In this thesis, we present a new hybrid pre-coded direct-sequence code division multiple access (DS-CDMA) system framework that use the multiple-input multiple-output (MIMO) antennas along with Alamouti¡¦s space-time block code (ST-BC). In the transmitter, the idea of hybrid pre-coded is exploited. It not only used to counteract the inter-symbol interference (ISI) introduced by the channel fading duo to multipath propagation but also very useful for exacting the phase of channel by appropriate design, which is not adopted in the conventional blind receiver. Under this structure, we propose a new blind adaptive MIMO-CDMA receiver based on the linearly constrained constant modulus (LCCM) criterion. To reduce the complexity of receiver design, framework of the generalized sidelobe canceller (GSC) associated with the recursive least square (RLS) algorithm is adopted for implementing the LCCM MIMO-CDMA receiver, and use gradient method to track the desired user¡¦s amplitude, simultaneously. Via computer simulations, advantages of the proposed scheme will be verified. Compared to the conventional blind Capon receiver, we will show that the performance of the proposed scheme is more robust against inaccuracies in the acquisition of the desired user¡¦s timing.

To effectively combat MAI and MI in wireless networks, we exploit complementary code technique in this thesis. Terminals in cooperative communication system are not only doing the transmission or relaying, but also involve a novel strategy "network coding" which has been investigated widely. In our work, we aim to combine network coding into the conventional cooperative communication system, but we face certain problems in it. Cooperative system has diversity at the destination, but when network coding operation involved, theoretically, it violate the rules of diversity, since the new signals transmitted by relay are no longer as same as the signals from sources. However, we discover a method to solve this problem, which is using the multiplier in relay nodes to replace the conventional network coding operation- XOR. After creating the network coding-based system, our goal is to achieve diversity in cooperative communication system. In this work, we use MRC (maximum ratio combining) for the performance analysis, which is the optimal strategy. Many math works will be shown in the following chapters.

As the size and power consumption of microelectronic circuits continues to decrease, passively-powered sensors promise to come to the forefront of commercial electronics. One of the most promising technologies that could realize this goal is backscatter sensing. Backscatter sensors could harvest power from and modulate data onto an impinging carrier waveform. Currently radio frequency identification (RFID) technology passively powers itself and transmits statically stored data. However, this technology has two major weaknesses: lack of resiliency against narrowband interference and slow data rates. Both of these issues could be detrimental in sensing applications. This thesis will lay out a method for addressing both of these weaknesses through a unique application of spread spectrum encoding. Instead of spread spectrum being viewed as the multiplication of an already encoded data sequence with a periodic pseudorandom sequence, each sequence could be viewed in an aperiodic manner, where a single period of a pseudorandom sequence represents a data symbol. In this manner, backscatter sensors not only benefit from the increased resiliency that spread spectrum provides, but also can have higher data rates, since multiple bits can be encoded on a single symbol and multiple nodes can be read simultaneously, using spread spectrum multiple access techniques. In this thesis, 63-chip and 255-chip Kasami sequences, as well as 127-chip Gold sequences, will be analyzed for their use in various aperiodic direct sequence spread spectrum/multiple access system configurations (systems that have up to three nodes and use up to four different aperiodic sequences per node to represent different symbols). For each different configuration, near-"ideal" code configurations/rotations will be determined for use in the system.

ITC/USA 2012 Conference Proceedings / The Forty-Eighth Annual International Telemetering Conference and Technical Exhibition / October 22-25, 2012 / Town and Country Resort & Convention Center, San Diego, California / We propose a spectrally-efficient multiple-access technique that is particularly suitable for aeronautical telemetry applications involving serial streaming of data from multiple test articles to a ground station. Unlike conventional frequency-division multiple access, we assign overlapping frequency bands to different users with a minimum carrier separation corresponding to the symbol rate. We utilize multiuser detection strategies at the ground station to separate the transmissions from different test articles. As shown by the simulation results, the proposed scheme is robust to large frequency offsets due to oscillator offsets and Doppler shifts commonly encounters in aeronautical telemetry applications.

Opportunistic spectrum reuse is a promising solution to the two main causes of spectrum scarcity: most of the radio frequency (RF) bands are allocated by static licensing, and many of them are underutilized. Frequency spectrum can be more efficiently utilized by allowing communication systems to find out unoccupied spectrum and to use it harmlessly to the licensed users. Reliable sensing of these spectral opportunities is perhaps the most essential element of this technology. Despite significant work on spectrum sensing, further performance improvement is needed to approach its full potential. In this dissertation, wireless spectrum sensing networks (WSSNs) are investigated for reliable detection of the primary (licensed) users, that enables efficient spectrum utilization and minimal power consumption in communications. Reliable spectrum sensing is studied in depth in two parts: a single sensor algorithm and then cooperative sensing are proposed based on a spectral covariance sensing (SCS). The first novel contribution uses different statistical correlations of the received signal and noise in the frequency domain. This detector is analyzed theoretically and verified through realistic simulations using actual digital television signals captured in the US. The proposed SCS detector achieves significant improvement over the existing solutions in terms of sensitivity and also robustness to noise uncertainty. Second, SCS is extended to a distributed WSSN architecture to allow cooperation between 2 or more sensors. Theoretical limits of cooperative white space sensing under correlated shadowing are investigated. We analyze the probability of a false alarm when each node in the WSSN detects the white space using the SCS detection and the base station combines individual results to make the final decision. The detection performance compared with that of the cooperative energy detector is improved and fewer sensor nodes are needed to achieve the same sensitivity. Third, we propose a low power source coding and modulation scheme for power efficient communication between the sensor nodes in WSSN. Complete analysis shows that the proposed scheme not only minimizes total power consumption in the network but also improves bit error rate (BER). / text

