Spelling suggestions: "subject:"blind ampling"" "subject:"blind campling""
1 |
High Speed Clock and Data Recovery TechniquesAbiri, Behrooz 01 December 2011 (has links)
This thesis presents two contributions in the area of high speed clock and data recovery systems. These contributions are focused on the fast phase recovery and adaptive equalization techniques.
The first contribution of this thesis is an adaptive engine for a 2x blind sampling receiver. The proposed adaptation engine is able to find the phase-dependent DFE coefficients of the receiver on the fly.
The second contribution is a burst-mode clock and data recovery architecture which uses an analog phase interpolator. The proposed burst-mode CDR is capable of locking to the first data transition it receives. The phase interpolator uses the inherent timing information in the data transition to rotate the phase of a reference clock and align it with the incoming data edge. The feasibility of the concept is demonstrated through fabrication and measurements.
|
2 |
High Speed Clock and Data Recovery TechniquesAbiri, Behrooz 01 December 2011 (has links)
This thesis presents two contributions in the area of high speed clock and data recovery systems. These contributions are focused on the fast phase recovery and adaptive equalization techniques.
The first contribution of this thesis is an adaptive engine for a 2x blind sampling receiver. The proposed adaptation engine is able to find the phase-dependent DFE coefficients of the receiver on the fly.
The second contribution is a burst-mode clock and data recovery architecture which uses an analog phase interpolator. The proposed burst-mode CDR is capable of locking to the first data transition it receives. The phase interpolator uses the inherent timing information in the data transition to rotate the phase of a reference clock and align it with the incoming data edge. The feasibility of the concept is demonstrated through fabrication and measurements.
|
3 |
A 5Gb/s Speculative DFE for 2x Blind ADC-based Receivers in 65-nm CMOSSarvari, Siamak 16 September 2011 (has links)
This thesis proposes a decision-feedback equalizer (DFE) scheme for blind ADC-based receivers to overcome the challenges introduced by blind sampling. It presents the design, simulation, and implementation of a 5Gb/s speculative DFE for a 2x blind ADC-based receiver. The complete receiver, including the ADC, the DFE, and a 2x blind clock and data recovery (CDR) circuit, is implemented in Fujitsu’s 65-nm CMOS process. Measurements of the fabricated test-chip confirm 5Gb/s data recovery with bit error rate (BER) less than 1e−12 in the presence of a test channel introducing 13.3dB of attenuation at the Nyquist frequency of 2.5GHz. The receiver tolerates 0.24UIpp of high-frequency sinusoidal jitter (SJ) in this case. Without the DFE, the BER exceeds 1e−8 even when no SJ is applied.
|
4 |
A 5Gb/s Speculative DFE for 2x Blind ADC-based Receivers in 65-nm CMOSSarvari, Siamak 16 September 2011 (has links)
This thesis proposes a decision-feedback equalizer (DFE) scheme for blind ADC-based receivers to overcome the challenges introduced by blind sampling. It presents the design, simulation, and implementation of a 5Gb/s speculative DFE for a 2x blind ADC-based receiver. The complete receiver, including the ADC, the DFE, and a 2x blind clock and data recovery (CDR) circuit, is implemented in Fujitsu’s 65-nm CMOS process. Measurements of the fabricated test-chip confirm 5Gb/s data recovery with bit error rate (BER) less than 1e−12 in the presence of a test channel introducing 13.3dB of attenuation at the Nyquist frequency of 2.5GHz. The receiver tolerates 0.24UIpp of high-frequency sinusoidal jitter (SJ) in this case. Without the DFE, the BER exceeds 1e−8 even when no SJ is applied.
|
Page generated in 0.0434 seconds