This Diploma Thesis is focused on investigation of the voltammetric behavior of the explosive penthrite (pentaerythritol tetranitrate) (PETN) and on searching for optimum conditions for its determination using differential pulse voltammetry (DPV) at a hanging mercury drop electrode (HMDE) (this part of the Diploma Thesis follows the topic investigated in the author's Bachelor Thesis; in this Diploma Thesis, the results of the Bachelor thesis are applied to the determination of PETN in environmental matrices) and at a mercury meniscus modified silver solid amalgam electrode (m-AgSAE) and on investigation of voltammetric behavior in real samples (deionized, drinking, and river water). For investigating the behavior of PETN in aqueous-methanolic media on the m-AgSAE, mixtures of Britton-Robinson buffers (BR-buffers) and methanol in various volume ratios were used. In non-aqueous media, methanolic solutions of tetramethylammonium bromide (TMAB), tetrabutylammonium iodide (TBAI), and tetrabutylammonium chloride (TBAC) were used as supporting electrolytes. Firstly, the influence of pH (in the range of 2 - 13) and methanol content (10 - 90 vol. %) on voltammetric responses of PETN was studied. The best response was obtained at each of those pH values at the volume ratio of BR-buffer - methanol of 1:9 or...

The submitted work deals with the application of voltammetric determination of Fomesafen using non-traditional mercury meniscus modified silver solid amalgam electrode on model samples of Fomesafen in real aqueous matrices of drinking and river water. This method of measurement has been developed and optimized in my bachelor thesis, which the diploma thesis is related to. Fomesafen belongs to a group of herbicides used on a mass scale in the late 20th century in the USA and in many countries around the world still used even today. Among its side effects according to the EPA include, among others, potential carcinogenicity to humans and confirmed carcinogenicity to some mammals (such as rats) which led to a legislative regulation on its use in many countries around the world including the USA, the European Union and many others. Silver solid amalgam electrode has been developed with the intention to limit the use of mercury in accordance with new legislation of the European Union and the concept of green analytical chemistry. Despite the low levels of mercury mainly bound in the form of virtually harmless silver amalgam electrode retains very similar electrochemical properties with proven mercury electrodes. As part of the thesis, direct determination of a number of partial extraction of Fomesafen...

Presented Diploma Thesis deals with the study of electrochemical behavior of 5-nitroimidazole (5-NI), with the search for optimal conditions for its determination using techniques of DC voltammetry (DCV) and differential pulse voltammetry (DPV) at a mercury meniscus modified silver solid amalgam electrode (m-AgSAE) and at a boron-doped diamond film electrode (BDDFE), and with the comparison of reached limits of quantification (LQs). The optimal conditions found for measuring calibration dependences of 5-NI at the m-AgSAE in deionized water were as follows: Britton-Robinson buffer of pH 7.0 and 10.0 for DCV and DPV, respectively. At both thechniques, it is advisable to use an electrochemical regeneration of the electrode surface by the application of a couple of regeneration potentials Ereg,1 = 0 mV and Ereg,2 = −800 mV. The calibration dependences were measured in the concentration range from 1·10−6 to 1·10−4 mol·l−1 , with the LQs of 1.0·10−6 mol·l−1 for DCV at the m-AgSAE and 1.5·10−6 mol·l−1 for DPV at the m-AgSAE. The concentration dependences of 5-NI at the BDDFE were measured using the DCV technique in the BR buffer of pH 3.0. For the DPV technique, the optimal medium seemed to be the BR buffer of pH 2.0, however, because of the presence of an interfering peak in the supporting electrolyte,...

This thesis deals with electrochemical behaviour of tauroursodeoxycholic acid (TUDCA) at silver solid amalgam electrode modified by mercury meniscus (m-AgSAE), polished silver solid amalgam electrode (p-AgSAE) and hanging mercury dropping electrode (HMDE). This thesis is a part of a bigger scientific research that deals with synthesis and characterization of supramolecular systems based on natural steroid compounds and its conjugates. TUDCA offers one reduction peak at m-AgSAE in the environment of Britton - Robinson buffer in range of pH 6.0 - 13.0. The potential of this peak is around −1200 mV. Using cyclic voltammetry was determined that the process on the electrode surface is quasireversible, the reduction is controlled by diffusion and the anodic process is controlled by adsorption. Concentration dependence measured at HMDE by direct current voltammetry in 0.04 mol∙l-1 borat buffer (pH 9.1) is linear in two concentration intervals - 1∙10-3 - 2∙10-4 mol∙l-1 and 1∙10-4 - 8∙10-6 mol∙l-1 of TUDCA. There was no linear dependence between the increase of concentration of TUDCA and the height of the peak obtained on amalgam electrodes by methods DC, DP, cyclic and "square-wave" voltammetry. On HMDE was in several short concentration intervals measured by a CV method a linear dependence of cathodic and...

