Detta examensarbete syftar till att utveckla ett nytt sätt att använda betong för inredningsändamål. Betong har alltid använts i större byggnader, infrastruktur och andra kategorier. Nyligen började den moderna inredningen använda betong inomhus, till exempel som bänkskiva eller som en hylla. Arbetet fokuserar på en huvudfråga: Är betong ett bra materialval för inredning? För att besvara denna fråga bestämdes några punkter för att komma till huvudfrågan. Följande punkter behövde testat och analyserad för att komma till svaren:    - Beräkna och testa betongens hållfasthet    - Testa slagtålighet    - Analysera hur betong reagerar med kemikalier med olika pH-värde    - Förhållandet mellan miljö och betong    - Studera produktionen av betong Laborationstest, litteraturskällor och fältstudier användes som metoder för att få ett resultat av ovan nämnda punkter. Resultaten visar att betong kan användas som inredningsändamål och kan användas i större utsträckning än vad som är fallet idag. Sammanfattningsvis är betong ett bra material som används för inredningsändamål och den framtida tekniken kommer att minska koldioxidutsläppen som följer med produktionen av betongen. Det kommer att göra betong ännu bättre som material att använda i framtiden. / The following thesis aims to develop a new way to use concrete as interior material. Concrete has always been used in larger scale buildings, infrastructure and in other categories. Recently the modern interior design started to use concrete indoors for example as countertop or as a shelf. This thesis focuses on one main question: is concrete a good material choice for interior use. To answer that question, we decided to have sub questions to help to get to the main question. The following questions needed test and analysis methods to get to the answers:    - Calculate and test the strength of concrete    - Test impact resistance    - Analyze how concrete reacts with chemicals with different PH-values    - Study the production of concrete    - Relation between environment and concrete Lab tests, literature sources, and field studies was used as methods to answer those questions. The results shows that concrete can be utilized as interior material and can be used to a greater extent than is the case today. In conclusion concrete is a good material as used for interior purposes and the future technology will decrease carbon dioxide emissions that comes with production of the concrete. That will make concrete even better as material to use in the future.

Cette contribution, en s’appuyant sur expérimentation et modélisation numérique vise à une meilleure compréhension du comportement des dalles en béton armé sous sollicitations de cisaillement. Une campagne expérimentale a été réalisée sur des dalles épaisses à pleine échelle de centrales nucléaires. Ces dalles sans armatures d’effort tranchant sont soumises à une sollicitation de cisaillement en chargement quasi-statique. Les essais sont réalisés en faisant varier différents paramètres qui peuvent influencer le comportement au cisaillement. Sont ainsi étudiés : résistance en compression du béton, épaisseur, taux d’armatures longitudinales et transversales, taille des granulats, longueur de la plaque de chargement. L’influence des efforts de membrane, de compression ou de traction, sur le comportement au cisaillement a également été analysée. Les résultats des essais sont ensuite comparés aux prédictions des codes de calcul. Ces résultats ont d’abord permis d’apporter une réponse aux divergences qui existent entre l’Eurocode 2 et l’Annexe Nationale Française quant à la prédiction du cisaillement. Ont également été évalués le niveau de précision donné par d’autres normes de dimensionnement au cisaillement: la norme américaine ACI 318-14, le code nucléaire AFCEN ETC-C 2010, le fib-Model Code 2010 et l’approche par la théorie de la fissure critique de cisaillement CSCT. Ensuite est évalué la possibilité d’analyses non-linéaire par élément finis (EF) pour reproduire le phénomène du cisaillement dans les dalles. Un modèle de béton élastoplastique avec endommagement est combiné à une analyse quasi-statique à schéma de résolution explicite. Des lois de comportement non linéaires appropriées du béton avec des comportements post-pic associés à un critère énergétique ont été considérées. La bonne concordance entre le modèle proposé et les résultats expérimentaux en termes de résistance au cisaillement et de modes de rupture permet de valider la modélisation proposée. Une étude paramétrique a été réalisée sur la base du modèle proposé avec les mêmes propriétés mécaniques de béton. Des lois simplifiées permettant d’estimer les capacités en cisaillement en fonction des différents paramètres étudiés sont finalement proposées. / This study, based on experiments and numerical modeling, aims at a better understanding of the shear behavior of reinforced concrete slabs. An experimental campaign was carried out on full-scale thick slabs typical of nuclear power plant slabs. These slabs without shear reinforcement are subjected to a quasi-static shear loading. The tests are carried out by varying different parameters that can influence the shear behavior: the concrete compressive strength, the slab depth, the bottom longitudinal and transverse reinforcement ratio, the concrete aggregate size, the loading plate length. The influence on shear behavior of compression or tension membrane forces has also been analyzed. The results of tests are then compared with the predictions of the calculation codes. These results first of all helped to answer the differences between the Eurocode 2 and the French National Annex concerning the prediction of the shear capacity of reinforced concrete slabs. The level of accuracy given by other shear dimensioning standards was also assessed: The American standard ACI 318-14, the AFCEN ETC-C 2010 code used for nuclear buildings, the fib-Model 2010 and the Critical Shear Crack Theory. Next, we evaluate the possibilities of a non-linear finite element analysis (EF) to reproduce the phenomenon of shear in slabs. An elastoplastic concrete model with damage was used and combined with a quasi-static analysis using an explicit resolution scheme. Appropriate nonlinear behavior laws of concrete with post-peak behaviors associated with an energy criterion were considered. The good agreement between the proposed model and the experimental results in terms of shear strength and failure modes allowed validating the proposed modeling. A parametric study was conducted based on the numerical proposed model with the same mechanical properties of concrete. Simplified laws allowing estimating the shear capacities according to the different parameters studied are proposed.

