Middle-Late Ordovician Mt. Wilson Quartzite, southern British Columbia, Canada, is a supermature quartz arenite deposited in shallow marine-marginal marine environments on the Early Paleozoic western Laurentian passive margin. Facies-stacking patterns indicate the Mt. Wilson Quartzite is an unconformity bounded, 2nd-order depositional sequence, containing two 3rd-order sequences, and numerous parasequences. Detrital zircon age spectra of six samples of the Mt. Wilson Quartzite have numerous peaks that are unique to Middle to Late Ordovician quartz arenites of western Laurentia. The main peaks, 1800-2000 Ma, 2000-2200 Ma, and 2300-2400 Ma are interpreted to have been derived from basement rocks that were exposed east of the study area: Trans-Hudson Orogeny (1800-2000 Ma), Taltson Orogen (1800-2000 Ma), Buffalo Head Terrane (2000-2400 Ma), Paleoproterozoic crust (2000-2400 Ma), and the Wopmay Terrane (2000-2400 Ma). It is likely that these areas were sourced by local rivers and tributaries draining the Transcontinental Arch and delivered sediment to the deposition location of the Mt. Wilson Quartzite. While longshore transport was a viable distribution method for sediment along the passive margin, it is unlikely that the Peace River Arch (located northwest of the Mt. Wilson Quartzite) was its sole point source; rather it is more likely that there were multiple sediment sources for these western Laurentian quartz arenites. Temporal changes in provenance indicate different areas of basement rock were exposed throughout the deposition of the Mt. Wilson Quartzite, most likely reflecting long-term flooding of North America. The potential for spatial changes in provenance remains unsolved.

Na região leste do RS, porção sul da Bacia do Paraná, ocorre uma unidade do Jurássico Superior denominada de Arenito Pedreira. Para definir as relações estratigráficas e caracterizar esta unidade foram avaliados dois furos de sondagem para pesquisa de carvão, situados na região de Osório. Foram coletadas amostras representativas para análise petrográfica e contagem modal dos minerais constituintes para definição da proveniência dos sedimentos. Esta unidade está depositada entre à Formação Botucatu por desconformidade sobreposta e a Formação Rio do Rastro, com a qual tem contato erosivo. O Arenito Pedreira é composto por uma sucessão de ciclos granodecrescentes constituídos por arcóseos líticos e conglomerados arcoseanos clasto-suportados e polimíticos com grânulos e seixos subangulosos de varias litologias, que sucedem para pacotes de arenitos médios a grossos com estratificação cruzada tangencial e de baixo ângulo, finalizando em arcóseos com marcas de ondas e pelitos laminados no topo. Os litoclastos analisados representam rochas metamórficas de alto e baixo grau, granitoides, rochas sedimentares e vulcânicas básicas. As feições diagenéticas observadas caracterizam condições de eodiagenese e mesodiagenese, indicando ukm ambiente de clima continental seco. Os litoclastos descritos representam fontes associadas a um arco magmático dissecado e mostram características petrográficas semelhantes aquelas encontradas em rochas do Terreno Tijucas e do Batólito Pelotas, do Cinturão Dom Feliciano no RS. Estes dados sugerem uma área fonte próxima a área de deposição. A porção norte da estrutura soerguida do Arco de Rio Grande de direção NW-SE, representa a área fonte dos sedimentos que constituíram o Arenito Pedreira. / In the eastern part of the State of Rio Grande do Sul, in the southern portion of the Paraná Basin, there is a Upper Jurassic unit informally called Pedreira Arenite. In define the stratigraphic relations and to characterize this unit, a description of the two drilling holes associated to coal research work situated in the Osório region. It was collected representative samples to petrographic analysis and the modal count of the constituent minerals was carried out to define the provenance and origin of the sediments. This unit is deposited under Botucatu Formation by to unconformity and over Rio do Rastro Formation, with which it has erosive contact. The Pedreira Arenite is composed of a succession of granodecrescent cycles consisting of lithic arkoses and conglomerate sandstones, clast-supported and polymitic with subangular granules and pebbles of various lithologies, which succeed for medium to thick sandstone packages with tangential and low angle cross-stratification. This package ending in marks of waves arkoses and laminated mudstones at the top. The analyzed lithoclasts are represented by high and low metamorphic rocks, granitoids, sedimentary and volcanic rocks. The diagenetic features found characterize conditions of eodiagenesis and mesodiagenesis, where the environment present features of continental dry climate environment. The provenance studies highlight sources associated with dissected magmatic arc and shows petrographic features similiar to the rocks founded in Tijucas Terrane and Pelotas Batholith, of the Dom Feliciano Belt in the RS State. This data refers to a source area very close to the deposition area. The north portion of the positive structure of NW-SE direction called Rio Grande Arch,represent the source area of the sediments that generated the Pedreira Arenite.

