171 |
CO2 (H2S)-SELECTIVE MEMBRANES FOR FUEL CELL HYDROGEN PURIFICATION AND FLUE GAS CARBON CAPTURE:AN EXPERIMENTAL AND PROCESS MODELING STUDYRamasubramanian, Kartik 15 October 2013 (has links)
No description available.
|
172 |
Bioinspired Redox Active Pseudotetrahedral Ni(II) Thiolate and Phenolate Complexes: Synthesis, Characterization, Alkylation Kinetics and Molecular Oxygen ActivationDeb, Tapash K. January 2013 (has links)
No description available.
|
173 |
CO2 capture in industry using chilled ammonia process / CO2-fångst i industrin med kyld ammoniakprocessAmara, Soumia January 2021 (has links)
CO2 capture and storage (CCS) is estimated to reduce 14% of the global CO2 emissions in the 2 °C scenario presented by the International Energy Agency. Moreover, post combustion capture is identified as a potential method for CO2 capture from industry since it can be easily retrofitted without disturbing the core industrial process. Among the post-combustion capture methods, absorption using mono-ethanol amine (MEA) is the most mature technology that has been demonstrated at plant scale. However, using chilled ammonia process as a post combustion capture technology in a cement industry can reduce 47% energy penalty for CO2 capture when compared to the conventional MEA absorption method. Hence, the current project aims at analyzing the chilled ammonia process when integrated with steel and ammonia plants. Key performance indicator like specific primary energy consumption per kilogram of CO2 avoided (SPECCA) is estimated and compared with MEA absorption method. Firstly, chilled ammonia process (CAP) for cement plant was used as reference case. Then, CAP for steel and ammonia processes was optimized by the means of the decision variables affecting the capture and energy efficiency. The energy consumption per kg CO2 captured and SPECCA was lower for the higher CO2 concentration in the flue gas. Results for SPECCA were 3,56, 3,52 and 3,61 MJ/kg CO2 for cement, steel, and ammonia plants, respectively.
|
174 |
Modélisation de l'absorption réactive multiconstituant : application au traitement des gaz acides par des solvants aux alcanolamines / Modelling of multicomponent reactive absorption : application to the acid gases treatment by alkanolamine solventsAhmadi, Aras 30 September 2011 (has links)
Les gaz issus de la combustion des énergies fossiles dans les centrales électriques contiennent une grande variété de polluants tels que les gaz-acides et ne peuvent être rejetés directement dans l'atmosphère. Ces polluants gazeux doivent être traités par des méthodes de captage en post combustion dans des colonnes d'absorption utilisant des solvants chimiques. L'objectif est donc de concevoir une unité d'élimination sélective des gaz-acides tels que CO2, H2S et COS en utilisant des solvants de la famille des alcanolamines. Cette thèse développe dans un premier temps, un modèle de non-équilibre, adapté aux systèmes multiconstituants électrolytiques et réactifs, pour la représentation des colonnes d'absorption réactive. Le modèle comporte des modules pour représenter la thermodynamique en espèces vraies (espèces ioniques et moléculaires), le transfert simultané de masse et de chaleur, et les réactions chimiques. Les équations généralisées de Maxwell-Stefan sont utilisées pour quantifier les interactions multiconstituants lors de la diffusion. Le schéma réactionnel est intégralement pris en compte dans la phase liquide, et les réactions chimiques peuvent être cinétiquement contrôlées ou à l'équilibre chimique instantané. La séparation réactive en régime permanent est ainsi simulée avec une description rigoureuse des phénomènes de réaction-diffusion dans les films diffusionnels. Dans un deuxième temps, une installation pilote de captage du CO2 par une solution aqueuse de diéthanolamine est mise en fluvre pour la validation expérimentale du modèle. La diéthanolamine a une forte réactivité vis-à-vis du CO2; ceci engendre un profil important de concentration du soluté dans la colonne. Le pilote est dédié à la validation de modèle, il est donc équipé de plusieurs unités d'échantillonnage gaz et liquide à différentes hauteurs de garnissage. Les profils longitudinaux de la concentration du CO2 en gaz et en liquide, de l'humidité absolue et de la température liquide peuvent être établis expérimentalement et être comparés avec ceux provenant de la simulation. L'outil de simulation validé devient alors un outil de prédiction de l'efficacité des unités réelles de captage par l'absorption réactive. / The exhaust gases coming from the combustion of fossil fuels in power plants contain a wide variety of pollutants such as acid gases and can not be discharged directly into the atmosphere. These gaseous pollutants must be treated by postcombustion capture methods in absorption columns using chemical solvents. The objective is then to design a selective removal unit of acid-gases such as CO2, H2S and COS by using solvents of the alkanolamine family. This thesis develops as the first step, a non-equilibrium model, adapted to multicomponent electrolytic and reactive systems, for the representation of reactive absorption columns. The model includes modules to represent the thermodynamics on the basis of true species (ionic and molecular species), the simultaneous heat and mass transfer, and the chemical reactions. The generalized equations of Maxwell-Stefan are used to take into account the multicomponent interactions during diffusion. The reaction scheme is fully included in the liquid phase, and the chemical reactions can be kinetically controlled or at instantaneous equilibrium. The reactive separation at steady-state conditions is then simulated with a rigorous description of the reaction-diffusion phenomena in diffusional films. In the second step, a pilot plant of CO2 capture with an aqueous solution of diethanolamine is implemented for experimental validation of the model. Diethanolamine has high reactivity with respect to CO2; this generates an important concentration profile of solute in the column. The pilot plant is dedicated to model validation; it is equipped with several gas and liquid sampling units at different heights of packing. The longitudinal profiles of the gas and liquid CO2 concentration, the absolute humidity and the liquid temperature can be established experimentally and compared with those from the simulation. The validated simulation tool then becomes a tool to predict the effectiveness of real capture units by reactive absorption.
