This diploma thesis deals with the measurement of mechanical properties and accelerated aging of monoaxially stretched polyethylene strips coming from three types of polymeric mesh, which serves to pack hay on baling machines. The strength of the strips is evaluated from two points of view. The first one is static tensile strength measured before and after accelerated aging at 23 °C and 40 °C, the second one determines the strength as the weight that causes the strip failure on a simple machine at 23, 40, 60 and 80 ° C. The results show that the smallest static strength has the least stabilized strip, which, on the other hand, revealed the highest strength in a dynamic loading. The change of supermolecular structure was evaluated by calorimetric measurements. The data shown only very little change of inner structure due to the average response of the whole crystalline phase comprising relatively wide distribution of crystallites. It is more than probable that supermolecular structure had been changed but the method is not sensitive to see the change of orientation of lamellae and macromolecular chains in them.

Although protected areas have been used as principal conservation tools, most of them are suffering from human-induced threats. Consequently, a good understanding of such human-driven threats on biodiversity and identifying early warning systems for habitat change in protected areas is necessary for effective conservation of natural resources. To examine the impact of human disturbance on avifaunal assemblages and to assess the potential application of birds as bioindicators of forest health monitoring in the Afromontane forest of the Bale Mountains of Ethiopia, I recorded birds and habitat variables in three protected and three unprotected forests using a point transect method in 2009 and 2012. The two land use types differ in disturbance levels (higher in the unprotected areas), vegetation structure and bird assemblages. Species richness of entire bird guild, open woodland and open land habitat guilds, granivore and insectivore feeding guilds, and shrub layer and ground layer foraging substrate guilds of birds were significantly higher in the unprotected areas than the protected areas. Abundances of guilds of birds mostly followed a similar trend with species richness. However, densities of overall and forest-specialist bird guilds were higher in the protected area and vice versa for the other guilds. In general, the protected area assemblages were dominated by forest-specialist species, while those of the unprotected areas were dominated by openland and shrubland species. The implication is that disturbance had caused encroachment of non-native species (openland, open woodland and shrub land species) while negatively affecting native species (forest species, particularly tree canopy foragers). These assemblage differences are linked to changes in vegetation structure caused by disturbance. Thus, further forest degradation in the protected area should be avoided in order to maintain native/forest-specialist species. Given the differences in bird assemblages between the two land use types, there is a high likelihood that bioindicator species (i.e. indicator species - those 'characteristic' of a particular habitat - and detector species - those occurring in the different habitats considered but with moderate indication value) can be identified, therefore providing a useful tool to monitor ecosystem health of the forests. Four and nine species were identified as appropriate indicator species (i.e. species with indicator values > 60% and fulfilling biological and niche history criteria used in selection) in the protected and unprotected areas, respectively. In addition, nine species were identified as detectors of habitat change in the protected areas. These bioindicators provide a useful tool for managers of Afromontane forest in the Bale Mountains, as well as similar habitats elsewhere, for long term monitoring of ecosystem health of the forests. / Dissertation (MSc)--University of Pretoria, 2013. / DST/NRF Centre of Excellence / Zoology and Entomology / MSc / Unrestricted

No description available.

Although rice straw and other grains have been used in building since pre-history, in the past two decades, there has been a move to utilize this rapidly renewable, locally available, agricultural byproduct as part of the sustainable construction movement. Up to this point, this has been done by simply stacking up the full straw bales. Stak Block, invented by Oryzatech, Inc., is a modular, interlocking block made of a composite of rice straw and binding agent that serves as an evolution in straw construction. This study investigates the feasibility of using these Stak Blocks as a structural system. The report was divided into four main parts: material testing, development of effective construction detailing, full-scale physical shear wall testing, and a comparison with wood framed shear walls. The first section investigated the feasibility of using the Stak Blocks in a load-bearing wall application. Constitutive properties of the composite straw material such as yield strength and elastic stiffness were determined and then compared to conventional straw bale. Next, the decision was made to prestress the walls to create a more effective structural system. Various construction detailing iterations were evaluated upon the full-scale shear wall testing using a pseudo-static cyclic loading protocol. Finally, the available ductility of the prestressed Stak Block walls in a lateral force resisting application is quantified along with an approximation of potential design shear forces. It was determined that the Stak Block material performed satisfactorily in gravity and lateral force resisting applications, in some respects better than conventional wood-framed construction, and has great potential as a seismically-resistant building material.

