Les accidents vasculaires cérébraux (AVC) sont la première cause de handicap de l'adulte. Favoriser la plasticité cérébrale post-lésionnelle représente un objectif thérapeutique majeur. Dans ce contexte, la thérapie cellulaire a récemment émergé. Son action, fondée sur la " réparation " du tissu cérébral, a montré un bénéfice sur la récupération fonctionnelle dans des modèles d'ischémie cérébrale. La transposition de ce traitement à l'homme reste à ce jour limitée à des études pilotes. Dans nos travaux précliniques, nous avons montré, après un infarctus cérébral chez le rat, une bonne tolérance et un bénéfice fonctionnel de l'administration intracérébrale (à la phase aiguë) et intraveineuse (à la phase subaiguë) de cellules souches mésenchymateuses humaines (CSMh) de grade clinique. La survie des CSMh greffées (possible durant plusieurs semaines) et leur différenciation en cellules d'intérêt (neurones, astrocytes) sont très faibles et ne peuvent expliquer à elles seules le bénéfice observé. Parmi les mécanismes d'action possibles des CSM (effet neurotrophique, pro-angiogénique, immunomodulation...), nous avons mis en évidence par IRM un effet microvasculaire précoce. Nous avons également montré l'innocuité du marquage des CSMh par microparticules ferriques pour l'IRM cellulaire et la microscopie. Ce marquage cellulaire est utile pour détecter et suivre par IRM des cellules greffées au sein du cerveau (durant au moins 15 jours), mais nous a paru insuffisant dans le cadre d'une injection IV. Pour évaluer la biodistribution des CSMh injectées par voie IV à la phase subaiguë, nous avons effectué une étude par imagerie nucléaire qui a permis d'identifier l'attraction rapide de CSMh vers l'infarctus cérébral. En parallèle, la mise en place d'un essai clinique de phase 2 a été effectuée. Le délai, la voie optimale d'administration ainsi que la source cellulaire à utiliser restent encore controversés. L'optimisation de la thérapie cellulaire nécessite encore le développement de projets de recherche translationnelle associant les études expérimentales et les essais cliniques. C'est dans ces conditions que la thérapie cellulaire pourrait devenir un traitement efficace après un AVC.

This master’s thesis deals with designs and implementation of systems for music cover recognition. The introduction part is devoted to the calculation parameters from audio signal using Music Information Retrieval techniques. Subsequently, various forms of cover versions and musical aspects that cover versions share are defined. The thesis also deals in detail with the creation and distribution of a database of cover versions. Furthermore, the work presents methods and techniques for comparing and processing the calculated parameters. Attention is then paid to the OTI method, CSM calculation and methods dealing with parameter selection. The next part of the thesis is devoted to the design of systems for recognizing cover versions. Then there are compared systems already designed for recognizing cover versions. Furthermore, the thesis describes machine learning techniques and evaluation methods for evaluating the classification with a special emphasis on artificial neural networks. The last part of the thesis deals with the implementation of two systems in MATLAB and Python. These systems are then tested on the created database of cover versions.

Cause-specific mortality (CSM), among other global health estimates, has garnered prominence in the contemporary public health field. CSM has been associated with several factors, however, research comparing CSM for prefracking versus postfracking periods is sparse. Hydraulic fracturing or fracking is a technique of extracting oil and gas from deep underground. The purpose of this study was to evaluate the difference among mean CSM scores from 1975 through 2015 in the available cities and counties of residence in Colorado and to determine the impact of gender, marital status, county of residence, and city of residence on CSM scores (prefracking period 1975-1977 versus postfracking period 1999-2015) among adults aged 45-70 years. In this retrospective quantitative study, the socioecological model of health was used to analyze 73,251 cases obtained from the Colorado Department of Public Health and Environment. One-way analysis of variance and multiple regression were used to analyze data. Results showed that Denver County had a higher mean CSM score compared to other counties in Colorado. Regression results revealed a significant but weak association between CSM scores and gender, marital status, city of residence, and county of residence. If gender, marital status, and county of residence can be significant predictors of CSM, this information could have social change implications by influencing decisions regarding CSM and fracking.