Submitted by Luanna Matias (lua_matias@yahoo.com.br) on 2015-03-27T17:05:59Z No. of bitstreams: 2 Dissertação - Marcel Willian Reis Sales - 2014.pdf: 4208639 bytes, checksum: b181bf240488740db8489468fb605743 (MD5) license_rdf: 23148 bytes, checksum: 9da0b6dfac957114c6a7714714b86306 (MD5) / Approved for entry into archive by Luanna Matias (lua_matias@yahoo.com.br) on 2015-03-27T18:54:00Z (GMT) No. of bitstreams: 2 Dissertação - Marcel Willian Reis Sales - 2014.pdf: 4208639 bytes, checksum: b181bf240488740db8489468fb605743 (MD5) license_rdf: 23148 bytes, checksum: 9da0b6dfac957114c6a7714714b86306 (MD5) / Made available in DSpace on 2015-03-27T18:54:00Z (GMT). No. of bitstreams: 2 Dissertação - Marcel Willian Reis Sales - 2014.pdf: 4208639 bytes, checksum: b181bf240488740db8489468fb605743 (MD5) license_rdf: 23148 bytes, checksum: 9da0b6dfac957114c6a7714714b86306 (MD5) Previous issue date: 2014-08-27 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / Composite beams of steel and concrete are studied for some time. The mechanism of transfer of longitudinal shear stresses on the interface between the beam and the slab usually occurs by means of shear connectors. In this case, the set of two materials behavior depends on the strength and rigidity of the connector on the interface, being well known for connectors with pin-type head associated with massive concrete slab. However, there is little information on shear connectors with pin-type head associated with hollowcore slab concrete. This study aims to determine, by means of direct shear tests, the resistance of connectors with pin-type head when associated with cellular slab and precast concrete presence of cover concrete. Hollow core slabs are analyzed with two different heights and concrete cover of 40 mm in thickness. Is also varied the strength of concrete fill and rate of shear reinforcement at the link. The results are compared with normative prescriptions and suggestions for other jobs. At the end, we propose the modification of an expression commonly used to evaluate the resistance of stud bolt and alveolar slab so as to adapt it to the situation of cellular concrete slab with hood. / As vigas mistas de aço e concreto são estudadas há bastante tempo. O mecanismo de transferência de tensões de cisalhamento longitudinais pela interface entre a viga e a laje normalmente se dá por meio de conectores de cisalhamento. Nesse caso, o comportamento conjunto dos dois materiais depende da resistência e da rigidez do conector na interface, sendo bem conhecido para os conectores do tipo pino com cabeça associados com laje maciça de concreto. Entretanto, há pouca informação sobre conectores de cisalhamento do tipo pino com cabeça associados com laje alveolar de concreto pré-moldado. Este trabalho tem por objetivo determinar, por meio de ensaios de cisalhamento direto, a resistência de conectores do tipo pino com cabeça quando associados com laje alveolar de concreto pré-moldado e presença de capa de concreto. São analisadas lajes alveolares com duas alturas diferentes e capa de concreto de 40 mm de espessura. Também é variada a resistência do concreto de preenchimento e a taxa de armadura transversal à ligação. Os resultados são comparados com prescrições normativas e sugestões de outros trabalhos. Ao final, é proposta a modificação de uma expressão normalmente utilizada para avaliar a resistência do conector tipo pino com cabeça e laje alveolar de modo a adequá-la à situação de laje alveolar com capa de concreto.

