The use of rare and expensive noble metals in the chemical industry as organometallic catalysts has grown exponentially in the past few decades due to their high activity, selectivity and their ability to catalyze a wide range of reactions. With this growth in use has also come a proportional growth in concern as these toxic metals inevitably leach into the environment and their negative effects on public health and our ecosystems are becoming better understood. First-row transition metal catalysts provide both environmental and economic benefits as alternatives to these noble metals due to their lower toxicity and cheaper costs. The two-electron chemistry that makes the noble metals so attractive however, is more challenging to accomplish with first-row transition metals. Intelligently designing the ligand scaffold which surrounds the metal can mitigate or even eliminate some of the shortfalls of these first-row metals. Some key features that should be considered when designing a ligand are: 1) a strong chelating ability so the ligand can stay attached to the metal, 2) incorporation of strong donors to favour low-spin complexes, 3) inclusion of hemilabile groups to allow for substrate activation and metal stabilization throughout various oxidation states, 4) redox activity to be able to donate or accept electrons, and 5) inclusion of Lewis base functionalities which are able to assist the substrate activation. Ligands which incorporate these features are known as bifunctional ligands as they can accomplish more than one function in the catalytic cycle. Developing first-row transition metal complexes containing these ligands may enable these species to replicate the reactivity and selectivity generally associated with the precious metals. Being able to replace the noble metals used in industry with these catalysts would have tremendous environmental and economic benefits. The objective of this thesis is to advance the field of bifunctional catalysis by examining the behaviour of two sterically svelte, tridentate SNS ligands containing hard nitrogen and soft sulphur donors when bonded to cobalt. Previous work with iron provides a template of the ligand behaviour to which cobalt can be compared, allowing us to contrast the effects exerted by the different metals. After an introduction to bifunctional catalysis in Chapter 1, Chapter 2 describes the reactivity of the amido ligand, SMeNHSMe, with precursors ranging from Co(I) to Co(III), all of which yielded the 19e- pseudooctahedral cobalt(II) bis-amido complex, Co(SMeN-SMe)2 characterized by 1H NMR spectroscopy, single-crystal X-ray crystallography and cyclic voltammetry. Although this complex has a similar structure as the Fe analogue, the cobalt bis-amido complex did not exhibit the same hemilabile behaviour that allowed for simple ligand substitution of one of the thioether groups. Instead it reacted reversibly with 2,2’-bipyridine while 1,2-bis(dimethylphosphino)ethane (DMPE) and 2,6-dimethylphenyl isocyanide both triggered additional redox chemistry accompanied by the loss of protonated SMeNHSMe. In contrast, protonation gave the cobalt(II) amido-amine cation, [Co(SMeNSMe)(SMeNHSMe)](NTf2), which allowed for substitution of the protonated ligand by acetonitrile, triphenylphosphine and 2,2’-bipyridine based on 1H NMR evidence. The ability of Co(SMeNSMe)2 to act as a precatalyst for ammonia-borane dehydrogenation was also probed, revealing that it was unstable under these conditions. Addition of one equivalent of DMPE per cobalt, however, resulted in better activity with a preference for linear aminoborane oligomers using ammonia-borane and, surprisingly, to a change in selectivity to prefer cyclic products when moving to methylamine-borane. Chapter 3 delves into the chemistry of the thiolate ligand, SMeNHS, which formed a new 18e- cobalt(III) pseudooctahedral complex, Co(S-NC-)(SMe)(DEPE), from oxidative addition of the Caryl-SMe bond. Scaling up this reaction resulted instead in formation of an imine-coupled [Co(N2S2)]- anion which was characterized by 1H NMR/EPR spectroscopy, single-crystal X-ray diffraction, cyclic voltammetry and DFT studies. The latter revealed an interesting electronic structure with two electrons delocalized in the ligand, demonstrating the non-innocent nature of the N2S2 ligand. While the analogous iron complex proved to be an effective pre-catalyst for the hydroboration of aldehydes with selectivity against ketones, this behaviour was not observed with [Co(N2S2)]- which gave a slower rate and less selectivity. The knowledge acquired from this thesis work has advanced the field of bifunctional catalysis by extending the application of these two SNS ligands from iron to cobalt, revealing unpredictable differences in reactivity between the metals. By comparing the behaviour of these ligands with iron and cobalt, we gain a better understanding of the chemistry that is accessible by these ligands and the applications for which they may be used. This increased knowledge contributes to our long-term goal of replacing expensive and toxic noble metals with more benign first-row transition metals, improving the sustainability of the chemical industry.