The presented diploma thesis is devoted to study of determination of 4-nitrobiphenyl (4-NBP) in model river water by DC voltammetry (DCV) and differential pulse voltammetry (DPV) at m-AgSAE (diploma thesis relates to bachelor thesis, in it DCV and DPV methods for determination of 4-NBP in deionized water were developed). Limit of determination (LOD) is 2·10-7 mol·l-1 by DCV and 4·10-7 mol·l-1 by DPV. The adsorptive stripping DPV (AdSDPV) technique was tested to archive lower LOD the AdSDPV, optimal conditions were not found. Electrochemical behavior of 2-nitrobiphenyl (2-NBP) at m-AgSAE was studied. Optimal conditions for its determination by both techniques DCV and DPV were found in methanol-0,01 mol·l-1 LiOH (1:9) and in this medium peak current dependence in 1·10-7 mol·l-1 to 1·10-4 mol·l-1 2-NBP (LOD ≈ 2·10-7 mol·l-1 by DCV and 1·10-7 mol·l-1 by DPV) concentration range was measured. Developed methods were successfully tested for determination of 2-NBP in drinking and river water samples. For both mediums obtained LODs were 2·10-7 mol·l-1 by DCV and 1·10-7 mol·l-1 by DPV. AdSDPV technique was unsuccessfully tested to achieve lower LOD. Optimal conditions for simultaneous determination of 4-NBP and 2-NBP by DPV technique at m-AgSAE were found: methanol-0,25 mol·l-1 acetate buffer (pH = 6,0) 3:7....

Conselho Nacional de Desenvolvimento CientÃfico e TecnolÃgico / Tooth structure immediately adjacent to restorations is susceptible to secondary caries, which may be caused by imperfect adaptation of restorative materials and subsequent microorganism colonization. Therefore, in order to identify methods of preventing secondary caries and increasing clinical dental restoration durability, different restorative dental materials have been introduced and applied in dental clinics. Thus, this in situ study assessed the effects of different restorative materials on the microbiological composition of dental biofilm and evaluated their ability of protecting the adjacent enamel against acid attacks from bacterial activity. A double-blind, split-mouth design was performed in one phase of 14 days, during which, 20 volunteers wore intra-oral palatal devices with five human enamel slabs, which were extra-orally restored according to the manufacturerâs specifications, using one of the following materials: Filtek Z 250/Single Bond composite resin; Permite amalgam; Fuji II encapsulated resin-modified glass ionomer; Vitremer resin-modified glass ionomer and Ketac Molar conventional glass ionomer.. During the experimental period, all subjects used fluoride-containing dentifrice 3x/day and a 20% sucrose solution was dripped onto the slabs 8x/day in predetermined times. The biofilm formed on the slabs was analyzed to determine total and mutans streptococci as well as lactobacilli counts. Demineralization (delta S) was determined on enamel by cross-sectional microhardness at 20 and 70 -Âm from the restoration margin. In order to verify the differences among the treatments, Kruskal-Wallis and ANOVA followed by Minimum Squares test were applied for cariogenic microbiota and delta S, respectivly. No statistically significant differences were found in the cariogenic microbiota grown on the slabs. At 20-Âm distance, only Fuji II statistically differed from the other groups presenting the lowest demineralization. At 70-Âm, Fuji II significantly inhibited demineralization when compared to Permite, Filtek-Z-250 and Ketac Molar. Concluding, in the background of fluoride dentifrice and under the cariogenic exposure condition of this study, only the encapsulated resin-modified glass ionomer material provided additional protection against secondary caries. / A estrutura dentÃria imediatamente adjacente a restauraÃÃes à suscetÃvel ao surgimento de cÃrie secundÃria, que pode ocorrer devido a imperfeiÃÃes na adaptaÃÃo de materiais restauradores e subseqÃente colonizaÃÃo por microrganismos. Logo, com o objetivo de identificar os mÃtodos de prevenÃÃo da cÃrie secundÃria e aumentar a longevidade das restauraÃÃes, diferentes materiais restauradores tÃm sido introduzidos e usados na clÃnica odontolÃgica. Desta forma, este estudo in situ avaliou os efeitos de diferentes materiais restauradores na composiÃÃo microbiolÃgica do biofilme dental bem como a habilidade destes materiais em proteger o esmalte adjacente dos ataques