Syfte: Miljömedvetet och prisvärt byggande har länge varit två uttryck som använts ibyggbranschen. Betong har använts och är väl beprövat. Trä och framförallt KL-trä ärdäremot ett material som växt fram det senaste decenniet. Frågan är, när är det bäst attbygga med de olika materialen och vad är materialens respektive klimatavtryck? Målet med denna rapport är att jämföra två bjälklagssystem, ett i KL-trä och ett i betong, utifrån ett sammanvägt kostnads-, dimensions- och miljöperspektiv och hur de förhåller sig mellan spännvidderna fyra, sex och åtta meter. ▪ Hur stor är den procentuella kostnadsskillnaden mellan dessa bjälklagssystem? ▪ Hur stor är den procentuella skillnaden i koldioxidutsläpp under produktionen avdessa bjälklagssystem ▪ Hur stor är den procentuella dimensionsskillnaden mellan dessa bjälklagssystem? ▪ Vilket bjälklagssystem är det bästa valet utifrån en multikriterieanalys? Metod: Studien består av flera experiment för att få ut empiri till en kvotmätning.Denna metod användes för att få fram primärdata till arbetet.Sekundärdata samlades in via dokumentstudier av lagar och krav för byggnation inombrand, ljud och dimensionering. Resultat: Studien visar resultaten av en jämförelse mellan bjälklagssystem med olikamaterial och spännvidder. En multikriterieanalys används för att rangordna resultatenför att visa det mest fördelaktiga alternativet. Konsekvenser: Vid användning av KL-trä bör dimensionering tas i beaktande dådimensionerna blir relativt stora jämfört med betong. Kostnaden av materialen skiljersig markant. Detta speglar dock inte totalkostnad då produktion, leveranser, montering,etcetera ej är medräknat. Att använda en multikriterieanalys vid jämförelser ger entydlig bild på fördelaktigt alternativ samt hur stor skillnad det är mellan alternativen. Begränsningar: Då det endast är en del i totalkostnaden som berörs speglar interesultatet rättvis kostnadsbild och kan därför inte användas som referenspunkt. Resultatfungerar endast som ett hjälpmedel vid delberäkning av totalkostnad. Nyckelord: Betong, KL-trä, Plattbärlag, Plattbjälklag, Kassettbjälklag,Multikriterieanalys, Dimensionering, Kostnad, Koldioxidutsläpp / Purpose: Environmental and affordable construction has long been two terms used in theconstruction industry. Concrete has been used and is well proven. Wood and especiallyCLT wood, on the other hand, is a material that has emerged in the last decade. The questionis, when is it best to build with the different materials and what are their respective climatefootprints? The aim of this report is to compare two structural floor systems, one in CLT wood and onein concrete, based on a balanced cost, dimension and environmental perspective and howthey relate between the spans of four, six and eight meters. ▪ What is the percentage cost difference between these structural floor systems? ▪ What is the percentage difference in carbon dioxide emissions during theproduction of these structural floor systems? ▪ What is the percentage dimensional difference between these structural floorsystems? ▪ Which structural floor system is the best choice based on a multi-criteria decisionanalysis? Method: The study consists of several experiments to obtain empirical data for a quotameasurement. This method was used to obtain primary data for the work. To obtain secondary data consisting of standards, calculation models and requirements, adocument study was used. Secondary data were collected via document studies of laws and requirements forconstruction in fire, acoustics and dimensioning. Findings: The study shows the results of a comparison between structural floor systemswith different materials and spans. A multi-criteria decision analysis is used to rank theresults to show the most advantageous alternative. Implications: When using CLT-wood, dimensioning should be taken into account as thedimensions will be relatively large compared to concrete. The cost of the materials differsmarkedly. However, this does not reflect the total cost as production, deliveries, assembly,etcetera are not included. Using a multi-criteria decision analysis in comparisons gives aclear picture of a favorable alternative and how large a difference there is between thealternatives. Limitations: As only a part of the total cost is affected, the result does not reflect a faircost picture and can therefore not be used as a reference point. The results only serve as anaid in the partial calculation of total cost. Keywords: Concrete, CLT-wood, Prefabricated Concrete Slab Joist, CLT Flat Joist,Rib Elements, Multi-Criteria Decision Analysis, Cost, Carbon Dioxide Emissions