Grâce aux développements techniques et technologiques des dernières décennies, le commerce international du coton passe graduellement d’un classement manuel et visuel à un classement à base de résultats de mesures instrumentales. Or adopter une technique requiert d’en étudier ses modalités et ses conditions d’utilisation. Aux USA, des études périodiques de variabilité permettent d’assortir ces résultats d’analyse de tolérances commerciales afin de limiter la fréquence des litiges. Adopter en Afrique les règles et les méthodes de mesure des USA exposerait à un risque de litige accru si les conditions de production déterminent un coton de qualité plus variable. Pour la première fois en Afrique, nous avons mené une étude de la variabilité des caractéristiques technologiques des fibres dans huit pays d’Afrique de l’Ouest et du Centre : Bénin, Burkina-Faso, Cameroun, Côte d’Ivoire, Mali, Sénégal, Tchad et Togo. Pendant deux saisons de production, nous avons réalisé une expérimentation à trois types de prélèvements de fibres : 1) huit échantillons par balle au sein de 215 balles produites dans 27 usines d’égrenage, 2) un échantillon par balle de 4286 balles constituées en séries de 200 balles consécutives en saison 1 et de 100 balles consécutives en saison 2 dans les mêmes usines, 3) deux échantillons par balle (un en haut et un en bas) sur 817 balles constituées en séries de vingt balles consécutives hebdomadairement dans cinq usines au cours de la saison 2. Ensuite, les échantillons des 5318 balles échantillonnées furent analysés sur une Chaîne de Mesures Instrumentales (CMI) dans un laboratoire respectant les recommandations internationales et les conditions d’ambiance contrôlées. L’analyse statistique des données recueillies a permis d’évaluer le niveau de variabilité de chacune des caractéristiques technologiques étudiées, au sein des balles et entre celles-ci. Une méthode d’échantillonnage et de réalisation des analyses sur CMI est proposée pour réaliser le classement des balles de coton d’Afrique de l’Ouest et du Centre à partir de résultats précis et répétables respectant les règles commerciales établies au niveau mondial. / Thanks to the technical and technological developments of the last decades, the international cotton trade is moving from a manual and visual classification to one based on instrument results. Now, adopting a technique requires studying its modalities and its conditions of use. In the USA, periodical studies of the variability make it possible to provide trading tolerances together with instrumental test results in order to limit the litigation event frequency. Apply USA rules and measurement methods in Africa would lead to increased litigation risk if production conditions induce more variable cotton quality. For the first time in Africa, we have conducted a study of the variability of the technological characteristics of the fibers in eight countries of Western and Central Africa: Benin, Burkina-Faso, Cameroon, Chad, the Ivory-Coast, Mali, Senegal and Togo. During two seasons of production, we conducted an experiment with three types of fiber sampling: 1) eight samples per bale within 215 bales produced in 27 ginning mills, 2) one sample per bale from 4286 bales organized in lots of 200 consecutive bales during season 1 and of 100 consecutive bales in season 2 in the same ginning mills, 3) two samples per bale (one from the top, one from the bottom) from 817 bales organized in lots of twenty consecutive bales each week in five ginning mills during season 2. Then, samples from the 5318 sampled bales were analysed with Standardized Instruments for Testing Cotton (SITC) in a laboratory which respects international recommendations and required ambient air conditions. The statistical data analysis allowed us to evaluate the level of variability of each of the studied technological characteristics, within the bales and between the bales. A sampling and testing methodology using SITC is being proposed to achieve the classification of the different sorts of cotton produced in Western and Central Africa from precise and repeatable results abidden by the worldwide established trading rules.