Ãcidos provenientes da atividade bacteriana. Foi empregado um delineamento duplo-cego, âsplit-mouthâ realizado em uma fase de 14 dias, durante a qual, 20 voluntÃrios utilizaram dispositivos intra-orais palatinos com cinco blocos de esmalte dental humano que foram restaurados extra-oralmente, de acordo com as recomendaÃÃes do fabricante com um dos seguintes materiais: Resina composta Filtek Z250/Single Bond (grupo controle), AmÃlgama Permite, IonÃmero de vidro modificado por resina encapsulado Fuji II, IonÃmero de vidro modificado por resina Vitremer e IonÃmero de vidro convencional Ketac Molar. Durante o perÃodo experimental, os voluntÃrios utilizaram dentifrÃcio fluoretado, 3 vezes ao dia e gotejaram sobre os blocos, uma soluÃÃo de sacarose a 20%, 8 vezes ao dia em horÃrios prÃ-determinados. No 14o dia, o biofilme formado sobre os blocos foi removido para determinar a contagem de estreptococos totais e estreptococos mutans, bem como lactobacilos. A desmineralizaÃÃo (delta S) ao redor da restauraÃÃo foi avaliada atravÃs da anÃlise de microdureza em corte longitudinal do esmalte a 20 e 70 Âm da margem da restauraÃÃo. Para detectar as diferenÃas entre os tratamentos, foram aplicados os testes Kruskal-Wallis e ANOVA seguida do teste dos quadrados mÃnimos para a microbiota cariogÃnica e delta S, respectivamente. NÃo foram encontradas diferenÃas estatisticamente significativas na microbiota cariogÃnica formada sobre os blocos. Na distÃncia 20 Âm, somente o Fuji II diferiu estatisticamente dos outros grupos apresentando a menor desmineralizaÃÃo. A 70 Âm, o Fuji II inibiu significativamente a desmineralizaÃÃo quando comparado ao Permite, Filtek-Z-250 e Ketac Molar. Conclui-se que na situaÃÃo de uso de dentÃfricio flouretado associada ao desafio cariogÃnico do presente estudo, somente, o ionÃmero de vidro modificado por resina encapsulado apresentou uma proteÃÃo adicional contra o desenvolvimento de cÃrie secundÃria

<p>Danas, u raznim analitičkim laboratorijama postoji veći broj analitičkih protokola,<br />zasnovanih bilo na izuzetno sofisticiranim ili jednostavnijim tehnikama, koji služe za<br />određivanje različitih ciljnih analita od farmakolo&scaron;kog značaja. Među tim grupama ciljnih analita pripadaju i antibiotici koji predstavljaju veliko otkriće u oblasti medicine i zahvaljujući njima spa&scaron;eno je vi&scaron;e od sedam miliona života, ali pored navedenih koristi, antibiotici mogu da izazovu&nbsp; veliki broj neželjenih efekata i žučne kiseline zajedno sa svojim derivatima, koji su fiziolo&scaron;ki deterdženti, mogu biti citotoksične za organizam ako se njihova koncentracija ne kontroli&scaron;e. U ovoj doktorskoj disertaciji prikazan je razvoj analitičkih metoda pre svega voltametrijskihmetoda u kombinaciji sa jednostavnim i savremenim elektrodama/senzorima za određivanje&nbsp; odabranih analita kao &scaron;to je antraciklični antibiotik doksorubicin (DOX), makrolidni antibiotici<br />eritromicin-etilsukcinata (EES), azitromicina (AZI), klaritromicina (CLA) i roksitromicina&nbsp; (ROX) i 3-dehidro-deoksiholne kiseline.</p><p>Voltametrijska karakterizacija i određivanje gore navedenih antibiotika primenom obnovljive srebro-amalgam film elektrode (Hg(Ag)FE)rađena je direktnom katodnom&nbsp; voltametrijom sa pravougaonim talasima (SWV) i visoko osetljivom adsorptivnom voltametrijom sa pravougaonim talasima (SW-AdSV) u Briton-Robinson puferu, kao pomoćnom elektrolitu, obuhvatajući &scaron;irok opseg pH vrednosti. Odgovor DOX-a primenom&nbsp; Hg(Ag)FE&nbsp;praćen je u intervalu potencijala od -0,20 do -0,80 V.&nbsp; Za analizu tragova, optimizacija metode ukazuje da su optimalni parametri za analitički pik na potencijalu (Ep ) -0,57 V u odnosu na zasićenu kalomelovu elektrodu (ZKE): pH 6,0, potencijal&nbsp; akumulacije -0,20 V i vreme&nbsp; akumulacije 140 s. U model rastvoru, DOX je određivan u koncentracionom opsegu 4,99-59,64&nbsp; ng mL^-1. Razvijena SW-AdSV metoda je primenjena za određivanje DOX-a u obogaćenom uzorku humanog urina. Niža koncentracija DOX-a 9,89ng mL^-1&nbsp;u voltametrijskoj&nbsp; ćeliji je određivana sa relativnom standardnom devijacijom (RSD) manjom od 6,0%. &Scaron;to se ispitivanih makrolida tiče oni su pokazali redukcione signale u dalekoj negativnoj oblasti potencijala. Ispitivanja direktnom katodnom SWV rađena su u opsegu potencijala od -0,75 