The synthesis of high value acrylic monomers is currently done industrially via cyanohydrin hydration using concentrated acids, resulting in large quantities of useless byproducts. This current process is energy intensive and lacks atom economy; therefore, alternative cyanohydrin hydration strategies are under investigation. Ideally, cyanohydrin hydration would be done using organometallic nitrile hydration catalysts. Cyanohydrin hydration with these catalysts is challenging, because it needs to be done at low temperatures and under acidic conditions to reduce cyanohydrin degradation and catalyst poisoning with cyanide. This dissertation describes the reactivity of [Ru(#951; / 10000-01-01

Zeolite catalysis plays an important role in many industrial applications due to their unique properties and has become widely used in the area of oil refining. Of particular interest is Zeolite Y, which can be hydrothermally treated into its ultrastable form, USY. USY offers a superior practicality, especially when dealuminated and metal-loaded. The importance of alkanes hydroisomerization arises from the continuingly stricter regulations imposed on the utilization of gasoline as an automotive fuel. The requirements to reduce the aromatics content in gasoline present a need to find an alternative way to maintain its research octane number (RON). An alternative to gasoline's high-octane aromatic content is to increase the RON for the paraffinic content of gasoline, which can be accomplished through hydroisomerization. Commercially, bifunctional metal-loaded zeolites are used to hydroisomerize the light naphtha stream produced at overheads of atmospheric distillation towers. However, no such process exists for the low-value heavy naphtha cut. This targeted process would, if successful, greatly improve refiner's profitability.In this work, bifunctional USY zeolite catalysts are studied in the hydroisomerization of a normal alkane (nC7, RON = 0). This nC7, found in heavy naphtha, has been used as the 'model' compound. The impact of different reaction conditions and catalyst properties on catalyst activity and stability, in addition to the catalyst selectivity to high octane isomers is one step towards determining optimum conditions and preferential catalyst formulations that favour octane maximization. Six platinum-loaded USY zeolite catalysts, four in-house and two commercial, were tested in an atmospheric glass fixed-bed reactor and a stainless steel reactor purpose-built during the course of this thesis. Reaction temperatures ranged from 170 to 250oC at pressures between 1 and 15 bar. The hydrogen to hydrocarbon molar ratio was fixed at 9, with feed space time ranging from 35.14 to 140.6 kg.s/mol. In-house catalysts were hydrothermally treated at different severities, while commercial ones were originally dealuminated through acid-leaching treatments.Results have shown commercial catalyst CBV-712 gave the best performance and highest octane values for product isomers (>30). In addition, there was no coke generation. The next best catalyst was the most severely steamed in-house catalyst (USY-D) that has shown a remarkable performance at high pressures, almost eclipsing the performance of CBV-712, yet produced higher levels of coke. Other USY catalysts tested were less robust during reactions, probably due to imbalance in their acidic to metallic functions, or diffusion limitations arising from their pore structures. The best catalysts were, nonetheless, highly sensitive to sulfur presence in the feed, which severely impacted their activity, especially their metallic functions, and thus require sulfur-free feeds in order to demonstrate their full capacities. Simple kinetic modelling of experimental data was performed using the initial rates method and estimation of kinetic parameters, whose values were in good agreement with previous literature.

The use of enamines continues to be an important tool in organic syntheses as both a catalyst and reactant. The addition of metal catalysts coupled with enamine catalysis has generated many reactions that normally would not occur separately. However, catalysts' incompatibility is an issue that we wish to solve allowing new chemistry to occur without hindrance. The use of enamines has continued to be a well-studied area of organic chemistry, but the field is ripe for different types of enamines to gain the spotlight. Enaminones are enamines with both nucleophilic and electrophilic properties. They allow reactions that are normally not possible with enamines to become obtainable. Chapter 1 is a brief introduction on enamines and the reason they gained so much attention. Then ends with enaminones and what makes them interesting reactants. Chapter 2 described a new synthesis for the tricyclic synthesis of chromanes using a novel bifunctional catalyst system of enamine-metal Lewis acid giving great yields (up to 87 %yield) and excellent stereoselectivity (up to 99 % ee). Chapter 3 covered new reactions for ring-open cyclopropane (up to 94% yield), tetrahydroquinolinones (up to 84% yield) and enantiospecific tetrahydroquinolinones (up to 84% yield and 97% ee) using α-enaminone and donor-acceptor cyclopropanes. Finally, Chapter 4 focused a new method for synthesizing benzobicyclo[3.2.1]octanes with an added sterically bulky quaternary center and imine functionalization giving yields between 36-73% yield using α-enaminone with alkylidene malonates.

