after the separation vessel and addition of the nematode inoculum in receiver plants 45 days remaining in contact with the nematodes in the greenhouse. The results showed that issuing plants inoculated with mycorrhizal were more likely to parasitism by M. incognita race 2, with lower plant development and increased susceptibility to nematodes. The receiver plants that were in contact with the issuing plants with mycorrhiza (IM+) during the preconditioning showed better growth and lower susceptibility to M. incognita revealing thereby that were stimulated during Phase I, the activate mechanism of defense against the pathogen.

Les travaux présentés ont consisté à développer des stratégies d'identification performantes des paramètres des lois de comportement superélastique des Alliages à Mémoire de Forme (AMF). L'objectif est de disposer d'une solution complète de caractérisation, d'identification, et de simulation de structures en AMF soumises à des sollicitations complexes. Une base de données expérimentale unifiée pour un alliage de NiTi superélastique a été établie pour une multitude de trajets de déformation multiaxiaux et à différentes températures : en traction homogène, en compression, en traction-compression et en traction-traction. Une caractérisation expérimentale a été développée sur une plate-forme multiaxiale assemblée au laboratoire durant ce travail. L'emploi de la corrélation d'images a permis d'enrichir la base de données expérimentale en déterminant pour chaque essai les champs cinématiques. Cette collection d'essais a permis de montrer l'importante différence de comportement observée entre les directions de laminage et transverse, bien que le matériau soit faiblement texturé. Des procédures d'identification du comportement thermomécanique des AMF ont été mises en place, basées sur la construction et minimisation d'une fonction objectif régularisée. La première est basée sur l'exploitation des courbes contrainte-déformation moyennes sous chargement homogène et unixial. La seconde exploite la richesse des champs de déformations mesurés en essai hétérogène. Les deux stratégies ont permis d'identifier les huit paramètres gouvernant le comportement superélastique du modèle de Chemisky et al. (Chemisky et al. 2011). Des différences entre les jeux de paramètres identifiés sont caractéristiques des effets d'anisotropie observés. Le succès de cette stratégie démontre sa pertinence et est encourageant pour l'identification de paramètres de lois de comportement anisotropes. / In this work, efficient identification strategies were developed to determine the characteristic parameters of the thermomechanical behavior of pseudoelastic Shape Memory Alloys (SMA). The aim is to obtain a complete solution for characterization, identification and numerical simulation of SMA structures undergoing multiaxial loading paths. A unified experimental database has been constructed to characterize the behavior of superelastic NiTi SMAs. This database includes tension, compression, tension-tension and tension-compression multiaxial tests at different temperatures. A characterization methodology has been developed on a multiaxial testing setup, which has been assembled in the laboratory during this Ph.D. project. Vital information about the strain fields for each test is added to the experimental database through the use of Digital Image Correlation. A significant difference in the thermomechanical behavior between the rolling and transverse directions has been observed, even when the specimens are not strongly textured. Two strategies were developed that rely on the minimization of a regularized cost function for identification of thermomechanical constitutive law parameters. The first identification procedure is based on uniaxial homogeneous tests at different temperatures. In the other strategy the information of strain fields of heterogeneous tests are utilized. In each case, the eight material parameters of the constitutive law of Chemisky et al. (Chemisky et al. 2011) have been identified. A difference between the identified parameters in the rolling and transverse direction is noted and corresponds to the effect of anisotropy. Nevertheless, the capabilities of the relevant identification strategies shall allow the determination of the parameters of anisotropic constitutive laws.

La persistance des fraudes financières depuis les origines de la création de la bourse conduit au constat selon lequel la sanction est un élément fondamental du bon fonctionnement des marchés financiers. En l’état actuel du droit positif, notre système de sanction repose pour l’essentiel sur l’Autorité des marchés financiers. À première vue, le droit français offre le visage d’une architecture moderne. Pourtant, l’actualité n’en finit pas de démontrer l’existence d’affaires et de fraudes sensibles affectant drastiquement la confiance des investisseurs dans le système. En vue d’une amélioration de notre système de sanction, la comparaison avec le droit canadien se révèle très enrichissante. Il en ressort que le système de sanction en droit des marchés financiers français pourrait être rendu plus efficace par la création d’une juridiction spécialisée à laquelle serait confiée l’ensemble du contentieux relatif aux marchés financiers. Une telle réforme favoriserait l’harmonisation et la cohérence du système de sanction. / The persistence of financial frauds since the creation of the stock exchange has made it clear that sanctions are a fundamental aspect to ensure the effective functioning of financial markets. Currently, our sanction system relies, for the most part, on the action of the financial regulator, the Autorité des marchés financiers. At first sight, French law offers a very modern system. However, frauds keep on happening, affecting drastically the trust of the investors in the system. In order to improve our sanction system, the comparison with Canadian law has revealed to be very rewarding. It is possible to make our system more efficient by implementing a special jurisdiction, which would be responsible for all the financial markets disputes, in order to make our sanction system more coherent and unified.

