The design of chromophores targets materials with optoelectronic properties necessary for advanced applications. Organic materials possess properties which emerge from the collective impact of the constituent backbone and substituents as well as their connectivity (i.e. molecular architecture), necessitating the exploration of novel conjugated architectures. This thesis chronicles our examination of 1,4-distyryl-2,5-bis(arylethynyl)benzenes (cruciforms, XFs). Electronic substitution of this 'X-shaped' cross-conjugated scaffold tunes both the energy levels and the spatial distribution of the frontier molecular orbitals (FMOs) in XFs. The resulting fluorophores exhibit FMO separation, imbuing XFs with desirable properties for sensory applications. Using model analytes, we examine how the underlying FMO arrangement and the nature of analyte interaction elicit observable responses. These studies provide a foundation for future access of functional responsive ratiometric cores. This case study demonstrates the importance and unique potential of FMO-separated fluorophores.

The literature on nanomaterials has been flooded with new shapes, sizes, and compositions of nanostructures. The process of developing and characterizing these particles has been broadly accomplished and many interesting and promising properties have been revealed for application in current and developing technologies. In particular, the phenomenon of surface plasmon resonance seen in metallic gold and silver nanoparticles has drawn substantial interest. It has been established that the electromagnetic fields surrounding plasmonic particle surfaces can influence the properties of nearby systems, causing them to experience effects such as enhanced absorption and emission of light or drastically increased conductivity. For this reason, plasmonic nanoparticles are being applied to an endless number of applications for new materials. This thesis investigated the effects of silver nanocube (AgNC) arrays on the photophysical properties of poly(paraphenyleneethynylene) (PPE) fluorescent polymers, a particularly relevant material to the applications of organic-electronics. AgNCs were selected because of their particularly strong plasmonic field, which is enhanced at the sharp features of the cubes. The PPE polymer is an exceptionally fluorescent conjugated polymer that often serves as a building block for polymer-based sensing applications. By monitoring the absorption and emission of the PPE polymer, a better understanding of plasmonic effects on this polymer system was obtained. Compression of the monolayer of AgNCs on the surface of a Langmuir-Blodgett trough can be used for control of interparticle distance and, thus, the plasmon field intensity felt by an adsorbed layer of PPE polymer. In the Chapter 4, PPE (n = 15) emission was monitored as a function of the AgNC plasmonic field. A two-photon process was found to explain the unusual increase then decrease of the fluorescence intensity. This observation was attributed to exciton-exciton annihilation processes within the polymer. The annihilation process is initiated by large enhancements of the polymer absorption rate when plasmonic fields are at their highest (when the AgNCs are compressed to short interparticle distances). In chapter 5, the optical properties of PPE polymers as a function of their chain length and the AgNC density were examined. A simple study was conducted to consider the conformational/geometrical effects on PPE that were caused by the deposition of PPE onto the AgNC topography. In this study, the structure of the absorption and emission profiles were evaluated and used as evidence of polymer interchain interactions, planarization, and even the potential generation of oligomeric species through breaking of conjugation. Fundamental interactions between materials must be evaluated and optimized prior to their use in devices. This thesis serves to shed a little bit of light on the interaction of a well-defined plasmonic particle with a conjugated polymer. The Langmuir-Blodgett technique serves as a critical tool in applying these colloidally produced nanoparticles to 2D arrays in practical applications. The observation of exciton-exciton annihilation at low-energy excitation is an entirely new phenomenon that was initiated by the plasmonic properties of metal nanoparticles. It is the hope of the author that the results contained herein can aide in the use of plasmonic nanoparticles in future devices.

