Spelling suggestions: "subject:"barbon differentenvironmental aspects"" "subject:"barbon digitalenvironmental aspects""
21 |
Response of Pinus banksiana (Lamb.) families to a global change environmentCantin, Danielle, 1967- January 1994 (has links)
We examined how fast- and slow-growing families (based on height at 10 years) of Pinus banksiana Lamb. are affected by a climate altered by CO$ sb2$ during their first growing season. Our primary objective was to evaluate the possibility that genotypes performing best under present conditions may not necessarily do best under projected warmer climate. Seedlings were grown for six months in two climatic environments (350 $ mu$L/L CO$ sb2$ x present temperatures and 700 $ mu$L/L CO$ sb2$ x 4$ sp circ$C warmer temperatures) and with 100 ppm and 5 ppm nitrogen. / The CO$ sb2$T$ sp circ$ environment had a significant effect on most biomass components of seedlings and water-use efficiency but not on height and other growth variables. The nitrogen fertilization was generally the most significant effect of the treatments for most growth variables. / All the families responded in a similar way to variations in the growing environments except for WUE. Family differences were more important for measurements of height and growth variables than for biomass components. The architecture of seedlings was also highly variable between families. Norm of reaction graphs were built for several growth variables to outline which families were overall most successful in an enriched CO$ sb2$T$ sp circ$ environment. Of the 15 families studied, four of them were classified as most successful in a projected high CO$ sb2$T$ sp circ$ climate.
|
22 |
How do nitrogen-fixing trees influence the extent to which forests mitigate and exacerbate climate change?Kou-Giesbrecht, Sian January 2021 (has links)
Nitrogen (N)-fixing trees can both mitigate climate change, by relieving N limitation of plant growth which promotes carbon dioxide (CO²) sequestration in plant biomass, and exacerbate climate change, by stimulating nitrification and denitrification which promotes nitrous oxide (N²O) emissions from soils. The balance between the negative radiative forcing (CO² sequestration in plant biomass) and positive radiative forcing (N²O emissions from soils) of N-fixing trees is unresolved. In this thesis I use a sequence of theoretical and empirical approaches to investigate the influence of N-fixing trees on CO² sequestration by forests and N²O emissions from forest soils, i.e., the net CO²-N²O effect of forests.
The first chapter establishes a basis for the N²O effect of N-fixing trees with a meta-analysis, to accompany existing meta-analyses of the CO² effect of N-fixing trees. Chapter one demonstrates that N- fixing trees significantly increase N²O emissions from forest soils relative to non-fixing trees. The second chapter explores the controls and potential global importance of the net CO²-N²O effect of N-fixing trees using a theoretical ecosystem model. The third chapter explores the net CO²-N²O effect of N-fixing trees under manipulations of these controls with a field experiment paired with a modified version of the theoretical ecosystem model from the second chapter. Together, chapters two and three suggest that the net CO²-N²O effect of N-fixing trees is controlled by N limitation of plant growth and the extent to which N-fixing trees can regulate N fixation: N-fixing trees mitigate climate change relative to non-fixing trees under N limitation of plant growth, but N-fixing trees that cannot regulate N fixation exacerbate climate change relative to non-fixing trees under non-N limitation of plant growth. The fourth chapter represents the ecological mechanisms studied in chapters one, two and three in a land model: LM4.1-BNF is a novel representation of biological N fixation (BNF) and an updated representation of N cycling in the Geophysical Fluid Dynamics Laboratory Land Model 4.1 (LM4.1). LM4.1-BNF includes a mechanistic representation of asymbiotic BNF by soil microbes, the competitive dynamics between N-fixing and non-fixing plants, N limitation of plant growth, and N2O emissions from soils. Together these chapters elucidate the influence of N-fixing trees on the capacity of forests to mitigate and exacerbate climate change and establish a framework to analyse and project the trajectory of the net CO²-N²O effect of forests under global change.
|
23 |
Response of Pinus banksiana (Lamb.) families to a global change environmentCantin, Danielle, 1967- January 1994 (has links)
No description available.
|
24 |
The environmental Kuznets curve reexamined for CO₂ emissions in Canadian manufacturing industries /Li, Zhe, 1974- January 2004 (has links)
No description available.
|
25 |
Ultra-Broadband Silicon Photonic Link Design and OptimizationJames, Aneek January 2023 (has links)
Carbon emissions associated with deep learning and high-performance computing have reached critical levels and must be addressed to mitigate the potential damage to the environment. Optical solutions have been widely accepted as a necessary part of any comprehensive intervention, primarily in the form of ultra-broadband wavelength-division multiplexing (WDM) optical interconnects to connect spatially distanced compute nodes and, in the further term, as dedicated photonic deep learning accelerators and photonic quantum computers.