Orientador: Marli Teixeira de Almeida Minhoni / Banca: Nilton Luiz de Souza / Banca: Edson Luiz Furtado / Banca: Mario Barreto Figueiredo / Banca: Sandra Farto Botelho Turfem / Resumo: O objetivo do presente trabalho visou avaliar a influência dos FMA Glomus etunicatum Becker & Gerd. e Glomus clarum Nicol. & Schenck, no desenvolvimento de plantas de alecrim e manjericão, bem como verificar a capacidade destas plantas micorrizadas em superar os danos causados pelo fungo Fusarium oxysporum Schecht. Plantas de alecrim (Rosmarinus officinalis L.) e de manjericão (Ocimum basilicum L.) foram inoculadas, separadamente, com G. etunicatum e G. clarum, em casa de vegetação, com temperatura de 26 l 20C e luminosidade de 3000 Lux. Utilizou-se substrato autoclavado composto por uma parte de areia e uma de terra; o inóculo constou de esporos [500 esporos de G.etunicatum (50 mL-1) de solo e 700 esporos de G.clarum (50 mL-1) de solo] e ainda fragmentos de raízes infectadas e micélio. Em cada tipo de planta inoculada foram avaliadas as seguintes variáveis: altura das plantas (AP), peso da matéria seca da parte aérea (MSPA), peso da matéria fresca das raízes (MFR), esporulação (E), colonização radicular (CR) e teor de macro e micronutrientes no substrato e nas plantas (TMm). Foi avaliada também a influência de G. etunicatum e G. clarum no controle de F. oxysporum em plantas de alecrim e manjericão. A inoculação do patógeno (concentração de 5 x 103 esporos mL-1) foi realizada, separadamente, em plantas de alecrim e de manjericão com 90 dias de micorrização (5 vasos com G. etunicatum e 5 vasos com G. clarum) e ainda plantas testemunhas, não micorrizadas (5 vasos). No alecrim, G. clarum mostrou-se significativamente mais eficiente do que G. etunicatum em AP, MSPA e E; por outro lado, G. clarum apresentou CR menor do que G. etunicatum. Em relação às plantas testemunha, G. clarum diferiu significativamente destas em 2 todos as variáveis analisadas, porém G. etunicatum não diferiu estatisticamente das plantas testemunha em AP e MSPA. No manjericão, em relação... (Resumo completo, clicar acesso eletrônico abaixo). / Abstract: The purpose of the present work had the objective of evaluating the influence of AMF Glomus etunicatum Becker & Gerd. and Glomus clarum Nicol. & Schenck on the rosemary and basil plants development and also concerning the capacity of the mycorrhizal plants in resisting the wilt caused by Fusarium oxysporum Schecht. For that, rosemary (Rosmarinus officinalis L.) and basil (Ocimum basilicum L.) plants were previously inoculated with G. etunicatum and G. clarum in greenhouse under the temperature of 26 l 20C and luminosity of 3000 Lux. The soil was sterilized and composed by one part of sand and one part of earth. The inoculum was composed by the fungi spores [500 spores of G. etunicatum in (50 mL-1) soil and 700 spores of G. clarum in (50 mL-1) soil] and micelium and roots fragments infected by the AMF. In each plant inoculated the following variables were evaluated: plant height (PH), plant dry weigt (PDW), roots fresh weight (RFW), sporulation rate (SR), root mycorrhizal percentage (RMP) and macro and micronutrients level (MmL) present in the plants and in the soil. The G. clarum and G. etunicatum influence in the control of F. oxysporum wilt in both plants was also evaluated. The inoculation of the pathogen (5x103 spores mL-1) was separatety realized in the rosemary and basil plants after 90 days of the mycorrhization (5 pots of G. clarum and 5 pots of G. etunicatum); the control was also composed by 5 pots without mycorrhization. In the rosemary, G. clarum was significantely more efficient than G. etunicatum in the variables PH, RFW and SR; although G. clarum 4 presented RMP smaller than G. etunicatum. In relation to the control, G. clarum was significably better to the plants in all the variables, although G. etunicatum do not differed statistically for the control plants in PH and PDW. For basil in all the analised variables G. clarum differed statistically from G. etunicatum and was similar to the control treatment in all the variables. / Doutor

Les travaux de recherches développés dans cette thèse concernent la réalisation de couchesminces, à partir de l’alliage à mémoire de forme (AMF) NiTi mécanoélaboré et de structurenanocristalline, en vue de leur intégration dans des microsystèmes. Le but est d’améliorer lespropriétés AMF de leurs homologues de structure microcristalline, dits conventionnels.Les techniques de caractérisation physico-chimiques (DRX, MET, MEB) nous ont permisd’une part, de suivre le mécanisme de formation de l’intermétallique B2-NiTi en fonction dutemps de broyage et d’autre part, de déterminer les paramètres microstructuraux à savoir, lataille des cristallites, le taux de microdéformations et la densité de dislocations des élémentspurs ainsi que ceux de la phase B2-NiTi. Ces paramètres révèlent le caractère nanocristallin etdésordonné des poudres broyées.Par ailleurs, nous avons fabriqué pour la première fois une cible B2-NiTi de structurenanocristalline, par l’intermédiaire d’une méthode alternative (mécanosynthèse et procédé deprojection à froid).Nous avons montré également qu’il est possible de déposer sous forme de couche mincel’intermétallique NiTi nanostructuré. Ce film mince d’épaisseur 447 nm a été déposé parpulvérisation cathodique à magnétron à partir de la cible élaborée par projection à froid (coldspray). / The research work developed in this thesis is related to preparing a thin film of NiTi shapememory alloy used to integrate into microsystems. The goal is to improve the properties oftheir counterparts of microcrystalline structure (conventional target).Physical and chemical techniques of characterization (XRD, TEM and SEM) have allowed onthe one hand, to follow the mechanism of intermetallic NiTi formation as a function ofmilling time and on the other hand, to determine the microstructural parameters : crystallitesize, the microstrain and dislocation density of the pure elements and the B2-NiTi phase.These parameters reveal the character of the disordered nanocrystalline of the milled powders.Furthermore, we fabricated a target of B2-NiTi nanocrystalline structure by an alternativemethod (mechanical alloying and cold spray).We also showed that it is possible to deposit the nanocrystalline NiTi intermetallic thin film.This film with a thickness of about 447 nm was deposited by magnetron sputtering techniquefrom the NiTi target.