V do -2,00 V u odnosu na ZKE, pri čemu su dobijena jedan ili dva redukciona pika u opsegu potencijala od -1,5 V do -1,9 V. Oblik i intenzitet signala zavisi od primenjene pH vrednosti u &scaron;irokoj pH oblasti. Za analitičke svrhe, radi razvoja direktne katodne SWV i adsorptivne inverzne/striping SWV metode, pogodnim su se pokazale neutralna i slabo alkalna sredina tj. pH 7,0 sa&nbsp; E_p na -1,67 V u odnosu na ZKE za ROX i EES i pH 7,2 sa E_p na -1,85 V u odnosu na ZKE za AZI i pH 7,4 sa E_p na -1,64 V u odnosu na ZKE za CLA. Na osnovu snimljenih cikličnih voltamograma na&nbsp; optimalnim pH vrednostima, može se predložiti adsorptivno-kontrolisan kinetički proces na elektrodi u slučaju sva&nbsp; četiri ispitivana jedinjenja. Takođe,&nbsp; ¹H NMR merenja uz potiskivanje&nbsp; signala vode u pH oblasti između pH 6,0 i 10,5 ukazuju na to da su makrolidni molekuli pri optimalnim analitičkim uslovima predominantno u protonovanoj formi preko tercijerne amino grupe &scaron;to potpomaže, u sva&nbsp; četiri slučaja, njihovu adsorpciju na odgovarajuće polarizovanoj Hg(Ag)FE. Optimizovane direktne katodne SWV metode&nbsp; pokazuju dobru linearnost u koncentracionom opsegu 4,81-23,3&nbsp; &micro;g mL^-1 , 4,53-29,8&nbsp; &micro;g mL^-1 , 1,96-28,6&nbsp; &micro;g mL^-1 i 1,48-25,9 &micro;g mL^-1 za AZI, EES, CLA odnosno ROX. Razvijene SW-AdSV metode rezultiraju u linearnom odgovoru pri nižim koncentracionim intervalima 1,0-2,46 &micro;g mL^-1 ,&nbsp; 0,69-2,44&nbsp; &micro;g mL^-1, 0,05-0,99 &micro;g mL^-1 i 0,10-0,99&nbsp; &micro;g mL^-1 , za AZI, EES, CLA i ROX. RSD za sve razvijene metode nije veća od 1,5% izuzev SWV metode u slučaju AZI-a gde je 4,5%. Direktna katodna SWV metoda&nbsp; je uspe&scaron;no primenjena za određivanje EES-a u farmaceutskom proizvodu Eritromicin^&reg; dok SW-AdSV metoda je primenjena u slučaju određivanja EES-a u obogaćenom uzorku humanog urina i&nbsp;za određivanje ROX-a u farmaceutskom proizvodu Runac^&reg; . U svim pomenutim slučajevima, primenjena je metoda standardnog dodatka. Pouzdanost i tačnost elaboriranih procedura u slučaju određivanja EES-a u model sistemu i&nbsp; farmaceutskom proizvodu Eritromicin^&reg; su potvrđena poređenjem sa rezultatima dobijenim primenom HPLC-DAD metode.</p><p>Nakon preliminarnih studija 3-dehidro-deoksiholne&nbsp; kiseline/3-dehidro-deoksiholata primenom elektrode od staklastog ugljenika (GCE), gde je uočeno da ne dolazi do formiranja redukcionog signala u Briton-Robinson puferu između pH 5,0 i 11,8 primenom direktne katodne SWV, bizmut-film je izdvojen&nbsp; <em>ex situ</em> na povr&scaron;ini iste elektrode od staklastog ugljenika (BiF-GCE) iz uobičajeno kori&scaron;ćenog rastvora za elektrodepoziciju (0,02 mol L^-1 Bi(NO₃)₃, 1,0 mol L^-1 HCl i 0,5 mol L^-1 KBr) i tako pripremljena elektroda je primenjena za karakterizaciju i određivanje pomenutog jedinjenja u alkalnoj sredini. Redukcioni signal ispitivanog analita od analitičkog značaja je uočen jedino primenom BiF-GCE u Briton-Robinson puferusa pH vrednostima između 9,5 i 11,8 u režimu adsorptivne inverzne/stripingvoltametrije sa pravougaonim talasima, dok u slučaju direktnih katodnih SWV eksperimentalnih uslova uočen je slab redukcioni pik sa niskom strujom maksimuma pika. Optimizovani eksperimentalni uslovi za određivanje 3-dehidro-deoksiholata obuhvataju odgovarajuće kondicioniranje elektrode uključujući kondicioniranje&nbsp; <em>ex situ</em> pripremljene BiF-GCE u Briton-Robinson pomoćnom elektrolitu pH 11,8 do stabilizacije struje bazne linije elektrohemijskim cikliranjem potencijala radne elektrode u potencijalskom opsegu između -1,00 i -2,00 V u odnosu na ZKE (blizu 15 puta) i primenu dva ključna parametara adsorptivne voltametrije sa pravougaonim talasima: vreme akumulacije od 30 s i potencijal akumulacije&nbsp; -1,00 V u odnosu na ZKE. Zbog relativne asimetričnosti dobijenih redukcionih signala ispitivanog analita sa&nbsp; E_p na -1,35 V u odnosu na ZKE, &scaron;to je takođe prisutno i u slučaju primene SW-AdSV, određivanje ispitivanog analita je zasnovano na linearnoj zavisnosti između povr&scaron;ine pika redukcionog signala&nbsp; spitivanog analita i njegove odgovarajuće koncentracije i postignuta granica detekcije je 1,43 &micro;g mL^-1 sa dva linearna opsega kalibracione krive od 4,76 &micro;g mL^-1 do 13,0 &micro;g mL^-1 i od 13,0 &micro;g mL^-1 do 