Orientadores: Varese Salvador Timóteo, Francisco José Arnold / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Tecnologia / Made available in DSpace on 2018-08-24T09:10:01Z (GMT). No. of bitstreams: 1 CesarioJunior_JoseMaria_M.pdf: 2596300 bytes, checksum: 6b11eb547957a0632bbc647946da04ce (MD5) Previous issue date: 2014 / Resumo: A crescente evolução mundial dos sistemas de medição inteligentes, a liberação de regulamentações Brasileiras, incentivando a adoção de sistemas de medição de energia elétrica inteligentes, direcionaram a presente dissertação a propor um sistema composto de um equipamento eletrônico para medição, em tempo real, das grandezas de corrente, tensão e calcular a energia consumida e terá canais de comunicação com as tecnologias Wi-Fi, GSM/GPRS e GPS. As informações sobre consumo serão disponibilizadas para os usuários finais com o objetivo de mudar o padrão de consumo de energia elétrica, ou até reduzi-lo, através da conscientização e disponibilização das informações de consumo em tempo real / Abstract: The growing worldwide trend of smart metering systems, the release of Brazilian regulations, encouraging the adoption of smart electricity metering systems, guided this dissertation to propose a system composed of an electronic device for measuring, in real time, the magnitudes of current, voltage and calculate the consumed power and will have communication channels based on Wi-Fi, GSM /GPRS and GPS technologies. The consumption information will be made available to end users with the goal of changing the electricity consumption pattern, or even reduce it, through awareness and provision of consumer information in real time / Mestrado / Tecnologia e Inovação / Mestre em Tecnologia

The work explores ways to generate the OFDM signal and LDPC channel coding methods. Describes the creation of basic modules of the communication system in Matlab and simulation methods for atmospheric transmission environment, including effects of turbulence, attenuation along the route and weather conditions on the transmitted signal.

The thesis deals with the setting of functional communication using the Picture Exchange Communication System method at people with autism spectrum disorder through individual levels of education and is divided into the theoretical and the practical part. The key terms explaining the problematic of autism, significance of communication and education of people with autism spectrum disorder introduces the theoretical part which is split into a few areas. The main overarching is the Picture Exchange Communications System methods which compensates the disorder in communication of an individual with autism spectrum disorder either temporarily or permanently. Furthermore, based on the interviews with participants in the educational process, the thesis analyzes the application of the method and cooperation of the individual educational institutions but also parents. In the empirical part are the interviews complemented by the case study which completes the whole picture of research problem in question. The output of the thesis are recommendations compared with the results of the conducted research. The area of education of individuals with autism spectrum disorder is one of the most difficult pedagogical disciplines regarding to attention, individual approach, environment modification and at the same time...

<p><em>Imbulgoda Liyangahawatte, Gihan Janith Mendis Ph.D., Purdue University, May</em></p> <p><em>2023. Deep learning for securing critical infrastructure with the emphasis on power</em></p> <p><em>systems and wireless communication. Major Professor: Dr. Jin Kocsis.</em></p> <p><br></p> <p><em>Critical infrastructures, such as power systems and communication</em></p> <p><em>infrastructures, are of paramount importance to the welfare and prosperity of</em></p> <p><em>modern societies. Therefore, critical infrastructures have a high vulnerability to</em></p> <p><em>attacks from adverse parties. Subsequent to the advancement of cyber technologies,</em></p> <p><em>such as information technology, embedded systems, high-speed connectivity, and</em></p> <p><em>real-time data processing, the physical processes of critical infrastructures are often</em></p> <p><em>monitored and controlled through cyber systems. Therefore, modern critical</em></p> <p><em>infrastructures are often viewed as cyber-physical systems (CPSs). Incorporating</em></p> <p><em>cyber elements into physical processes increases efficiency and control. However, it</em></p> <p><em>also increases the vulnerability of the systems to potential