Global ETD Search

1	An energy efficient TCAM enhanced cache architecture Surprise, Jason Mathew 29 August 2005 (has links) Microprocessors are used in a variety of systems ranging from high-performance super computers running scientific applications to battery powered cell phones performing realtime tasks. Due to the large disparity between processor clock speed and main memory access time, most modern processors include several caches, which consume more than half of the total chip area and power budget. As the performance gap between processors and memory has increased, the trend has been to increase the size of the on-chip caches. However, increasing the cache size also increases its access time and energy consumptions. This growing power dissipation problem is making traditional cooling and packaging techniques less effective thus requiring cache designers to focus more on architectural level energy efficiency than performance alone. The goal of this thesis is to propose a new cache architecture and to evaluate its efficiency in terms of miss rate, system performance, energy consumption, and area overhead. The proposed architecture employs the use of a few Ternary-CAM (TCAM) cells in the tag array to enable dynamic compression of tag entries containing contiguous values. By dynamically compressing tag entries, the number of entries in the tag array can be reduced by 2N, where N is the number of tag bits that can be compressed. The architecture described in this thesis is applicable to any cache structure that uses Content Addressable Memory (CAM) cells to store tag bits. To evaluate the effectiveness of the TCAM Enhanced Cache Architecture for a wide scope of applications, two case studies were performed ?? the L2 Data-TLB (DTLB) of a high-performance processor and the L1 instruction and data caches of a low-power embedded processor. Results indicate that a L2 DTLB implementing 3-bit tag compression can achieve 93% of the performance of a conventional L2 DTLB of the same size while reducing the on-chip energy consumption by 74% and the total area by 50%. Similarly, an embedded processor cache implementing 2-bit tag compression achieves 99% of the performance of a conventional cache while reducing the on-chip energy consumption by 33% and the total area by 10%. TCAM compression cache low-power area efficient energy efficient
2	An Area Efficient 10-bit Time Mode Digital- to- Analog Converter with Current Settling Error Compensation Technique Ravikumar, Nivethithaa 15 September 2015 (has links) No description available. Electrical Engineering area efficient error compensation hybrid DAC
3	Exploration Of Energy And Area Efficient Techniques For Coarse-grained Reconfigurable Fabrics Yadav, Anil 12 1900 (has links) Coarse-grained fabrics are comprised of multi-bit configurable logic blocks and configurable interconnect. This work is focused on area and energy optimization techniques for coarse-grained reconfigurable fabric architectures. In this work, a variety of design techniques have been explored to improve the utilization of computational resources and increase energy savings. This includes splitting, folding, multi-level vertical interconnect. In addition to this, I have also studied fully connected homogeneous and heterogeneous architectures, and 3D architecture. I have also examined some of the hybrid strategies of computation unit’s arrangements. In order to perform energy and area analysis, I selected a set of signal and image processing benchmarks from MediaBench suite. I implemented various fabric architectures on 90nm ASIC process from Synopsys. Results show area improvement with energy savings as compared to baseline architecture. Domain-specific reconfigurable factrics low energy designs area-efficient coarse-grained fabrics
4	Performance enhancement techniques for low power digital phase locked loops Elshazly, Amr 16 July 2014 (has links) Desire for low-power, high performance computing has been at core of the symbiotic union between digital circuits and CMOS scaling. While digital circuit performance improves with device scaling, analog circuits have not gained these benefits. As a result, it has become necessary to leverage increased digital circuit performance to mitigate analog circuit deficiencies in nanometer scale CMOS in order to realize world class analog solutions. In this thesis, both circuit and system enhancement techniques to improve performance of clock generators are discussed. The following techniques were developed: (1) A digital PLL that employs an adaptive and highly efficient way to cancel the effect of supply noise, (2) a supply regulated DPLL that uses low power regulator and improves supply noise rejection, (3) a digital multiplying DLL that obviates the need for high-resolution TDC while achieving sub-picosecond jitter and excellent supply noise immunity, and (4) a high resolution TDC based on a switched ring oscillator, are presented. Measured results obtained from the prototype chips are presented to illustrate the proposed design techniques. / Graduation date: 2013 / Access restricted to the OSU Community at author's request from July 16, 2012 - July 16, 2014 Phase locked loops Delay locked loops Supply noise mitigation background calibration Digital PLL Supply noise Time to digital converter TDC Switched ring oscillator SRO-TDC Digital circuits Low power Area efficient Digitally controlled oscillator Performance enhancement techniques Integrated circuits Frequency synthesizers Clock multipliers Integrated circuits Microelectronics Analog and mixed Circuits and systems Analog Digital Solid state circuit Phase-locked loops Electronic noise -- Prevention Low voltage systems Frequency synthesizers

1

Page generated in 0.0779 seconds