23,1 &micro;g mL^-1 za razvoj analitičke metode. RSD metode je 3,22%. Dodatni eksperimenti, elektroliza ispitivanog analita na potencijalu -1,55 V (blizu maksimuma pika ciljnog analita) u odnosu na ZKE su rađeni primenom GCE u obliku ploče (povr&scaron;ina 33,52 cm 2 ) modifikovane sa&nbsp; <em>ex situ&nbsp;</em>pripremljenim bizmut-filmom. Rastvor od interesa uzorkovan je na početku eksperimenta, nakon 2,5 h i nakon 4,5 h tretmana. Ovakvi uzorci su analizirani primenom ¹H NMR merenja uz potiskivanje signala vode u puferskom rastvoru pH 11,8. Može se pretpostaviti da tokom elektrolize 3-dehidro-deoksiholata dolazi do redukcije keto grupe prisutne u strukturi ispitivanog analita.</p><p>Na osnovu literaturnih podataka da neki od ciljnihmakrolidnih antibiotika kao &scaron;to je npr. azitromicin pokazuju oksidativno pona&scaron;anje na elektrodi od ugljenične paste i elektrodi od zlata deteljna karakterizacija i određivanje&nbsp; četiri makrolidna antibiotika rađena je primenom&nbsp; asične&nbsp;elektrode od ugljenične paste (CPE) koja se sastoji samo od grafitnog praha i parafinskog ulja sa optimizovanih direktnih anodnih SWV metoda. U slučaju EES-a i AZI-a diferencijalna pulsna voltametrija (DPV) je testirana za iste svrhe. Ključni&nbsp; parametar u slučaju razvoja analitičkih voltametrijskih metoda je odabir pH vrednosti pomoćnog elektrolita gde je oblik/simetričnost i intenzitet oskidacionog pika glavni kriterijum prilikom odabira. Kao odgovarajuće pH vrednosti za voltametrijsko određivanje EES-a primenom SWV metode odabrana je pH 8,0 sa E_p na 0,83<br />V u odnosu na ZKE, dok u slučaju DPV metode pH 12,0 sa&nbsp; E_p na 0,55 V u odnosu na ZKE je bila najpogodnija za analitičke svrhe. Za određivanje AZI-a, u slučaju obe SWV i DPV metode pH 7,0 se pokazala najpogodnijom sa E_p analitičkog signala na 0,85 V odnosno 0,80 V u odnosu na ZKE, dok u slučaju CLA i ROX koji su ispitivani samo primenom SWV metode za analitičke svrhe pH 12,0 je bila najpogodnija sredina sa E_p analitičkog signala na 0,65 V odnosno na 0,63 V&nbsp;u odnosu na ZKE. Postignute granice detkcije primenom nemodifikovane CPE i direktne anodne SWV su uglavnom u submikrogramskom koncentracionom opsegu 0,17 &micro;g mL^-1 , 0,32&nbsp; &micro;g mL^-1 i 0,30&nbsp; &micro;g mL^-1, u slučaju EES-a, AZI-a i ROX-a i u niskom mikrogramskom koncentracionom opsegu 1,43&nbsp; &micro;g mL^-1 za CLA. Razvijena SWV metoda sa jednostavnom CPE pokazala se pogodnom za određivanje ROX-a u komercijalnom proizvodu Runac^&reg; tableti. U slučaju optimizovanih DPV metoda postignute granice detekcije za EES i AZI su u niskom mikrogramskom&nbsp; koncentracionom opsegu 1,03&nbsp; &micro;g mL^-1 odnosno 1,53&nbsp; &micro;g&nbsp; mL^-1 . U želji da se&nbsp;postigne niža granica detekcije za AZI, DPV metoda&nbsp; je testirana u kombinaciji sa&nbsp; CPE radnom elektrodom povr&scaron;inski modifikovanom sa zlatnim nanočesticama&nbsp; prečnika 10 nm (Au-CPE) i&nbsp; postignuta granica detekcije je 0,95&nbsp; &micro;g mL^-1 sa&nbsp; E_p analitičkog signala na 0,80 V u odnosu na&nbsp; ZKE. RSD metode u slučaju Au-CPE je 3,5%, dok je u slučaju nemodifikovane CPE 6,0%.&nbsp; Linearnost analitičke metode zasnovane na primeni Au-CPE je dva puta &scaron;ira nego u slučaju&nbsp; primene nemodifikovane CPE.</p><p>Na osnovu dobijenih rezultata može se zaključiti da&nbsp; odgovarajuće kombinacije&nbsp; optimizovanih voltametrijskih tehnika sa ekolo&scaron;ki prihvatljivim i lako primenljivim radnim&nbsp; elektrodama, kao &scaron;to su Hg(Ag)FE, BiF-GCE i CPE zajedno sa Au-CPE, rezultuju razvojem&nbsp; pouzdanih analitičkih metoda, kako u oksidacionim tako i u redukcionim proučavanjima, koje&nbsp; često omogućuju&nbsp; određivanje tragova analita od farmakolo&scaron;kog značaja u jednostavnim, a u&nbsp;nekim slučajevima i u složenim sistemima.