Grâce à leurs remarquables qualités de transport de charges et d’auto-organisation, les cristaux liquides colonnaires formés de molécules discotiques dérivées de colorants aromatiques sont des candidats prometteurs pour la réalisation de dispositifs photovoltaïques. Pour profiter à bien de ces propriétés, il est indispensable de maîtriser leur organisation en films minces. Un ancrage homéotrope avec les colonnes perpendiculaires au substrat est ainsi nécessaire pour conduire efficacement les charges aux électrodes. Cet alignement a été obtenu par transition d’ancrage entre un substrat solide et une cathode d’argent permettant d’obtenir des films ultra-minces (environ 25 nm d’épaisseur) homogènes orientés. Par ailleurs, une bicouche de composés discotiques intégralement alignée en ancrage homéotrope a été élaborée. A notre connaissance, ce travail constitue la première preuve de faisabilité d’une hétérojonction donneur – accepteur orientée constituée de cristaux liquides colonnaires. / Columnar liquid crystals made of discotic molecules derived from aromatic dyes are promising materials for the realization of photovoltaic devices thanks to their high charge mobility and their capacity to self-organize. In order to benefit from their anisotropic properties, it is necessary to control their organization in thin films. For example, a homeotropic anchoring where the columns are perpendicular to the substrate is required to carry the charges efficiently to the electrodes. Homogeneous homeotropically oriented ultra-thin films (approximately 25 nm) have been obtained by an anchoring transition between a solid substrate and a silver cathode. Moreover, a homeotropically oriented bilayer formed by discotic compounds has been achieved. This represents the first proof of principle of an organic heterojunction based on two oriented columnar liquid crystal layers.

Gegenstand der vorliegenden Arbeit ist die Herstellung und Charakterisierung neuer sternförmiger Mesogene. Bei den aufgeführten Sternverbindungen, handelt es sich um Oligobenzoate, bestehend aus aromatischen Hydroxy- oder Aminocarbonsäuren, die durch Kupplungsreaktionen mit Dicylohexycarbodiimid, in einer konvergenten Synthesestrategie verknüpft wurden. Das besondere Augenmerk der Arbeit richtete sich auf die Charakterisierung der von den neuen Substanzen gebildeten Mesophasen, die mit Hilfe von Polarisationsmikrokopie, dynamischer Differenzialkalorimetrie und Röntgenstreuung erfolgte. Zur Aufklärung spezieller dreidimensionaler Strukturen wurden als zusätzliche Methoden die Rasterkraftmikroskopie angewandt und der Zirkulardichroismus untersucht.

Liquid crystalline materials forming columnar mesophases are of importance for both the fundamental research and technological applications due to their supramolecular architecture allowing for one-dimensional charge transport. The potential applications of these materials include light emitting diodes, solar cells, field effect transistors and photovoltaic cells. However, to design a LC material suitable for a particular application, a fundamental understanding of the structure-property relationships is needed.<p>In the present thesis, a variety of systems forming columnar mesophases have been explored. They include small molecular weight compounds (triphenylene, phthalocyanine derivatives and star-shaped mesogens) and polymer materials. The research was focused on the study of the influence of the molecular architecture and specific interactions such as hydrogen bonding on the supramolecular organization in the mesophase, as well as on the influence of columnar mesophase on crystal growth. The main results of the thesis are summarized below.<p>The influence of hydrogen bonding on the structure and charge carrier mobility was investigated for a triphenylene derivative, hexaazatriphenylene, having lateral alkyl chains linked to the core via amide groups. These linking groups provide the possibility to form inter- and intra-molecular hydrogen bonds. Acting as “clamps”, the inter-molecular hydrogen bonds are found to enforce the attractive interactions between the molecules in the column. Thus, the columnar mesophase formed by this system is characterized by the smallest inter-disk distance ever found in columnar mesophases (3.18 Å). The improved intra-columnar order brings about a higher charge carrier mobility (0.02 cm2/Vs) as compared to other triphenylene derivatives without hydrogen bonds. <p>Phthalocyanine derivatives, which are liquid crystalline at ambient temperature, could be suitable for opto-electronic applications due to their improved processibility and self-healing of structural defects. Our interest in these systems was inspired by the fact that, in spite of numerous studies performed to date, only very a few phthalocyanine derivatives were found to exhibit columnar mesophases at ambient temperature. We observed that by introducing branches in alkyl chains close to the core, we were able to render the material LC at ambient temperature. Analysis of X-ray diffraction patterns measured on oriented samples showed that these systems form hexagonal and rectangular ordered columnar mesophases. This finding is in contradiction with the general view stating that non-hexagonal mesophases can be only disordered. Since the absolute majority of applications require fabrication of films, it was very important to achieve the visualization of the organization of the phthalocyanine derivatives at the nanometer scale. AFM images on thick spin-coated films with columnar resolution are presented for the first time. They allowed the examination of columnar curvatures and breaks at the boundaries between different single crystal-like domains. <p>The possibility of templating columnar crystal growth was studied for a star-shaped mesogen using a combination of direct- and reciprocal-space techniques. AFM images with columnar resolution showed that the crystal growth initiated in the monotropic columnar mesophase occurs almost in register with the mesomorphic template. In the final crystalline structure, the placement of the crystalline columns is controlled by the mesomorphic tracks at the scale of an individual column, i.e. at the scale of approximately 3.5 nm. <p>The mesophase-assisted crystallization was also studied for the case of a polymer material forming columnar mesophase, poly(di-n-propylsiloxane). X-ray diffraction on oriented fibers allowed us to correct the previous indexation and solve the structure of the unit cell. The crystallization process was studied on samples crystallized in different conditions. It was found that, depending on crystallization conditions, both folded-chain and extended-chain crystals can be obtained. Thus, crystallization of the material from the mesophase results in the formation of 100-150nm thick crystals, which corresponds to a nearly extended-chain conformation. By contrast, when crystallized from a dilute solution, folded-chain crystals result. The mechanisms of chain unfolding was studied by variable temperature atomic force microscopy on PDPS single crystals. It was found that crystals rapidly thicken above the initial melting point, up to 80 nm. / Doctorat en sciences, Spécialisation physique / info:eu-repo/semantics/nonPublished

