Bisphenol A (BPA), a widely used chemical in plastic, has drawn wide attention due to its presence in many consumer products and the environment. The purpose of this study was to examine the association between urinary BPA and the reporting of cardiovascular diseases (CVD), and then to examine the effect of C-reactive protein (CRP) as a moderating variable. The data used in this research were extracted from the National Health and Nutrition Examination Survey collected in 2009-2010. Guided by the advanced epidemiological triangle, analysis involved 2 stepwise binary logistic regressions. The first step suggested that the controls were significant in predicting CVD (Ï?2 (5) = 83.72, p < .001, R2 = .15). The Nagelkerke R2 coefficient of determination indicated that the controls explained approximately 15% of the variance in instances of CVD. The second step of the binary logistic regression included the controls and BPA level in the model together. The regression analysis suggested that the Nagelkerke coefficient of determination (Ï?2 (6) = 83.76, p < .001, R2 = .15) did not increase from the 15% explained by the controls, and BPA level was found to be a nonsignificant predictor of CVD (p = .853). Due to lack of association between BPA and CVD, the analysis was shifted to examine the association between urinary BPA and serum CRP. The association between urinary BPA and serum CRP was also statistically nonsignificant (Spearman correlation coefficient, rs= .06, p = .015). The results may have positive social change by contributing to the body of knowledge on BPA and by increasing scientific scrutiny for substances used in people's daily lives.

Bisphenol A (BPA), a widely used chemical in plastic, has drawn wide attention due to its presence in many consumer products and the environment. The purpose of this study was to examine the association between urinary BPA and the reporting of cardiovascular diseases (CVD), and then to examine the effect of C-reactive protein (CRP) as a moderating variable. The data used in this research were extracted from the National Health and Nutrition Examination Survey collected in 2009-2010. Guided by the advanced epidemiological triangle, analysis involved 2 stepwise binary logistic regressions. The first step suggested that the controls were significant in predicting CVD (Ï?2 (5) = 83.72, p < .001, R2 = .15). The Nagelkerke R2 coefficient of determination indicated that the controls explained approximately 15% of the variance in instances of CVD. The second step of the binary logistic regression included the controls and BPA level in the model together. The regression analysis suggested that the Nagelkerke coefficient of determination (Ï?2 (6) = 83.76, p < .001, R2 = .15) did not increase from the 15% explained by the controls, and BPA level was found to be a nonsignificant predictor of CVD (p = .853). Due to lack of association between BPA and CVD, the analysis was shifted to examine the association between urinary BPA and serum CRP. The association between urinary BPA and serum CRP was also statistically nonsignificant (Spearman correlation coefficient, rs= .06, p = .015). The results may have positive social change by contributing to the body of knowledge on BPA and by increasing scientific scrutiny for substances used in people's daily lives.

In recent years, bio-based polymers derived from renewable resources have become increasingly important as sustainable and eco-efficient products which can replace the products based on petrochemical-derived stocks. The objective of our work was to develop novel bio-based reactive systems suitable for high performance composite materials especially epoxy systems. The most commonly used starting monomer to formulate epoxy networks is the diglycidyl ether of bisphenol A, DGEBA, derived from bisphenol A and epichlorohydrin. Bio-based epichlorohydrin is commercially available. So the challenge to obtain a fully bio-based epoxy prepolymer is to replace bisphenol A by a bio-based precursor. Another interest for replacing bisphenol A by a bio-based precursor is that bisphenol A has been known to have estrogenic properties. In this study, we studied different bio-based epoxy systems and compared them to a classical DGEBA based system using, in a first step, isophorone diamine (IPD) as conventional curing agent. Bio-based epoxy prepolymers were derived from natural sugars, sorbitol and isosorbide respectively. Sorbitol polyglycidyl ether is available commercially, while isosorbide diglycidyl ether was synthesized either via conventional epoxidation (i.e. using epichlorohydrin) or via the diallyl isosorbide intermediate. Another bio-based epoxy prepolymer was derived from cardanol and is also a commercial product. Chemical structure of the bio-based epoxy prepolymers were analyzed by different analytical methods, gelation and crosslinking reactions were studied using rheological measurements and differential scanning calorimetry, respectively. Properties of the cured networks were evaluated using dynamic mechanical analysis and thermo gravimetric analysis. Influence of the bio-based epoxy prepolymer structure on the system properties as well as the influence of the crosslinking agent structure (either derived from renewable resources or bio-based ones) was discussed. Water absorption of the bio-based networks was also studied.

