Spelling suggestions: "subject:"coaxial"" "subject:"koaxial""
111 |
Systém pro přesné měření elektrické délky koaxiálních kabelů / System for Precise Measurement of Electrical Length of Coaxial CablesPodr, Michal January 2015 (has links)
This thesis describes a study of the measuring methods determining the electrical length of coaxial cable without using a vector network analyzer. First, a general theory of management and its various parameters is briefly discussed. This section is focused more specifically on the coaxial cable and its parameters. The next part is graphically analyzed process considerations in the design of measurement methods and outlined the block structure of the system. The third section describes the working process, prototype testing of the bridge, its measurement and design of the measuring system. In the fourth part the software is described. In conclusion, the results of the work are discussed, accuracy of the measurement system, the obtained parameters chosen with regard to the principle of the measurement system and the overall evaluation of the applicability in practice.
|
112 |
Development of a coaxial composite fiber / Développement de filaments composites coaxiauxAfzal, Muhammad Ali 17 November 2016 (has links)
Les filaments composites cœur/peau ont été développés dans le but de proposer des capteurs et de effecteurs textiles pour des applications « smart textiles ». Le filage des filaments a été effectué avec une technique de type extrudeuse à piston. Le travail a porté sur la modification d’une machine de filage par fusion, de la caractérisation de polymères, de la caractérisation des filaments développés et de l’optimisation des techniques d’obtention des filaments. La conception du procédé ainsi que son optimisation ont été effectués avec du PET. La modification de la machine a consisté à concevoir les filières, modifier le piston et à introduire un canal d’alimentation sous forme de tube en inox pour sécuriser le passage du filament métallique d’âme dans le four. Ainsi, 10 filières différentes et trois pistons ont été conçus en se fondant sur les règles industrielles puis leurs performances ont été optimisées. Les polymères ont été caractérisés par DSC, par rhéologie et par techniques analytiques. Ces résultats ont montré la forte influence de la température en particulier une forte réduction de la cristallinité du filament composite. L’optimisation des paramètres d’extrusion a pris en compte la vitesse du piston, la vitesse de bobinage, les modifications de la machine dont le nombre de trous des filières, la position du tube dans la filière, les dimensions internes du tube, le diamètre de sortie de la filière. Il a été montré que la conception de la filière a une influence significative sur la forme des filaments obtenus ainsi que sur la concentricité de l’âme. Les propriétés physiques, morphologiques, tribologiques et mécaniques des filaments ont été mesurés. Ainsi, les filaments ont des diamètres compris entre 350 et 500 µm et peuvent être de formes elliptique, triangulaire, rectangulaire ou circulaire et les meilleures propriétés mécaniques sont obtenues avec les filaments le plus réguliers tandis que les filaments irréguliers présentent un coefficient de frottement plus important. Les résultats concernant la rigidité en flexion se sont avérés peu fiables. A partir des paramètres optimisés, un filament composite de polymère ferroélectrique (PVDF 70%-TrFE 30%) avec une âme cuivre a été filé et a montré de parfaites caractéristiques de forme et de concentricité. Ce filament composite peut maintenant être utilisé pour développer des capteurs et des effecteurs, des transmetteurs de signaux, des boucliers électromagnétiques et de l’électronique intégrable dans les vêtements. / A coaxial composite fiber has been developed for the intended application in textile based sensors, actuators and eletric signal transmissions in wearable textile products. The work focuses on melt extrusion machine modification, characterization of polymers, characterization of developed filaments and optimization techniques for obtaining required results. Melt extrusion machine has been used having piston based mechanism. The process design and optimization was done using polyester polymer. The machine modification includes design of spinnert, piston end modification and introduction of separate feeding channel for core filament in the oven. A number of 10 spinnerets designs were developed according to industrial die design rules and optimized for their performance. The piston end designs