Cette thèse est consacrée à l’étude de films minces ouverts de cristaux liquides colonnaires sur un substrat solide. Ces matériaux, capables de s’auto-organiser en de larges domaines orientés, sont généralement obtenus à partir de molécules discotiques dérivées de colorants aromatiques. Ces différentes caractéristiques, associées à une bonne mobilité de charges, permettent d'envisager l'utilisation des cristaux liquides colonnaires en film mince dans des dispositifs photovoltaïques. Afin de bénéficier de leurs bonnes propriétés optoélectroniques, les cristaux liquides colonnaires doivent être déposés en film mouillant, d’épaisseur inférieure à 100 nm, et leur orientation contrôlée. Ainsi, pour des applications photovoltaïques, un alignement homéotrope (colonnes normales au substrat) est requis. Inversement, l’orientation planaire uniaxe (colonnes parallèles au substrat), est quant à elle requise pour une utilisation de ces composés dans les polariseurs ou dans les transistors organiques à effet de champ. Dans ce travail, différentes méthodes permettant de contrôler l’alignement de films minces ouverts de cristaux liquides colonnaires ont été développées, permettant d’obtenir aussi bien un ancrage homéotrope par traitement thermique spécifique, qu’un ancrage planaire uniaxe par dépôt préalable d’une couche de téflon. Le contrôle de l’orientation a ainsi permis d’une part de produire un film mince (e ? 50 nm) mouillant en ancrage homéotrope ouvrant la voie vers des cellules solaires organiques efficaces, et d’autre part de déterminer l’ensemble des propriétés optiques (indices complexes anisotropes) de ces matériaux cristallins liquides colonnaires. La dynamique du démouillage et l’état d’équilibre d’un film mince ouvert de cristal liquide colonnaire ont également été étudiés. Les résultats expérimentaux révèlent la formation de gouttelettes anisotropes et la présence d’un film nanométrique lors du démouillage de ce film mince / This thesis deals with columnar liquid crystal studied in the geometry of open supported thin films. Columnar liquid crystals are usually made of disk-shaped molecules derived from aromatic dyes. They are efficient charge transporters with the added capacity to self-assemble in large oriented domains. Consequently, such materials may be used in photovoltaic devices. In order to benefit from their good uniaxial charge mobility, their organization has to be controlled in uniform oriented thin films in the range of thicknesses of typically 100 nm. Homeotropic alignment (columns normal to the interface) is required for solar cells whereas uniaxial planar anchoring (columns parallel to the interface) is needed for applications such as polarizers or organic field effect transistor. Different methods to monitor the alignment in open thin films have been developed in this work, which make possible to achieve either homeotropic anchoring by a specific thermal treatment, or uniaxial planar orientation using a Teflon layer. Based on these orientation skills, a uniform ultra-thin film, free of dewetting and homeotropically oriented, is achieved (down to 50 nm thick) opening the way towards efficient solar cells, and a complete study of the optical properties has been performed (with the determination of the anisotropic complex indices) for different columnar liquid crystals. The dynamics of dewetting and the equilibrium state of a thin supported film have also been investigated. Experimental results show the formation of anisotropic droplets and reveal a nanometric film during dewetting.