cybersecurity threats. In</em></p> <p><em>addition to cyber-level attacks, attacks on the cyber-physical interface, such as the</em></p> <p><em>corruption of sensing data to manipulate physical operations, can exploit</em></p> <p><em>vulnerabilities in CPSs. Research on data-driven security methods for such attacks,</em></p> <p><em>focusing on applications related to electrical power and wireless communication</em></p> <p><em>critical infrastructure CPSs, are presented in this dissertation. As security methods</em></p> <p><em>for electrical power systems, deep learning approaches were proposed to detect</em></p> <p><em>adversarial sensor signals targeting smart grids and more electric aircraft.</em></p> <p><em>Considering the security of wireless communication systems, deep learning solutions</em></p> <p><em>were proposed as an intelligent spectrum sensing approach and as a primary user</em></p> <p><em>emulation (PUE) attacks detection method on the wideband spectrum. The recent</em></p> <p><em>abundance of micro-UASs can enable the use of weaponized micro-UASs to conduct</em></p> <p><em>physical attacks on critical infrastructures. As a solution for this, the radio</em></p> <p><em>frequency (RF) signal-analyzing deep learning method developed for spectrum</em></p> <p><em>sensing was adopted to realize an intelligent radar system for micro-UAS detection.</em></p> <p><em>This intelligent radar can be used to provide protection against micro-UAS-based</em></p> <p><em>physical attacks on critical infrastructures.</em></p>

Ultra-wideband (UWB) communication technology offers inherent advantages such as the ability to coexist with previously allocated Federal Communications Commission (FCC) frequencies, simple transceiver architecture, and high performance in noisy environments. Spread spectrum techniques offer additional improvements beyond the conventional pulse-based UWB communications. This dissertation implements a multiple-access UWB communication system using a surface acoustic wave (SAW) correlator receiver with orthogonal frequency coding and software defined radio (SDR) base station transmitter. Orthogonal frequency coding (OFC) and pseudorandom noise (PN) coding provide a means for spreading of the UWB data. The use of orthogonal frequency coding (OFC) increases the correlator processing gain (PG) beyond that of code division multiple access (CDMA); providing added code diversity, improved pulse ambiguity, and superior performance in noisy environments. Use of SAW correlators reduces the complexity and power requirements of the receiver architecture by eliminating many of the components needed and reducing the signal processing and timing requirements necessary for digital matched filtering of the complex spreading signal. The OFC receiver correlator code sequence is hard-coded in the device due to the physical SAW implementation. The use of modern SDR forms a dynamic base station architecture which is able to programmatically generate a digitally modulated transmit signal. An embedded Xilinx Zynq ™ system on chip (SoC) technology was used to implement the SDR system; taking advantage of recent advances in digital-to-analog converter (DAC) sampling rates. SDR waveform samples are generated in baseband in-phase and quadrature (I & Q) pairs and upconverted to a 491.52 MHz operational frequency. The development of the OFC SAW correlator ultimately used in the receiver is presented along with a variety of advanced SAW correlator device embodiments. Each SAW correlator device was fabricated on lithium niobate (LiNbO3) with fractional bandwidths in excess of 20%. The SAW correlator device presented for use in system was implemented with a center frequency of 491.52 MHz; matching SDR transmit frequency. Parasitic electromagnetic feedthrough becomes problematic in the packaged SAW correlator after packaging and fixturing due to the wide bandwidths and high operational frequency. The techniques for reduction of parasitic feedthrough are discussed with before and after results showing approximately 10:1 improvement. Correlation and demodulation results are presented using the SAW correlator receiver under operation in an UWB communication system. Bipolar phase shift keying (BPSK) techniques demonstrate OFC modulation and demodulation for a test binary bit sequence. Matched OFC code reception is compared to a mismatched, or cross-correlated, sequence after correlation and demodulation. Finally, the signal-to-noise power ratio (SNR) performance results for the SAW correlator under corruption of a wideband noise source are presented.