The aquatic environment is severely impacted by xenobiotics that are released due to anthropogenic activities, threatening ecosystem health. Some of these contaminants accumulate in lipophilic fish tissues and are maternally transferred to developing offspring, affecting their growth and performance. However, knowledge about the long-term and generational impacts associated with maternal transfer of contaminants is limited in fish. In this thesis, the hypothesis tested was that maternal transfer of bisphenol A (BPA) leads to disruption in the developmental programing of growth and stress axes functioning in rainbow trout (Oncorhynchus mykiss), and that these changes are passed on to the next generation. This was tested by exposing oocytes to either control (vehicle; <0.01% ethanol) 0.3, 3.0, and 30.0 mg l-1 BPA in ovarian fluid for 3 h, prior to fertilization, to mimic maternal transfer. This led to the accumulation of 0, 0.8, 4.4 and 41.3 ng BPA embryo-1. Oocytes were fertilized with milt from clean males, and offspring growth, development and stress performances were assessed in a clean environment for a year (F1 generation). For F2 generation, oocytes collected from F1 females, raised from the different BPA accumulated eggs, were fertilized with milt from clean males and raised in a clean environment for one year as described for F1 generation. The accumulated BPA in eggs was quickly cleared and it was no longer detected in the F1 embryos at hatch. BPA exposure reduced specific growth rate and increased food conversion ratio in larvae reared from BPA-laden oocytes. Moreover, BPA-exposed fish had an altered cortisol developmental profile and a delay in stress axis maturation. In addition, the mRNA abundance of genes involved in somatotropic [insulin-like growth factor (IGF) -1; IGF-2; IGF receptor b (IGF-1rb)] and stress axes functioning [steroidogenic acute regulatory protein (StAR); cytochrome P450 side chain cleavage (P450scc)] were altered. Also, changes in thyroid signaling [thyroid receptor (TR) mRNA levels] and cortisol signaling [glucocorticoid receptor (GR) protein expression] were disrupted temporally during development. These results demonstrate that BPA accumulation in eggs, mimicking maternal transfer, impacts growth and development, and delays stress axis maturation via non-reproductive endocrine disrupting routes in trout. Some of the BPA changes seen in F1 generation also persisted in the F2 generation. For instance, ancestral exposure to BPA led to reduced growth and whole body glycogen content prior to feeding in the F2 fish. The developmental transcript profile of growth hormone-1and -2, IGF-1 and -2 and IGF-1rb, along with whole body cortisol levels were impacted by ancestral exposure to BPA. Moreover, a delay in cortisol dynamics post-stress was noted in the F2 fish of BPA exposure lineage. Our results show that ancestral exposure to BPA leads to effects on growth and stress performance in rainbow trout, but the mechanism is not known. To further investigate the long-term effect of BPA accumulation in eggs on stress performances, F1 and F2 juvenile fish were subjected to an acute stressor. Also, head kidney tissues from these juvenile fish were subjected to adrenocorticotrophic hormone (ACTH) stimulation in vitro to assess cortisol production capacity. BPA accumulation in eggs led to a reduced acute handling stressor-induced plasma cortisol response in trout from the F1 and F2 (only high BPA group) generations. Also, BPA exposure had a pronounced impact on acute handling stressor-mediated plasma glucose (only F2 generation) and lactate levels, indicative of a metabolic disturbance. BPA exposure (only the 4.4 ng group) did affect unstimulated but not stimulated [ACTH or 8-bromo-cyclic AMP (8-B-cAMP)] cortisol production from head kidney slices of juvenile fish from F1 generation. In the F2 generation, there was an increase in ACTH-stimulated cortisol production only from the high BPA-exposed group. Overall, BPA in eggs disrupts long-term cortisol and metabolic stress performances in rainbow trout. While the impaired plasma cortisol stress performance was dose-related in the F1, the effect was apparent only for high BPA group in the F2 generation, suggesting that the generational effects on cortisol stress axis functioning may be concentration-dependent. A metabolomics approach further confirmed multigenerational effects associated with BPA accumulation in eggs. Analysis of the metabolome profile at hatch and prior to first feed, using gas chromatography-time of flight-mass spectrometry (GC-TOF-MS), revealed a BPA-mediated metabolic disruption, including changes in pathways involved in carbohydrate, lipid and amino sugar metabolism, and amino acid metabolism and synthesis. Pathways involved in citric acid cycle and alanine, aspartate and glutamate metabolism were altered in both generations, suggesting that these pathways have the potential to be markers with predictive