Multielectron bubbles (MEBs) are micron sized cavities in liquid helium that contain electrons confined within a nanometer thick layer on the inner surface of a bubble. These objects present a rich platform to study the behavior of a two dimensional electron gas (2DES) on a curved surface. Most crucially, the surface electron densities in MEBs can vary over a wide range, making it a suitable candidate for studying classical Wigner crystallization and quantum melting in a single system. So far, there has been only limited experimental study of MEBs, with most of the previous investigation transient in nature. As we discuss in our presentation, we have built a cryogenic system for performing transport and optical measurements of MEBs down to 1.3 K. We have developed a new technique of generating MEBs, and trapping them using two different methods. In the first method, we trapped MEBs using a Paul trap for more than hundreds of milliseconds. This allows the MEBs to be further manipulated with buoyant and electric forces, such as to obtain reliable measurements of their physical properties. As we observe experimentally, the surface charge density of a single MEB can vary by orders of magnitude during the course of one measurement, thereby covering a previously unexplored section of the 2DES phase diagram. In the second method, we trapped MEBs using a dielectric coated metal electrode over many seconds. This also allowed the properties of MEBs to be measured in a non-destructive manner. Since MEBs are charged bubbles, their motion can be controlled by electric fields, which allowed us to measure the drag of MEBs as a function of Reynolds number by analysing the trajectories. Due to the low viscosity and surface tension of helium compared to other liquids, these measurements could be performed at Morton Numbers that have never been explored. We also show that how the shape of a single MEB evolves from spherical to ellipsoidal as their speeds vary. During the course of experiments, we observed number of interesting phenomena, such as coalescence of similarly charged bubbles, as well as their splitting into secondary bubbles at high speeds. Most interestingly, we have imaged their dynamics in the presence of static, as well as oscillating electric fields, which may provide insight into the phase of the electronic system present inside the bubbles.