The interest in conjugated polymers has been two-fold. A rich variety of intriguing physical phenomena, combined with its immense technological implications in the area of molecular electronics, sensors etc. has inspired the researchers all over the globe. The work presented in this thesis is focussed on one of the most widely studied conjugated polymers, namely polyaniline (PANI), which is well known for its high conductivity and remarkable stability in the proton-doped form. The thesis is divided into two chapters and each chapter is further divided into several parts. In the first chapter, we take a look at some novel systems based on PANI that exhibit interesting electrical and optical properties. To begin with, we report the synthesis and characterization (Part I, Chapter 3) a new class of highly conducting polyaniline doped with electron deficient Lewis acids, namely the boron trihalides (BX3, X = F, Cl, and Br). We discuss the various attributes of this interesting class of materials that set it apart from the conventional proton-doped PANI systems. It is known that the conductivity in doped PANI is greatly influenced by the presence of structural disorder. Previous studies have associated the conductivity in doped PANI with the partial crystallinity that is achieved upon proton doping. At the same time, the amorphous regions that have a high degree of disorder were believed to suppress the metallic nature in these doped systems. In view of this "higher-crystallinity-higher-conductivity" picture, it is interesting to note that the BX3 doped PANI remain absolutely amorphous despite being more conducting than previously known samples. Through our investigation, we have been able to address some of the most important and long-standing questions pertaining to the nature of the charge carriers and the role of disorder in doped PANI. A detailed study of the transport properties in Part II, Chapter 3 helps us to understand the mechanism of charge transfer in these novel systems. With the help of our results, we establish that the present systems do not belong to the family of quasi one-dimensional conductors, in stark contrast to the conventional proton-doped samples. Instead, our systems are best described as granular metals, where the conduction mechanism is controlled by the size of the conducting grains and the nature of the grain boundaries. Through a comprehensive study of the magnetic properties based on d. c. magnetic susceptibility and EPR spectroscopy, we further establish that the intrinsic conductivity of these samples are much higher than the previously known systems. By studying the interaction of the mobile charge carriers and the localized spins in the systems, we have established that our samples are far less disordered, and therefore qualify as superior systems when compared to the more conventional proton-doped PANI. One of the serious disadvantages of the conventional protonated PANI lies in its thermal instability. On heating above 75 ±C in air, the polymer backbone undergoes an irreversible aerial oxidation that disrupts the extended conjugated structure. This is marked by a rapid drop in conductivity by a few orders of magnitude. BF3-doped PANI, which has the highest conductivity sample among the present series of samples, exhibits a remarkable thermal stability in air (Part III, Chapter 3). Upon heating, the conductivity initially increases and then reaches a saturation value. The polymer can be heated at temperatures as high as 225 ±C, without any signs of degradation. With the help of temperature dependent conductivity, XPS and FTIR spectroscopy we have tried to understand this unexpected phenomenon. In Part IV, Chapter 3, we report the synthesis and characterization of a novel class of functionalized PANI that exhibit an intense deep-blue photoluminescence. A de- tailed characterization based on absorption, photoluminescence, XPS, NMR and FTIR spectroscopy has been carried out to study the chemical state of this new class of light- emitting polymers. Further, we note that the synthetic procedure followed in this work can provide a very general route to the synthesis of diversely useful derivatives of PANI. In Chapter 4, we have investigated the microscopic origin of conductivity in doped PANI. Among the several factors that can influence the conductivity of doped polymers, one is the microstructural order. To understand this better, we carried out a detailed investigation, based on scanning tunneling microscopy (STM) and spectroscopy (STS) of undoped and doped PANI films (Part I, Chapter 4). We have shown for the ¯rst time that solution processed thin films of undoped PANI has an abundance of PANI anorods self organized over very large areas. Further, we observe that this ordered orphology is Preface vii very sensitive to the choice of dopants and the doping procedure. We have shown that the morphological order can greatly influence the electronic structure and therefore the properties of these systems. To understand the role of dopant-polymer interaction in controlling the conductivity of doped PANI, we carried out x-ray photoelectron spectroscopy (XPS) studies on a large number of partially and fully doped samples (Part II, Chapter 4). We find an interesting trend in the higher binding energy feature and the asymmetry of the N and C 1s spectra, which correlates directly with the respective conductivities of different samples. The analysis of these spectra brings out interesting facts about the chemical state and the electronic structure of these samples. In summary, we have reported new PANI based systems with improved electrical and interesting optical properties, and have studied various factors that influence the properties of these as well as some of conventional doped PANI systems.