Peptide secondary structure provides an exceptional scaffold on which to design highly reactive and selective enzyme-like catalysts. This work describes the rational design and synthesis of a suite of helical peptide catalysts that are capable of achieving proximity-induced rate enhancement in Diels-Alder cycloadditions and indole alkylations. Microwave assisted synthesis of resin-supported polypeptides enables incorporation of non-natural amino acid residues that induce helicity (Aib) or provide functional handles on which organic catalytic residues can be attached. These small peptide catalysts exhibit binding-driven selectivity rather than relying on the inherent reactivity of substrates, which allows access to products that are not obtainable with traditional catalysts in solution. Catalyst efficiency reached up to 28,000 turn overs, which mimics natural enzymatic systems. Studies were also conducted into the stabilization of peptide secondary structure via covalent linking of nucleophilic amino acid side chains with squaric acid residues. Under mild conditions, stapling of nitrogen, sulfur and oxygen residues can readily be achieved in either organic or aqueous media. Squaric acid staples display pH selectivity for specific side chains and selective removal of diester staples (diserine staple) is demonstrated with methylamine. This new method for peptide stapling is shown to dramatically increase the proteolytic stability of eIF4E cancer inhibitor proteins, which typically are prone to quick degradation. Tyrosidine and RGD peptide analogues were synthesized and cyclized on resin in order to provide a new pathway to macrocyclization of antibacterial and integrin binding cyclic peptides.

Late transition metal complexes of silver(I), rhodium(I), ruthenium(II), palladium(II) and platinum(II) containing a nitrile-functionalized N-heterocyclic carbene ligand (C-CN) were prepared. The nitrile group on the C–CN ligand was shown to undergo hydrolysis under basic conditions, leading to a silver(I) carbene complex with a primary-amido functional group, and a trimetallic complex of palladium(II) with a partially hydrolyzed C–N–N–C donor ligand. The reduction of a nitrile-functionalized imidazolium salt in the presence of nickel(II) chloride under mild conditions yielded an axially chiral square-planar nickel(II) complex containing a unique primary-amino functionalized N-heterocyclic carbene ligand (C-NH2). A transmetalation reaction moved this chelating C–NH2 ligand from nickel(II) to ruthenium(II), osmium(II), and iridium(III), yielding important catalysts for the hydrogenation of polar double bonds. The ruthenium(II) complex, [Ru(p-cymene)(C–NH2)Cl]PF6 catalyzed the transfer and H2-hydrogenation of ketones. The bifunctional hydride complex, [Ru(p-cymene)(C–NH2)H]PF6, which contains a Ru–H/N–H couple showed no activity under catalytic conditions unless when activated by a base. The outer-sphere mechanism involving bifunctional catalysis of ketone reduction is disfavored according to experimental and theoretical studies and an inner-sphere mechanism is proposed involving the decoordination of the amine donor from the C–NH2 ligand. The ruthenium(II) complex [RuCp*(C–NH2)py]PF6 showed higher activity than the iridium(III) complex [IrCp*(C–NH2)Cl]PF6 in the hydrogenation of ketones. This ruthenium(II) complex also catalyzes the hydrogenation of an aromatic ester, a ketimine, and the hydrogenolysis of styrene oxide. We proposed an alcohol-assisted outer sphere bifunctional mechanism for both systems based on experimental findings and theoretical calculations. The cationic iridium(III) hydride complex, [IrCp*(C–NH2)H]PF6 , was prepared and this failed to react with a ketone in the absence of base. The crucial role of the alkoxide base was demonstrated in the activation of this hydride complex in catalysis. Calculations support the proposal that the base deprotonates the amine group of this hydride complex and triggers the migration of the hydride to the η5-Cp* ring producing a neutral iridium(I) amido complex. This system contains an active Ir–H/N–H couple required for the outer sphere hydrogenation of ketones in the bifunctional mechanism.