value for multigenerational effects of BPA in fish. Altogether, the study provides novel insights on the impact of BPA on rainbow trout metabolome at hatch and first feed. The results suggest that pathways involved in energy metabolism are targets for BPA impact and should be investigated as potential markers for BPA toxicity. Overall, BPA accumulation in oocytes induces long-term delays in growth and stress axis maturation in F1 generations fish, and these effects persist in the F2 generation. The developmental profiles of key genes of the somatotropic and HPI axes were altered by BPA, along with whole body composition, suggesting that BPA exposure leads to a metabolic disturbance in fish, resulting in reduced growth. Additionally, the altered plasma cortisol response to acute stress in F1 and F2 juveniles provides evidence for multigenerational effects of BPA on stress axis functioning. The current study proposes that BPA-induced epigenetic modifications during early development may be playing a key role in the generational effects on growth and stress axes disruption in trout. The finding that the growth and developmental changes to BPA exposure also corresponds with endocrine and metabolome changes in multiple generations in trout is novel, and underscores the necessity to develop new risk assessments tools for chemicals that are maternally transferred in fish.

The potential human health issues resulting from the continuous consumption of drinking water containing low concentration levels of persistent emerging pollutants has raised some concerns. The presence of emerging pollutants in surface water bodies and ground-water in Canada together with absence of proper drinking water treatment processes in remote places has created the need for an effective and simple process for removal of emerging pollutants from drinking water. Low seasonal temperatures in regions such as Saskatchewan demand a removal process that is effective at temperatures lower than room temperature. Adsorption with granular activated carbon is a well-established and effective method for removal of organic compounds from drinking water. There are a large number of reports on removal of organic compounds by activated carbon in literature however, the effectiveness of adsorption of emerging pollutants with granular activated carbon is not clear. Effectiveness of ozone treatment for oxidation of emerging pollutants is reported in literature however, effectiveness of regeneration of adsorbents saturated with emerging pollutants with ozone has not been investigated extensively. In the present work, effectiveness of adsorption with granular activated carbon for removal of emerging pollutants is investigated. Three model compounds of Ibuprofen, 2,4-dichlorophenoxyacetic acid, and Bisphenol A reported at considerable concentration levels in Saskatchewan water bodies were selected as model compounds. Bituminous coal based and coconut shell based granular activated carbons with basic point of zero charge were selected as adsorbents. Isotherm adsorption of model compounds on adsorbents was conducted at 280, 288, and 296 K. The Gibbs free energy, enthalpy, and entropy of adsorption were calculated using isotherm model parameters. Nitric acid pre-treatment was applied to reduce the point of zero charge of adsorbents. Adsorption isotherms were conducted with the acid treated adsorbents. Adsorption removal of model compounds in tap water was studied. Effectiveness of regeneration of saturated adsorbents with ozone was investigated. In terms of quality of fit to the isotherm adsorption data, Langmuir model was better than Freundlich model indicating monolayer adsorption of model compounds in all experiments. Higher Langmuir monolayer adsorption capacity (Qmax) of bituminous coal based adsorbent than coconut shell adsorbent for adsorption of model compounds was attributed to the higher porosity of bituminous coal based adsorbent. Adsorption of model compounds (i.e. IBP and BPA) present in molecular form in the pH condition of the experiments were more dependent on adsorbent surface functional groups e.g. carboxyl and carbonyl groups. The Qmax of adsorption of 2,4-D present in anionic form was proportional with the specific surface area of adsorbent. Adsorption at temperatures lower than room temperature was effective. Adsorbent with acidic point of zero charge was more effective in removal of model compounds than adsorbent with basic point of zero charge. Adsorption of BPA was higher in tap water in comparison to Millipore water due to the more neutral surface of adsorbent in tap water. Higher pH of tap water than Millipore water and the ionic interaction between the adsorbent and dissolved solids present in tap water caused the more neutral surface of adsorbent. Regeneration of adsorbents with ozone failed in restoration of adsorption capacity of adsorbents and excessive ozonation destroyed the pore structure of adsorbents.

