The Garson Ni-Cu-PGE deposit is located on the South Range of the 1850 Ma Sudbury structure along the contact between the Sudbury Igneous Complex (SIC) and the underlying metasedimentary and metavolcanic rocks of the Paleoproterozoic Huronian Supergroup. It comprises four ore bodies that are hosted by E-W-trending shear zones that dip steeply to the south. The shear zones formed as south-directed D1 thrusts in response to flexural-slip during regional buckling of the SIC. They imbricated the ore zones, the SIC norite, the underlying Huronian rocks and they emplaced slivers of Huronian rocks and anatectic breccia into the overlying Main Mass norite. Coexisting garnet-amphibole pairs yielded syn-D1 amphibolite facies metamorphic temperatures ranging from ~550°C to 590°C. The shear zones were coeval with the moderately southdipping South Range and Thayer Lindsley shear zones, which formed to accommodate the strain in the hinge zone as the SIC tightened with progressive D1 shortening. The SE limb of the SIC was overturned together with the D1 thrusts, which were then reactivated as steeply south-dipping reverse shear zones during syn-D2 greenschist metamorphism. Syn-D2 metamorphic titanite yield a U-Pb age of ca. 1849 ± 6 Ma, suggesting that D1 and D2 are part of a single progressive deformation event that occurred immediately after crystallization of the SIC during the Penokean Orogeny. The ore bodies plunge steeply to the south parallel to the colinear L1 and L2 stretching mineral lineations. Ore types consist mainly of pyrrhotite-pentlandite-chalcopyrite breccia ores, but also include pyrrhotite-pentlandite-chalcopyrite disseminated sulfide mineralization in norite, and syn-D2 quartz-calcite-chalcopyrite-pyrrhotite-pentlandite iv veins. In the breccia ores, matrix sulfides surround silicate rock fragments that have a strong shape-preferred orientation defining a pervasive foliation. The fragments are highly stretched parallel to the mineral lineations in wall rocks, suggesting that the ore bodies are zones of high strain. Pyrrhotite and chalcopyrite occur in piercement structures, in boudin necks between fragments, in fractures in wall rocks and in fold hinges, suggesting that the sulfides were mobilized by ductile plastic flow. Despite evidence of high strain in the ore zones, the sulfide matrix in D1 and D2 breccia ores show little evidence of strain as they consist predominantly of polygonal pyrrhotite aggregates, suggesting that they recrystallized during, or immediately after D1 and D2. However, rare elongate pyrrhotite grains aligned parallel to S2 are locally preserved only in D2 breccia ores. Exsolution of pentlandite loops along grain boundaries of elongate pyrrhotite formed S2-parallel pentlandite-rich layers in D2 breccia ores, whereas the pentlandite loops are multi-oriented in D1 contact breccia as they were exsolved along grain boundaries polygonal pyrrhotite. Because exsolution of pentlandite post-date D1 and D2, and that individual pentlandite grains neither have a shape-preferred orientation nor show evidence for cataclastic flow, the sulfides reverted to, and were mobilized as a homogeneous metamorphic monosulfide solid solution (mss) during D1 and possibly D2. This is in agreement with predictions from phase equilibria as the average Garson composition plots within the mss field in Fe-Ni-S ternary diagram at temperatures above ~400°C. Disseminated and breccia ores at Garson have similar mantle-normalized multi-element chalcophile patterns as undeformed contact-type disseminated and massive ore, v respectively, at the well known Creighton mine in the South Range. This suggests that the Garson ores are magmatic in origin and that their compositions were not significantly altered by hydrothermal fluids and deformation. The lack of variations in Ni tenors between the disseminated and breccias ores suggest that the R-factor was not the process controlling metal tenors because the disseminated sulfides do not consistently have higher metal tenors than the breccia ore. The breccia ores are enriched in Rh-Ru-Ir and are depleted in Cu-Pd-Pt-Au, in contrast to footwall-type ore at the nearby Garson Ramp mine which is enriched in the same metals. When Ni100, Rh100, Ir100, Pt100 and Pd100 are plotted against Cu100, the breccia and footwall-type ore analyses plot along model mss fractionation and sulfide melt model curves, suggesting that these two ore types are related by mss fractionation. In summary, the Garson breccia ores are mss cumulates that settled quickly at the base of the SIC via a gravity filtration process, and were mobilized as a metamorphic mss by ductile plastic flow during D1 and D2. Despite minor local hydrothermal mobilization of some metals, the study confirms findings from other studies that highly deformed Ni-Cu- PGE deposits, such as the Garson deposit, can provide important information on the genesis of the deposits.