Submitted by Paulo Thiago Bolzan Mansur (thiago@bignet.com.br) on 2014-02-17T15:58:20Z No. of bitstreams: 1 Paulo Thiago Bolzan Mansur.pdf: 2172572 bytes, checksum: 28222e26d92668489691796fb8c00a6e (MD5) / Approved for entry into archive by Suzinei Teles Garcia Garcia (suzinei.garcia@fgv.br) on 2014-02-17T19:45:56Z (GMT) No. of bitstreams: 1 Paulo Thiago Bolzan Mansur.pdf: 2172572 bytes, checksum: 28222e26d92668489691796fb8c00a6e (MD5) / Made available in DSpace on 2014-02-17T19:49:23Z (GMT). No. of bitstreams: 1 Paulo Thiago Bolzan Mansur.pdf: 2172572 bytes, checksum: 28222e26d92668489691796fb8c00a6e (MD5) Previous issue date: 2014-01-24 / O presente estudo buscou analisar a viabilidade econômica, agronômica e ambiental de um sistema que está em execução em uma propriedade no norte do estado de Goiás. Esse sistema, denominado Sistema Triângulo, vai de encontro com a Integração Lavoura-Pecuária e busca formas alternativas para o uso dos restos culturais (fardos) de soja fornecendo esse material como volumoso para o gado no sistema de confinamento. Para o estudo da viabilidade, foram usadas as informações da própria fazenda num estudo de caso. Para tal, realizou-se uma revisão quanto à adoção de sistema de produção na área agrícola, quanto às interações dos macronutrientes que seriam retirados das áreas por intermédio dos fardos, o papel da matéria orgânica quanto à sustentabilidade do sistema, o cenário atual dos confinamentos no Brasil e os custos que compõem e determinam a lucratividade dessa atividade. Por ser um estudo de caráter incremental, a viabilidade econômica ficou focada à redução dos custos alimentares. Foram utilizadas informações produzidas pela Fazenda Triângulo que é produtora de soja desde 2002. Sendo assim, foi possível acompanhar a evolução dos teores de macronutrientes (nitrogênio, fósforo, potássio, cálcio, magnésio e enxofre) e do carbono em uma área total de 351 ha. Os resultados mostraram uma estabilidade nos níveis dos macroelementos após o início da retirada dos restos culturais mas, apresentou-se inconclusivo no caso do carbono. Foi estimada também a exportação dos macronutrientes por intermédio da retirada dos fardos das áreas de soja. Levantada a composição química dos fardos, foram estabelecidos seis cenários de reposição via adubação específica e esses custos foram acrescidos de custos de processamento dos fardos e o custo dos outros componentes da dieta no confinamento. Calculado o valor presente líquido para cada um dos cenários e comparando com a alternativa tradicional de dieta de confinamento, onde se usa a silagem de milho como 100% do volumoso, mostrou-se uma redução de até 5,02% nos custos alimentares. Com as práticas agronômicas da produção de soja vigentes hoje, recomenda-se a adoção do Sistema Triângulo com a ressalva de uma necessidade de maiores estudos quando seu impacto nos teores de carbono orgânico no solo. / This study analyze the economic, agronomic and environmental viability of a process that is running on a property in the northern state of Goiás. This system, called Triangle System (Sistema Triângulo), support crop-livestock integration and seeks alternative ways to the use of crop residues (bales) of soybean providing this material as forage for cattle in the feedlot. For the feasibility study, the information was provided by the farm. With this information was made a review about agriculture systems, as the interaction of macronutrients that would be removed from the field through the bales, the role of organic matter and the sustainability of the system, the current scenario of feedlot in Brazil and the costs that determine the profitability of this activity. This case study have incremental features, the economic feasibility was focused on the reduction of feed costs. The Triangle Farm is a producer of soybeans since 2002. There with was possible to follow the evolution of the levels of macronutrients (nitrogen, phosphorus, potassium, calcium, magnesium and sulfur) and carbon in a total area of 351 ha. The results showed an stability of the levels of macronutrients after initiation of removal of crop residues but showed inconclusive results about the levels of carbon. Observed the trend of the elements, was estimated the export through the removal of bales of soybean from the areas. With the chemical composition of the bales were established six replacement scenarios via specific fertilization and theses costs were added to processing costs and other components of the diet in the feedlot. To determine the feasibility of adopting this system the net present value was calculated, always comparing with the traditional alternative diet that use exclusively corn silage on forage, proved a reduction on the feed costs within 5,02%. With agronomic practices in soybean production prevailing today, we recommend the adoption of the Triangle System with the alert that further studies about the impact on soil organic carbon is needed.

ATR, advanced tongue root, is a phonological feature among vowels. As vowels assimilate to share the same value of that feature, they display ATR harmony. This is a common phenomenon among many African languages. ATR harmony is examined in this paper as manifested across morpheme boundaries wihin nouns in a Surmic language of Ethiopia called Bale. The data presented was collected at a workshop on ATR harmony held by SIL International in Mizan Teferi, Ethiopia, 2009. The vowel system in Bale displays a nine vowel inventory with a feature dominance of [+ATR] vowels which spread their feature both leftward and rightward to recessive [–ATR] vowels. The [+ATR] dominance is also present as a floating feature without any phonological material. The vowel /a/ is analysed as a neutral vowel, co-occuring with both [+ATR] and [–ATR] vowels within roots.