developed were 3 in number. A stainless steel tube has been introduced into the oven for a separate secure passage of core filament. The polymer characterization was done by thermal, rheological and analytical techniques. The obtained results exhibited thermal attibutes of the polymer and showed reduction in degree of crystallanity in composite filament. The optimization of extrusion parameters including piston speed, winding speed ; and modifications in machine which includes design parameters of number of holes, tube position, tube internal diameter and spinneret exit diameter were done. It was observed that design parameters have significant effect on cross-sectional shape, eccentricity of core and morphology of filament. The characterization of composite filament has been carried out by physical, morphological, mechanical, tribology and bending techniques. The composite filaments developed were in range of 350-500 µm diameter. The filaments developed have elliptical, triangular, rectangular and circular shapes. The regular filaments showed higher tenacity and breaking strength than irregular shaped filaments. The frictional coefficient values were found higher for irregular shapes. Bending stiffness results obtained were not reliable for irregular cross-sectional shapes. The optimized parameters wers used to develop composite filament using ferroelectric polymer (PVDF-TrFE) having 70 :30 ratio copolymer. The developed filament was very regular in shape with good eccentricity of core. The developed Cu/PVDF-TrFE core/sheath filament can be used for development of sensors and actuators. The Cu/Polyester core/sheath filament can be used for electrical signal transmission lines in wearable electronic textiles and for development of electromagnetic shielding effectiveness fabrics.
|
113 |
Řízené uvolňování autologních růstových faktorů s využitím nanovláknových nosičů / Nanofibrous scaffolds in controlled delivery of autologous growth factorsBuzgo, Matej January 2010 (has links)
Platelet preparations are a source of various autologous growth factors and have numerous applications in tissues engineering. The aim of this work was to development electrospun nanofiber scaffolds with platelet preparations. Scaffolds based on the adhesion of platelets on nanofiber meshes were developed. The scaffolds were able to enhance chondrocyte proliferation in vitro. The main disadvantage of this system is the burst release of growth factors immediately after adhesion. To overcome this, we developed coaxially electrospun scaffolds with incorporated alpha granules. Alpha granules are novel platelet preparations with high amounts of growth factors. This system was able to stimulate chondrocyte proliferation and maintain TGF- 1 concentrations for 7 days. Additionally, a novel drug delivery system with coaxially incorporated liposomes was developed. Liposomes incorporated into nanofibers remain intact and can be used for the delivery of various molecules. The ability to maintain HRP activity was compared to systems based on coaxial electrospinning with liposomes, coaxial electrospinning without liposomes and blend electrospinning. When compared to other systems, coaxial electrospinning with liposomes preserves enzyme activity twice as long. These results clearly indicate the potential of...
|
114 |
Scalable 1D and 2D polymer-based nanoparticles via crystallization-driven self-assemblyEllis, Charlotte Emily 21 April 2022 (has links)
Self-assembly is ubiquitous in nature. A diverse range of materials with exceptional properties are accessed from a limited number of sub-units, through controlling structural order on all length-scales. Achieving the same level of control to access functional materials akin to those in nature is a key challenge in chemistry. Self-assembly of block copolymers (BCPs) offers a valuable bottom-up route, governed by non-covalent interactions, to access ordered assemblies on the nanoscale. Anisotropic nanostructures, such as one- and two-dimensional (1D and 2D) micelle morphologies, are of particular interest for various applications including those in biomedicine, catalysis, optoelectronics, and materials engineering. Crystallization-driven self-assembly (CDSA) of BCPs containing a crystallizable core-forming segment presents a robust route to preparing 1D and 2D micelles. Significantly, the use of pre-existing seed micelles in a process termed living CDSA allows access to 1D and 2D nanostructures of controlled size and low size-dispersity. Although CDSA protocols represent powerful tools for the formation