The Garson Ni-Cu-PGE deposit is located on the South Range of the 1850 Ma Sudbury structure along the contact between the Sudbury Igneous Complex (SIC) and the underlying metasedimentary and metavolcanic rocks of the Paleoproterozoic Huronian Supergroup. It comprises four ore bodies that are hosted by E-W-trending shear zones that dip steeply to the south. The shear zones formed as south-directed D1 thrusts in response to flexural-slip during regional buckling of the SIC. They imbricated the ore zones, the SIC norite, the underlying Huronian rocks and they emplaced slivers of Huronian rocks and anatectic breccia into the overlying Main Mass norite. Coexisting garnet-amphibole pairs yielded syn-D1 amphibolite facies metamorphic temperatures ranging from ~550°C to 590°C. The shear zones were coeval with the moderately southdipping South Range and Thayer Lindsley shear zones, which formed to accommodate the strain in the hinge zone as the SIC tightened with progressive D1 shortening. The SE limb of the SIC was overturned together with the D1 thrusts, which were then reactivated as steeply south-dipping reverse shear zones during syn-D2 greenschist metamorphism. Syn-D2 metamorphic titanite yield a U-Pb age of ca. 1849 ± 6 Ma, suggesting that D1 and D2 are part of a single progressive deformation event that occurred immediately after crystallization of the SIC during the Penokean Orogeny. The ore bodies plunge steeply to the south parallel to the colinear L1 and L2 stretching mineral lineations. Ore types consist mainly of pyrrhotite-pentlandite-chalcopyrite breccia ores, but also include pyrrhotite-pentlandite-chalcopyrite disseminated sulfide mineralization in norite, and syn-D2 quartz-calcite-chalcopyrite-pyrrhotite-pentlandite iv veins. In the breccia ores, matrix sulfides surround silicate rock fragments that have a strong shape-preferred orientation defining a pervasive foliation. The fragments are highly stretched parallel to the mineral lineations in wall rocks, suggesting that the ore bodies are zones of high strain. Pyrrhotite and chalcopyrite occur in piercement structures, in boudin necks between fragments, in fractures in wall rocks and in fold hinges, suggesting that the sulfides were mobilized by ductile plastic flow. Despite evidence of high strain in the ore zones, the sulfide matrix in D1 and D2 breccia ores show little evidence of strain as they consist predominantly of polygonal pyrrhotite aggregates, suggesting that they recrystallized during, or immediately after D1 and D2. However, rare elongate pyrrhotite grains aligned parallel to S2 are locally preserved only in D2 breccia ores. Exsolution of pentlandite loops along grain boundaries of elongate pyrrhotite formed S2-parallel pentlandite-rich layers in D2 breccia ores, whereas the pentlandite loops are multi-oriented in D1 contact breccia as they were exsolved along grain boundaries polygonal pyrrhotite. Because exsolution of pentlandite post-date D1 and D2, and that individual pentlandite grains neither have a shape-preferred orientation nor show evidence for cataclastic flow, the sulfides reverted to, and were mobilized as a homogeneous metamorphic monosulfide solid solution (mss) during D1 and possibly D2. This is in agreement with predictions from phase equilibria as the average Garson composition plots within the mss field in Fe-Ni-S ternary diagram at temperatures above ~400°C. Disseminated and breccia ores at Garson have similar mantle-normalized multi-element chalcophile patterns as undeformed contact-type disseminated and massive ore, v respectively, at the well known Creighton mine in the South Range. This suggests that the Garson ores are magmatic in origin and that their compositions were not significantly altered by hydrothermal fluids and deformation. The lack of variations in Ni tenors between the disseminated and breccias ores suggest that the R-factor was not the process controlling metal tenors because the disseminated sulfides do not consistently have higher metal tenors than the breccia ore. The breccia ores are enriched in Rh-Ru-Ir and are depleted in Cu-Pd-Pt-Au, in contrast to footwall-type ore at the nearby Garson Ramp mine which is enriched in the same metals. When Ni100, Rh100, Ir100, Pt100 and Pd100 are plotted against Cu100, the breccia and footwall-type ore analyses plot along model mss fractionation and sulfide melt model curves, suggesting that these two ore types are related by mss fractionation. In summary, the Garson breccia ores are mss cumulates that settled quickly at the base of the SIC via a gravity filtration process, and were mobilized as a metamorphic mss by ductile plastic flow during D1 and D2. Despite minor local hydrothermal mobilization of some metals, the study confirms findings from other studies that highly deformed Ni-Cu- PGE deposits, such as the Garson deposit, can provide important information on the genesis of the deposits.

