Les polysaccharides amphiphiles sont constitués d’un squelette hydrophile sur lequel sont greffés des groupements hydrophobes. Ils possèdent des propriétés rhéologiques accrues dues à leur capacité d’auto-organisation en solution aqueuse mais également interfaciales dues à leurs propriétés d’adsorption aux interfaces eau/huile. Néanmoins, peu d’études s’intéressent à conférer ce type de propriétés à des polysaccharides complexes en termes de structure ou de conformation, comme le xanthane. En effet, ce polymère adopte en solution deux conformations distinctes selon les conditions expérimentales : une forme ordonnée hélicoïdale rigide et une forme désordonnée de type pelote flexible.Partant de ce constat, l’objectif de ce travail de thèse est de déterminer l’impact de la rigidité du squelette du xanthane modifié hydrophobiquement sur les propriétés amphiphiles en solution mais également sur les propriétés stabilisantes en émulsion.Il s’avère que la conformation adoptée par le polymère pendant le processus de greffage a un impact majeur sur ses propriétés rhéologiques : le xanthane modifié sous forme désordonnée possède un caractère associatif, contrairement au xanthane modifié sous forme ordonnée.De plus, le xanthane modifié hydrophobiquement est capable, sous certaines conditions, de former et de stabiliser des émulsions H/E, sans ajout de tensioactif moléculaire, en se partitionnant entre stabilisation de l’interface eau/huile et maintien de la viscosité de la phase aqueuse continue. / Amphiphilic polysaccharides are composed of a hydrophilic backbone grafted with hydrophobic moieties. They show specific rheological properties due to their capacity to self-associate in solution, but also interfacial properties due to their ability to adsorb at the water/oil interface. However, only few studies describe the chemical modification of complex heteropolysaccharides regarding their structure or their conformation, such as xanthan. Indeed, this polysaccharide can adopt in solution two distinct conformations depending on experimental conditions: an ordered rigid helix or a disordered flexible coil.The objective of this work is to determine the impact of the chain stiffness of hydrophobically modified xanthan on associative properties in solution, but also on stabilizing properties in emulsion.The conformation adopted by the polymer during the grafting procedure has a major impact on the rheological properties: xanthan modified under disordered conformation is an associative polysaccharide, contrary to xanthan modified under its ordered conformation.In addition, hydrophobically modified xanthan is able, under certain conditions, to form and stabilize O/W emulsion, without further addition of molecular surfactant, by partitioning between stabilization of the water/oil interface and viscosifying the continuous aqueous phase.

Pullulan is a non-ionic water-soluble polysaccharide which is produced from starch by the yeast-like fungus Aureobasidium pullulans. Pullulan is known for its non-toxicity and biocompatibility. Most pullulan modifications are intended to reduce its water solubility or to introduce charged or reactive groups for functionality. Polysaccharides that have been hydrophobically modified and contain carboxyl groups are commonly used in drug delivery systems because of their ability to provide pH-controlled drug release. We demonstrated in this dissertation the regioselective synthesis of a range of 6-carboxypullulan ethers that are promising anionic derivatives for drug delivery applications. These compounds have also shown impressive surfactant properties. Another class of pullulan derivatives was synthesized by regioselective introduction of amine and amide groups to the pullulan backbone. These chemical groups are known to play a fundamental role in the biological activity of important polysaccharides, such as chitin and chitosan, therefore, the pullulan derivatives synthesized herein, which are structural isomers of those polymers, possess great potential for biomedical applications. Clarithromycin (CLA) is an aminomacrolide antibiotic whose physical properties are fascinating and challenging. It has very poor solubility at neutral intestinal pH, but much higher solubility under acidic conditions. Therefore, CLA dissolves better in the stomach than in the small intestine; but CLA is also quite labile towards acid-catalyzed degradation. We report herein a study on amorphous solid dispersion (ASD) of CLA with promising carboxyl-containing cellulose derivatives, both as macro and nanoparticles. This approach was intended to improve CLA solubility in neutral media, to protect it from acid degradation, and thereby increase its uptake from the small intestine and ultimately its bioavailability. We have also prepared ASDs of selected anti-HIV drugs, ritonavir (RTV), efavirenz (EFV) and etravirine (ETR) with the cellulosic derivative carboxymethyl cellulose acetate butyrate (CMCAB). This polymer was efficient in stabilizing RTV and EFV in their amorphous form in the solid phase and all ASDs provided significant enhancement of drug solution concentration. / Ph. D.