controlled 1D and 2D nanostructures, key challenges associated with scale-up of these processes remain. In most cases, increasing the concentration at which living CDSA is performed results in competitive self-nucleation, compromising micelle size-control and dispersity. Living polymerization-induced crystallization-driven self-assembly (PI-CDSA) has been presented as a promising alternative route to accessing scalable 1D micelles. In this case, the polymerization, self-assembly, and seeded growth of a BCP containing a crystallizable core-forming segment occur in situ. However, the scope of living PI-CDSA is currently limited to the use of polyferrocenylsilane (PFS)-based BCPs. Owing to the diverse range of crystalline core chemistries compatible with CDSA protocols, and therefore various promising applications of 1D and 2D micelles, scale-up is essential to facilitate their further investigation and application. The work presented in this thesis focusses on upscaling the preparation and processing of controlled 1D and 2D micelles with a crystalline core. The scalable preparation of low dispersity 2D platelet micelles by living CDSA of a charge-terminated PFS homopolymer with surfactant counteranions is presented in Chapter 2. Here, fundamental insight into the effects of living CDSA concentration on platelet dimensions, structure fidelity, and aggregation behaviour is provided. In Chapter 3, the scope of living PI-CDSA is extended to access scalable length-controlled low dispersity 1D nanofibers containing a biodegradable poly(fluorenetrimethylenecarbonate) (PFTMC) crystalline core. PFTMC-based 1D fibers are of interest for biomedical applications, hence, in this work, it is demonstrated that living PI-CDSA can be used to prepare fibers exhibiting biologically-relevant lengths at scalable concentrations. In Chapter 4, the scalable formation of low dispersity 1D micelles by living CDSA of a PFS-based BCP in a continuous flow setup is explored. Processing of 1D micelles into microfibers using simple, low cost, and high throughput electrospinning techniques is demonstrated in Chapter 5. Finally, Chapter 6 summarises the contribution of this thesis to improving the scalability of CDSA protocols and provides future directions for this work. / Graduate / 2023-04-12
|
115 |
Réalisation et caractérisation de dispositifs de mesure associés à la détermination de la constante de von Klitzing à partir d’un condensateur calculable étalon dit de Thompson-Lampard / Realization and characterization of the measurement devices associated to the determination of the von Klitzing constant from a standard calculable capacitor said Thompson-LampardSindjui, Ralph 01 July 2016 (has links)
Le sujet de thèse s'inscrit dans le cadre d'un nouveau projet de détermination de la constante de von Klitzing débuté depuis quelques années au LNE et dont l'aboutissement est prévu pour 2018. A ce jour, la mesure la plus exacte de cette constante traçable au Système International d’unités (SI) est obtenue via le raccordement de l'ohm produit par l'effet Hall quantique au farad, matérialisé à l'aide d'un condensateur calculable dit de Thompson-Lampard. Afin d'améliorer sa précédente détermination délivrée en 2000 avec une incertitude relative de 5.10-8,le LNE a décidé de construire un nouvel étalon calculable de Thompson-Lampard (déjà en cours de développement) et d'améliorer l'exactitude de l'ensemble des dispositifs de mesure associés avec pour objectif de réduire l’incertitude globale sur cette détermination à une valeur proche de 10-8. Le travail de thèse porte sur la réalisation, la caractérisation et/ou l’automatisation de la chaîne de mesure associée à cette détermination. / The comparison of electrical quantities expressed in units of the International System of Units (SI) and the same quantities generated from quantum effects is a direct way of determining physical constants. The determination of the von Klitzing constant (quantum of resistance) from a calculable capacitor is a part of this process. The last determination of this constant was conducted at LNE in 2000 with an uncertainty of 5.10-8. To achieve a target uncertainty of 1.10-8, the LNE decided to build a new standard capacitor and improve the associated measurement chain. The work presented here is implemented in the framework of the design/amelioration and the characterization of the measurement chain leading to the relative uncertainty of 1.10-8. Exploratory studies were also conducted about the possible partial or full automation of elements of the measurement chain.