&nbsp;</p> / <p>Nowadays in different analytical laboratories there is the increasing number of analytical protocols, either based on highly sophisticated or simpler measurements techniques, which serving for determination of different target analytes of pharmacological importance. Among such target groups of the analyte belongs the antibiotics which present a great discovery in the field of medicine and thanks to them were saved more than seven million people but beside to the mentioned great benefits, antibiotics can cause a large number of side effects and bile acids together with their derivatives which are physiological detergents but if their concentration is not<br />controlled they can be cytotoxic to the body. In the present doctoral dissertation the development of analytical methods, primarily analytical voltammetric methods in combination with simple and contemporary electrodes/sensors, for the determination of selected analytes as antracycline antibiotic doxorubicin (DOX), macrolide antibiotics erythromycin ethylsuccinate (EES), azithromycin (AZI), clarithromycin (CLA) and roxithromycin (ROX) and 3-dehydrodeoxycholic acid were performed.</p><p>Voltammetric characterization and determination of the above mentioned antibiotics using a renewable silver-amalgam film electrode (Hg(Ag)FE) was performed by direct cathodic square-wave voltammetry (SWV) and by highly sensitive adsorptive square-wave voltammetry (SW-AdSV) in aqueous Britton-Robinson buffer solutions as supporting electrolyte covering the wider pH range. The Hg(Ag)FE response of DOX was monitored in the potential range between -0.20 and -0.80 V. For the trace level analysis the method optimization showed that the optimal conditions for the analytical peak with peak potential (E_p) at -0.57 V vs. SCE were: the pH 6.0, the accumulation potential -0.20 V, and the accumulation time 140 s. In the model solutions, DOX was determined in the concentration range of 4.99-59.64 ng mL^-1. The developed SWAdSV method was applied for the determination of DOX in spiked human urine sample. The lowest concentration of DOX of 9.89 ng mL^-1 in voltammetric vessel was determined with the relative standard deviation (RSD) less than 6%. As for the investigated macrolides, they showed reduction signals in fairly negative potential range. During direct cathodic SWV investigations conducted over the potential range from -0.75 V to -2.00 V vs. SCE, either one or two reduction peaks were obtained in the&nbsp; potential range from -1.5 to -1.9 V. For analytical purposes concerning the development of direct cathodic SWV and adsorptive stripping SWV methods the neutral&nbsp; and slightly alkaline media were suitable as pH 7.0 with E_p at -1.67 V vs.&nbsp; SCE for ROX and EES and pH 7.2 and pH 7.4 with E_p at -1.85 V and -1.64 V vs. SCE for AZI and CLA, respectively. Based on the cyclic voltammograms recorded at these pH values, adsorptioncontrolled electrode kinetics process can be proposed for all four investigated compounds. The water suppressed ¹H NMR measurements in the pH range between 6.0 and 10.5 indicated that the macrolide molecules at the optimal analytical conditions are predominantly in protonated form via their tertiary amino groups which supported in all four cases their adsorption on the appropriately polarized Hg(Ag)FE electrode. The optimized direct cathodic SWV methods showed good linearity in concentration ranges 4.81-23.3 &mu;g mL^-1, 4.53-29.8 &mu;g mL^-1, 1.96-28.6&nbsp; &mu;g mL^-1, and 1.48-25.9 &mu;g mL^-1 for AZI, EES, CLA and ROX, respectively. The SW-AdSV methods resulted in the linear responses at lower concentration ranges as 1.0-2.46 &mu;g mL^-1, 0.69- 2.44 &mu;g mL^-1, 0.05-0.99 &mu;g mL^-1 and 0.10-0.99 &mu;g mL^-1, for AZI, EES, CLA and ROX, respectively. The RSD for all developed methods was not higher than 1.5% except the SWV method for AZI with 4.7%. The direct cathodic SWV method was successfully applied for the determination of EES in the pharmaceutical preparation Eritromicin^&reg;, while SW-AdSV was tested in the case of the spiked urine sample and for determination of ROX in pharmaceutical preparation Runac^&reg;. In all above cases, the standard addition method was used. The reliability and accuracy of the above procedures in the case of EES determination in model system and pharmaceutical preparation Eritromicin^&reg; were validated by comparing them with those obtained by means of HPLC-DAD measurements.