Late transition metal complexes of silver(I), rhodium(I), ruthenium(II), palladium(II) and platinum(II) containing a nitrile-functionalized N-heterocyclic carbene ligand (C-CN) were prepared. The nitrile group on the C–CN ligand was shown to undergo hydrolysis under basic conditions, leading to a silver(I) carbene complex with a primary-amido functional group, and a trimetallic complex of palladium(II) with a partially hydrolyzed C–N–N–C donor ligand. The reduction of a nitrile-functionalized imidazolium salt in the presence of nickel(II) chloride under mild conditions yielded an axially chiral square-planar nickel(II) complex containing a unique primary-amino functionalized N-heterocyclic carbene ligand (C-NH2). A transmetalation reaction moved this chelating C–NH2 ligand from nickel(II) to ruthenium(II), osmium(II), and iridium(III), yielding important catalysts for the hydrogenation of polar double bonds. The ruthenium(II) complex, [Ru(p-cymene)(C–NH2)Cl]PF6 catalyzed the transfer and H2-hydrogenation of ketones. The bifunctional hydride complex, [Ru(p-cymene)(C–NH2)H]PF6, which contains a Ru–H/N–H couple showed no activity under catalytic conditions unless when activated by a base. The outer-sphere mechanism involving bifunctional catalysis of ketone reduction is disfavored according to experimental and theoretical studies and an inner-sphere mechanism is proposed involving the decoordination of the amine donor from the C–NH2 ligand. The ruthenium(II) complex [RuCp*(C–NH2)py]PF6 showed higher activity than the iridium(III) complex [IrCp*(C–NH2)Cl]PF6 in the hydrogenation of ketones. This ruthenium(II) complex also catalyzes the hydrogenation of an aromatic ester, a ketimine, and the hydrogenolysis of styrene oxide. We proposed an alcohol-assisted outer sphere bifunctional mechanism for both systems based on experimental findings and theoretical calculations. The cationic iridium(III) hydride complex, [IrCp*(C–NH2)H]PF6 , was prepared and this failed to react with a ketone in the absence of base. The crucial role of the alkoxide base was demonstrated in the activation of this hydride complex in catalysis. Calculations support the proposal that the base deprotonates the amine group of this hydride complex and triggers the migration of the hydride to the η5-Cp* ring producing a neutral iridium(I) amido complex. This system contains an active Ir–H/N–H couple required for the outer sphere hydrogenation of ketones in the bifunctional mechanism.

Au cours de ce travail de nouvelles méthodes pour la formation de liaison C-N ont été développées. Dans la première partie de cette thèse une application de catalyse métal-ligand bifonctionnelle pour la réaction énantiosélective aza-Michael est démontrée. Dans la deuxième partie nous présentons le travail sur les cyclisations, en utilisant des alcaloïdes du quinquina facilement disponibles, comme catalyseurs des plus prometteurs, fournissant des β-amino-acides d’indoline avec jusqu'à 98% ee. Parmi eux, l’hydroquinidine ressort du lot comme étant le catalyseur donnant le meilleur excès énatiomérique. La troisième partie est liée à l'élaboration d'un nouveau processus intermoléculaires de diamination de styrènes, diènes et triènes, utilisant des bis-sulfonylimides comme source d'azote, en combinaison avec le diacétate de iodosobenzène, qui fournit une approche intéressante et efficace de diamines vicinales biologiquement et chimiquement important. La réaction peut être effectuée à température ambiante sans avoir besoin de protection par atmosphère inerte. / The concept of metal-ligand bifunctionality was successfully applied for an enantioselective aza-Michael reaction by employing well-defined ruthenium amido complexes. The catalyst was optimised and the corresponding chiral indoline β-amino acid derivatives were obtained with high enantioselectivities. Next, a straightforward enantioselective bifunctional organocatalytic approach was also developed. Employing hydroquinidine as catalyst the corresponding cyclic products were obtained in excellent enantioselectivities and quantitative yields. These compounds can be selectively deprotected and applied to peptide synthesis. Finally, we have developed unprecedented diamination reactions of styrenes, butadienes and hexatrienes employing easily accessible hypervalent iodine(III) reagents under robust reaction conditions. The first examples of the metal-free 1,2-diamination of butadienes were demonstrated and this oxidation methodology was further extended to the highly attractive 1,4 installation of two nitrogen atoms within a single step.