Manufacturing of light-weight materials is associated with several types of casting defects during solidification. Porosity defects are common, especially in aluminum and its alloys, which initiate crack propagation and thereby cause drastic deterioration in the mechanical properties. These defects, classified as micro and macro defects (based on their sizes), are mainly governed by release of hydrogen into the liquid at the solid-liquid interface, which triggers the nucleation and growth of hydrogen bubbles in the melt. Subsequently, these bubbles interact with solidifying interfaces such as dendritic arms and eutectic fronts, leading to the formation of pores. Macroscopic defects in the form of voids are created due to solidification shrinkage. The primary focus of the present work is to develop phenomenological models for the evolution of microporosity and microstructures during solidification. The issues outlined above typically occur in multi-phase environments comprising of solid, liquid and gaseous phases, and over a range of length and time scales. Any phenomenological prediction would, therefore, require a multi-phase-scale approach. Principles of volume averaging are applied to equations of conservation to obtain single-field formulations. These are then solved with appropriate interface tracking techniques such as Enthalpy, Level-set, Volume-of-fluid and Immersed-boundary methods. The framework is built up on a standard pressure based incompressible fluid flow solver (SIMPLER algorithm) and coupled modeling strategies are proposed to address the interfacial dynamics. A two-dimensional framework is considered with a fixed-grid Cartesian co-ordinate system. Scaling analyses are performed to bring out the relative effects of various competing parameters in order to obtain further insights into this complex phenomenon. The numerical results and scaling predictions are validated against experimental observations published in literature. In literature, numerical predictions of microporosity mainly include criteria based models based on empirical relations and deterministic/stochastic models based on diffusion driven growth assuming spherical bubbles. The dynamic evolution of non-spherical bubble-metal interface in a three-phase system is yet to be captured. Moreover, several in-situ experiments have shown elongated bubble shapes during the engulfment phase, therefore a criterion to define the dependence on cooling rates and the resulting bubble morphology can possibly deliver further practical insights. We propose a numerical model for hydrogen bubble growth, its movement and subsequent engulfment by a solidifying front, combining the features of level-set and enthalpy methods for tracking bubble-metal and solid-liquid interfaces, respectively. The influx of hydrogen into heterogeneously nucleated bubbles results in growth of bubbles to sizes up to a few hundreds of microns. In the first part of this numerical study, a methodology based on the level-set approach is developed to simultaneously capture hydrogen bubble growth and movement in liquid aluminum. The solidification is first assumed to occur outside the micro-domain providing a specified hydrogen influx to the bubble-in-liquid system. The level-set equation is formulated in such a way as to account for simultaneous growth and movement of the bubble. The growth of a bubble with continuous and fixed hydrogen levels in the melt is studied. The rates of growth of bubble-liquid and solidifying interfaces are compared using an order of magnitude analysis. This scaling analysis explains the thought experiment proposed in the literature, where difference in bubble shapes was attributed to the cooling rate. Moreover, it shows explicit dependence on bubble radius and cooling rate leading to a new criterion for bubble elongation proposed in this thesis. This also highlights the comparison between solidification and hydrogen diffusion time-scales which primarily govern the competitive growth behavior. The bubble-in-liquid model is coupled with microscopic enthalpy method to incorporate effects of solidification and study the interaction of solid-liquid and bubble-liquid interfaces. The phenomena of bubble engulfment and elongation are successfully captured by the proposed model. A parametric study is carried out to estimate the bubble elongation based on different initial bubble sizes and varying cooling rates encountered in typical sand, permanent mold and die casting processes. Although simulation of microstructures has been extensively studied in the literature, very few models address the phenomena of simultaneous growth and movement of equiaxed dendrites. The presence of different flow environments and multiple dendrites are known to alter the position and shape of the dendrites. The proposed model combines the features of the following methods, namely, the Enthalpy method for modeling growth; the Immersed Boundary Method (IBM) for handling the rigid solid-liquid interfaces; and the Volume of Fluid (VOF) method for tracking the advection of the dendrite. The algorithm also performs explicit-implicit coupling between the techniques used. Validation with available literature is performed and dendrite growth in presence of rotational and buoyancy driven flow fields is studied. The expected transformation into globular microstructure in presence of stirring induced flows is successfully simulated. A simple order estimate for time required for stirring is performed which agrees with numerical predictions. In buoyancy driven environment of a settling dendrite, the arm tip speeds show expected higher velocity of the upstream tip compared to its counterpart. The model is extended to study thermal and hydrodynamic interactions between multiple dendrites with appropriate considerations for different orientations and velocities of the dendritic solid entities. The present model can be used for the prediction of grain sizes and shapes and to simulate morphological transformations due to different melt flow scenarios. In the final part, the methodology presented for growth and engulfment of hydrogen bubbles is extended to study the phenomenon of diffusion driven bubble growth occurring in direct foaming of metals. The source of hydrogen is determined by the rate of decomposition of the blowing agent. This is accounted for by a source term in the hydrogen species conservation equation, and growth rate of hydrogen bubbles is calculated on the basis of diffusive flux at the interface. The level-set method is used for tracking the bubble-liquid interface growth, and the macroscopic enthalpy model is used for obtaining heat transfer and solid front position. The model is validated with analytical solution by comparing the front position and the solidification time. The variation of foam density with a transient hydrogen generation source is studied and qualitatively compared with results reported in literature. The modeling strategies proposed in this work are generic and therefore have potential in simulating a variety of complex multi-phase problems.

This thesis deals with the impacts of information and communication technology investment surge on USA economic growth in the 1990s. Besides others, rapid development of these technologies also led to the creation of a stock market bubble, which affected the expansion phase of the economic cycle. Its burst in 2000-2001 resulted in economic slow-down and end of the longest recorded economic expansion in the history of the United States. Main part of the thesis discusses the benefits of information technology for economy and further evaluates the role of the speculative bubble in the development of consumption and investment expenditures. The thesis results suggest that the increase in capital intensity and sharp stock market price inflation significantly accelerated the dynamics of the economic growth in the second half of the described cycle.