>Magister Scientiae - MSc / Tuberculosis still remains one of the world’s killer diseases. Pyrazinamide (PZA) is one of the most commonly prescribed anti-tuberculosis (anti-TB) drugs due to its ability to significantly shorten the TB treatment period. However, excess PZA in the body caused hepatotoxicity and liver damage. This, together with the resistance of the bacteria to treatment drugs, poor medication and inappropriate dosing, contribute significantly to the high incidents of TB deaths and diseases (such as liver damage). This, therefore, calls for new methods for ensuring reliable dosing of the drug, which will differ from person to person due to inter-individual differences in drug metabolism. A novel biosensor system for monitoring the metabolism of PZA was prepared with a nanocomposite of multi-walled carbon nanotubes (MWCNTs), polyaniline (PANI) and cytochrome P450 2E1 (CYP2E1) electrochemically deposited on a glassy carbon electrode (GCE). The nanocomposite biosensor system exhibited enhanced electro-activity that is attributed to the catalytic effect of the incorporated MWCNTs. The biosensor had a sensitivity of 7.80 μA/ μg mL-1 PZA and a dynamic linear range (DLR) of 4.92 – 160 ng/mL PZA. Bisphenol A (BPA) is a hormone-disrupting chemical used in production of epoxy resins and polycarbonates, which produce various products used on a daily basis. However, BPA can leach out of plastic during normal use and cause health effects such as cancer or disrupt the endocrine system. Moreover, BPA has also been proven to degrade from the containers in landfills and accumulate in groundwater and streams, thereby, polluting the environment while destroying aquatic organisms. Therefore, this also calls for new selective and sensitive methods for the monitoring of BPA. A novel biosensor system for monitoring the oxidation of BPA was prepared from a nanocomposite of polyaniline, polymethyl methacrylate and titanium dioxide nanoparticles, also electrochemically deposited on the GCE. Biosensor fabrication was conducted by immobilization of the enzyme manganese peroxidase (MnP) iii onto the nanocomposite film. The nanobiosensor also revealed enhanced electro activity, attributed to the incorporation of TiO2 nanoparticles. The biosensor system had a sensitivity of 0.3 μA/nM and a detection limit of 0.12 nM. This detection limit falls within the range of the allowed daily intake of BPA as recommended by the Food and Drug Administration (FDA, USA) and other regulatory bodies.

abstract: Endocrine disruptors are chemicals that interact with the hormone system to negative effect. They ‘disrupt’ normal processes to cause diseases like vaginal cancer and obesity, reproductive issues like t-shaped uteri and infertility, and developmental abnormalities like spina bifida and cleft palate. These chemicals are ubiquitous in our daily lives, components in everything from toothpaste to microwave popcorn to plastic water bottles. My dissertation looks at the history, science, and regulation of these impactful substances in order to answer the question of how endocrine disruptors appeared, got interpreted by different groups, and what role science played in the process. My analysis reveals that endocrine disruptors followed a unique science policy trajectory in the US, rapidly going from their proposal in 1991 to their federal regulation in 1996, even amid intense and majority scientific disagreement over whether the substances existed at all. That trajectory resulted from the work of a small number of scientist-activists who constructed a concept and category as scientific, social, and regulatory. By playing actors from each sphere against each other and advancing a very specific scientific narrative that fit into a regulatory and social window of opportunity in the 1990s, those scientist-activists made endocrine disruptors a national issue that few could ignore. Those actions resulted in the Endocrine Disruptor Screening Program, a heavily-criticized and ineffective regulatory program. My dissertation tells a story of the past that informs the present. In 2018, the work of researchers, public media, and policymakers in the 1990s continues to play out, evident in the deep scientific division over endocrine disrupting effects and the inability of the European Union to settle on even a definition of endocrine disruptors for regulation purposes. / Dissertation/Thesis / Doctoral Dissertation Biology 2018

Steroid hormones in testis play an important role in spermatogenesis, maintenance of the male reproductive tract, production of semen and the maintenance of secondary sex characteristics and libido. They are also discussed as a target for substances called endocrine disruptors (EDs). No complex study was conducted on evaluation of relationships between EDs and steroid spectrum in 2 biological fluids; seminal plasma and plasma. The aim of the PhD. thesis was to develop and validate a method for determination of bisphenol A (BPA) and steroid spectrum in plasma and seminal plasma and to shed more light into mechanisms of ED action and effects of BPA and polychlorinated biphenyls (PCBs) on human spermatogenesis and steroidogenesis. Two new liquid-chromatography mass spectrometry methods for determination of BPA and 11 steroids in plasma and seminal plasma were developed and validated. The methods were used for estimation of analyte concentrations in 191 men with a different degree of fertility. Concurrently, the levels of six congeners of PCBs, gonadotropins, selenium and zinc in plasma were estimated. Partial correlations adjusted for age and BMI were calculated to evaluate relationships between these analytes. Seminal BPA, but not plasma BPA, was negatively associated with sperm concentration...