Large Igneous Provinces (LIPs) form during short-lived pulses of extensive magmatic activity. LIPs are known for their ability to affect global climate as well as for their Ni-Cu-PGE ore potential. A key factor that controls the intensity of the climate impact of a LIP and its ore potential is the assimilation of volatile-rich sedimentary host rocks. Magmas of the High Arctic Large Igneous Province (HALIP), exposed in the Arctic, intruded volatile-rich black shales, carbonates and evaporites in the Canadian Arctic Islands, offering a great opportunity for studying magma-sediment interaction. The purpose of this study is to test whether assimilation of sedimentary sulphide can promote sulphide immiscibility in magma and thus aid formation of Ni-Cu-PGE ore bodies. This is done by analysing sulphur isotopes in pyrite grains hosted in a HALIP dolerite sill, which was emplaced into black shale, by using Secondary Ion Mass Spectrometry (SIMS). Four dolerite samples are analysed; two coming from the lower contact margin of the sill, one from 60 cm into the sill and one sample from a basaltic vein at the upper contact margin of the sill. A total of 14 pyrite grains (n = 246 individual SIMS spot analyses) were analysed for their sulphur isotope ratios. The results of the SIMS analyses show that all analysed sulphides have highly negative δ34S values ranging from -19.5 to -5.7‰ (average δ34S = -8.2 ± 0.83‰, 2SD), which therefore differ largely from that of the primitive mantle (0 ± 1.8‰). In order to put our four analysed dolerite samples into a broader context, δ34S data of our sulphides are compared with whole-rock δ34S and δ18O data from Hare Fiord shale and dolerite samples. The δ34S values of the sulphide samples from the sill typically trend toward the negative sulphur isotope composition of the sulphides in the surrounding shale, and the shale surrounding the sill experiences a loss of 32S near the contact of the sill. This indicates that sedimentary light sulphur (32S) has been locally incorporated into the sill by the surrounding shale, resulting in negative δ34S values in the magmatic sulphides. Since sulphide immiscibility in the Hare Fiord sill was triggered by assimilation of sulphur from host rock shale, the igneous rocks of the HALIP may be prospective for Ni-Cu-PGE mineralization, though more studies are needed. Furthermore, our results suggest that incorporation of crustal sulphur increased the volatile budget of HALIP magmas, which therefore could have contributed to a deterioration of the environmental conditions during the emplacement of the HALIP. / Stora magmatiska provinser (på engelska Large Igneous Provinces, LIPs) är vulkaniska event då enorma mängder magma avsätts över en väldigt stor yta under ett, i ett geologiskt perspektiv, kort tidsspann. Dessa stora vulkaniska utbrott har väckt stort intresse då de är samtida med flera av de största massutdöendena i jordens historia, men också för att en viss typ av sulfidmalm rik på nickel, koppar och platinametaller (Ni-Cu-PGE malmer) ofta förekommer i provinsernas magmagångar och magmakammare. En viktig faktor som till stor del avgör en magmatisk provins påverkan på klimatet och potentiella malmförekomster är inkorporering av sedimentära bergarter till magman som, när de hettas upp, kan frigöra gaser rika på svavel och kol. I Kanadas arktiska öar trängde magma tillhörande den högarktiska magmatiska provinsen (HALIP) in i svart skiffer, karbonater och evaporiter, som är sedimentära bergarter rika på flyktiga ämnen. Denna magmatiska provins erbjuder därför stora möjligheter till att studera interaktionen mellan magma och sedimentära bergarter. Syftet med denna studie är att testa om inkorporering av sedimentärt svavel kan främja bildandet av sulfidsmälta i magma och därigenom bidra till bildandet av sulfidmalmer. Detta görs genom att analysera svavelisotoper i sulfidmineral i prover från en magmagång, som trängde in i en skifferformation, tillhörande den högarktiska magmatiska provinsen i norra Kanada. Genom att