Middle Ordovician (Whiterockian) sandstone units within the Oil Creek, McLish, and Tulip Creek formations of the Simpson Group of Oklahoma, and the Everton (Calico Rock Member) and St. Peter formations of Arkansas were deposited on the southern margin of Laurentia. They represent the first major siliciclastic input to the southern U.S. Midcontinent above the post-Sauk unconformity. Samples were collected from outcrops of the major sandstone units to determine their U-Pb detrital zircon age distributions for provenance. Samples were prepared and analyzed using laser ablation - inductively coupled plasma - mass spectrometry (LA-ICP-MS). Probability-density plots were created to determine likely source areas for sediment, based on comparing detrital zircon ages to known ages of basement terranes. Detrital zircon grains from the Early Whiterockian Calico Rock sandstone indicate a majority of its zircon population was ultimately derived from the 900-1300 Ma Grenville orogenic province, with secondary input ultimately derived from the 1300-1550 Ma Granite-Rhyolite/Anorogenic Province and the Archean Superior province along the Transcontinental Arch. It is likely, at this time, that zircons were also sourced from reworked sediments from more proximal secondary sources. With sea level rise and transgression, the depositional shoreline and the sediment source areas moved to the north and west. The basal Oil Creek Sandstone of the Simpson Group was deposited unconformably above the Arbuckle Group in southern Oklahoma, and its zircon population is dominated by grains from Archean source terranes along the Transcontinental Arch. The basal sandstone unit of the McLish Formation indicates renewed sediment input containing zircons from 1300-1550 Ma Granite-Rhyolite/Anorogenic and 1600-1700 Ma Yavapai-Mazatzal terranes along the Transcontinental Arch. The Nemaha Ridge in northeastern Kansas likely acted as a source of first-cycle sediment in the southern midcontinent during this time. Small populations of detrital zircon grains between 1800 Ma and 2000 Ma occur in the majority of the samples. Their probability density peaks are generally centered at roughly 1850 Ma, suggesting an ultimate source in the Penokean orogenic province along the Transcontinental Arch.

Na região leste do RS, porção sul da Bacia do Paraná, ocorre uma unidade do Jurássico Superior denominada de Arenito Pedreira. Para definir as relações estratigráficas e caracterizar esta unidade foram avaliados dois furos de sondagem para pesquisa de carvão, situados na região de Osório. Foram coletadas amostras representativas para análise petrográfica e contagem modal dos minerais constituintes para definição da proveniência dos sedimentos. Esta unidade está depositada entre à Formação Botucatu por desconformidade sobreposta e a Formação Rio do Rastro, com a qual tem contato erosivo. O Arenito Pedreira é composto por uma sucessão de ciclos granodecrescentes constituídos por arcóseos líticos e conglomerados arcoseanos clasto-suportados e polimíticos com grânulos e seixos subangulosos de varias litologias, que sucedem para pacotes de arenitos médios a grossos com estratificação cruzada tangencial e de baixo ângulo, finalizando em arcóseos com marcas de ondas e pelitos laminados no topo. Os litoclastos analisados representam rochas metamórficas de alto e baixo grau, granitoides, rochas sedimentares e vulcânicas básicas. As feições diagenéticas observadas caracterizam condições de eodiagenese e mesodiagenese, indicando ukm ambiente de clima continental seco. Os litoclastos descritos representam fontes associadas a um arco magmático dissecado e mostram características petrográficas semelhantes aquelas encontradas em rochas do Terreno Tijucas e do Batólito Pelotas, do Cinturão Dom Feliciano no RS. Estes dados sugerem uma área fonte próxima a área de deposição. A porção norte da estrutura soerguida do Arco de Rio Grande de direção NW-SE, representa a área fonte dos sedimentos que constituíram o Arenito Pedreira. / In the eastern part of the State of Rio Grande do Sul, in the southern portion of the Paraná Basin, there is a Upper Jurassic unit informally called Pedreira Arenite. In define the stratigraphic relations and to characterize this unit, a description of the two drilling holes associated to coal research work situated in the Osório region. It was collected representative samples to petrographic analysis and the modal count of the constituent minerals was carried out to define the provenance and origin of the sediments. This unit is deposited under Botucatu Formation by to unconformity and over Rio do Rastro Formation, with which it has erosive contact. The Pedreira Arenite is composed of a succession of granodecrescent cycles consisting of lithic arkoses and conglomerate sandstones, clast-supported and polymitic with subangular granules and pebbles of various lithologies, which succeed for medium to thick sandstone packages with tangential and low angle cross-stratification. This package ending in marks of waves arkoses and laminated mudstones at the top. The analyzed lithoclasts are represented by high and low metamorphic rocks, granitoids, sedimentary and volcanic rocks. The diagenetic features found characterize conditions of eodiagenesis and mesodiagenesis, where the environment present features of continental dry climate environment. The provenance studies highlight sources associated with dissected magmatic arc and shows petrographic features similiar to the rocks founded in Tijucas Terrane and Pelotas Batholith, of the Dom Feliciano Belt in the RS State. This data refers to a source area very close to the deposition area. The north portion of the positive structure of NW-SE direction called Rio Grande Arch,represent the source area of the sediments that generated the Pedreira Arenite.