[ES] La comunicación organizacional como un componente empresarial ha cobrado mayor relevancia en la estructura de los activos intangibles que dispone una entidad, pero la realidad es que aún son muchas las instituciones que desaprovechan el potencial de esta herramienta corporativa y más si pertenecen al sector público de una nación. La Universidad de Guayaquil no es ajena a esta realidad por lo que permanentemente presenta escenarios de desinformación e incertidumbre; así también el ruido es una constante en su ciclo comunicacional. Es por lo antes mencionado que este estudio doctoral tiene la finalidad de proponer un modelo de comunicación interna para instituciones públicas de educación superior (IES) adaptable a las necesidades de esta organización para que sean superados todos estos espacios negativos que le afectan. Para alcanzar el objetivo de esta trabajo académico se empleó una metodología mixta bajo un enfoque descriptivo y no experimental que permitió recolectar datos del personal docente, el personal administrativo y los estudiantes de esta institución para plantear un modelo de comunicación institucional funcional para la Universidad de Guayaquil y adaptable a otras IES, acompañado de un manual de comunicación interna que ayude a normar el sistema comunicacional que se desarrolla actualmente dentro del alma mater más grande del Ecuador. / [CA] La comunicació organitzacional com un component empresarial ha cobrat major rellevància en l'estructura dels actius intangibles que disposa una entitat, però la realitat és que encara són moltes les institucions que desaprofiten el potencial d'aquesta eina corporativa i més si pertanyen al sector públic d'una nació. La Universitat de *Guayaquil no és aliena a aquesta realitat pel que permanentment presenta escenaris de desinformació i incertesa; així també el soroll és una constant en el seu cicle comunicacional. És per l'abans esmentat que aquest estudi doctoral té la finalitat de proposar un model de comunicació interna per a institucions públiques d'educació superior (IES) adaptable a les necessitats d'aquesta organització perquè siguen superats tots aquests espais negatius que l'afecten. Per a aconseguir l'objectiu d'aquesta treball acadèmic es va emprar una metodologia mixta sota un enfocament descriptiu i no experimental que va permetre recol·letar dades del personal docent, el personal administratiu i els estudiants d'aquesta institució per a plantejar un model de comunicació institucional funcional per a la Universitat de *Guayaquil i adaptable a altres IES, acompanyat d'un manual de comunicació interna que ajude a *normar el sistema comunicacional que es desenvolupa actualment dins de l'alma mater més gran de l'Equador. / [EN] Organizational communication as a business component has become more relevant in the structure of intangible assets available to an entity, but the reality is that there are still many institutions that do not take advantage of the potential of this corporate tool, especially if they belong to the public sector of a nation. The University of Guayaquil is no stranger to this reality, which is why it permanently presents scenarios of misinformation and uncertainty; noise is also a constant in its communication cycle. It is for this reason that this doctoral study aims to propose a model of internal communication for public institutions of higher education (IES) adaptable to the needs of this organization to overcome all these negative spaces that affect it. To achieve the objective of this academic work, a mixed methodology was used under a descriptive and non-experimental approach that allowed collecting data from faculty, administrative staff and students of this institution to propose a functional institutional communication model for the University of Guayaquil and adaptable to other IES, accompanied by an internal communication manual that helps to regulate the communication system that is currently developed within the largest alma mater of Ecuador. / Pacheco Rodriguez, MG. (2022). Modelo de comunicación interna para instituciones públicas de educación superior. Caso Universidad de Guayaquil [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/186119

