Made available in DSpace on 2016-03-15T19:21:44Z (GMT). No. of bitstreams: 1 Ornella Maria Castelnuovo Angelucci.pdf: 14362631 bytes, checksum: 69c684bf23e2e32f8293402ed2ce1a19 (MD5) Previous issue date: 2012-02-28 / This study examines the atrium space as part of non-residential buildings for their potential to provide natural light in hot-humid climates. The proposed reading scheme investigates the possibilities of the architect's decisions in relation to its lobby, as well as the use of adjacent elements to forward them to the conditions of each project. A historical summary of the use of such compositional elements in the architecture shows its use for design purpose, climatic and environmental comfort, being performed a review of the design specification for buildings in tropical climates. To study the qualitative aspects of the merger of the atrium throughout the building, it will be taken cases where the central void is markedly expressed. / Este trabalho analisa o átrio como espaço integrante de edificações não residenciais quanto ao seu potencial em fornecer luz do dia. A leitura proposta e os esquemas aqui apresentados investigam as possibilidades de decisões do arquiteto em relação ao espaço do átrio frente às condições de cada projeto. Um resumo histórico da utilização de tais elementos compositivos na arquitetura evidencia seu uso por propósitos projetuais, climáticas e de qualidade ambiental. Para estudo dos aspectos qualitativos da incorporação do átrio no conjunto da edificação serão tomados casos cujo vazio central se expressa marcadamente.

O átrio esquerdo (AE) pode aumentar de tamanho e massa por sobrecarga de pressão e volume em várias doenças cardíacas, a exemplo da degeneração da valva mitral. O tamanho do AE é de especial interesse na avaliação da gravidade da doença, uma vez que o grau de aumento será um dos parâmetros para a instituição da terapia. A ecocardiografia é o método padrão para a avaliação não invasiva do paciente cardiopata e sempre inclui a mensuração do tamanho do AE. O modo-M convencional tem sido usado para tal avaliação, contudo, o mesmo tem suas limitações, devido à dificuldade em incluir a porção mais ampla do AE, resultando em um diâmetro e índice AE:AO subestimados. No modo bidimensional o AE pode ser mensurado em sua maior amplitude, resultando em uma medida mais acurada. Assim sendo, o objetivo deste estudo foi comparar os dois métodos, utilizando-se de 40 cães adultos sadios, com idade variando de 1,5 a 7 anos. No modo-M, o AE e a aorta (AO) foram medidos conforme normas da American Society of Echocardiography, no corte longitudinal para-esternal direito, e no modo bidimensional realizaram-se medidas lineares em pontos específicos e em momentos estabelecidos do ciclo cardíaco, no corte transverso para-esternal direito. Estabeleceu-se um índice para cada método, dividindo-se o diâmetro do AE com a AO. Observou-se que a diferença de diâmetro do AE no modo bidimensional (AEB) e do AE no modo-M foi estatisticamente significante (p < 0,001). O mesmo ocorreu com o índice AEB:AOB quando comparado ao índice AEM:AOM, sendo que a média do AEB:AOB = 1,379±0,130; I.C. 95%= 1,337-1,422 e a média do AEM:AOM = 1,067±0,064, I.C. 95%= 1,046-1,088. Observou-se correlação alta entre as medidas do AE, nos dois modos, com superfície de área corpórea e peso (coeficiente de correlação = 0,882-0,896). Ocorreu correlação alta também entre as medidas de AE dos sexos masculino e feminino, pelos dois métodos (p=0,003 e coeficiente de correlação = 0,725-0,732). Com relação aos índices, não houve correlação entre os mesmos e a superfície de área e o peso, podendo-se dizer que são, portanto, índices independentes de peso. O modo bidimensional oferece a possibilidade de aferição do AE em sua maior amplitude, superando assim o modo-M convencional. / The left atrium (LA) can become enlarged in size and mass attributable to both pressure and volume overload in various cardiac diseases, an example is the mitral valve degeneration. The size of LA is of special interest for clinical assessment of severity of the disease, once the degree of enlargement will be one of the parameters for therapy institution. The echocardiography is the standard method of noninvasive evaluation of the cardiac patient and often involves the LA size. The M-mode has been used to this evaluation, however it has inherent limitations, due to the difficulty in including the largest portion of the LA, underestimating the LA diameter and LA:AO index. In the two-dimensional (2D) mode, the LA can be measured at its largest portion and it is likely to be more accurate. The purpose of this study was to compare both methods, using 40 healthy adult dogs, and ages between 1,5 and 7 years old. In the M-mode, the LA and the aorta (AO) was measured according to the guidelines from the American Society of Echocardiography, using a right long-axis view and in the 2D-mode, linear measurements were made at specific time and points of the cardiac cycle, using a right short-axis view. LA:AO ratios were established for each method. The difference between the LA diameter in the 2D-mode (LAB) and in the M-mode (LAM) was significant (p < 0,001). The same has occured with the LAB:AOB index when it was compared with the LAM:AOM ratio. The LAB:AOB index was 1,379±0,130; C.I. 95%= 1,337-1,422 and the LAM:AOM index was 1,067±0,064, C.I. 95%= 1,046-1,088. It was observed high association between LA measurements, in both methods, with body weight and body surface area (correlation coefficient = 0,882-0,896) and also a high correlation between the LA in female and male, in both methods (p=0,003 e correlation coefficient = 0,725-0,732). There was no association between both indices with body weight and body surface area, which provides a body weight - independent measurement of LA size. The 2D - mode offers more accurate LA measurement , so it overcomes the M- mode.