Poly (2-ethyl-2-oxazoline)-based amphiphilic diblock copolymer has the potential to form promising membrane materials for water purification due to the thermal stability and good solubility in aqueous solution and also for gas separation because of the presence of polar amide group along the polymer backbone. Moreover, their self-assembly into micelles renders them candidate materials as nanocarriers for drug delivery applications. In this study, a novel well-defined linear PEtOx-based amphiphilic diblock copolymer with a hydrophobic fluoropolymer, i.e., PVDF, have been successfully synthesized by implementing a synthesis methodology that involves the following four steps. In the first step, poly (2-ethyl-2-oxazoline) (PEtOx) was synthesized via living cationic ring-opening polymerization (LCROP) of 2-ethyl-2-oxazoline (EtOx) monomer. The “living” nature of LCROP allows the desirable termination to occur by using the proper termination agent, namely, water, to achieve the polymer with a terminal hydroxyl group, i.e., PEtOx-OH. The hydroxyl end group in PEtOx-OH was converted to PEtOx-Br using 2-bromopropionyl bromide via an esterification reaction. In the third step, the PEtOx-Br macro-CTA was subsequently reacted with potassium ethyl xanthate to insert the necessary RAFT agent via nucleophilic substitution reaction to obtain PEtOx-Xanthate. It s worth mentioning that this step is vital for the sequential addition of the second block via the RAFT polymerization reaction of fluorinated monomer, i.e., VDF, to finally obtain the well-defined amphiphilic diblock copolymer with variable controlled chain lengths. Proton Nuclear Magnetic Resonance Spectroscopy (1H-NMR) and Fourier Transform Infrared Spectroscopy (FT-IR) confirmed the structure of the macroinitiator and final copolymer, respectively. Size Exclusion Chromatography (SEC) determined the number-average molecular weight (Mn) and the polydispersity index (PDI) of the obtained copolymer. Furthermore, the polymorphism of the diblock copolymer characterized by X-Ray Diffraction (XRD) indicated that the copolymer displays the electroactive α-phase. The resultant amphiphilic diblock copolymer exhibits spherical micelles morphology, as confirmed by Dynamic Light Scattering (DLS) and Atomic Force Microscopy (AFM). Moreover, Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) investigated the thermal decomposition behavior of the copolymer and determined the glass transition temperature (Tg ≈ 70 °C), melting temperature (Tm ≈ 160-170 °C), and crystallization temperature (Tc ≈ 135-143 °C) of the diblock copolymer, respectively.

1-D and 2-D organic nanostructures formed by supramolecular self-assembly on HOPG(0001)from molecules containing amide and carboxylic moieties have been investigated with scanning tunneling and force microscopy operated in ambient conditions. A Precise determination of the structure of the monolayer of arachidic acid on graphite was found from moire pattern resulting from tunneling current contributions from both the monolayer and the substrate. Wedge-shaped benzamide amphiphilic molecules deposited on HOPG mainly showed 1-D structures. Systematically varied molecular geometry and head groups reveal the architecture of nanowires which are distinctly different from their columnar mesophase in solution.

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第18949号 / 工博第3991号 / 新制||工||1615(附属図書館) / 31900 / 京都大学大学院工学研究科材料化学専攻 / (主査)教授 木村 俊作, 教授 瀧川 敏算, 教授 秋吉 一成 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第20578号 / 工博第4358号 / 新制||工||1677(附属図書館) / 京都大学大学院工学研究科材料化学専攻 / (主査)教授 木村 俊作, 教授 瀧川 敏算, 教授 秋吉 一成 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21778号 / 工博第4595号 / 新制||工||1716(附属図書館) / 京都大学大学院工学研究科材料化学専攻 / (主査)教授 木村 俊作, 教授 瀧川 敏算, 教授 大内 誠 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

All organisms have cell membranes which are composed of lipids. The length of lipids affects the elastic properties of the cell membrane which play an important role in cell's survival. For instance, membrane flexibility controls the amount of stress that a membrane can sustain before pore formation. In the bacterial cell membranes, the pore formation is also induced by naturally occurring peptides and synthetic amphiphilic copolymers. For this reason, they are one of the most anticipated novel antimicrobial materials. Understanding the mechanism of their action is essential for their use against microbes. Using coarse-grained simulations and a mean field model, we study lipid bilayer membranes under the variation of stress and tail length, as well as their interaction with flexible amphiphilic copolymers. We used a polymer brush model to describe the free energy of the membrane in terms of entropic contributions and hydrophobic interactions. As the stress is increased on the membranes, at high stresses, the membrane transits to a stable pore state in agreement with simulation results. The increased hydrophobic interaction energy at the interface at high stresses leads to the formation of a pore. The hydrophobic interactions induce a contraction stress and the entropy of lipid tails induces a repulsive stress on the membrane. The simulations show that the entropic contribution to the stress, at its positive values, decreases as the length of lipid tails is increased. This increases the tendency of the membrane with the longer lipids to withstand larger stresses before rupturing into pores, as the internal repulsive stress is reduced. We show that copolymers can enhance the pore stability by decreasing the line tension due to the weak adsorption along the rim of the pore. The bilayers studied in our simulations do not require high copolymer concentration at the pores nor any self-organization of the copolymers to open the pore. This is in contrast to the commonly known barrel stave model where the copolymers are assumed to be strongly localised at the rim of the pore. In the presence of the copolymers, we observe a meta-stable pore state of membrane. This happens at a specific concentration of copolymers depending upon the stress acting on the membrane. If the concentration is further increased from this value, then, the membrane shifts to a stable pore state. An increase in the probability of pore formation is observed as the length of copolymers or stress on the membrane are increased. Both the solvent and copolymer permeability increase as the pore becomes stable.

No description available.

No description available.