Dans ces travaux de thèse, nous proposons un système de communication original permettant d’atteindre un haut débit et de répondre aux exigences de la qualité de service requise pour les communications courte portée dans le cadre du transport intelligent. Ce système se base sur la technologie Ultra Large Bande Impulsionnelle (IR-ULB) et sur un nouveau schéma de modulation nommé M-OAM (M-Orthogonal Amplitude Modulation). Les modulations M-OAM se basent sur le principe des modulations M-QAM en remplaçant les porteuses par des formes d’ondes ULB orthogonales de type MGF (Modified Gegenbauer Function). Ces modulations ont été évaluées sous les conditions d’un canal AWGN et des canaux IEEE 802.15.3a et IEEE 802.15.4a qui tiennent compte des paramètres réels de la route. En plus du haut débit exigé par les communications inter-véhiculaires, il faut assurer un échange d’informations simultané entre plusieurs utilisateurs de la route et garantir une bonne qualité de service. Dans cette optique, une nouvelle technique d’accès multiple adaptée est proposée. Chaque utilisateur a la possibilité d’utiliser la modulation OAM adéquate selon le débit désiré. Le récepteur de ce système se caractérise par un aspect intelligent grâce à l’intégration des principes de la Radio Cognitive (RC) qui permet de détecter l’arrivée du signal et d’identifier les paramètres de la modulation utilisée afin de s’y adapter d’une façon autonome. Une bonne qualité de service est assurée par la proposition d’une nouvelle technique de démodulation qui se base sur les Statistiques d’Ordres Supérieurs (SOS) permettant d’éliminer le bruit Gaussien. Les bonnes performances du système de communication M-OAM ainsi que l’ensemble des aspects proposés ont été validés expérimentalement au sein du laboratoire IEMN-DOAE. Dans la dernière partie de ce document nous avons présenté la réalisation d’un prototype de ce traitement en temps réel sur une plateforme FPGA, en exploitant des algorithmes parallélisables sur des architectures reconfigurables. / In this work of thesis, we propose an original communication system allowing to reach high data rate and to fulfill the requirements of quality of service necessary for the communications short range dedicated to intelligent transport. This system is based on the Ultra Wide Band Impulse (IR-ULB) technology and on new modulation scheme named M-OAM (M-states Orthogonal Amplitude Modulation). M-OAM modulations are based on the principle of modulations M-QAM by replacingthe carriers used for QAM modulation with orthogonal waveforms ULB type MGF (Modified Gegenbauer Function). These modulations were evaluated under the conditions of AWGN channel and IEEE 802.15 channels which take account of the real parameters of the road. Besides the high speed required by inter-vehicular communications, it is necessary to ensure simultaneous information exchange between several users of the road. Accordingly, new adaptive multiple access system is proposed. Each user has the possibility to use the adequate modulation OAM according to the desired speed. The receiver of this system is characterized by an intelligent aspect thanks to the integration of the principle of Cognitive Radio (RC) which makes it able to detect the signal arrival and to identify the parameters of the used modulation in order to adapt the demodulation in an autonomous way. A good quality of service is ensured by the proposed novel demodulation method based on the Higher Orders Statistics (HOS) to eliminate the Gaussian noise. The good performances of M-OAM communication system M-OAM as well as the whole of the suggested aspects are validated in experiments within IEMN-DOAE laboratory. In the last part of this document we presented the realization of prototype using real time processing developed on FPGA plateform and exploiting parallelisable algorithms on reconfigurable architectures.

El món de les comunicacions per la xarxa elèctrica (CXE) pot ser dividit en tres grans tipus: CXE en baix voltatge (CXE-BV), en mig voltatge (CXE-MV) i en alt voltatge (CXE-AV). En aquests últims anys, les CXE-BV han atret una gran expectació, ja que les seves capacitats han fet d'aquesta tecnologia una bona opció com alternativa pel bucle local d'accés i pel desplegament de xarxes d'àrea local, focalitzades aquestes últimes en l'entorn domèstic. A més, les CXE-BV inclouen un conjunt d'aplicacions de baixa velocitat orientades a l'operador, com la lectura automàtica de comptadors (LAC), distribució de càrrega, facturació dinàmica, etc. Per altra banda, les CXE-MV i CXE-AV, històricament lligades a tasques de telecontrol i teleprotecció, s'estan començant a considerar com un canal de comunicacions eficient i fiable. El desenvolupament de sistemes digitals i els esforços d'estandardització estan fent d'aquests canals un medi atractiu per a que els operadors elèctrics ofereixin serveis de comunicacions, ja que no necessiten invertir en infraestructura perquè la xarxa elèctrica ja està desplegada.En aquesta Tesi s'introduiran i es comentaran les particularitats de les tres xarxes elèctriques, després, es mostraran al lector les solucions tecnològiques existents pels canals de BV basats en la norma Europea CENELEC així com pels canals d'AV, mostrant que els sistemes actuals de LAC ofereixen una diversitat freqüencial molt baixa i que els mòdems CXE-AV estan ancorats en estendards antiquats.Aquest treball es mou per les tres topologies de la xarxa, particularment, en aplicacions orientades a la banda CENELEC, en mesura i modelat de canal, i en