|
175 |
Alkyl pipéridine démixantes pour le captage du CO2 : approche thermodynamique / Demixing Alkyl piperidines for CO2 capture : A thermodynamic approachLowe, Alexander Rowland 12 December 2016 (has links)
L'augmentation de la concentration de dioxyde de carbone (CO2) dans l'atmosphère depuis la révolution industrielle a conduit à l'augmentation de la température moyenne du globe. Pour limiter l’accroissement des températures atmosphériques moyennes, la quantité de dioxyde de carbone émise dans l'atmosphère doit être réduite. Une des solutions envisagée sur les sources fixes est le captage et le stockage du CO2. Ce procédé d’absorption/désorption, bien connu dans le traitement du gaz naturel, est onéreux et peu efficace pour le traitement du gaz des sources fixes et doit être optimisé. La solution proposée s’appuie sur l’utilisation de solvants démixants, présentant une séparation de phase équilibre liquide-liquide (LLE) en solution aqueuse en fonction de la température. Ce manuscrit présente une étude réalisée pour la famille des alkyl-pipéridines connues pour ses séparations de phase. Cette étude permettra d’évaluer l’influence de la taille, de la positionet du nombre de substituants sur les propriétés thermodynamiques d’intérêt pour le procédé. Pour étudier les LLE des solutions aqueuses démixantes, en particulier dans le cas des solutions chargées en gaz, deux instruments ont été mis au point. Il a été possible de démontrer que les changements opérés sur les diagrammes de phase des amines sont liés aux réactions chimiques mises en jeu lors de la dissolution du CO2. Pour les alkyl-pipéridines tertiaire on observe la température de démixtion diminue avec l’addition de CO2, allant avec la formation de carbonates. Avec les alkyl-pipéridines secondaires la température de démixtion augmente, ce qui est lié à la présence en solution de carbamates qui stabilisent la solution aqueuse. Le comportement des amines secondaires très encombrées, qui ne peuvent donc pas formées de carbamates, est similaire à celui des amines tertiaires, ce qui est cohérent avec les conclusions précédentes. Une étude approfondies des propriétés thermodynamiques d’excès (VE, CpE et HE) des alkyl-pipéridines en solution aqueuse a également permis de démontrer des relations structure - propriétés. La position du substituant sur le cycle pipéridine a une influence considérable et prévisible sur l’intensité des propriétés d’excès, alors que la nature de l’amine (secondaire ou tertiaire) va influencer la position de l’extremum de cette propriété. Enfin, une modélisation thermodynamique rigoureuses des solubilités et des enthalpies de dissolution du CO2 dans les solutions aqueuses de pipéridines a permis de déterminer les constantes de formation des carbamates dans les solutions aqueuses de 3- et 4-méthylpipéridines. / The increase of carbon dioxide (CO2) concentration in the atmosphere, since the industrial revolution has led to the rise in the average global climate temperature. To prevent the escalation of global climate temperatures the amount of CO2 emitted into the atmosphere must be reduced. One solution is carbon capture and sequestration which removes CO2 from fixed sources. The absorption/desorption cycle is well known for the treatment of acid gas, but is expensive and not as efficient for the treatment of gas from fixed/industrial sources. A solution to this problem is the use of aqueous demixing amine solvents which present a liquid-liquid phase equilibrium (LLE) as a function of temperature. This manuscript presents a study done to measure the LLE and thermodynamic properties of the alkyl piperidine family, which can be used for carbon capture processes. This work evaluates the effect of the size, position and number of alkyl substituents on the thermodynamic properties of interest in the carbon capture process. To study the LLE of aqueous demixing solutions, particularly gas loaded solutions, two novel apparatuses were developed. The results demonstrate that the changes in the amine phase diagrams are related to the chemical reactions involved with dissolution of CO2. The tertiary alkyl piperidines displayed reduced demixing temperature with the addition of CO2 due to the formation of carbonate species. The secondary alkyl piperidines display an increasing demixing temperature which is related to the formation of carbamate species which stabilizes the solution. Secondary alkyl piperidines that are severely sterically hindered, which cannot produce carbamates, behave similarly to the tertiary amine which is coherent with the preceding conclusion. The structure property relationship concerning the excess thermodynamic properties (VE, CpE et HE) of aqueous solutions were studied in depth. This revealed that the position of the substituents on the cyclic ring has a considerable and obvious influence on the intensity of the excess properties, along with the class of the amine, whether secondary or tertiary, will influence the positions of the extrema of the excess property. To conclude, a rigorous thermodynamic model based on the CO2 solubility and the enthalpy of solution for CO2 in aqueous solutions of alkyl piperidine, allowed for the determination of the carbamate formation constants of 3- and 4-methylpiperidine.