Many usability features designed in software applications are not procedurally intuitive for software users. A good example of software usability involves tabular sorting in a spreadsheet. Single-column sorting, activated with a mouse click to a column header or toolbar button, often produces rearranged listings that reduce cognitive organization beyond the sorted column. Multi-column sorting, generated through menu-driven processes, provides derived organization, however, locating feature options through menu-based systems can be confusing. A means to overcome this confusion is prioritized selection of database arrays issued to columnar displays for the purpose of intact transposition of data. This is a unique process designed as a user-centric tabular multi-column sorting interface. Designed within this experimental software application is a "trickle down" logic perceived as a navigation rule. The design offers logic associated with decision choices as used to pursue a software solution. The solution in this instance is a compiled resultant of separate and distinct columnar data sorting. The design was initially implemented in a software application housing thousands of examination scores. Observations of the design concept's effectiveness in practice led to further investigation through this master's thesis. To validate the research design, research participants were introduced to an example of traditional database sort/selection with practice examples. These users were also provided sorting exercises to reinforce the discussed concepts--both experimental and traditional. Finally, a survey questionnaire allowed them to provide feedback about the different task methods for sorting as well as the experience of using these dissimilar methods. The hypothesis was not validated through the research survey. Consideration of observations of the design in a production environment for four years, however, provided impetus to suggest further research of the design concept.

No description available.

No description available.

Gegenstand der vorliegenden Arbeit ist die Herstellung und Charakterisierung neuer sternförmiger Mesogene. Bei den aufgeführten Sternverbindungen, handelt es sich um Oligobenzoate, bestehend aus aromatischen Hydroxy- oder Aminocarbonsäuren, die durch Kupplungsreaktionen mit Dicylohexycarbodiimid, in einer konvergenten Synthesestrategie verknüpft wurden. Das besondere Augenmerk der Arbeit richtete sich auf die Charakterisierung der von den neuen Substanzen gebildeten Mesophasen, die mit Hilfe von Polarisationsmikrokopie, dynamischer Differenzialkalorimetrie und Röntgenstreuung erfolgte. Zur Aufklärung spezieller dreidimensionaler Strukturen wurden als zusätzliche Methoden die Rasterkraftmikroskopie angewandt und der Zirkulardichroismus untersucht.

Additive Manufacturing (AM) is an innovative manufacturing process which offers near-net shape fabrication of complex components, directly from CAD models, without dies or substantial machining, resulting in a reduction in lead-time, waste, and cost. For example, the buy-to-fly ratio for a titanium component machined from forged billet is typically 10-20:1 compared to 5-7:1 when manufactured by AM. However, the production rates for most AM processes are relatively slow and AM is consequently largely of interest to the aerospace, automotive and biomedical industries. In addition, the solidification conditions in AM with the Ti alloy commonly lead to undesirable coarse columnar primary β grain structures in components. The present research is focused on developing a fundamental understanding of the influence of the processing conditions on microstructure and texture evolution and their resulting effect on the mechanical properties during additive manufacturing with a Ti6Al4V alloy, using three different techniques, namely; 1) Selective laser melting (SLM) process, 2) Electron beam selective melting (EBSM) process and, 3) Wire arc additive manufacturing (WAAM) process. The most important finding in this work was that all the AM processes produced columnar β-grain structures which grow by epitaxial re-growth up through each melted layer. By thermal modelling using TS4D (Thermal Simulation in 4 Dimensions), it has been shown that the melt pool size increased and the cooling rate decreased from SLM to EBSM and to the WAAM process. The prior β grain size also increased with melt pool size from a finer size in the SLM to a moderate size in EBSM and to huge grains in WAAM that can be seen by eye. However, despite the large difference in power density between the processes, they all had similar G/R (thermal gradient/growth rate) ratios, which were predicted to lie in the columnar growth region in the solidification diagram. The EBSM process showed a pronounced local heterogeneity in the microstructure in local transition areas, when there was a change in geometry; for e.g. change in wall thickness, thin to thick capping section, cross-over’s, V-transitions, etc. By reconstruction of the high temperature β microstructure, it has been shown that all the AM platforms showed primary columnar β grains with a <001>β.