mesura i disseny del nivell físic per sistemes CXE-BV, CXE-MV i CXE-AV respectivament. Els sistemes actuals que exploten la banda CENELEC ofereixen mecanismes d'explotació de la diversitat freqüencial del canal molt limitats o nuls, donant lloc a una baixa robustesa en front a interferències i soroll de fons acolorit. Aquest treball proposa un esquema de modulació multiportadora que, mantenint una complexitat baixa, ofereix unes altes prestacions permetent un bon nivell d'explotació de la selectivitat freqüencial. Per al que a CXE-MV respecta, aquesta Tesi desenvolupa un model de canal determinístic-estadístic pels anells urbans de distribució de potència i, finalment, en sistemes CXE-AV, aquest treball proposa, basat en mesures de canal i proves de camp, un nivell físic de banda ampla capaç de incrementar la velocitat de comunicació mentre manté una baixa densitat espectral de potència limitant així la interferència a altres sistemes.PARAULES CLAU: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters. / El mundo de las comunicaciones por la red eléctrica (CRE) puede ser dividido en tres grandes tipos: CRE en bajo voltaje (CRE-BV), en medio voltaje (CRE-MV) y en alto voltaje (CRE-AV). En estos últimos años, las CRE-BV han atraído una gran expectación, ya que sus capacidades han hecho de esta tecnología una buena opción como alternativa para el bucle local de acceso y para el despliegue de redes de área local, focalizadas estas últimas en el entorno doméstico. Además, las CRE-BV incluyen un conjunto de aplicaciones de baja velocidad orientadas al operador como la lectura automática de contadores (LAC), distribución de carga, facturación dinámica, etc. Por otro lado, las CRE-MV y CRE-AV, históricamente ligadas a tareas de telecontrol y teleprotección, se están empezando a considerar como un canal de comunicaciones eficiente y fiable. El desarrollo de sistemas digitales y los esfuerzos de estandarización están haciendo de estos canales un medio atractivo para que los operadores eléctricos ofrezcan servicios de comunicaciones, ya que no necesitan invertir en infraestructura porque la red eléctrica ya está desplegada.En esta Tesis se introducirán y se comentarán las particularidades de las tres redes eléctricas, luego, se mostrarán al lector las soluciones tecnológicas existentes para los canales de BV basados en la norma Europea CENELEC así como para los canales de AV, mostrando que los sistemas actuales de LAC ofrecen una diversidad frecuencial muy baja y que los módems CRE-AV están anclados en estándares anticuados.Este trabajo se mueve por las tres topologías de red, particularmente, en aplicaciones orientadas a la banda CENELEC, en medida y modelado de canal, y en medida y diseño del nivel físico para sistemas CRE-BV, CRE-MV y CRE-AV respectivamente. Los sistemas actuales que explotan la banda CENELEC ofrecen mecanismos de explotación de la diversidad frecuencial del canal muy limitados o nulos, dando lugar a una escasa robustez frente a interferencias y ruido de fondo coloreado. Este trabajo propone un esquema de modulación multiportadora que, manteniendo una complejidad baja, ofrece unas altas prestaciones permitiendo un buen nivel de explotación de la selectividad frecuencial. Por lo que a CRE-MV respecta, esta Tesis desarrolla un modelo de canal determinístico-estadístico para los anillos urbanos de distribución de potencia y, finalmente, en sistemas de CRE-AV, este trabajo propone, basado en medidas de canal y pruebas de campo, un nivel físico de banda ancha capaz de incrementar la velocidad de comunicación mientras mantiene una baja densidad espectral de potencia limitando así la interferencia a otros sistemas.PALABRAS CLAVE: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters. / The world of Power line communications (PLC) can be divided into three main types: low voltage PLC (LV-PLC), medium voltage PLC (MV-PLC) and high voltage PLC (HV-PLC). These last years, LV-PLC has attracted a great expectation since its wideband capabilities has made this technology a suitable choice for last-mile access and in-home communications. Moreover, LV-PLC also includes a utility oriented low frequency and low speed applications, such as automatic meter reading (AMR), load distribution, dynamic billing and so on. On the other hand, MV-PLC and HV-PLC, historically oriented to teleprotection and telecontrol tasks, are being considered as a reliable communication channel. The development of digital equipment and the standardization efforts are making those channels an attractive medium for electrical utilities telecommunications services, since the network, as well as in LV-PLC, is already deployed. In this PhD dissertation, the three different PLC topologies are reviewed and the different communications techniques in such channels exposed. Then, a deep technological review of existing AMR solutions for the