<p>The aim of this diploma work is to improve selectivity and sensitivity in DNA-chips by utilizing fluorescence resonance energy transfer (FRET) between conjugated polyelectrolytes (CPEs) and fluorophores.</p><p>Leclerc and co-workers have presented successful results from studies of super FRET between fluorophore tagged DNA and a CPE during hybridisation of the double strand. Orwar and co-workers have constructed a DNA-chip using standard photo lithography creating a pattern of the hydrophobic photoresist SU-8 and cholesterol tagged DNA (chol-DNA). This diploma work will combine and modify these two ideas to fabricate a improved DNA-chip.</p><p>Immobilizing of DNA onto surface has been done by using soft lithography. Hydrophobic pattern arises from the poly(dimethylsiloxane) (PDMS) stamp. The hydrophobic pattern will attract chol-DNA that is adsorbed to the chip. Different sets of fluorophores are covalently bound to the DNA and adding CPEs to the complex will make FRET occur between CPE and bound fluorophore.</p><p>We will here show that the specificity in DNA hybridization by using PDMS patterning was high. FRET clearly occurred, especially with the CPEs as donor to the fluorophore Cy5. The intensity of FRET was higher when the fluorophore and the CPE were conjugated to the same DNA strand. The largest difference in FRET intensity between double stranded and single stranded complexes was observed with the CPE tPOMT. Super FRET has been observed but not yet fully proved. The FRET efficiency was lower with the fluorophore Alexa350 as donor compared to the Cy5/CPE complex. Most of the energy transferred from Alexa350 was extinguished by quenching.</p>

<p>Polymer electrochromism on PEDOT coated fibres was successfully achieved. The electrochromic property of the PEDOT polymer is an excellent property. This feature gives way to many more research works at present and in the future also. The electrochromic property of the PEDOT polymer is utilized in this thesis work to design an electrochromic display pixel.</p><p> </p><p>The polymer coating over the fibres were obtained by using In-situ polymerization technique. The coated-fibres were used to design a display-pixel. Electrochemistry is performed successfully on the designed pixel to study electrochromism over the pixels. An electrochemical fibre transistor is designed successfully using the polymer coated fibres.</p> / Polymer Electrochromism on PEDOT coated fibres

<p>Despite tremendous achievements, the field of conjugated polymers is still in its infancy, mimicking the more mature inorganic, i.e. silicon-based, technologies. We may though look forward to the realisation of electronic and electrochemical devices with exotic designs and device applications, as our knowledge about the fundamentals of these promising materials grow ever stronger. </p><p>My own contribution to this development, originating from an idea first put forward by my tutor, Professor Magnus Berggren, is a design for a switchable polymer-based diode. Its architecture is based on a modified version of a recently developed highly-rectifying diode,12 where an intermediate molecular layer has been incorporated in the bottom contact. Due to its unique ability to switch its internal resistance during operation, this thin layer can be used to shift the amount of (forward) current induced into the rectifying structure of the device, and by doing so shift its electrical characteristics between an insulating and a rectifying behaviour (as illustrated below). Such a component should be of great commercial interest in display technologies since it would, at least hypothetically, be able to replace the transistors presently used to address the individual matrix elements. </p><p>However, although fairly simple in theory, it proved to be quite the challenge to fabricate the device structure. Machinery errors and contact problems aside, several process routes needed to be evaluated and only a small fraction of the batches were successful. In fact, it was not until the very last day that I detected the first indications that the concept might actually work. Hence, several modifications might still be necessary to undertake in order to get the device to work properly.</p>

Tez (Yüksek Lisans) - Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, Fizik Anabilim Dalı, 2008. / Kaynakça var.