This research designed and analyzed an innovative structural support system for ETFE (ethylene tetrafluoroethylene) atrium roofs between buildings. A cable-spring system was conceived, which is much lighter and more flexible than arches, frames, trusses, and beams which usually support ETFE roofs. Flexibility was a desirable property because the displacements may vary significantly among the buildings supporting the ETFE atrium roof during wind and seismic loading. The springs in the cable-spring system allow large differential displacements without exerting large support reactions on the buildings. The flexibility of the cable-spring system was compared to the cable-strut system which is used to support many other roofs. The concept of the cable-spring system was demonstrated by the design of an example problem and an experimental model. The example problem consisted of 20 m roof spans between buildings and differential displacements up to 8.5 cm. Conceptual design of the system consists of an array of intersecting cable-spring trusses that provide adequate drainage, venting, and repeatability. Detailed design includes the design of the ETFE cushion, truss depth, spring stiffness, cable sizes, and the telescoping tubes that enclose the springs. The ETFE cushions were analyzed with the MPanel software which is based on a computational process known as dynamic relaxation. The cable-spring trusses were analyzed using the principles of statics and large displacement geometry. Design curves and formulas were produced for spring sizes. A small scale experimental model was built to demonstrate the flexibility of the cable-spring support system. The weight of the atrium roof was estimated to be about 2.28 psf for the example problem. The analysis revealed that for the same spans and differential support movements the cable-spring support system had a 71% reduction in support reactions when compared to a cable-strut system.

The sun is a huge energy source with great potential of providing energy to the heating of homes and other buildings in an environmentally sustainable manner. In order to provide buildings with energy from the sun it is necessary to transfer the energy supply over time to when the demand arises. By storing the heat in a seasonal storage, solar energy from the summer can be used in the winter when the demand for heating is greatest. Today's existing plants are mainly in Europe and particularly in Germany. These facilities are designed to supply heat demands greater than 400 MWh and covers about 40-50 % of this need which consists of energy for space heating and domestic hot water. How much of the heat demand that is covered, the solar fraction, is partly due to losses from the storage which in turn is connected to the surface area of the storage. The bigger a storage, the smaller the losses because of the decreasing relationship between surface area and storage volume. Looking at the size of the seasonal storages that are currently in operation, the question if seasonal storage is also suitable for installations designed for heat demands smaller than 400 MWh arises. Jonas Haglund at the architect office Skanark AB in Karlstad is planning an accommodation of 40 flats and hopes that seasonal stored solar energy can serve as the main energy source for space heating and hot water. In order to make housing more attractive he is considering the idea of adding other features, like a pool and an atrium, that also require heating but with lower temperature requirements. Haglund would like to investigate whether the efficiency of the solar collector increases when the extra energy demands are added and if the energy cost, for those demands, in this way can be reduced. The purpose of this study is to investigate the possibility of covering a large fraction of a small-scale annual heat demand corresponding to about 40 newly built apartments. The study shall present the solar fractions that can be achieved with different storage concepts when storage size and collector area is varied. The study will also answer how the solar fraction will change if a heating demand with lower temperature requirements and varied character is added to the basic domestic heating and if the added energy demand to some extent can be free. These questions are answered by calculations and simulations with the simulation software COMSOL Multiphysics. The results show that it is possible to obtain solar fractions above 80% with sufficient collector area. Suitable storage volume varies depending on the specific storage concept. Simulations of seasonal storage in a tank show that a storage volume of 13 m3/MWh is an appropriate size, while the corresponding figure for duct storage in clay is 20 m3/MWh. An added heating demand of low temperature character increases the efficiency of the solar panels and creates, so called, free energy. / Examensarbete