European CENELEC band, as well as HV-PLC systems is given, showing that existing AMR systems deliver low frequency diversity and HV-PLC systems are anchored in old fashioned standards.This work walks around the three topologies, specifically, CENELEC band utility oriented applications, channel measurement and modeling and channel measurement and physical layer design, regarding LV-PLC, MV-PLC and HV-PLC respectively. Existing CENELEC compliant systems deliver low or none frequency diversity mechanisms, yielding in a low robustness against colored noise and interference. This work propose a multicarrier based physical layer approach that, while keeping the complexity low, delivers high performance allowing a great level of frequency diversity. Focusing on MV-PLC, a hybrid deterministic-statistical channel model for urban underground rings is developed and, finally, in HV-PLC systems, this work proposes, based on measurements and field tests, a wideband physical layer in order to increase data rate while keeping low both the power spectral density and possible interference to other systems.KEYWORDS: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters.

Multi-antenna wireless communication systems that employ a large number of antennas have recently stirred a lot of research interest. This is mainly due to the possibility of achieving very high spectral efficiency, power efficiency, and link reliability in such large-scale multiple-input multiple-output (MIMO) systems. An emerging architecture for large-scale multiuser MIMO communications is one where each base station (BS) is equipped with a large number of antennas (tens to hundreds of antennas) and the user terminals are equipped with fewer antennas (one to four antennas) each. The backhaul communication between base stations is also carried out using large number of antennas. Because of the high dimensionality of large-scale MIMO signals, the computational complexity of various transceiver operations can be prohibitively large. Therefore, low complexity techniques that scale well for transceiver signal processing in such large-scale MIMO systems are crucial. The transceiver operations of interest include signal encoding at the transmitter, and channel estimation, detection and decoding at the receiver. This thesis focuses on the design and analysis of novel low-complexity transceiver signal processing schemes for large-scale MIMO systems. In this thesis, we consider two types of large-scale MIMO systems, namely, massive MIMO systems and generalized spatial modulation MIMO (GSM-MIMO) systems. In massive MIMO, the mapping of information bits to modulation symbols is done using conventional modulation alphabets (e.g., QAM, PSK). In GSM-MIMO, few of the avail-able transmit antennas are activated in a given channel use, and information bits are conveyed through the indices of these active antennas, in addition to the bits conveyed through conventional modulation symbols. We also propose a novel modulation scheme named as precoder index modulation, where information bits are conveyed through the index of the chosen precoder matrix as well as the modulation symbols transmitted. Massive MIMO: In this part of the thesis, we propose a novel MIMO receiver which exploits channel hardening that occurs in large-scale MIMO channels. Channel hardening refers to the phenomenon where the off-diagonal terms of HH H become much weaker compared to the diagonal terms as the size of the channel gain matrix H increases. We exploit this phenomenon to devise a low-complexity channel estimation scheme and a message passing algorithm for signal detection at the BS receiver in massive MIMO systems. We refer to the proposed receiver as the channel hardening-exploiting message passing (CHEMP) receiver. The key novelties in the proposed CHEMP receiver are: (i) operation on the matched filtered system model, (ii) Gaussian approximation on the off-diagonal terms of the HH H matrix, and (iii) direct estimation of HH H instead of H and use of this estimate of HH H for detection The performance and complexity results show that the proposed CHEMP receiver achieves near-optimal performance in large-scale MIMO systems at complexities less than those of linear receivers like minimum mean squared error (MMSE) receiver. We also present a log-likelihood ratio (LLR) analysis that provides an analytical reasoning for this better performance of the CHEMP receiver. Further, the proposed message passing based detection algorithm enables us to combine it with low density parity check (LDPC) decoder to formulate a joint message passing based detector-decoder. For this joint detector-decoder, we design optimized irregular binary LDPC codes specific to the massive MIMO channel and the proposed receiver through EXIT chart matching. The LDPC codes thus obtained are shown to achieve improved coded bit error