The design, synthesis and characterization of novel conjugated polymers are described. Using a coupling reaction recently developed within our labs, polymers were constructed through triazene linkages generated by joining N-heterocyclic carbenes (NHCs) with organic azides. This triazene reaction produced polymer of sufficiently high molecular weight as to be spin-coated and rendered conductive upon doping with iodine. The reaction also has potential for executing post-polymerization modifications. This was evidenced through rapid functionalization of poly(4-methylazido-styrene) via triazene formation using a commercially available N-heterocyclic carbene (NHC). A formal anion metathesis of benzobis(imidazolium)s was used to transform neutral block copolymers into block ionomers. Further investigation of the block ionomers revealed their solvent mediated self assembly. The gradual change of organic to aqueous media caused the adoption of a three-dimensional micelle conformation as determined by transmission electron microscopy and dynamic light scattering. Through the exploitation of carbene-carbon disulfide adducts, new chain transfer agents were generated. After 2-dithiocarboxylate-imidazolium adduct formation, alkylation was performed with benzyl bromide. The resulting charged chain transfer agent was tested for its ability to moderate radical addition fragmentation (RAFT) polymerizations of styrene. A considerable increase in transfer kinetics as compared to that of commonly used RAFT agents was observed whilst retaining low polydispersity and molecular weight control. The rate enhancement is presumably due to the electron withdrawing imidazolium activating the thionyl towards the nucleophilic radical while retaining effective fragmentation. Ion coordinating macrocycles were affixed to a poly(methacrylate) scaffold for employment as electrolyte extractants. Polymer bound calix[4]pyrrole was found to complex fluoride and chloride with sufficient strength as to extract tetrabutylammonium salts from water. Enhanced extraction abilities were observed when calix[4]pyrrole was used in conjunction with benzo-15-crown-5. Methacrylate polymers containing both macrocycles affected the removal of aqueous potassium fluoride from a biphasic water/dichloromethane mixture. To provide evidence for the presence of potassium fluoride within the dichloromethane layer, ¹⁹F NMR and flame emission spectroscopy were used. / text

Conjugated polymers hold tremendous potential as low-cost, solution processable materials for electronic applications such organic light-emitting diodes and photovoltaics. While the concerted efforts of many research groups have improved the performance of organic electronic devices to near-relevant levels for commercial exploitation over the last decade, the overall performance of organic light-emitting diode and organic photovoltaic devices still lags behind that of their traditional, inorganic counterparts. Realizing the full potential of organic electronics will require a comprehensive, molecular-level understanding of conjugated polymer photophysics. Studying pure, well-defined, and reproducible conjugated polymer materials should enable these efforts; unfortunately, conjugated polymers are typically synthesized by metal-catalyzed step-growth polycondensation reactions that do not allow for rigorous control over polymer molecular weight or molecular weight distribution (i.e., dispersity). Chain-growth syntheses of conjugated polymers would not only allow for precise control over the aforementioned polymer metrics such as molecular weight and dispersity, but could also potentially create new applications by enabling the preparation of more advanced macromolecular structures such as block copolymers and surface grafted polymers. Our efforts toward realizing these goals as well as toward exploiting chain-growth methodologies to better understand fundamental conjugated polymer photophysics and self-assembly will be presented. / text

Conjugated polymers are currently being used for a wide range of electronic applications. In this thesis, we studied two different synthetic approaches that lead to novel monomers and polymers that can be potentially used in electrochromic, or photovoltaic devices. The first approach described in this thesis is the utilization of olefin cross metathesis to create a family of dithienogermole (DTG) monomer derivatives in which synthetic control of the solubilizing side chains is achieved through an alkenyl building block. This alkenyl intermediate allows one to functionalize the DTG moiety though olefin cross metathesis to obtain a wide range of alkyl chain lengths and pendant functionalities on the polymer backbone. This work lead to the first example in the literature in which the synthesis of DTG moieties was not limited by the chain length of the solubilizing alkyl units. It provides a route that avoids the use of distillation for the purification the DTG monomer, allowing for the synthesis of a wide range of DTG derivatives that were previously unobtainable though the conventional synthetic methods. Finally, in this thesis we also describe the work of the use of direct (hetero)arylation polymerizations (DHAP) as a means of obtaining 3,4-propylenedioxythiophene-based conjugated polymers for use in electrochromic applications. This synthetic method offers a rapid route to achieving polymers in high yields with simplified purification procedures and low residual metal content, as determined by inductive coupled plasma-mass spectrometry (ICP-MS). The studied polymers possess comparable electrochromic properties to those previously reported by the Reynolds group, implying that their switching ability from a colored to a transmissive state is independent of the residual metallic impurities.