By combining laboratory experiments with field work, I have looked at the following aspects of cellular slime mould (CSM) biology: (a) the genetic structure of social groups (fruiting bodies) in the wild and its relation to the role of large mammals as dispersal agents; (b) social behaviour in clonal, intra-species polyclonal and interspecies social groups and (c) fitness-related trade-offs with respect to life history traits as a possible mechanism for coexistence and cooperative behaviour in CSMs. The major findings of this study are as follows: (a) individuals belonging to different strains of a species, different species and genera occur in close proximity, even on a speck of soil (250µm–1mm) or the same dung pat; (b) social groups formed in the wild by Dictyostelium giganteum and D. purpureum are generally multiclonal; (c) genetically diverse strains can co-aggregate and form chimaeric social groups; (d) in chimaeric social groups, strains differ in their relative sporulation efficiencies; (e) the fact that strains co-exist in spite of this may be attributable in part to trade-offs between various fitness-related traits as can be demonstrated in the case of wild isolates of D. giganteum in pair wise mixes. The Dictyostelids or CSMs are haploid, eukaryotic, soil dwelling social amoebae with an unusual life cycle (Bonner, 1967; Raper, 1984). They exist as single cells in the presence of food (bacteria, yeast, fungal spores). Once the food is exhausted, they enter the social phase of their life cycle. Approximately 102 to 106 amoebae aggregate at a common collection point and form a starvation resistant structure called the fruiting body. In many species a fruiting body is made up of an aerial stalk of dead cells and a ball of viable spores on top. In other CSM species (not part of this study), all amoebae in a fruiting body differentiate into spores and the stalk is an extracellular secretion. The CSM life cycle raises fundamental questions related to the evolution of an extreme form of ‘altruism’ in the form of reproductive division of labour in social groups. The spore–stalk distinction in the CSMs is analogous to the germ–soma distinction in metazoans, although, the CSMs achieve multicellularity not by repeated divisions of a zygote but via the aggregation of many cells which may or may not be clonally related (Bonner, 1982; Kaushik and Nanjundiah, 2003). Social behaviour in the CSMs offers interesting parallels to what is seen in the social insects (Gadagkar and Bonner, 1994). The origin and maintenance of ‘altruism’ has been a long-standing issue in sociobiology. Because of their simple life cycle and experimental tractability, the CSMs are ideal for studying the evolutionary origin and maintenance of social behaviour, in particular of ‘altruistic’ behaviour. By elevating spores above soil level, stalk cells, protect them from noxious compounds and predators present in soil and also facilitate their passive dispersal. In the course of doing so they die. The death of stalk cells appears to be an extreme form of altruism. Knowledge of the genetic structure of social groups and populations including patterns of kinship is essential for modelling the evolution of ‘altruism’. Thus, it is important to understand the genetic structure of CSM social groups in the wild. For this, social groups (fruiting bodies) of CSMs were isolated from undisturbed forest soil of the Mudumalai forest reserve in South India. Soil and animal dung samples were brought to the laboratory and quasi-natural social groups were generated by inoculating the samples on non-nutrient agar. The fruiting bodies from various CSM species were formed by these isolates. Since soil and dung samples were not perturbed in any way, the fruiting bodies were formed as they would have in nature. When compared to soil, dung samples contained a higher CSM diversity and more CSM propagules. The presence of CSMs in fresh animal dung makes it likely that they were transported and dispersed over long distances through the gut of these animals. Such dispersal is likely to be preceded by a thorough mixing of spores in the gut. That increases the probability of co-occurrence of different genotypes in a social group. This possibility was confirmed by genetically characterizing spores in social groups of Dictyostelium giganteum and D. purpureum collected from the wild. Random amplification of polymorphic DNA (RAPD), a simple and reliable molecular technique, was used for genotyping spores within a fruiting body. 17 fruiting bodies (8 from animal dung and 9 from soil) were studied. 15 out of 17 (9 out of 11 of D. giganteum and 6 out of 6 D. purpureum) were polyclonal; the minimum number of distinct clones in a single fruiting body was 3 to 7 (animal dung) and 1 to 9 (soil). Therefore in D.giganteum and D. purpureum, chimaeric social groups seem to be the norm. This suggests that other species of CSMs form intra-species chimaeric social groups in wild, though clonal fruiting bodies occur too. The next objective of this thesis was to test whether genetic heterogeneity had functional consequences. That is, when different strains come together in an aggregate, do they contribute equally to the reproductive (spore) and non-reproductive (stalk) pathways? Amoebae of different clones (strains) of D. giganteum or D. purpureum were mixed and developed together and the number of spores formed by each strain was counted. These experiments confirmed that strains of D. giganteum or D. purpureum can aggregate together and form chimaeric fruiting bodies. The ability to mix (measured as the frequency of chimaerism) depended on the strains used and varied from one mix to another. One strain was often found to ‘exploit’ the other during sporulation, that is, it formed more spores than its expected share. Despite this, strains are found in very close proximity in the soil, which raises an important question: when one strain is more efficient at sporulating than other, how can the two co-exist stably? To investigate what might lie behind the stable co-existence of strains, I studied various fitness-related traits in the life cycle of D. giganteum. They included the rate of cell division, the time taken to go through multicellular development, the efficiency of slug migration through various depths of soil and the probability of differentiation into a spore. Measurements were carried out on strains taken separately and on their pair wise mixes. Five different D. giganteum wild strains (46a3, 46d2, 48.1a1, F5 and F16) were used. All were isolated from the Mudumalai forest (India). 