rate (BER) performance compared to off-the-shelf irregular LDPC codes. The performance of the CHEMP receiver degrades when the system loading factor (ratio of the number of users to the number of BS antennas) and the modulation alpha-bet size are large. It is of interest to devise receiver algorithms that work well for high system loading factors and modulation alphabet sizes. For this purpose, we propose a low-complexity factor-graph based vector message passing algorithm for signal detection. This algorithm uses a scalar Gaussian approximation of interference on the basic sys-tem model. The performance results show that this algorithm performs well for large modulation alphabets and high loading factors. We combine this detection algorithm with a non-binary LDPC decoder to obtain a joint detector-decoder, where the field size of the non-binary LDPC code is same as the size of the modulation alphabet. For this joint message passing based detector-decoder, we design optimized non-binary irregular LDPC codes tailored to the massive MIMO channel and the proposed detector. GSM-MIMO: In this part of the thesis, we consider GSM-MIMO systems in point-to-point as well as multiuser communication settings. GSM-MIMO has the advantage of requiring only fewer transmit radio frequency (RF) chains than the number of transmit antennas. We analyze the capacity of point-to-point GSM-MIMO, and obtain lower and upper bounds on the GSM-MIMO system capacity. We also derive an upper bound on the BER performance of maximum likelihood detection in GSM-MIMO systems. This bound is shown to be tight at moderate to high signal-to-noise ratios. When the number of transmit and receive antennas are large, the complexity of en-coding and decoding of GSM-MIMO signals can be prohibitively high. To alleviate this problem, we propose a low complexity GSM-MIMO encoding technique that utilizes com-binatorial number system for bits-to-symbol mapping. We also propose a novel layered message passing (LaMP) algorithm for decoding GSM-MIMO signals. Low computational complexity is achieved in the LaMP algorithm by detecting the modulation bits and the antenna index bits in two deferent layers. We then consider large-scale multiuser GSM-MIMO systems, where multiple users employ GSM at their transmitters to communicate with a BS having a large number of receive antennas. For this system, we develop computationally efficient message passing algorithms for signal detection using vector Gaussian approximation of interference. The performance results of these algorithms show that the GSM-MIMO system outperforms the massive MIMO system by several dBs for the same spectral efficiency. Precoder index modulation: It is known that the performance of a communication link can be enhanced by exploiting time diversity without reducing the rate of transmission using pseudo random phase preceding (PRPP). In order to further improve the performance of GSM-MIMO, we apply PRPP technique to GSM-MIMO systems. PRPP provides additional diversity advantage at the receiver and further improves the performance of GSM-MIMO systems. For PRPP-GSM systems, we propose methods to simultaneously precode both the antenna index bits and the modulation symbols using rectangular precoder matrices. Finally, we extend the idea of index modulation to pre-coding and propose a new modulation scheme referred to as precoder index modulation (PIM). In PIM, information bits are conveyed through the index of a prehared PRPP matrix, in addition to the information bits conveyed through the modulation symbols. PIM is shown to increase the achieved spectral efficiency, in addition to providing diver-sity advantages.

The doctoral thesis deals with spectrum sensing and subsequent use of the frequency spectrum by multicarrier communication system, which parameters are set on the basis of the optimization technique. Adaptation settings can be made with respect to several requirements as well as state and occupancy of individual communication channels. The system, which is characterized above is often referred as cognitive radio. Equipments operating on cognitive radio principles will be widely used in the near future, because of frequency spectrum limitation. One of the main contributions of the work is the novel usage of the Kolmogorov – Smirnov statistical test as an alternative detection of primary user signal presence. The new fitness function for Particle Swarm Optimization (PSO) has been introduced and the Error Vector Magnitude (EVM) parameter has been used in the adaptive greedy algorithm and PSO optimization. The dissertation thesis also incorporates information about the reliability of the frequency spectrum sensing in the modified greedy algorithm. The proposed methods are verified by the simulations and the frequency domain energy detection is implemented on the development board with FPGA.