The subject of the master’s thesis is static design and assessment of the static load-bearing steel structure. The structure is designed for the site Brno. Specifically this is an eight-storey office building with a 54 x 12 m floor plan and a total height is 30,2 m. The steel structure is lovated betwrrn teo reinforced concrete towers secure for vertical transport. The structure is designed in three variants. In the one of them a steel frame with hingee attached elements. The ceiling structure is designed as composite steel and concrete structure.

The project deals with the modernization of the agricultural building which leads to a change of the using building. In an effort was to make use of the building which goes to into ruin and to create jobs in this location. The building is located on the plot no. 212 on the north of outskirts of Opatovice I.. In the area there is a cowshed and a silage trough. The former cowshed will be rebuilt into a woodworking facility constituted by manufacturing and administrative part. The silage trough will be used as a waste stock. A new outdoor wood store will be built in the northwest part of the plot. The administrative building will be added to the main building with a basement made from permanent formwork. The ground floor and the first floor are made of clay bricks and reinforced concrete cross-reinforced slab 150 mm thick. The internal partitions in the 1st floor are made of clay block prartitions 115 mm thick. The internal partitions in the 2nd floor are plasterboard 100 mm thick. Rebuilding involves a large number of demolition work for example new openings in existing walls. The whole woodworking facility will be insulated by a certified thermal insulation system 100 mm thick on the production part and 180 mm thick on the administrative part. The object is covered with saddle roof shaped letter "T" with a sheet metal cover. The original hard landscaping will be replaced by an asphalt road.

The diploma thesis is focused on the design of structural support and construction modifications of a baroque wine cellar, which is part of a double-storeyed house. The first part deals with the statical analysis and structural support of a masonry barrel vault, which was loaded with a new building. The second part deals with the reconstruction of the double-storeyed object, which is in a state of disrepair with heavily developed cracks. The thesis contains a technical report, analysis of statics, drawing documentation and the work progress. The calculation of internal forces were executed by the software Scia Engineer 2017. The drawing documentation contains a formwork and reinforcement drawing, maping of cracks, leading of tensions in the walls and vault including of floor plans, sections and elevations, production plans of base plates and deviators, reinforcement drawing of concrete bond beam and finally the construction process of upper construction.

The Thesis deals with a proposal for a new mixed-used building in the city of Moravske Budejovice in the cadastral area of Moravske Budejovice. The building is a three-floored house without a cellar. The roof of the house is completely flattened. On the first floor, there are commercial rooms, hairdresser´s and a bookshop. Apartments are on the second and third floor. The construction will be built of clay blocks which are 300 mm wide. The insulation of the building is formed by thermal insulation composite system. The ceiling is created by reinforced concrete slabs 250 mm wide. Parts of the documentation are water-supply, electricity, pipeline and waste water pipe. The description of pavement and driveway is included. The Thesis is written as a project to build the construction.

The subject of my diploma thesis is the design of the pension with the possibility of wellness activities, which is located in the village of Holásky, on the level of documentation for the construction. The new building is located in the cadastral area Holásky. It is a three-storey, basement building in the shape of two bounce rectangles with separate parking for visitors to the pension and wellness. The supporting system consists of a reinforced concrete skeletal column system with a ceiling structure made of Spiroll core panels. Porotherm ceramic blocks with contact insulated facade according to ETICS are used for filling masonry. The roof structure is a single-skin flat roof.

The subject of the diploma thesis is technical part of the project documentation for the new accomodation facility in the city of Znojmo in the cadastral area of Znojmo. The building is a three-storey, partly basement. The roof of the house is build as a flat roof. The building is created of clay blocks and permanent formwork. The ceilings are made by reinforced concrete slabs. The object is situated on a flat terrain. On the first floor, there is a main entrance, a reception, a dining room, a kitchen, atechnical facilities for the stuff, storage areas. On the basement, there is a technical background of the building. Rooms for guests are located on the first and second floor.