Silicon photonic interconnects provides the most promising platform for satisfying the required performance, device density, and total wafer throughput by leveraging the same mature complementary metal–oxide–semiconductor (CMOS) infrastructure used to fabricate modern electronic chips. However, implementing these links at scale requires unprecedented levels of integration density in the associated silicon photonic integrated circuit (PICs). The potential explosion in PIC density poses a significant design challenge towards guaranteeing that designers are capable of both an exhaustive design space exploration and rigorous design optimization within reasonable design cycles. Higher level design abstractions—that is, representations of designs that accurately capture system behavior while simultaneously reducing model complexity—are needed for moreefficient design and optimization of PICs.
This work contributes two novel design abstractions for the rapid optimization of ultra-high-bandwidth silicon photonic interconnects. The first contribution is a novel process variation-aware compact model of strip waveguides that is suitable for circuit-level simulation of waveguide-based process design kit (PDK) elements. The model is shown to describe both loss and—using a novel expression for the thermo-optic effect in high index contrast materials—the thermo-optic behavior of strip waveguides. Experimental results prove the reported model can self-consistently describe waveguide phase, loss, and thermo-optic behavior across all measured devices over an unprecedented range of optical bandwidth, waveguide widths, and temperatures.
The second contribution is a generalized abstraction for designing WDM links in the multi-freespectral range (FSR) regime, a technique for avoiding aliasing while using microresonators with FSRs smaller than the total optical bandwidth of the link. Extensive simulation and experimental results prove that the aforementioned abstractions described collectively provide a powerful toolset for rapid interconnect design and optimization. The advances in this thesis demonstrate the utility of higher-level design abstractions for fully realizing the potential silicon photonics holds for keeping pace with ever-growing bandwidth demands computing systems in the post-Moore’s Law era and beyond.
|
26 |
Hybrid Catalytic Systems for the Sustainable Reduction of Carbon Dioxide to Value-Added OxygenatesBiswas, Akash Neal January 2023 (has links)
Atmospheric carbon dioxide (CO₂) concentrations have increased rapidly in recent decades due to the burning of fossil fuels, deforestation, and other industrial practices. The excessive accumulation of CO₂ in the atmosphere leads to global warming, ocean acidification, and other environmental imbalances, which may ultimately have wider societal implications. One potential solution to closing the carbon cycle is utilizing CO₂, rather than fossil fuels, as the carbon source for fuels and chemicals production. This lowers atmospheric CO₂ levels while simultaneously providing an economic incentive for capturing and converting CO₂ into more valuable products. This dissertation includes studies on three hybrid catalytic reactor systems coupling electrochemistry, thermochemistry, and plasma chemistry for the conversion of CO₂ into value-added oxygenates, such as methanol and C3 oxygenates (propanal and 1-propanol).
First, a tandem two-stage system is described where CO₂ is electrochemically reduced into syngas followed by the thermochemical methanol synthesis reaction. The work here specifically focuses on the electrochemical CO₂ reduction reaction to produce syngas with tunable H₂/CO ratios. Using a combination of electrochemical experiments, in-situ characterization, and density functional theory calculations, palladium-, gold-, and silver-modified transition metal carbides and nitrides were found to be promising catalysts for enhancing electrochemical activity while reducing the overall precious metal loading.
Second, another tandem two-stage system is demonstrated where CO₂ is electrochemically reduced into ethylene and syngas followed by the thermochemical hydroformylation reaction to produce propanal and 1-propanol. The CO₂ electrolyzer was evaluated with Cu catalysts containing different oxidation states and with modifications to the gas diffusion layer hydrophobicity, while the hydroformylation reactor was tested over a Rh₁Co₃/MCM-41 catalyst. The tandem configuration achieved a C₃ oxygenate selectivity of ~18%, representing over a 4-fold improvement compared to direct electrochemical CO₂ conversion to 1-propanol in flow cells.
Third, a hybrid plasma-catalytic system is investigated where CO₂ and ethane are directly converted into multi-carbon oxygenates in a one-step process under ambient conditions. Oxygenate selectivity was enhanced at lower plasma powers and higher CO₂ to C₂H₆ ratios, and the addition of a Rh₁Co₃/MCM-41 catalyst increased the oxygenate selectivity at early timescales. Plasma chemical kinetic modeling, isotopically-labeled CO₂ experiments, and in-situ spectroscopy were also used to probe the reaction pathways, revealing that alcohol formation occurred via the oxidation of ethane-derived activated species rather than a CO₂ hydrogenation pathway.