The main purpose of this thesis was to propose and test a new approach that captures the features of single and multiple bubbles dynamics using the Shan and Chen-type lattice Boltzmann method (LBM). Two dimensional bubbles motions were simulated considering the buoyancy effect for which the topology of the bubble is characterized by the Eötvös (Eo), and Morton (M) numbers. A qualitative and quantitative validation were performed using the Level set method. Bubble shape deformation was captured and analysis based on terminal Reynolds number and degree of circularity show very good agreement with the experimental results and with available simulation results. In sum, this study presents crucial preliminary information to further analyze multiphase fluid flows in various contexts.

Des bulles micrométriques sont utilisées dans divers domaines, notamment dans des applications médicales basées sur les ultrasons. Il est possible d’exploiter différents effets des bulles, comme par exemple leur résonance acoustique ou leur effet destructeur en cavitation inertielle. Un autre mécanisme exploitable est la génération de micro-écoulements, appelé microstreaming, induits autour d’une bulle. Ces écoulements sont relativement lents par rapport aux oscillations rapides de la bulle. Le microstreaming et les contraintes de cisaillement associées jouent un rôle important dans la perméabilisation d’une membrane cellulaire, mais il manque encore une compréhension détaillée de l’écoulement induit. Afin d’améliorer la compréhension des phénomènes physiques, ce travail se concentre sur les écoulements induits autour d’une bulle d’air dans piégée et excitée acoustiquement dans de l’eau et oscillante en modes de surface. La partie expérimentale se décompose de deux étapes. Dans un premier temps, il est nécessaire de contrôler la dynamique de la bulle, en particulier ses modes de surface et son orientation. Ceci est réalisé par coalescence entre deux bulles. Dans un second temps, le microstreaming est généré et enregistré simultanément à la dynamique de bulle. De cette manière il est possible de corréler les motifs d'écoulement aux oscillations de la bulle. Le grand nombre de motifs obtenus peut être classé selon le mode dominant et la taille de la bulle. Une étude plus détaillée de la dynamique de bulle permet de déduire les paramètres importants qui mènent à une telle variété de motifs de microstreaming. Afin de confirmer les résultats expérimentaux, un modèle analytique a été développé. Il est basé sur les équations de la mécanique des fluides de deuxième ordre et moyennées en temps, la dynamique d'interface de la bulle obtenue expérimentalement sert de donnée d’entrée au modèle. Ce manuscrit contient en supplément une section sur la génération de microjets par l'implosion d'agents de contraste. Ces jets peuvent apparaître en cas d’excitation acoustique suffisamment élevée. L’impact de ces jets sur parois présente un autre mécanisme responsable de la perméabilisation de membranes cellulaires. / Microbubbles find use in several domains, one of them being medical ultrasound applications. Different characteristics of those bubbles such as their acoustic resonance or their destructive effect during inertial cavitation can be exploited. Another phenomenon induced around acoustically excited bubbles is microstreaming, that means a relatively slow mean flow with respect to the fast bubble oscillations. Microstreaming and its associated shear stresses are commonly agreed to play a role in the permeabilization of cell membranes, a detailed understanding of the induced flows is however missing. To acquire basic physical knowledge, this work focuses on the characterization of streaming induced around an air bubble in water, more precisely around a single acoustically trapped and excited, nonspherically oscillating bubble. The experimental part consists of two steps. First, the bubble dynamics, in particular the triggered shape mode and the orientation of the bubble have to be controlled. For this, the use of bubble coalescence proves to be an adequate method. In a second step, the microstreaming is recorded in parallel to bubble dynamics. This allows to correlate the obtained streaming patterns to the respective shape oscillations. The large number of obtained pattern types can be classified, in particular with respect to the mode number and bubble size. A close investigation of the bubble dynamics allows furthermore deducing the important physical mechanisms which lead to such a variety of streaming patterns. In order to confirm the experimental findings, an analytical model has been developed. It is based upon time-averaged second-order fluid mechanics equations and the experimentally obtained bubble dynamics serves as input parameters. Supplementary to the microstreaming work, this manuscript contains a short section on directed jetting of contrast agent microbubbles, which might appear at high acoustic driving. The impact of those microjets on cell membranes presents another mechanism made responsible for the permeabilization of cell membranes.