analysera svavelisotopkvoten (δ34S) i sulfidmineral kan man få information om huruvida svavlet i mineralen är av sedimentärt ursprung (där skiffer generellt har negativa δ34S värden) eller om svavlet har δ34S värden liknande de från manteln (som har δ34S värden runt 0‰), vilket i så fall skulle innebära att magman inte har inkorporerat sedimentärt svavel. Genom att använda masspektrometri av typen SIMS analyseras totalt 14 sulfidmineralkorn (n = 246 individuella SIMS punkter) för deras svavelisotopkvoter. Resultatet av studien visar att alla analyserade sulfidmineral har mycket negativa δ34S värden mellan -19.5 och -5.7‰ (med ett δ34S medelvärde på -8.2 ± 0.83‰, två standardavvikelser). Genom att jämföra våra δ34S värden med δ34S och δ18O värden för andra prover från både magmagången och den omgivande skiffern kunde vi se att δ34S värdena för sulfidmineralen i de yttre delarna av magmagången har liknande negativa värden som den omgivande skiffern, och att δ34S värdena för skiffern närmast magmagången är mer positiva. Detta tyder på att sedimentärt svavel i kontakten mellan magmagången och skiffern har blivit inkorporerat i magman från den omgivande skiffern. Våra resultat tyder därför på att sulfidmineralen i våra prover från magmagången bildades genom assimilering av svavel från den omgivande skiffern. Detta innebär i sin tur att den kanadensiska högarktiska magma provinsen potentiellt kan vara en källa för sulfidmalm, även om ytterligare studier behövs. Dessutom visar våra resultat att inkorporering av sedimentärt svavel förmodligen ökade de vulkaniska gaserna i magman, vilket kan ha bidragit till klimatförändringar relaterade till den vulkaniska aktiviteten av den högarktiska magmatiska provinsen.

The Bird River sill (BRS) is composed of layered mafic-ultramafic intrusive bodies which intruded the Bird River greenstone belt in southeastern Manitoba. Layered intrusions, such as those that collectively make-up the BRS, are important hosts to base and precious metal deposits. This study was initiated to examine and develop an emplacement model for the western half of the BRS and to establish the controls on Cr-Ni-Cu-PGE mineralization. The BRS intrusions were emplaced through multiple-magmatic injections into different stratigraphic levels in the Lamprey Falls Formation. It is interpreted that the central BRS intrusions are connected and represent a single conduit system. The BRS and the Lamprey Falls Formation are overlain by the metasedimentary rocks of the Peterson Creek Formation and are overturned. The stratigraphy of the BRS is divided into four series which are from the base upwards: 1) marginal mafic series, 2) ultramafic series, 3) transition series, and 4) mafic series. All significant concentrations of Cr-Ni-Cu-PGE are contained in the ultramafic series. Mineralization is magmatic in origin with significant Ni-Cu and PGE remobilization associated with late felsic magmatism. Ni-Cu remobilization is also associated with mineralized shear zones that cross-cut the BRS and Lamprey Falls Formation. The sulphur source could not be determined unambiguously based on sulphur isotopes alone but the δ34S values of the BRS intrusions suggests that the sulphur in the BRS is magmatic in origin and that two of the BRS bodies may have assimilated external sulphur. The findings of this investigation have considerable economic implications. The model that each BRS body is an individual intrusion implies each body may contain its own style of mineralization. Secondly, the Page body of the BRS is interpreted to represent a turbulent magmatic environment and to be the first intrusion to form at the lowest stratigraphic level. The magmas that formed the stratigraphically higher BRS intrusions are believed to have passed through the Page intrusion. Therefore, the Page body is an excellent exploration target as it represents a turbulent environment in which significant amounts of primitive magma have passed through which are two key factors in the formation of Ni-Cu-PGE deposits.