Since taking hold in the mid 1960s, the modern atrium has become prevalent in many designs and buildings within contemporary architecture. The modern day atrium has endured to find its place amidst our current technologies and design aspirations by continuing to offer a capacity for assisting in urban strategies, providing strong economic returns on investment, conserving or recycling existing buildings, and for its potential to reduce energy consumption. Today, as concerns for energy and the environment rise to prominence within contemporary opinion, the reliance on more integrated conservational design strategies such as what the atrium offers in the matter of material and energy conservation is more relevant than ever. Yet simply including an atrium space within a building does not guarantee its effectiveness in realizing the potential for sustainable design. By selecting to survey a collection of recently completed academic buildings in Southern Ontario, the thesis aimed to examine what current reality exists in our use of the atrium with regards to its conservational characteristics. By examining the atrium’s ability to integrate sustainable design strategies in three areas: the adaptation into existing buildings and flexible program space; the use of effective daylighting; and the provisions to manage passive air handling; the thesis identified what conservational attributes are present and how often these functions are accomplished within the atrium designs of the selected study group of buildings. Overall it was found that the current trends of conservationism in atria of the studied academic buildings are constant, that is, they do not exhibit growth proportional to the increasing awareness of ‘green’ and sustainable thinking seen in today’s culture. Furthermore, the thesis closes with a concluding critique, providing a discussion surrounding the belief that though the atrium is a possible material and energy conservational tool, much of its success can be attributed to the meticulous planning and holistic approach involved in the execution of successfully resolved atria designs.

Since taking hold in the mid 1960s, the modern atrium has become prevalent in many designs and buildings within contemporary architecture. The modern day atrium has endured to find its place amidst our current technologies and design aspirations by continuing to offer a capacity for assisting in urban strategies, providing strong economic returns on investment, conserving or recycling existing buildings, and for its potential to reduce energy consumption. Today, as concerns for energy and the environment rise to prominence within contemporary opinion, the reliance on more integrated conservational design strategies such as what the atrium offers in the matter of material and energy conservation is more relevant than ever. Yet simply including an atrium space within a building does not guarantee its effectiveness in realizing the potential for sustainable design. By selecting to survey a collection of recently completed academic buildings in Southern Ontario, the thesis aimed to examine what current reality exists in our use of the atrium with regards to its conservational characteristics. By examining the atrium’s ability to integrate sustainable design strategies in three areas: the adaptation into existing buildings and flexible program space; the use of effective daylighting; and the provisions to manage passive air handling; the thesis identified what conservational attributes are present and how often these functions are accomplished within the atrium designs of the selected study group of buildings. Overall it was found that the current trends of conservationism in atria of the studied academic buildings are constant, that is, they do not exhibit growth proportional to the increasing awareness of ‘green’ and sustainable thinking seen in today’s culture. Furthermore, the thesis closes with a concluding critique, providing a discussion surrounding the belief that though the atrium is a possible material and energy conservational tool, much of its success can be attributed to the meticulous planning and holistic approach involved in the execution of successfully resolved atria designs.

Thesis (MSc. (Faculty of Health Sciences))--University of Pretoria, 2007. / Summary in English and Afrikaans. Includes bibliographical references.