The high specific energy consumption from all existing seawater desalination methods has heightened the motivation for having more efficient and greener desalination processes to meet the future goals of sustainable seawater desalination. One of the promising thermally-driven desalination methods is the direct-contact spray evaporation and condensation (DCSEC) where the excess enthalpy between feed and equilibrium states of evaporator chambers is exploited with reasonably high flashing efficiency. Further improvements in energy efficacy of DCSEC are boosted by firstly the incorporation of micro/nano-bubbles (M/NB) where micro or nano size subcooled vapor are embedded in the sprayed liquid droplets of evaporator, thereby lowering the temperature brine in evaporator and minimizing the thermal equilibrium effect of brine. The presence of subcooled bubbles increased the available surface area for heat transfer. Secondly, the concept of an evaporator-condenser pair of DCSEC could be extended to a multi-stage arrangement where the latent heat of vapor condensing on the water droplets sprayed within the condenser is recovered. From the experiments, the effect of incorporating the (M/NB) in the DCSEC at optimum feed flow rate yields more than 34% increase in distillate production at feed temperatures greater 47oC and the cooling inlet temperature set at 35oC. The other salient improvement found from the experiments is the increase in performance ratio (PR) up to 3.3 for a 6-stage configuration. This quantum jump in the PR is attributed to the heat recovery effect by as much as 70% of the total heat input. Arising from the DCSEC design, the implicit benefits are the low capital and operational cost, i.e., low CAPEX and OPEX. The former savings is attributed zero physical interfaces such as tube-based heat exchangers or membranes, whilst the latter savings is contributed by significant lesser use of chemicals in the pre-treatment of seawater feed. Lastly, the accompanied benefit is the robustness of the DCSEC processes where it could within stand high salinity of the brine, typically as high as 200,000 ppm.

This thesis deals with investment analysis tools focused on real estate. Thesis describes investment instruments in the Czech Republic and abroad. The practical part is devoted to equity indices, which focus on Central and Eastern Europe. The thesis describes the possible causes of the financial bubble in real estate stock markets and the impact of financial crisis on the evolution of these equities.

The extensive experimental results presented in this report provide a high-quality database for air-/water flows in a vertical pipe with a nominal diameter of 200 mm. This database can be used for the development and validation of CFD-like models for two-phase flows, e.g. for bubble coalescence and fragmentation. In particular, the investigations aim on the evolution of the two-phase flow along the pipe height. Therefore, up to 18 single measurements with varying distances between the gas injection and measurement plane were realised for each of the 92 combinations of gas and water flow rates. The pressure at the position of the activated gas injection was kept constant at 0.25 MPa(a). This boundary condition has the advantage that the measured data represent exactly the evolution of the flow along the pipe, i.e. they reflect a configuration at which the gas injection is at a fixed height position, while the measurement plane varies. Important results of this test series are time averaged radial profiles of the gas fraction, and the gas velocity, as well as the time and cross-section averaged bubble size distributions. Furthermore, gas fraction data resolved regarding the bubble size and spatial distribution are presented. As in previous test series, flow patterns were analysed, whereby the classification results from the bubble size. A substantial part of these new air/water experiments were quality and plausibility checks of the measured data. In the result, a clear and consistent trend regarding their evolution with increasing distance from the position of the gas injection was found. Comparisons of the trend of time and cross section averaged gas volume fraction along the pipe height with the theoretically expected values were carried out. The influence of the orifice diameter of the gas injection on flow patterns is also discussed in the report.