Achieving a transition to sustainability and decrease the environmental impact of building is part of Sweden's sustainability goals. Authorities and policy makers have a big responsibility to promote and facilitate this transition, but how this is to be achieved is not as readily answered. Using the multi-level perspective on socio-technical transitions, this thesis investigates the conditions for sustainability transitions in Swedish building by learning from the case of earthen and straw home builders. Qualitative mixed methods research, including questionnaires and semi-structured interviews was carried out to explore drivers and barriers for innovative sustainable building in Sweden. Findings suggest that there are barriers for innovative sustainable building in Sweden that might slow down the sustainability transition process, not in terms of regulation but in practices and norms in the current socio-technical regime.

Today, buildings consume 40% of total energy demand in the EU and are responsible for 36% of GHG emissions. For this reason, and due to the delicate situation of climate change that planet Earth is experiencing, solutions are being sought to make the building sector more sustainable. In the current project, the use of natural materials has been chosen as a solution in line with the EU 2050 long-term strategy. This research broadens the knowledge on sustainable building with natural materials as an alternative to conventional construction. To this end, first, an extensive state of the art has been carried out to gather information and identify research gaps on natural building materials and energy efficiency, proving the suitability of natural construction materials. Special emphasis has been put on straw bale construction and rammed earth construction, which have been studied individually. In addition, geometrically identical building models of both building techniques have been developed and simulated in Stockholm and Valencia in order to see how they would perform in different climates. Total energy demand for the straw-bale building of 140.22 kWh/(m2·year) in the case of Stockholm and 37.05 kWh/(m2·year) in the case of Valencia has been obtained. For the rammed earth building, a total demand of 301.82 kWh/(m2·year) has been obtained in Stockholm and 78.66 kWh/(m2·year) in Valencia. Once passive measures are applied in the different models, a reduction in demand for the straw bale building of 77.8% and 36.3% has been achieved for Stockholm and Valencia, respectively. In the rammed earth building, in contrast, the demand has been reduced by 86.3% in Stockholm and 73.9% in Valencia. Heat recovery ventilation and high insulation level have been identified as imperative needs in Stockholm, in contrast to Valencia. Other improvement strategies such as windows substitution, air permeability improvement, or natural ventilation for cooling have been implemented. Apart from that, better performance of the straw-bale buildings has been identified for both climates. Additionally, focusing on thermal inertia, its influence has been identified as not completely significant in terms of annual demand in the simulated climates.

Even with all the knowledge and wisdom we can acquire, combined with the best of collective intentions, it will always be the case, that ultimately we have to balance what’s desirable with what’s possible. But what’s possible always proceeds us, like a carrot in front of our nose. Yet yesterday's dreams, could have been today’s reality... and perhaps todays dreams, can become real tomorrow. “Too often budget restrictions are used as the reason why good design is not possible, but the vernacular demonstrates over and over that fine, low-budget, small-scale design is possible if the designer [builder and inhabitant] cares.” [Wayne Attoe: The Architecture of Ricardo Legorreta] In this case, the project is a new rural family residence for a couple and their son, with an adjacent cottage for their aging parents. With a collective desire to design, build and live in the most ecologically responsible manner possible, the challenge is to integrate as many environmentally beneficial principles as logistics and budget constraints will allow. The result is a collaborative choreography of site, structure, materials selection, and sequence. The appropriate criteria by which a given structural system or material should be specified, is relative to the total system performance and longevity. Optimized performance is achieved through the correct interrelationship of elements, to maximize the greatest cumulative benefit. For example, the high embodied energy and pollution from the manufacture of extruded polystyrene [XPS] insulation is undesirable. However, because of its high R-value, moisture resistance, compressive strength, and dimensional stability, it is currently the best insulation available for below grade applications. Its use makes a living sod roof practical, which may have an enormous overall positive impact, but otherwise might not even be possible. "The most elegant design solutions... those that reduce complexity while solving multiple problems... won't be found by considering each item in isolation." [Alex Wilson and Nadav Malin: Environmental Building News, 10.95] In keeping with the principles and intentions cited earlier, the decision was made to build a [passive solar / straw bale and heavy timber / living roof] home. / Master of Architecture