High data rate applications are the trend in today's wireless technology. W-CDMA standard was designed to support such high data rates of up to 3.84 Mcps. The main purpose of this research was to analyze the feasibility of a fixed-point implementation of the W-CDMA downlink receiver algorithm on a general-purpose digital signal processor (StarCore SC140 by Motorola). The very large instruction word architecture of SC140 core is utilized to generate optimal implementation, to meet the real time timing requirements of the algorithm. The other main aim of this work was to study and evaluate the performance of the W-CDMA downlink structure with incorporated space-time transmit diversity. The effect of the channel estimation algorithm used was extensively studied too.

Motivated by potential applications in wireless sensor networks, this thesis considers the problem of communicating a large number of correlated analog sources over a Gaussian multiple-access channel using non-orthogonal code-division multiple-access (CDMA). A joint source-channel decoder is presented which can exploit the inter-source correlation for interference reduction in the CDMA channel. This decoder uses a linear minimum mean square error (MMSE) multi-user detector (MUD) in tandem with a MMSE joint source decoder (JSD) for multiple sources to achieve a computational complexity that scales with the number of sources. The MUD and the JSD, then iteratively exchange extrinsic information to improve the interference cancellation. Experimental results show that, compared to a non-iterative decoder, the proposed iterative decoder is more robust against potential performance degradation due to correlated channel interference and offers better near far resistance.

Motivated by potential applications in wireless sensor networks, this thesis considers the problem of communicating a large number of correlated analog sources over a Gaussian multiple-access channel using non-orthogonal code-division multiple-access (CDMA). A joint source-channel decoder is presented which can exploit the inter-source correlation for interference reduction in the CDMA channel. This decoder uses a linear minimum mean square error (MMSE) multi-user detector (MUD) in tandem with a MMSE joint source decoder (JSD) for multiple sources to achieve a computational complexity that scales with the number of sources. The MUD and the JSD, then iteratively exchange extrinsic information to improve the interference cancellation. Experimental results show that, compared to a non-iterative decoder, the proposed iterative decoder is more robust against potential performance degradation due to correlated channel interference and offers better near far resistance.

In spread spectrum systems employing parity bit selected spreading sequences, parity bits generated from a linear block encoder are used to select a spreading code from a set of mutually orthogonal spreading sequences. In this thesis, turbo receivers for SS-PB systems are proposed and investigated. In the transmitter, data bits are rst convolutionally encoded before being fed into SS-PB modulator. In fact, the parity bit spreading code selection technique acts as an inner encoder in this system without allocating any transmit energy to the additional redundancy provided by this technique. The receiver implements a turbo processing by iteratively exchanging the soft information on coded bits between a SISO detector and a SISO decoder. In this system, detection is performed by incorporating the extrinsic information provided by the decoder in the last iteration into the received signal to calculate the likelihood of each detected bit in terms of LLR which is used as the input for a SISO decoder. In addition, SISO detectors are proposed for MC-CDMA and MIMO-CDMA systems that employ parity bit selected and permutation spreading. In the case of multiuser scenario, a turbo SISO multiuser detector is introduced for SS-PB systems for both synchronous and asynchronous channels. In such systems, MAI is estimated from the extrinsic information provided by the SISO channel decoder in the previous iteration. SISO multiuser detectors are also proposed for the case of multiple users in MC-CDMA and MIMO-CDMA systems when parity bit selected and permutation spreading are used. Simulations performed for all the proposed turbo receivers show a signi cant reduction in BER in AWGN and fading channels over multiple iterations.

Feedforward is known to be one of the best methods for power amplifier linearization due to its superior linearization performance and broadband stable operation. However feedforward systems have relatively poor power efficiency and are complicated due to the presence of two nonlinear amplifiers and the requirements of amplitude, phase and delay matching within two different loops. In this thesis stochastic characterization of a simple feedforward system with autocorrelation analysis has been presented for Code Division Multiple Access (CDMA) applications taking the amplitude and delay mismatches into consideration. It has been assumed that, the input signal can be represented as Gaussian noise, main and error amplifiers can be modeled with third order AM/AM nonlinearities and there exists no phase mismatch within the loops. Hence closed form expressions, which relate the main channel and distorted adjacent channel power at any point in the feedforward circuitry to the system parameters, have been obtained. Consequently, a mathematical handy tool is achieved towards specifying the circuit parameters rapidly for optimum linearity performance and efficiency. The developed analytical model has been verified by Radio Frequency (RF) and system simulations. An alternative approach towards modeling feedforward systems for arbitrary signals has also been brought into consideration and has been verified with system simulations.