Na região leste do RS, porção sul da Bacia do Paraná, ocorre uma unidade do Jurássico Superior denominada de Arenito Pedreira. Para definir as relações estratigráficas e caracterizar esta unidade foram avaliados dois furos de sondagem para pesquisa de carvão, situados na região de Osório. Foram coletadas amostras representativas para análise petrográfica e contagem modal dos minerais constituintes para definição da proveniência dos sedimentos. Esta unidade está depositada entre à Formação Botucatu por desconformidade sobreposta e a Formação Rio do Rastro, com a qual tem contato erosivo. O Arenito Pedreira é composto por uma sucessão de ciclos granodecrescentes constituídos por arcóseos líticos e conglomerados arcoseanos clasto-suportados e polimíticos com grânulos e seixos subangulosos de varias litologias, que sucedem para pacotes de arenitos médios a grossos com estratificação cruzada tangencial e de baixo ângulo, finalizando em arcóseos com marcas de ondas e pelitos laminados no topo. Os litoclastos analisados representam rochas metamórficas de alto e baixo grau, granitoides, rochas sedimentares e vulcânicas básicas. As feições diagenéticas observadas caracterizam condições de eodiagenese e mesodiagenese, indicando ukm ambiente de clima continental seco. Os litoclastos descritos representam fontes associadas a um arco magmático dissecado e mostram características petrográficas semelhantes aquelas encontradas em rochas do Terreno Tijucas e do Batólito Pelotas, do Cinturão Dom Feliciano no RS. Estes dados sugerem uma área fonte próxima a área de deposição. A porção norte da estrutura soerguida do Arco de Rio Grande de direção NW-SE, representa a área fonte dos sedimentos que constituíram o Arenito Pedreira. / In the eastern part of the State of Rio Grande do Sul, in the southern portion of the Paraná Basin, there is a Upper Jurassic unit informally called Pedreira Arenite. In define the stratigraphic relations and to characterize this unit, a description of the two drilling holes associated to coal research work situated in the Osório region. It was collected representative samples to petrographic analysis and the modal count of the constituent minerals was carried out to define the provenance and origin of the sediments. This unit is deposited under Botucatu Formation by to unconformity and over Rio do Rastro Formation, with which it has erosive contact. The Pedreira Arenite is composed of a succession of granodecrescent cycles consisting of lithic arkoses and conglomerate sandstones, clast-supported and polymitic with subangular granules and pebbles of various lithologies, which succeed for medium to thick sandstone packages with tangential and low angle cross-stratification. This package ending in marks of waves arkoses and laminated mudstones at the top. The analyzed lithoclasts are represented by high and low metamorphic rocks, granitoids, sedimentary and volcanic rocks. The diagenetic features found characterize conditions of eodiagenesis and mesodiagenesis, where the environment present features of continental dry climate environment. The provenance studies highlight sources associated with dissected magmatic arc and shows petrographic features similiar to the rocks founded in Tijucas Terrane and Pelotas Batholith, of the Dom Feliciano Belt in the RS State. This data refers to a source area very close to the deposition area. The north portion of the positive structure of NW-SE direction called Rio Grande Arch,represent the source area of the sediments that generated the Pedreira Arenite.