O objetivo deste trabalho foi avaliar a influência de diferentes aminas terciárias no grau de conversão, na contração de polimerização, na taxa de contração, na microdureza Knoop, na estabilidade de cor e na transmitância de luz de resinas experimentais, contendo, em peso, BisGMA e TEGDMA (3:1), 0,25% de canforquinona (CQ) e 1% de amina (DMAEMA, CEMA, DMPT, DEPT ou DABE). A influência de diferentes protocolos de fotoativação também foi investigada. O grau de conversão foi avaliado através de FTIR-ATR e a contração pelo método do disco aderido. A partir da diferenciação numérica dos dados de contração em relação ao tempo, obteve-se a taxa de contração de polimerização. A estabilidade de cor e a transmitância foram avaliadas em diferentes períodos de envelhecimento artificial. Os resultados foram avaliados pelos testes de ANOVA, Tukey e T3 de Dunnett (&#945; = 0,05). As propriedades estudadas variaram em função da amina. O grau de conversão e a contração de polimerização variaram na sequência: CQ < DEPT < DMPT &#8804; CEMA &#8776; DABE < DMAEMA. O grau de conversão e a contração também foram influenciados pelo protocolo de fotoativação, sendo observadas correlações positivas entre o grau de conversão e a contração e entre o grau de conversão e a taxa de contração. A cor variou na sequência: DMAEMA < DEPT < DMPT < CEMA < DABE. A transmitância variou na sequência: DEPT &#8776; DABE < DABE &#8776; DMPT &#8776; CEMA < DMPT &#8776; CEMA &#8776; DMAEMA, sendo mais evidente para o comprimento de onda de 400nm. Não foram observadas correlações entre o grau de conversão e as propriedades ópticas. A resina contendo DMAEMA apresentou maior grau de conversão, contração, taxa de contração e dureza, além de melhor estabilidade nas propriedades ópticas. / The aim of this work was to evaluate de influence of different tertiary amines on degree of conversion (DC), shrinkage-strain, shrinkage-strain-rate, Knoop microhardness, and colour and transmittance stabilities of experimental resins containing BisGMA / TEGDMA (3:1 wt), 0,25wt% camphorquinone, 1wt% amine (DMAEMA, CEMA, DMPT, or DABE). Different light-curing protocols were also evaluated. DC was evaluated with FTIR-ATR and shrinkage-strain with the bonded-disc method. Shrinkage-strain-rate data were obtained from numerical differentiation of shrinkage-strain data with respect to time. Colour stability and transmittance were evaluated during different periods of artificial aging, according to ISO 7491:2000. Results were evaluated with ANOVA, Tukey and Dunnetts T3 tests (&#945; = 0.05). The studied properties varied according to amines. DC and shrinkage-strain were maximum at the sequence: CQ < DEPT < DMPT &#8804; CEMA &#8776; DABE < DMAEMA. Both DC and shrinkage were also influenced by the curing protocol, with positive correlations between DC and shrinkage-strain and DC and shrinkage-strain-rate. Colour varied in the sequence: DMAEMA < DEPT < DMPT < CEMA < DABE. Transmittance varied in the sequence: DEPT &#8776; DABE < DABE &#8776; DMPT &#8776; CEMA < DMPT &#8776; CEMA &#8776; DMAEMA, being more evident at the wavelength of 400nm. No correlations between DC and optical properties were observed. The resin containing DMAEMA showed higher DC, shrinkage-strain, shrinkage-strain-rate and microhardness, in addition with better optical properties.