46a3 and 46d2 came from soil within 10 cm of each other, 48.1a1 from soil about 200m away from 46a3; and F5 and F16 from the same fruiting body (Kaushik et al., 2006; Sathe et al., 2010). Members of a pair differed significantly in the measured fitness-related traits. For example, in the case of 48.1a1 and 46d2, 48.a1 grew faster than 46d2 both individually and in a mix. After starvation, 48.1a1 formed fruiting bodies faster than 46d2; a mix of the two developed at the rate of the faster member, implying that the slower one (46d2) gained from the association with 48.1a1. During slug migration, slugs formed by 48.1a1 came up through a higher depth of soil than 46d2 slugs and did so earlier. Chimaeric slugs were like the more efficient member, 48.1a1, in terms of the maximum depth of soil that was covered, but like the less efficient member, 46d2, in terms of the time taken for slugs to be seen on the soil surface. 48.1a1 seems to have an advantage over 46d2 in all these respects. However, during sporulation in chimaeras, 48.1a1 formed relatively fewer spores than 46d2. Similar trade-offs were seen in all mixes. F5 and F16 displayed an unexpected feature during sporulation; the spore-forming efficiency of either strain depended on its proportion in the initial mix in a frequency-dependent manner that was consistent with a stable equilibrium. Thus, trade-offs between different fitness-related traits contribute to the co-existence of strains. Next, I studied interactions between members of different CSM species. Several species of CSMs were isolated from the same environment (Sathe et al., 2010); a question of interest was to see if amoebae of different species came together to form a chimaeric multicellular body. Five strains (two D. purpureum and three D. giganteum) were used in this study. Amoebae of D. giganteum and D. purpureum co-aggregated. However, there were factors that caused amoebae of the two species to sort out thereafter. The extent of segregation differed between strains, a characteristic that inter-species mixes share with intra-species mixes. In conclusion, the ability of cellular slime moulds to form multiclonal social groups in the wild suggests that one should look to factors in addition to close relatedness to understand the evolution of CSM social behaviour. The existence of fitness-related trade-offs between different traits indicates that individual-level selection can also contribute to the maintenance of chimaeric social groups.

La leucémie myélomonocytaire chronique (LMMC) est une hémopathie myéloïde rare du sujet âgé. Les caractéristiques cliniques, génétiques et moléculaires de la maladie sont bien connues. L’expression très hétérogène de la maladie ne peut être expliquée par la seule hétérogénéité génétique du clone leucémique. Les altérations épigénétiques jouent manifestement un rôle important. Le rôle de facteurs extrinsèques issus du microenvironnement est plus obscur. La niche hématopoïétique est le siège d’interactions entre cellules. Deux schémas non-exclusifs d’altération primaire ou secondaire de la niche sont proposés. Le premier implique que l’émergence d’un clone hématopoïétique modifie son environnement. Le second postule que le premier évènement dans l’émergence d’une hémopathie clonale est une altération de l’environnement. Mon travail de thèse a étudié les altérations du microenvironnement médullaire chez les patients et leur impact sur la physiopathologie de la maladie selon 2 axes: 1) la mise au point d’un modèle murin de reconstitution de la niche hématopoïetique humaine et 2) la caractérisation des cellules souches mésenchymateuses des patients. Dans une première partie, j’ai transposé un modèle rapporté en 2016 à l’étude de la LMMC. Ce modèle de greffe de cellules médullaires humaines chez la souris immunodéprimée s’est avéré difficilement reproductible. Dans la seconde partie, j’ai analysé les cellules souches mésenchymateuses de patients atteints de LMMC. J’ai identifié la production excessive d’IGFBP2 (Insuline-like Growth Factor Binding Protein 2), conséquence probable d’une dérégulation épigénétique. Le séquençage des CSM à l’échelle unicellulaire a révélé une restriction de l’hétérogénéité de ces cellules dont une fraction seulement produit IGFBP2. Finalement, j’ai montré qu’IGFBP2 favorise la différenciation des progéni-teurs myéloïdes vers la lignée monocytaire. IGFBP2 pourrait donc contribuer à amplifier la monocytose caractéristique de cette maladie.En conclusion, la LMMC s’accompagne de modifications des cellules de la niche hématopoÏétique dont certaines produisent des quantités excessive d’IGFBP2. La recherche de l’origine de ce dérèglement et de son importance dans la progression de la maladie permettra d’évaluer l’intérêt potentiel d’une neutralisation de cette cytokine à des fins thérapeutiques. / Chronic myelomonocytic leukemia (CMML, is a rare myeloid hemopathy of the elderly. Clinical, genetic and molecular characteristics of the