Made available in DSpace on 2014-12-17T15:41:44Z (GMT). No. of bitstreams: 1 HeraldoSA_capa_ate_cap4_conclusao_e_referencias.pdf: 658887 bytes, checksum: 11fc03947cae68eafc72706a5e9ce665 (MD5) Previous issue date: 2008-02-10 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Due to the need of increasing production in reservoirs that are going through production decline, methods of advanced recovery have frequently been used in the last years, as the use of conventional methods has not been successful in solving the problem of oil drifting. In this work, the efficiency of different microemulsionated systems in the flow of oil from cores from Assu and Botucatu formations. Regarding drifting tests, cores were calcinated at a temperature of 1000?C, for 18 hours, with the aim of eliminating any organic compound present in it, increasing the resultant permeability. Following, the cores were isolated with resin, resulting in test specimens with the following dimensions: 3.8 cm of diameter and 8.7 cm of length. Cores were saturated with brine, composed of aqueous 2 wt % KCl, and oil from Guamar? treatment station (Petrobras/RN). A pressure of 20 psi was used in all tests. After core saturation, brine was injected again, followed by oil at constant flow rate. The system S3 - surfactant (anionic surfactant of short chain), isoamillic alcohol, pine oil, and water - presented the best drift efficiency, 81.18%, while the system S1E commercial surfactant, ethyl alcohol, pine oil, and distilled water presented low drift efficiency, 44,68% / Diante da necessidade de aumentar a produ??o de reservat?rios que se encontram em decl?neo de produ??o, os m?todos de recupera??o avan?ada v?m sendo bastante utilizados nos ?ltimos anos, visto que apenas os m?todos convencionais n?o t?m solucionado o problema de deslocamento de ?leo. Neste trabalho estudou-se a efici?ncia de diferentes sistemas microemulsionados no deslocamento de ?leo de testemunhos da forma??o Assu e da forma??o Botucatu. Para os ensaios de deslocamento, os testemunhos foram calcinados a uma temperatura de 1000?C, durante 18 horas, com a finalidade de eliminar qualquer mat?ria org?nica presente e aumentar a permeabilidade. Em seguida, os mesmos foram isolados com resina, apresentando as seguintes dimens?es: 3,8 cm de di?metro e 8,7 cm de comprimento. Para a satura??o dos testemunhos foi utilizado salmoura, composta de KCl a 2% em peso, e ?leo oriundo da Esta??o de Tratamento de Guamar? (Petrobras/RN) e em todos os ensaios utilizou-se press?o de 20 psi. Os ensaios de inje??o seguiram as seguintes etapas: para determinar a permeabilidade inicial, foi injetada salmoura, atrav?s do testemunho, em seguida, com o testemunho saturado com salmoura, foi injetado ?leo, ? vaz?o constante. Ap?s a satura??o do testemunho, foi injetada salmoura novamente a fim de obter o percentual de recupera??o pelo m?todo convencional. Para determinar a recupera??o de ?leo pelo m?todo especial foi injetada microemuls?o no testemunho, ? vaz?o constante. Dentre os resultados obtidos o sistema S3, composto de TC (tensoativo ani?nico de cadeia curta), ?lcool iso-am?lico, ?leo de pinho e ?gua destilada apresentou a melhor efici?ncia de deslocamento, 81,18%. Enquanto que o sistema S1E, composto por TA (tensoativo ani?nico comercial), ?lcool et?lico, ?leo de pinho e ?gua destilada apresentou uma baixa efici?ncia de deslocamento, apenas 44,68%

No description available.

I denna uppsats analyseras utbredningen av fornlämningar i Mälardalen och deras förhållande till miljö och geologi, med fokus på att hitta okända fornlämningar med hjälp av digitala verktyg. Kulturmiljöregistret baserat på inventeringar genomförda över tid studeras. Verktygen GIS och MaxEnt beskrivs, samt deras användning för arkeologiska landskapsstudier. De används för analys av fornlämningarnas spridningsbild. Ett antal lämningskategorier valdes ut för analys, och resultaten jämförs med tidigare forskning. Arkeologi och statistik kombinerat med naturvetenskapliga metoder används för att skapa modeller av okända lämningar som kan användas för att försöka återfinna dessa genom historiska kartor, LiDAR eller med geofysik. Spridningsmönster av figurristningar från bronsåldern påvisas ha en stark korrelation till bergarten kvartsarenit, en upptäckt som kan leda till nya tolkningar av lämningskategorin och landskapsutnyttjandet i Uppland. Uppsatsen visar på modeller och tekniker för landskapsanalys som kan vara användbara för att identifiera tidigare okända mönster och bättre förstå förhistoriska landskap samt för att skapa en brygga till framtida arkeologisk forskning med stöd av AI, drönare och stora datamängder. / In this paper, the distribution of ancient remains in the Mälardalen and their relationship to the environment and geology is analysed, focusing on finding unknown ancient remains using digital tools. Kulturmiljöregistret created from inventories carried out over time is studied. The tools GIS and MaxEnt are described, as well as their use for archaeological landscape studies and for analysis of distribution patterns of ancient remains. A number of categories of remains were selected for analysis, and the results were compared with previous research. Archaeology and statistics combined with natural science are used to create models of unknown remains for recovering them with the aid of historical maps, LiDAR or geophysics. Distribution patterns of figure carvings from the Bronze Age are shown to have a strong correlation to the rock type quartz arenite, a discovery that can lead to new interpretations of this category of remains and the landscape utilization in Uppland. The paper shows models for landscape analysis which can be useful for identifying previously unknown patterns and for better understanding of prehistoric landscapes, as well as to create a bridge to future archaeological research supported by AI, drones and large data sets.