</p><p>After initial study of 3-dehydro-deoxycholic acid/3-dehydro-deoxycholate by glassy carbon electrode, where the absence of any reduction peak was observed in the Britton-Robinson buffer solutions between pH 5.0 and 11.8 by direct cathodic SWV, a bismuth-film was electrodeposited ex situ on the same glassy carbon electrode surface (BiF-GCE) from the usually used plating solution (0.02 mol L^-1 Bi(NO₃)₃, 1.0 mol L^-1 HCl and 0.5 mol L^-1 KBr) and such prepared film-electrode was applied for the characterization and determination of the the target analyte in alkaline media. The reduction signal of analytical importance was observed only by BiF-GCE in Britton-Robinson buffer solutions with pH values between 9.5 and 11.8 in adsorptive stripping square-wave voltammetry working regime, while in the case of the direct cathodic SWV experimental protocol only a very poor reduction peak was obtained. The optimized experimental conditions for the 3-dehydro-deoxycholate determination consist of the optimized electrode conditioning including the electrochemical cycling of the <em>ex situ </em>prepared BiF-GCE potentials in the potential span between -1.0 and -2.0 V vs. SCE (nearly 15 times) in the Britton-Robinson supporting electrolyte pH 11.8 till the stabilization of the baseline current, and the application of two key parameters of the adsorptive square-wave voltammetric protocol: the accumulation time as 30 s and accumulation potential as -1.0 V vs. SCE. Because of the relative asymmetry of the obtained reduction signals of the target analyte with peak E_p at -1.35 V vs. SCE, which is still present in the case of the SW-AdSV, the quantification of the target analyte was based on the linear correlation between peak area of the reduction signal and its appropriate concentrations, and reached limit of detection is 1.43 &mu;g mL^-1 and with two linear ranges of calibration curve from 4,76 &mu;g mL^-1 to 13.0 &mu;g mL^-1 and from 13,0 &mu;g mL^-1 to 23,1 &mu;g mL^-1 for the development of analytical method. The RSD of the method&nbsp; was 3.22%. Additional experiments were performed applying GCE with rectangular form (area 35.32 cm²) modified with ex situ prepared bismuth-film for the electrolysis of the target analyte which was performed at the potential -1.55 V (nearly the peak maxima of the target analyte) vs. SCE. The solution of interest was sampled at the beginning of the experiment, after 2.5 h and after 4.5 h of treatment. Such samples were analysed by simply water suppressing ¹H NMR measurements in the buffered solution at pH 11.8. It can be assumed that during electrolysis of 3-dehydrodeoxycholate the reduction of the keto group present in the structure of the target analyte can be occurred.</p><p>Driven by earlier literature data about the fact that some of the target macrolide antibiotics as e.g. azithromycin showed oxidation behavior at a carbon paste and gold working electrodes detailed characterization and determination of four target macrolide antibiotics were performed on classical carbon paste electrode (CPE) constituted only from graphite powder and paraffin oil with optimized direct anodic SWV methods. In the cases of EES and AZI differential pulse voltammetric (DPV) methods were tested for the same purpose as well. The key parameter in the case of the development of the analytical voltammetric methods is the selection of the pH value of the supporting electrolyte where the shape/simmetry and intensity of the oxidation peak were the criteria. As the appropriate pH value for determination of EES by SWV method the pH 8.0 was selected with E_p at 0.83 V vs. SCE while in the case of the DPV method the pH 12.0 with E_p at 0.55 V vs. SCE was the most suitable for analytical&nbsp; purpose. As for AZI determination, in the case of both SWV and DPV methods the pH 7.0 was the most appropriate supporting electrolyte with the Ep of analytical signal at 0.85 V and 0.80 V vs. SCE, respectively, while in the case of CLA and ROX which were investigated only with SWV method for the analytical purposes the pH 12.0 was the most suitable with E_p at 0.65 V and at 0.63 V vs. SCE. The obtained detection limits applying the bare CPE and the direct anodic SWV are mainly&nbsp; in submicrogram concentration range as 0.17 &mu;g mL^-1; 0.32 &mu;g mL^-1 and 0.30 &mu;g mL^-1 for EES, AZI, and ROX and in the low microgram concentration range as 1.43 &mu;g mL^-1 for the CLA, respectively. The developed method succesfully tested for the determination of ROX in the commercial formulation, Runac^&reg; tablet. In the case of the optimized DPV methods the obtained detection limits for EES and AZI are in the low microgram concentration range 1.03 &mu;g mL^-1 and 1.53 &mu;g mL^-1, respectively. For the improvement of the sensitivity for AZI the DPV method was tested in combination with a&nbsp; CPE working electrode surface modified with gold nanoparticles with diameter of 10 nm (Au-CPE) and reached the limit of detection was 0.95 &mu;g mL^-1 at E_p of 0.80 V vs. SCE. The RSD of the method in the case of the Au-CPE is 3.5% while in the case of the native CPE 6.0%. The linearity of the Au-CPE based analytical method is twice wider then it is case with the bare CPE applying protocol.