Observando o atual interesse em polímeros organometálicos para diversas aplicações, foi feita a síntese de uma série de polímeros conjugados contendo ferroceno na cadeia principal visando à investigação de suas propriedades, em especial fenômenos magnetorresistivos, magneto-ópticos e de óxido-redução. Os polímeros preparados pelo método de McMurry foram os seguintes: PFV: poli(1,1\'-ferrocenilenovinileno) e PFV-DOPPV-M: poli[1,1\'-ferrocenilenovinileno-alt-(2,5-di-n-octilóxi)-1,4-fenilenovinileno]. Outros dois polímeros foram preparados utilizando o método de polimerização de Wittig, o PFV-DOPPV-W: poli[1,1\'-ferrocenilenovinileno-alt-(2,5-di-n-octilóxi)-1,4-fenilenovinileno] e o PFV-DMPPV: poli[1,1\'-ferrocenileno-vinileno-alt-(2,5-dimetóxi)-1,4-fenilenovinileno]. A síntese de polímeros contendo segmentos &#960;-conjugados equenos e bem definidos separados por segmentos não-conjugados é uma das melhores stratégias para a obtenção de polímeros emissores de luz azul. Com base nesse argumento foi feita a síntese de uma série de polímeros contendo um derivado metoxilado de bisfenol-A (BPA) na cadeia principal, alternando-se com unidades de PPV ou PFV que apresentam segmentos conjugados bem definidos. Os polímeros preparados foram os seguintes: BPA-DOPPV:poli[2,2-bis(4-metoxifenil)-propano-alt-2,5-(di-n-octilóxi)-1,4-divinilbenzeno]; BPA-PPV: poli[2,2-bis(4-metoxifenil)-propano-alt-1,4-ivinilbenzeno]; BPA-DMPPV: poli[2,2-bis(4-metoxifenil)-propano-alt-2,5-dimetóxi-1,4-ivinilbenzeno]; BPA-DBPPV: poli[2,2-bis(4-metoxifenil)-propano-alt-2,5-dibromo-1,4-divinilbenzeno] e BPA-PFV: poli[2,2-bis(4-metoxifenil)-propano-alt-1,1\'-divinil-ferroceno]. Todos os polímeros obtidos foram caracterizados por métodos espectroscópicos (UV-VIS, IR, RMN), análises térmicas, SEC, entre outras. Algumas aplicações foram estudadas para esses polímeros, tais como a construção de um eletrodo de ORP modificado, a produção de diodos orgânicos emissores de luz (OLEDs) e a determinação da resposta \"olfativa\" de sensores de gases. / Owing to the current interest in organometallic polymers and their applications, a group of conducting polymers containing ferrocene in the main chain was synthesized aiming the study of their magnetoresistive, magneto-optic and redox properties. The following polymers were prepared via McMurry method: poly(1,1\'-ferrocenylenevinylene) (PFV) and poly[1,1\'-ferrocenylenevinylene-alt-(2,5-di-n-octiloxy)-1,4-phenylenevinylene] (PFV-DOPPV-M). Two other polymers were synthesized via Wittig method: poly[1,1\'-ferrocenylenevinylene-alt-(2,5-di-n-octiloxy)-1,4-phenylenevinylene] (PFV-DOPPV-W) and poly[1,1\'-ferrocenylene-vinylene-alt-(2,5-dimethoxy)-1,4-phenylenevinylene] (PFV-DMPPV). The synthesis of polymers with well-defined small &#960;-conjugated segments separated by non-conjugated segments is one of the best strategies to obtain blue light emitting polymers. Based on this statement the synthesis of several polymers formed by methoxylated bisphenol-A (BPA) alternated with PPV or PFV units was performed. The prepared polymers were the following: poly[2,2-bis(4-methoxyphenyl)-propane-alt-2,5-(di-n-octiloxy)-1,4-divinylbenzene] (BPA-DOPPV), poly [2,2-bis(4-methoxyphenyl)-propane-alt-1,4-divinylbenzene] (BPA-PPV), poly[2,2-bis(4-methoxyphenyl)-propane-alt-2,5-dimethoxy-1,4-divinylbenzene] (BPA-DMPPV), poly[2,2-bis(4-methoxyphenyl)-propane-alt-2,5-dibromo-1,4-divinylbenzene] (BPA-DBPPV) and poly[2,2-bis(4-methoxyphenyl)-propane-alt-1,1\'-divinylferrocene] (BPA-PFV). All the synthesized polymers were characterized by spectroscopic methods (UV/VIS, IR, NMR), thermal analysis, SEC, among others. Some applications to these polymers were studied: a modified ORP electrode, organic light emitting devices (OLEDs) and gas sensors.