Global ETD Search

11	Algoritmy zpracování obrazu v osmibitových procesorech / Image processing algorithms in eight-bit microcontroller Rébl, Miroslav January 2011 (has links) The aim of master thesis was to investigate a simple camera and processor Atmel AVR unit implementation. Thesis describes how to get image from C3088 module and management over the bank of camera registers. Work includes limitation draft for this way of processing the information. Thesis also solves an exemplary model for object recognition using this implementation.
12	Realizace impedančního analyzátoru / Construction of an impedance analyzer Slinták, Vlastimil January 2013 (has links) The aim of this master’s thesis is to build stand-alone impedance analyzer for mesasuring antennas’ impedance. The vector network analysis is used as measuring method. Analog (with directional coupler and gain and phase detector) and digital (with 8bit AVR microcontrollers) part of analyzer are described and then build.
13	Přístupový systém využívající BodyCom technologii / Access Control System using BodyCom Technology Křístel, Jan January 2014 (has links) This master's thesis is primarily focused on the design of an electronic access control system using the BodyCom technology. The first section describes the working principle of this technology and its influence on human body. The second section shows an application of this technology in construction options of the electronic access control system.
14	Maticov zobrazovac jednotka / Matrix display Gbik, Matej January 2015 (has links) The aim of this thesis is to implement autonomous information portal using matrix display BUSE BS210. The first part deals with the theoretical problem-solving and management options display. The second part is dedicated to the development of necessary hardware and the last part is the software described herein microcontroller and microcomputer Raspberry Pi.
15	Modulární kamerový přehledový systém / Modular CCD cameras surveillance system Řezníček, Radek January 2017 (has links) This thesis deals with realization of modular camera system. Introductory part is focused on market research and concept of the system. Next part is dedicated to the choice of components for realization of the system. Practical part deals firstly with design of printed circuit board for supporting control unit which will be controlling peripherals like motion sensor, IR illuminator, eventually magnetic door contact and also focuses on software creation for main and supporting control unit.
16	Lokalisering av skidor i lössnö : Självständigt arbete i Teknisk Fysik / Positioning of skis in powder snow : Independent Project in Engineering Physics Trella, Fredrik January 2011 (has links) This report studies the possibility of using some sort of radio sender and transmitter in order to position skis lost in powder snow. It is concluded that a RF-solution on the 433 MHz frequency should be the most efficient. Different forms of directional antennas are examined and studies show that in theory the best suited is the so called “Yagi-Uda antenna”. A solution based on using a Receive Signal Strength Indicator value together with the above mentioned directional antenna is developed. To control these different components microprocessors from Atmel is used. These are programmed in C and compiled with Atmel’s own compiler AVR Studio. Despite all efforts it is proven that the prototype does not perform in an adequate way. An alternative solution based on “byte-loss-rate” is then developed and the results are slightly improved. Nevertheless, the directional properties of the antenna are still too poor why other alternatives are discussed. No fully functioning prototype is achieved but good grounds for further development of the prototype into something that fulfills the specifications are produced. skis positining 433 Atmel ATMega AVR sender receiver byte loss rate RSSI Yagi RF USART UART USI skidor lokalisering positionering 433 Atmel ATMega AVR sändare mottagare byte loss rate RSSI Yagi RF USART UART USI
17	Digitalizace snímaní rozložení optické intenzity / Digitalization of the optical intensity distribution scanning Škrob, Robin January 2008 (has links) This Master’s thesis solves a design and construction of device for gathering and transfer of data into computer. The device should replace graph plotter, by which is measured the optical intensity of a laser beam. From this characteristic it is possible to determine other parameters of the laser beam, such as halfwidth of the beam, angle of divergence and Rayleigh length. The described device - “data gatherer” - measures two voltage values – voltage detected on photodiode and voltage detected on distance moved by photodiode. Measured values of voltage are processed and sent through a serial line into the computer. A pre-amplifier is connected to the control part for both channels of measured values with possibility of amplification. Computer application, which performs graphic interpretation of the measured values, serves as user control peripheral. The product of this project is compact device operating under OS Windows with graphic output.
18	From Theory to Implementation of Embedded Control Applications : A Case Study Fize, Florian January 2016 (has links) Control applications are used in almost all scientific domains and are subject to timing constraints. Moreover, different applications can run on the same platform which leads to even more complex timing behaviors. However, some of the timing issues are not always considered in the implementation of such applications, and this can make the system fail. In this thesis, the timing issues are considered, i.e., the problem of non-constant delay in the control of an inverted pendulum with a real-time kernel running on an ATmega328p micro-controller. The study shows that control performance is affected by this problem. In addition, the thesis, reports the adaptation of an existing real-time kernel based on an EDF (Earliest Deadline First) scheduling policy, to the architecture of the ATmega328p. Moreover, the new approach of a server-based kernel is implemented in this thesis, still on the same Atmel micro-controller. embedded electronics computer engineering control theory inverted pendulum real-time arduino atmel atmega328p atmega MATLAB wcet worst case execution time
19	Internet věcí v praxi / The Internet of Things in Practice Bajgl, Vojtěch January 2018 (has links) The subject of this diploma thesis, is the Internet of Things, and its use in applied practice, with a subsequent design of a custom system of smart home automatization. It acquaints the reader with the issues of automated home and smart systems, including a basic familiarization of regulations as declared by law about electronic devices. The attributes of miniature computer platforms, developmental boards, and wireless modules for the design of custom systems are analyzed and compared. The biggest part of the thesis is dedicated to a design of a custom system, specifically designing the central processing module and other controlling modules for controlling various electric home appliances. The main controlling unit of the system is a Raspberry Pi 2B unit, with which it is possible to control a device in a household through an user-friendly web application.
20	Realizace bezdrátové senzorové sítě s mikrokontroléry Atmel AVR / Wireless Sensor Network with Atmel AVR Microcontrollers. Mráz, Ľubomír January 2010 (has links) This diploma thesis describes the standard IEEE802.15.4 and Zigbee for wireless sensor networks. These norms are described in detail in the first two chapters. The main priority of the wireless sensor networks is to minimize the power of the devices and the price while maximizing the reliability of the data transfer. Minimum consumption is provided by the significantly lowered complexity in comparison to the standard wireless networks. Further, the design of the concept of the complex and universal hardware platform focused on intelligent building is described. Software implementation of those norms is described in the chapters five and six. Finally, comparison of the designed hardware platform and the other commercial platforms is described in the last chapter.

Search results