|
116 |
Forecasting Codeword Errors in Networks with Machine Learning / Prognostisering av kodordsfel i nätverk med maskininlärningHansson Svan, Angus January 2023 (has links)
With an increasing demand for rapid high-capacity internet, the telecommunication industry is constantly driven to explore and develop new technologies to ensure stable and reliable networks. To provide a competitive internet service in this growing market, proactive detection and prevention of disturbances are key elements for an operator. Therefore, analyzing network traffic for forecasting disturbances is a well-researched area. This study explores the advantages and drawbacks of implementing a long short-term memory model for forecasting codeword errors in a hybrid fiber-coaxial network. Also, the impact of using multivariate and univariate data for training the model is explored. The performance of the long short-term memory model is compared with a multilayer perceptron model. Analysis of the results shows that the long short-term model, in the vast majority of the tests, performs better than the multilayer perceptron model. This result aligns with the hypothesis, that the long short-term memory model’s ability to handle sequential data would be superior to the multilayer perceptron. However, the difference in performance between the models varies significantly based on the characteristics of the used data set. On the set with heavy fluctuations in the sequential data, the long short-term memory model performs on average 44% better. When training the models on data sets with longer sequences of similar values and with less volatile fluctuations, the results are much more alike. The long short-term model still achieves a lower error on most tests, but the difference is never larger than 7%. If a low error is the sole criterion, the long short-term model is the overall superior model. However, in a production environment, factors such as data storage capacity and model complexity should be taken into consideration. When training the models on multivariate and univariate datasets, the results are unambiguous. When training on all three features, ratios of uncorrectable and correctable codewords, and signal-to-noise ratio, the models always perform better. That is, compared to using uncorrectable codewords as the only training data. This aligns with the hypothesis, which is based on the know-how of hybrid fiber-coaxial experts, that correctable codewords and signal-to-noise ratio have an impact on the occurrence of uncorrectable codewords. / På grund av den ökade efterfrågan av högkvalitativt internet, så drivs telekomindustrin till att konsekvent utforska och utveckla nya teknologier som kan säkerställa stabila och pålitliga nätverk. För att kunna erbjuda konkurrenskraftiga internettjänster, måste operatörerna kunna förutse och förhindra störningar i nätverken. Därför är forskningen kring hur man analyserar och förutser störningar i ett nätverk ett väl exploaterat område. Denna studie undersökte för- och nackdelar med att använda en long short-term memory (LSTM) för att förutse kodordsfel i ett hybridfiber-koaxialt nätverk. Utöver detta undersöktes även hur multidimensionell träningsdata påverkade prestandan. I jämförelsesyfte användes en multilayer perceptron (MLP) och dess resultat. Analysen av resultaten visade att LSTM-modellen presterade bättre än MLP-modellen i majoriteten av de utförda testerna. Men skillnaden i prestanda varierade kraftigt, beroende på vilken datauppsättning som användes vid träning och testning av modellerna. Slutsatsen av detta är att i denna studie så är LSTM den bästa modellen, men att det inte går att säga att LSTM presterar bättre på en godtycklig datauppsättning. Båda modellerna presterade bättre när de tränades på multidimensionell data. Vidare forskning krävs för att kunna determinera om LSTM är den mest självklara modellen för att förutse kodordsfel i ett hybridfiber-koaxialt nätverk.