Die im Rahmen dieser Versuchsserie erzielten umfangreichen experimentellen Ergebnisse bilden eine hochwertige Datenbasis für Luft-Wasser-Strömungen in einem vertikalen DN200-Rohr, die für die Entwicklung und Validierung von CFD-Modellen, beispielweise bzgl. Blasenkoaleszenz und -fragmentierung, genutzt werden können. Besonderes interessant ist die Untersuchung der Entwicklung der Zweiphasenströmung über der Rohrhöhe. Aus diesem Grund wurden für jede der 92 betrachteten Kombinationen aus Gas- und Wasser-Volumenstromdichten bis zu 18 Messungen mit variablen Abständen zwischen Gaseinspeisung und Messebene durchgeführt. Dabei wurde der Druck an der Gaseinspeisestelle konstant auf 0,25 MPa(a) gehalten. Diese Randbedingung bietet den Vorteil, dass die so gemessenen Daten die Entwicklung der Strömung über der Rohrhöhe widerspiegeln, d.h. eine Konfiguration beschreiben, bei der das Gas an einer festen Höhenposition eingespeist wird und die Messungen in verschiedenen darüberliegenden Ebenen erfolgen. Wesentliche Ergebnisse dieser Messserie sind radiale zeitgemittelte Profile für den Gasgehalt und die Gasgeschwindigkeit sowie zeit- und querschnittsgemittelte Blasengrößenverteilungen. Außerdem liegen blasengrößen- und ortsaufgelöste Gasgehaltsdaten vor. Wie bereits bei früheren Versuchsserien wurden auch in diesem Fall die Strömungsformen analysiert, wobei die Klassifizierung anhand der Blasengröße erfolgte. Ein wesentlicher Bestandteil dieser neuen Luft/Wasser-Versuche war die Qualitäts- und Plausibilitätsprüfung der Messdaten. Es konnte festgestellt werden, dass die Daten einen eindeutigen, widerspruchsfreien Trend bzgl. ihrer Entwicklung mit zunehmendem Abstand von der Gaseinspeisung aufweisen. Zur Plausibilitätsprüfung wurden Vergleiche des Gasgehaltsverlaufes über der Rohrhöhe mit theoretisch zu erwartenden Kurven durchgeführt. Zusätzlich zu diesen Ergebnissen enthält der Bericht eine Einschätzung des Einflusses des Bohrungsdurchmessers an der Gaseinspeisung auf die sich einstellende Strömung.

The magnetization processes of antiferromagnetically (AF) coupled Co/Pt multilayers on extended substrates and of Co/Pd multilayers deposited on arrays of 58 nm spheres are investigated via magnetic force microscopy at room temperature by imaging the domain configuration in magnetic fields. Adding AF exchange to such perpendicular anisotropy systems changes the typical energy balance that controls magnetic band domain formation, thus resulting in two competing reversal modes for the system. In the ferromagnetic (FM) dominated regime the magnetization forms FM band domains, vertically correlated. By applying a magnetic field, a transition from band to bubble domains is observed. In the AF-exchange dominated regime, by applying a field or varying the temperature it is possible to alter the magnetic correlation from horizontal (AF state) to vertical (FM state) via the formation of specific multidomain states, called metamagnetic domains. A theoretical model, developed for complex multilayers is applied to the experimentally studied multilayer architecture, showing a good agreement. Magnetic nanoparticles have attracted considerable interest in recent years due to possible applications in high density data storage technology. Requirements are a well defined and localized magnetic switching behavior and a large thermal stability in zero fields. The thermal stability of [Co/Pt]N multilayers with different numbers of repeats (N), deposited on nanospheres is studied by magnetic viscosity measurements. The magnetic activation volume, representing the effect of thermal activation on the switching process, is estimated. It is found that the activation volume is much smaller than the volume of the nanosphere and almost independent of the number of bilayers supporting an inhomogeneous magnetization reversal process.