disease are well-known. The highly heterogeneous expression of the disease can’t be solely explained by genetic heterogeneity of the leukemic clone. Epigenetic alterations obviously play an important role. However, the role of extrinsic factors from the medullar microenvironment in CMML physiopathology is still poorly understood. The hematopoietic niche hosts a lot of bi-directionnal interactions between cells. Two non-exclusive schemes of primary and secondary alterations of the niche can be proposed. First postulate implies that the emergence of a hematopoietic clone alters its environment. The second one supposes that the first event causing the emergence of a clonal hemopathy is an alteration of the environment. My PhD work consisted of studying medullar alterations in patients and their impact on CMML physiopathology upon 2 axes: 1) to set up a murine model of human hematopoietic niche reconstitution 2) to caracterise mesenchymal stem cells from CMML patient ex vivo. During the first part of my PhD, I adapted a model published in 2016 to CMML. This model of human MSC graft in immunodeficient mice proved to be hardly reproducible. During the second part, I analysed of CMML patients MSC. I identified an excessive production of IGFBP2 (Insuline-like Growth Factor Binding Protein 2) probably secondary to an epigenetic disregulation. Single cell RNA sequencing revealed a restriction of MSC heterogeneity of which only a fraction produces IGFBP2. Finally, I showed that IGFBP2 favors myeloid progenitors differenciation towards monocytic lineage. IGFBP2 could therefore contribute to the amplification of CMML characteristic monocytosis.To conclude, CMML goes along with modifications of hematopoietic niche cells, some of which produce excessive amounts of IGFBP2. Investigation on the origin of this alteration and its significance in disease progression should allow to evaluate the potential interest of its neutralization for therapeutic strategies.

The procedures of the study are mainly through the review on the relevant reference documents related to the subject of those have been published domestically and internationally, meanwhile to get a better understanding on the most recent development on Information Technology and its associated models which are being applied to the customer relationship management by the organizations and/or business units in the world. Then, through the investigation and review on steel industries to understand the real situations domestically and internationally, specifically to focus on the Sheng Yu Steel Co., Ltd. As an example, for which to plan the implementation of Extranet System for the improvement of Customer Relationship Management (CRM) by using Information Technology, what problems it will be faced and how is the best strategyfor this implementation. Then after the completion of the study, to make a constructive recommendation to the Sheng Yu Steel Co., Ltd as an useful reference when the Extranet system to be planned and implementedfor. In Chapter-1 ¡©Introduction¡ª¡Ato descibe the backgroud, purposes, procedures and the limitation related to the study¡Fin Chapter-2, the major is concentrate on the review and understand on the relevant documents of the subject related¡Fin Chapter-3, specifically to focus on the existing situations of the steel industries and the Sheng Yu Steel Co., Ltd. how it is the current situation to the subject issue¡Fin Chapter-4, to have further investigation on recent situations for the use of Information Technology in Sheng Yu Steel Co., Ltd. to make a recommendation for their reference whn they plan for the implementation of Extranet System for the improvement of Customer Relationship Management¡Fand finally, in Chapter-5, to describe the findings and issues for whicht to be expected to have further study in the future to come up a generalized model for which can be applied to all companies not only for steel industies but also to all conventional enpterprises as an important and valuable reference guideline.

Man-made materials such as fiber-reinforced composites (FRCs) can be tailored for optimum performance in product design applications in terms of strength and weight. The current work is aimed at studying the behaviors of composite laminates based on E-glass CSM (Chopped Strand Mat) or WRM (Woven Roving Mat) plies with a polyester resin for impact protection applications. Detailed mechanical characterization of CSM and WRM laminates till failure is carried out for tensile, compressive and shear loads by varying manufacturing process, number of plies, and laminate thickness. The effect of fiber volume fraction on mechanical properties is shown. The efficacy of CSM and WRM laminates as energy- absorbing countermeasures is studied by performing quasi-static and axial impact tests on cylindrical tubes made of the stated FRCs. In addition to load-displacement and specific energy absorption attributes, failure modes are of interest in such studies. The potential of FRC laminates for protection against projectile impact is investigated by performing low velocity impact perforation tests with a falling tup fitted with an indentor, and medium to high velocity projectile impact tests in a gas gun-based device. The valuable results generated are used for the validation of nonlinear finite element-based CAE (Computer-Aided Engineering) procedures including application of a multi-modal failure criterion for explicit dynamic analysis. The present study not only throws light on complex mechanical behavior of an important class of lightweight materials under static and dynamic loads, but also simulation tools for the design of impact safety countermeasures such as bullet-proof laminates and energy–absorbing components for automotive body structures.