O átrio esquerdo (AE) pode aumentar de tamanho e massa por sobrecarga de pressão e volume em várias doenças cardíacas, a exemplo da degeneração da valva mitral. O tamanho do AE é de especial interesse na avaliação da gravidade da doença, uma vez que o grau de aumento será um dos parâmetros para a instituição da terapia. A ecocardiografia é o método padrão para a avaliação não invasiva do paciente cardiopata e sempre inclui a mensuração do tamanho do AE. O modo-M convencional tem sido usado para tal avaliação, contudo, o mesmo tem suas limitações, devido à dificuldade em incluir a porção mais ampla do AE, resultando em um diâmetro e índice AE:AO subestimados. No modo bidimensional o AE pode ser mensurado em sua maior amplitude, resultando em uma medida mais acurada. Assim sendo, o objetivo deste estudo foi comparar os dois métodos, utilizando-se de 40 cães adultos sadios, com idade variando de 1,5 a 7 anos. No modo-M, o AE e a aorta (AO) foram medidos conforme normas da American Society of Echocardiography, no corte longitudinal para-esternal direito, e no modo bidimensional realizaram-se medidas lineares em pontos específicos e em momentos estabelecidos do ciclo cardíaco, no corte transverso para-esternal direito. Estabeleceu-se um índice para cada método, dividindo-se o diâmetro do AE com a AO. Observou-se que a diferença de diâmetro do AE no modo bidimensional (AEB) e do AE no modo-M foi estatisticamente significante (p < 0,001). O mesmo ocorreu com o índice AEB:AOB quando comparado ao índice AEM:AOM, sendo que a média do AEB:AOB = 1,379±0,130; I.C. 95%= 1,337-1,422 e a média do AEM:AOM = 1,067±0,064, I.C. 95%= 1,046-1,088. Observou-se correlação alta entre as medidas do AE, nos dois modos, com superfície de área corpórea e peso (coeficiente de correlação = 0,882-0,896). Ocorreu correlação alta também entre as medidas de AE dos sexos masculino e feminino, pelos dois métodos (p=0,003 e coeficiente de correlação = 0,725-0,732). Com relação aos índices, não houve correlação entre os mesmos e a superfície de área e o peso, podendo-se dizer que são, portanto, índices independentes de peso. O modo bidimensional oferece a possibilidade de aferição do AE em sua maior amplitude, superando assim o modo-M convencional. / The left atrium (LA) can become enlarged in size and mass attributable to both pressure and volume overload in various cardiac diseases, an example is the mitral valve degeneration. The size of LA is of special interest for clinical assessment of severity of the disease, once the degree of enlargement will be one of the parameters for therapy institution. The echocardiography is the standard method of noninvasive evaluation of the cardiac patient and often involves the LA size. The M-mode has been used to this evaluation, however it has inherent limitations, due to the difficulty in including the largest portion of the LA, underestimating the LA diameter and LA:AO index. In the two-dimensional (2D) mode, the LA can be measured at its largest portion and it is likely to be more accurate. The purpose of this study was to compare both methods, using 40 healthy adult dogs, and ages between 1,5 and 7 years old. In the M-mode, the LA and the aorta (AO) was measured according to the guidelines from the American Society of Echocardiography, using a right long-axis view and in the 2D-mode, linear measurements were made at specific time and points of the cardiac cycle, using a right short-axis view. LA:AO ratios were established for each method. The difference between the LA diameter in the 2D-mode (LAB) and in the M-mode (LAM) was significant (p < 0,001). The same has occured with the LAB:AOB index when it was compared with the LAM:AOM ratio. The LAB:AOB index was 1,379±0,130; C.I. 95%= 1,337-1,422 and the LAM:AOM index was 1,067±0,064, C.I. 95%= 1,046-1,088. It was observed high association between LA measurements, in both methods, with body weight and body surface area (correlation coefficient = 0,882-0,896) and also a high correlation between the LA in female and male, in both methods (p=0,003 e correlation coefficient = 0,725-0,732). There was no association between both indices with body weight and body surface area, which provides a body weight - independent measurement of LA size. The 2D - mode offers more accurate LA measurement , so it overcomes the M- mode.

No description available.

The subject of the diploma thesis is the project documentation of the dental center. The documentation is for the execution of the construction. The building has 2 floors above ground and one underground floor. The building is located in the inner city of Ostrava. The interior spaces provide 5 functional surgeries, laboratories for the production of dental supplies and office spaces located on the 2.NP floor. The building serves as a medical facility. The building is barrier-free thanks to the used elevator and meeting the internal parameters.