It is critical to assess whether the proposed CO₂ conversion strategies consume more CO₂ than they emit. A comparative analysis of the energy costs and net CO₂ emissions is conducted for various reaction schemes, including four hybrid pathways (thermocatalytic-thermocatalytic, plasma-thermocatalytic, electrocatalytic-thermocatalytic, and electrocatalytic-electrocatalytic) for converting CO₂ into C₃ oxygenates. The hybrid processes can achieve a net reduction in CO₂ provided that low-carbon energy sources are used, however further catalyst improvements and engineering optimizations are necessary. Hybrid catalytic systems can provide an alternative approach to traditional processes, and these concepts can be extended to other chemical reactions and products, thereby opening new opportunities for innovative CO₂ utilization technologies.
|
27 |
Optimization of the synthesis and performance of Polyaspartamide (PAA) material for carbon dioxide capture in South African coal-fired power plantsChitsiga, Tafara Leonard January 2016 (has links)
A dissertation submitted to the Faculty of Engineering and the Built Environment, University of the Witwatersrand, Johannesburg, in partial fulfilment of the requirements for the degree of Master of Science in Engineering, 2016 / Global climate change is among the major challenges the world is facing today, and can be attributed to enhanced concentrations of Greenhouse Gases (GHG), such as carbon dioxide (CO2), in the atmosphere. Therefore, there is an urgent need to mitigate CO2 emissions, and carbon capture and storage (CCS) is amongst the possible options to reduce CO2 emissions. Against this background, this work investigated the synthesis and performance evaluation of Polyaspartamide (PAA) adsorbent for CO2 capture. In particular, the effect of the presence of water-soluble amines in the amine-grafted poly-succinimide (PSI) (referred to as Polyaspartamide (PAA) adsorbent), was investigated.
Methyl Amine (MA) and Mono-Ethanol Amine (MEA) were employed as water-soluble amines and the effect of changes in their concentration on CO2 adsorption capacity was investigated as well. Water-soluble amines were incorporated to allow water solubility of the adsorbent paving the way for freeze-drying to improve the geometric structure (surface area, pore volume and pore size) of the adsorbent. Initially, the PSI was loaded with Ethylenediamine (EDA), forming PSI-EDA. The water-soluble amines were grafted to PSI-EDA, with the EDA added to improve the chemical surface of the adsorbent for CO2 capture.
NMR and FTIR analyses were performed and confirmed the presence of MA and MEA amine groups in the PAA, thereby indicating the presence of the grafted amines on the backbone polymer. BET analysis was performed and reported the pore volume, pore size and surface area of the freeze-dried material. It was observed that the physical properties did not change significantly after the freeze-drying compared to literature where freeze-drying was not employed. An increase in adsorption capacity with an increase in MA and MEA concentrations in MA-PAA and MEA-PAA samples was observed. At low amine concentrations (20% amine and 80% EDA grafted), MEA-PAA was observed to exhibit higher adsorption capacity compared to the MA-PAA samples. At high amine (100% amine grafted) concentrations, MA-PAA samples displayed higher adsorption capacity. Three runs were performed on each sample and the results obtained were reproducible. The best adsorption capacity obtained was 44.5 g CO2/kg Ads.
Further work was then performed to understand the effects of operating variables on CO2 adsorption as well as the interactive effect using the Response Surface Methodology approach. The experiments were done by use of CO2 adsorption equipment attached to an ABB gas analyzer. A central composite design of experiment method with a total of 20 experiments was employed to investigate three factors, namely, temperature, pressure and gas flow rate. Six regression models were drawn up and mean error values computed by use of Matlab, followed by response surfaces as well as contours, showing the influence of the operating variables on the adsorption capacity as well as interaction of the factors were then drawn up.
The results obtained displayed that each of the factors investigated, temperature, pressure and gas flowrate had an incremental effect on the adsorption capacity of PAA, that is, as each factor was increased, the adsorption capacity increased up to a point where no more increase occurred. Adsorption was seen to increase for both an increase in gas flowrate and adsorption pressure to a maximum, thereafter it starts to decrease. A similar trend was observed for the interaction between temperature and pressure. However, the interaction between gas flowrate and temperature was such that, initially as the temperature and the gas flowrate increase, the adsorption capacity increases to a maximum, thereafter, the temperature seizes to have an effect on the adsorption capacity with a combined effect of decreasing temperature and increasing gas flowrate resulting in a further increase in adsorption capacity.