|
117 |
Transient Voltage Distribution in BushingKhan, Md Nazmus Shakib January 2020 (has links)
An electrical bushing is one of the most important elements in a power transformer. Steep front surges such as transient impulse voltage from lightning strikes is an inevitable electromagnetic transient mostly happening in power transmission and distribution system. The bushing might lead to be degraded due to such kind of surge. This project deals with overvoltage stress distribution on the transformer bushing under the effect of electromagnetic transient response such as lightning impulse. To understand the behavior of transient response on the bushing, a proper model of power transformer bushing is built-in Comsol multiphysics to authenticate the stress distribution. The electromagnetic wave of impulse propagates onto the overhead line that connects with the transformer. Some understanding of the transient behavior of a conductor bushing has been achieved through studying the influence of inductance property and the skin effect characteristics of a multi-layer coaxial cable on the wave propagation, which has been structured in this project to simplify the model. On the other hand, the skin effect analysis on the conductor of the bushing has been taken also into account in this project using real conductor simulation in the Comsol model. Thus, it will be interesting to compare the real conductor model with the perfect conductor of the bushing through analyzing the current density effect on it. In this project, multi-layer of coaxial cable and transformer bushing are simulated. The simulation is carried out for time domain and frequency domain in Comsol based on the model characteristics. / En elektrisk genomföring är ett av de viktigaste elementen i en transformator. Spänningsvågor med branta fronter som impulsspänningar från blixtnedslag är ett oundvikligt elektromagnetiskt övergående fenomen som oftast sker i kraftöverförings- och distributionssystem. Genomföringen kan leda till att degraderas på grund av en sådan våg. Detta projekt handlar om fördelning av överspännings på transformatorgenomföringen under påverkan av elektromagnetisk transient respons, såsom blixtimpuls. För att förstå beteendet hos övergående respons på genomföringen är en korrekt modell av transformatorgenomföring inbyggd Comsol-flerfysik för att autentisera spänningsfördelningen. Den elektromagnetiska impulsvågen fortplantas från luftledningen som ansluter till transformatorn. Viss förståelse för det övergående beteendet hos en ledargenomföring har uppnåtts genom att studera påverkan av induktansegenskaper och hudeffektegenskaperna hos en flerskikts koaxialkabel på vågutbredningen, vilket har strukturerats i detta projekt för att förenkla modellen. Å andra sidan har hudeffektanalysen på genomföringens ledare beaktats i detta projekt med användning av verklig ledarsimulering i Comsol-modellen. Således blir det intressant att jämföra den riktiga ledarmodellen med den perfekta ledaren för genomföringen genom att analysera strömtäthetseffekten på den. I detta projekt simuleras flerskikt av koaxialkabel och transformatorgenomföring. Simuleringen utförs för tidsdomän och frekvensdomän i Comsol baserat på modellegenskaperna.
|
118 |
Glide-symmetric Holey EBG Filter Using Multiple Unit Cell DesignsEliasson, Gustav, Åkerstedt, Lucas January 2021 (has links)
There are more connected wireless devices than everbefore and with the rise of new smart systems such as self-drivingcars and smart cities new antenna solutions for transmittingsignals are needed. One important part of these systems is thefilters which filter out all the unwanted signals. In this report,we present a solution for manufacturing such a filter with apassband from 26-29 GHz and a stopband from 29-60 GHz usinga fully metallic glide-symmetric structure. Ideas of combiningmultiple unit cell designs to achieve wider stopbands and higherattenuation are explored using dispersion engineering wherethe advantages and the disadvantages of using this method arepresented. Furthermore, ways of combining the filter to standardconnections using a coaxial cable to waveguide transition areproposed and designed. The usage of multiple unit cell designsis proven to be a solution for achieving wider stopbands withminimum coupling between modes. / Det finns fler trådlösa enheter uppkoppladeän n°agonsin tidigare och med ökningen av nya smarta systemsom självkörande bilar och smarta städer finns ett behov av nyaantennlösningar för överföring av information. En viktig del avdessa system är filtren som filtrerar bort alla oönskade signaler.I denna rapport presenterar vi en lösning för att konstrueraett sådant filter med ett passband från 26-29 GHz och ettstoppband från 29-60 GHz med en helt metallisk glidsymmetriskstruktur. Id´eer att kombinera flera enhetscellsdesigner för attuppnå bredare stoppband och högre attenuering undersöks medhjälp av dispersionsteknik, där fördelarna och nackdelarna medatt använda denna metod presenteras. Dessutom föreslås ochutformas sätt att kombinera filtret till standardanslutningar meden koaxialkabel till vågledarövergång. Användningen av fleraenhetscell designer visar sig vara en lösning för att skapa bredastoppband med minimal koppling mellan ”modes”. / Kandidatexjobb i elektroteknik 2021, KTH, Stockholm
