This thesis deals with problems of transportation of goods from Turkey to the Czech Republic. The goal of this thesis is to provide a comprehensive overview of geo-political, legal and economic knowledge, which could serve as a guide for small transportation companies. The overview is divided into three parts. The first part deals with multilateral agreements governing international road transport with emphasis on the CMR Convention. The second part is devoted to customs issues, in particular transit procedure. The third part deals with transport from the economic point of view. In this part, two transportation routes are proposed, which are then analysed considering time, safety and cost.

京都大学 / 0048 / 新制・課程博士 / 博士(理学) / 甲第21562号 / 理博第4469号 / 新制||理||1641(附属図書館) / 京都大学大学院理学研究科物理学・宇宙物理学専攻 / (主査)准教授 國友 浩, 教授 杉本 茂樹, 教授 田中 貴浩 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DFAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第22014号 / 工博第4626号 / 新制||工||1721(附属図書館) / 京都大学大学院工学研究科高分子化学専攻 / (主査)教授 山子 茂, 教授 辻井 敬亘, 教授 竹中 幹人 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 新制・課程博士 / 博士(理学) / 甲第23027号 / 理博第4704号 / 新制||理||1675(附属図書館) / 京都大学大学院理学研究科化学専攻 / (主査)教授 依光 英樹, 教授 時任 宣博, 教授 若宮 淳志 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

京都大学 / 新制・課程博士 / 博士(工学) / 甲第23229号 / 工博第4873号 / 新制||工||1760(附属図書館) / 京都大学大学院工学研究科合成・生物化学専攻 / (主査)教授 松田 建児, 教授 杉野目 道紀, 教授 生越 友樹 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

Regenerative heat exchangers are established as a means of heat recovery in many industrial applications. The fixed-bed regenerators are mostly used to transfer heat from hot flue gas to cold air. In this work, several mathematical models of regenerators and several calculation methods were compared, while the preferred method is Willmott’s open method from 1964. Analysis of the influence of geometrical and operational parameters was carried out for the linear regenerator model.

The aim of this thesis is to realize analysis of problematics of aerodynamic calculations of steam boilers on the part of combustion air. On the basis of project documentation realize evaluations of sectional dissipation factors of each component of inlet tract. Realize calculation of summary pressure (draft) loss. Specify components with highest loss and propose options of their optimization.

This Master's thesis is focused on dealing with cost variances (deviations) and using of standard costing method. The main intent is to analyse current state and make an improvement proposal of focusing on variables in company which is producing server PCs. This thesis is divided into three parts, which are theroretical part, analytic part and proposal part. The theoretical part is focused on characteristics of controlling, costs, calculation methods, especially standard costing method and focusing on variances. In next two parts is made the analysis of current state and then are suggested some improvement proposals.

The master thesis focuses on the strength calculation of piping with extra consideration given to the local effects of thermal loads. To be recognized as properly functioning, the piping is required to withstand the expected operating conditions in order to enable the continuous transport of the working fluid within the interconnected devices. It is imperative to take into consideration the variable thermal load in the area where the individual pipe branches connect into the main transmission piping. A major part of the thesis is concerned with the assessment of the expected workload influence on the most stressed parts of the system. The data are gathered by employing temperature and stress-strain analyses carried out in the ANSYS Mechanical program using the finite element method. The values based on the analyses are cross-checked with both the permitted values according to the ASME standard B31.3 Process piping and the ASME Boiler and Pressure Vessel Code stress categorization method. Since all the evaluated stresses are below their respective permissible values, the piping strength is concluded as satisfactory according to the standards.

The thesis deals with the design of the steam turbine for a waste incinerator. First, the concept and design of the machine is discussed. Following part is the steam turbine thermodynamics calculation, which is the main part of the thesis. My work also contains calculation of axial force and a simplified calculation of the gearbox. The design sections of individual modules and drawing of a disposition of a steam turbine are made on the based of the calculation.