It was confirmed that the operating variables as well as the flow regime have an effect on the CO2 adsorption capacity of the novel material. The highest adsorption capacity was obtained in the pressure range 0.5 bar to 1.7 bar coinciding with the temperature range of 10 oC to 45 oC. The interaction of gas flowrate and adsorption pressure was such that the highest adsorption capacity is in the range 0.8 bar to 1.5 bar which coincides with the gas flowrate range from 35 ml / min to 60 ml / min. In conclusion, the best adsorption capacity of 44.5 g / kg via the TGA and 70.4 g / kg via the CO2 adsorption equipment was obtained from 100 % MA grafted PSI. / GR2016
|
28 |
Growing season carbon dioxide exchange of two contrasting peatland ecosystemsGlenn, Aaron James, University of Lethbridge. Faculty of Arts and Science January 2005 (has links)
The CO2 flux of two peatlands in northern Alberta was examind during the 2004 growing season using eddy covariance measurements of net ecosystem exchange (NEE), chamber measurements of total ecosystem respiration, and empirical models driven by meteorological inputs. The two ecosystems, a poor fen and an extreme-rich fen, differed significantly in plant species composition, leaf area index, aboveground biomass and surface water chemistry. The mean diurnal pattern of NEE at the peak of the season was similar between the sites, however, the extreme-rich fen had a higher photosynthetic and respiratory capacity than the poor fen. Over the 6 month study, the poor fen was shown to accumulate between 2 to 3 times more carbon than the extreme-rich fen despite having a lower photosynthetic capacity. The evergreen nature of the poor fen site allowed for a longer season of net CO2 uptake than the deciduous species that dominated the extreme-rich fen. / xii, 126 leaves : ill. (some col.) ; 29 cm.
|
29 |
Photosynthetic CO2 exchange and spectral vegetation indices of boreal mossesVan Gaalen, Kenneth Eric, University of Lethbridge. Faculty of Arts and Science January 2005 (has links)
Moss dominated ecosystems are an important part of the global terrestrial carbon cycle. Over large areas, remote sensing can be useful to provide an improved understanding of these ecosystems. Two boreal mossess (Pleurozium and Sphagnum) were assessed using remote sensing based spectral vegetation indices for estimating biochemical capacity and photosynthetic efficiency by varying net photosynthesis rate via changes in water content. In the laboratory, changes in the normalized difference vegetation index (NDVI) and chlorophyll index coincided with declining photosynthetic capacity due to desiccation. This effect was more dramatic in Sphagnum. The photochemical reflectance index (PRI) did not vary with changes in CO2 supply as anticipated, possibly due to overriding effects of changing water content. The water band index (WBI) was strongly related to water content but this relationship showed an uncoupling in the field. Bi-directional reflectance measurements indicated what WBI was sensitive to sensor, sun, and moss surface slope angles. / xi, 110 leaves : ill. (some col.) ; 29 cm.
|
30 |
The effect of elevated atmospheric carbon dioxide mixing ratios on the emission of Volatile organic compounds from Corymbia citriodora and Tristaniopsis laurinaCamenzuli, Michelle January 2008 (has links)
Thesis (MSc) -- Macquarie University, Division of Environmental and Life Sciences, Dept. of Chemistry and Biomolecular Sciences, 2008. / Bibliography: p. 120-124. / Introduction -- Environmental factors affecting the emission of biogenic Volatile organic compounds -- Materials and experimental procedures -- Quantification using sold-phase microextraction in a dynamic system: technique development -- The emission profile of Tristaniopsis laurina -- Study of the effect of elevated atmospheric CO₂ levels on the emission of BVOCS from Australian native plants -- Conclusions and future work. / Biogenic Volatile Organic Compounds (BVOCs) emitted by plants can affect the climate and play important roles in the chemistry of the troposphere. As ambient atmospheric carbon dioxide (CO₂) levels are rapidly increasing knowledge of the effect of elevated atmospheric CO₂ on plant BVOC emissions is necessary for the development of global climate models. -- During this study, the effect of elevated atmospheric CO2 mixing ratios on BVOC emissions from Corymbia citriodora (Lemon Scented Gum) and Tristaniopsis laurina (Water Gum) was determined for the first time through the combination of Solid-Phase Microextraction (SPME), Gas Chromatography-Flame Ionisation Detection (GC-FID), Gas Chromatography-Mass Spectrometry (GC-MS) and an environment chamber. For C. citriodora elevated atmospheric CO₂ led to a decrease in the emission rate of α-pinene, β-pinene, eucalyptol, citronellal and β-caryophyllene, however, elevated CO₂ had no effect on the emission rate of citronellol. The emission profile of T. laurina has been determined for the first time. For T. laurina elevated CO₂ led to a decrease in the emission rate of α-pinene but the emission rates of β-pinene, limonene, eucalyptol and citronellol were unaffected. The results obtained in this work confirm that the effect of elevated atmospheric CO₂ on plant BVOC emissions is species-specific. / Mode of access: World Wide Web. / 124 leaves ill. (some col.)
|
Page generated in 0.0779 seconds