|
176 |
Opportunities and uncertainties in the early stages of development of CO2 capture and storageLind, Mårten January 2009 (has links)
The topic of this thesis is carbon dioxide (CO2) capture and storage (CCS), which is a technology that is currently being promoted by industries, scientists and governments, among others, in order to mitigate climate change despite a continued use of fossil fuels. Because of the complex nature of CCS and the risks it entails, it is controversial. The aim of this thesis is to analyse how the technology may be further developed in a responsible manner. In the first part of the thesis different methods for capturing CO2 from industrial processes as well as power plants are analysed. The aim is to identify early opportunities for CO2 capture, which is considered important because of the urgency of the climate change problem. Three potential early opportunities are studied: i) capturing CO2 from calcining processes such as cement industries by using the oxyfuel process, ii) capturing CO2 from pressurised flue gas, and iii) capturing CO2 from hybrid combined cycles. Each opportunity has properties that may make them competitive in comparison to the more common alternatives if CCS is realised. However, there are also drawbacks. For example, while capturing CO2 from pressurised flue gas enables the use of more compact capture plant designs as well as less expensive and less toxic absorbents, the concept is neither suitable for retrofitting nor has it been promoted by the large and influential corporations. The second part of the thesis has a broader scope than the first and is multidisciplinary in its nature with inspiration from the research field of Science and Technology Studies (STS). The approach is to critically analyse stakeholder percep-tions regarding CCS, with a specific focus on the CCS experts. The thesis sheds new light on the complexity and scientific uncertainty of CCS as well as on the optimism among many of its proponents. Because of the uncertain development when it comes to climate change, fossil fuel use and greenhouse gas emissions, the conclusion is that CCS has to be further developed and demonstrated. A responsible strategy for a future development of CCS would benefit from: i) a search for win-win strategies, ii) increasing use of appropriate analytical tools such as life-cycle analysis, iii) a consideration of fossil fuel scarcity and increasing price volatility, iv) funding of unbiased research and v) increasing simultaneous investments in long-term solutions such as renewable energy alternatives and efficiency improvements. / QC 20100727
|
177 |
Advanced modeling and simulation of integrated gasification combined cycle power plants with CO2-capture / Fortgeschrittene Modellierung und Simulation von GuD-Kraftwerken mit integrierter Kohlevergasung und CO2-AbtrennungRieger, Mathias 14 August 2014 (has links) (PDF)
The objective of this thesis is to provide an extensive description of the correlations in some of the most crucial sub-processes for hard coal fired IGCC with carbon capture (CC-IGCC). For this purpose, process simulation models are developed for four industrial gasification processes, the CO-shift cycle, the acid gas removal unit, the sulfur recovery process, the gas turbine, the water-/steam cycle and the air separation unit (ASU). Process simulations clarify the influence of certain boundary conditions on plant operation, performance and economics. Based on that, a comparative benchmark of CC-IGCC concepts is conducted. Furthermore, the influence of integration between the gas turbine and the ASU is analyzed in detail. The generated findings are used to develop an advanced plant configuration with improved economics. Nevertheless, IGCC power plants with carbon capture are not found to be an economically efficient power generation technology at present day boundary conditions.
|
178 |
Characterization of microalgae native to Quebec for biofuel productionLeite, Gustavo Balduino 12 1900 (has links)
No description available.
|
179 |
Advanced modeling and simulation of integrated gasification combined cycle power plants with CO2-captureRieger, Mathias 17 April 2014 (has links)
The objective of this thesis is to provide an extensive description of the correlations in some of the most crucial sub-processes for hard coal fired IGCC with carbon capture (CC-IGCC). For this purpose, process simulation models are developed for four industrial gasification processes, the CO-shift cycle, the acid gas removal unit, the sulfur recovery process, the gas turbine, the water-/steam cycle and the air separation unit (ASU). Process simulations clarify the influence of certain boundary conditions on plant operation, performance and economics. Based on that, a comparative benchmark of CC-IGCC concepts is conducted. Furthermore, the influence of integration between the gas turbine and the ASU is analyzed in detail. The generated findings are used to develop an advanced plant configuration with improved economics. Nevertheless, IGCC power plants with carbon capture are not found to be an economically efficient power generation technology at present day boundary conditions.
|
180 |
Polymer-silica Hybrids for Separation of CO2 and Catalysis of Organic ReactionsSilva Mojica, Ernesto 15 May 2014 (has links)
No description available.
|
Page generated in 0.0585 seconds