|
119 |
Core–shell bioprinting of vascularized in vitro liver sinusoid modelsTaymour, Rania, Chicaiza-Cabezas, Nathaly Alejandra, Gelinsky, Michael, Lode, Anja 18 April 2024 (has links)
In vitro liver models allow the investigation of the cell behavior in disease conditions or in response to changes in the microenvironment. A major challenge in liver tissue engineering is to mimic the tissue-level complexity: besides the selection of suitable biomaterial(s) replacing the extracellular matrix (ECM) and cell sources, the three-dimensional (3D) microarchitecture defined by the fabrication method is a critical factor to achieve functional constructs. In this study, coaxial extrusion-based 3D bioprinting has been applied to develop a liver sinusoid-like model that consists of a core compartment containing pre-vascular structures and a shell compartment containing hepatocytes. The shell ink was composed of alginate and methylcellulose (algMC), dissolved in human fresh frozen plasma. The algMC blend conferred high printing fidelity and stability to the core–shell constructs and the plasma as biologically active component enhanced viability and supported cluster formation and biomarker expression of HepG2 embedded in the shell. For the core, a natural ECM-like ink based on angiogenesis-supporting collagen-fibrin (CF) matrices was developed; the addition of gelatin (G) enabled 3D printing in combination with the plasma-algMC shell ink. Human endothelial cells, laden in the CFG core ink together with human fibroblasts as supportive cells, formed a pre-vascular network in the core in the absence and presence of HepG2 in the shell. The cellular interactions occurring in the triple culture model enhanced the albumin secretion. In conclusion, core–shell bioprinting was shown to be a valuable tool to study cell–cell-interactions and to develop complex tissue-like models.
|
120 |
Aplicación de microondas en el tratamiento de emulsiones del tipo agua en aceite (w/o) y aceite en agua (o/w)Pérez Páez, Rocío 02 April 2009 (has links)
Las emulsiones del tipo agua en aceite (w/o) y aceite en agua (o/w) están compuestas por una mezcla de aceite, agua, lodo y otros agentes. Se pueden encontrar en el proceso y/o en los vertidos de diferentes tipos de industrias, tales como refinerías de petróleo, plantas procesadoras de aceite de consumo, industrias farmacéuticas, industrias de alimentos, etc.
El calentamiento de un material a una frecuencia de microondas depende de la frecuencia de la onda electromagnética y de las propiedades dieléctricas, así como de la acumulación de energía interna que va ligada a la profundidad de penetración del campo dentro del material. De este modo, el conocimiento preciso de las propiedades dieléctricas de los materiales es fundamental para conocer su comportamiento bajo la influencia de un campo electromagnético.
El objetivo general de esta tesis es proponer métodos alternativos basados en la tecnología de microondas para monitorizar, caracterizar y/o separar emulsiones.
Para ello, se determinaron los protocolos de preparación de emulsiones prototipo en el laboratorio, empleando dos fases distintas (ácido oleico y aceite mineral SAE 40), de composición similar a las encontradas en la industria.
Paralelamente se ha seleccionado, montando y calibrando un sistema de medida de propiedades dieléctricas en un rango de frecuencias de 1 a 4 GHz (rango cercano a la frecuencia estándar de calentamiento f =2.45 GHz) y de esta manera se ha obtenido un amplio espectro de información del comportamiento dieléctrico de las emulsiones, que servirán para diseñar en una fase posterior aplicadores de microondas.
En base a este estudio preliminar se planteó una experiencia piloto con emulsiones reales presentes en el proceso de extracción de aceite de palma africana, con el fin de determinar el efecto de las microondas en la separación y en la calidad del aceite recuperado. / Pérez Páez, R. (2009). Aplicación de microondas en el tratamiento de emulsiones del tipo agua en aceite (w/o) y aceite en agua (o/w) [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/4328
|
Page generated in 0.0544 seconds