</p><p>Based on the obtained results it can be conclude that the appropriate combination of the optimized voltammetric pulse techniques and the environmentally friendly and easy to use working electrodes as Hg(Ag)FE, BiF-GCE and CPE together with Au-CPE resulted in the development of reliable analytical method either in the oxidation or reduction studies, often allowing trace level determination of pharmacological importance target analytes in simpler and in some case complexes systems.</p>

This Diploma Thesis is focused on study of electrochemical behavior of 2,4,6-trinitrotoluene (TNT) and 2,4,6-trinitrophenol (picric acid) on finding the optimum conditions for their determination using direct current voltammetry (DCV) and differential pulse voltammetry (DPV) at a mercury meniscus modified silver solid amalgam electrode (m-AgSAE) in the solution of Britton-Robinson (BR) and on finding of the limit of quantification (LQ) for these substances. Practical applicability of the newly developed methods was verified on direct determination of TNT and picric acid in model samples of drinking and river water. Moreover, the electrochemical behaviors of TNT and picric acid was studied using cyclic voltammetry (CV). Optimum medium for the determination of TNT at m-AgSAE was: methanol-BR buffer pH 4.0 (1:9). Upon the DCV it is proper to apply regeneration potentials Ereg,1= 0 mV and Ereg,2= -1100 mV and upon the DPV was apply regeneration potentials Ereg,1= 0 mV and Ereg,2= -600 mV were applied. The concentration dependence of the peak current was found to be linear for both techniques over the concentration range of 1·10-6 -1·10-4 mol/l with LQ of 0.54 µmol/l (for DCV) and 0.46 µmol/l (for DPV). The method developed for the determination of TNT were verified on the model samples of drinking...

The aim of presented Diploma Thesis was to study an electrochemical behavior of nitroimidazole drugs metronidazole and ornidazole and to find optimal conditions for their voltammetric determination at a mercury meniscus modified silver solid amalgam electrode using DC voltammetry (DCV) and differential pulse voltammetry (DPV). Voltammetric behavior of selected drugs was investigated in dependence on the pH of the medium used (realized using a Britton-Robinson buffer (BR buffer)) and a mechanism of the reduction of both drugs was investigated using cyclic voltammetry (CV). The optimum medium for voltammetric determination of studied nitroimidazole drugs at the m-AgSAE in a region of cathodic potentials was found to be the BR buffer of pH 8.0. Then, the concentration dependences were measured in this optimum medium in the concentration range from 2·10-7 mol/L to 1·10-4 mol/L. The limits of quantification (LQs) for both metronidazole and ornidazole were found in the concentration order of 10-7 mol/L by using DCV and DPV at the m-AgSAE. The applicability of the newly developed voltammetric methods of the determination of nitroimidazole drugs was verified on the model samples of drinking and river water, with LQ ≈ 2·10-7 mol/L for both DC voltammetry and differential pulse voltammetry at the m-AgSAE....

Diploma thesis deals of nanostructured surfaces, nanoparticles and electrochemical characterization methods such as cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy. The aim of this thesis is a theoretical research issues of production and characterization nanostructured modified electrodes. The practical part is the production of biomodified nanostructured electrodes by anodi- zation W/Al layers with galvanic deposition of gold or deposition of mercury, a modifi- cation of the electrodes by 11-mercaptoundecanoic acid and by bovine serum albumin (BSA). The thesis includes SEM images of nanostructured electrodes contact angle mea- surements of these electrodes and form an electrical circuit with subsequent simulation waveforms.