The Bird River sill (BRS) is composed of layered mafic-ultramafic intrusive bodies which intruded the Bird River greenstone belt in southeastern Manitoba. Layered intrusions, such as those that collectively make-up the BRS, are important hosts to base and precious metal deposits. This study was initiated to examine and develop an emplacement model for the western half of the BRS and to establish the controls on Cr-Ni-Cu-PGE mineralization. The BRS intrusions were emplaced through multiple-magmatic injections into different stratigraphic levels in the Lamprey Falls Formation. It is interpreted that the central BRS intrusions are connected and represent a single conduit system. The BRS and the Lamprey Falls Formation are overlain by the metasedimentary rocks of the Peterson Creek Formation and are overturned. The stratigraphy of the BRS is divided into four series which are from the base upwards: 1) marginal mafic series, 2) ultramafic series, 3) transition series, and 4) mafic series. All significant concentrations of Cr-Ni-Cu-PGE are contained in the ultramafic series. Mineralization is magmatic in origin with significant Ni-Cu and PGE remobilization associated with late felsic magmatism. Ni-Cu remobilization is also associated with mineralized shear zones that cross-cut the BRS and Lamprey Falls Formation. The sulphur source could not be determined unambiguously based on sulphur isotopes alone but the δ34S values of the BRS intrusions suggests that the sulphur in the BRS is magmatic in origin and that two of the BRS bodies may have assimilated external sulphur. The findings of this investigation have considerable economic implications. The model that each BRS body is an individual intrusion implies each body may contain its own style of mineralization. Secondly, the Page body of the BRS is interpreted to represent a turbulent magmatic environment and to be the first intrusion to form at the lowest stratigraphic level. The magmas that formed the stratigraphically higher BRS intrusions are believed to have passed through the Page intrusion. Therefore, the Page body is an excellent exploration target as it represents a turbulent environment in which significant amounts of primitive magma have passed through which are two key factors in the formation of Ni-Cu-PGE deposits.

The Marathon PGM-Cu deposit is hosted by the Coldwell alkaline complex, which consists predominantly of gabbro and syenite and was emplaced at 1108 Ma as part of the Mid-Continent Rift System. Mineralization at the Marathon PGM-Cu deposit is hosted by the Two Duck Lake Gabbro (TDLG), a fresh olivine-bearing gabbro. The Marathon deposit contains several zones of mineralization including the Basal Zone, the Main Zone and the W-Horizon. The W-Horizon is a high-grade PGE zone characterized by low S, low Cu/Pd and high Cu/Ni. The sulphide mineral assemblage is predominantly chalcopyrite and bornite. This contrasts with the Main Zone where the dominant sulphide mineral assemblage is chalcopyrite and pyrrhotite. The Main Zone contains higher S, higher Cu/Pd and shows a decrease in Cu/Pd and pyrrhotite/chalcopyrite from base to top. Four drill holes were selected for detailed analysis to characterize the W-Horizon style of mineralization. Detailed petrographic study of the pristine and largely unaltered TDLG shows that wide spread hydrothermal alteration is not responsible for the mineralization. Detailed outcrop mapping shows that the TDLG intruded as a series of multiple intrusions in a dynamic magmatic system. Geochemical studies through the W-Horizon show that the mineralization is not the result of crystallization in a layered intrusion. The results of geochemical assays and electron microprobe analysis of olivine grains show that the chemistry through the TDLG hosting the W-Horizon is erratic. This data supports the TDLG intruding as a series of sills in a dynamic conduit environment. The calculated sulphide metal tenors for the W-Horizon are higher than can be explained by closed system R Factor models. Multistage dissolution upgrading in an open system is examined as the process forming the W-Horizon. This model is able to produce the sulphide metal tenors observed in the W-Horizon. Sulphur loss also affects grades and tenors and was examined through geochemical and petrological data. The change in sulphide mineral assemblage from a pyrrhotite and chalcopyrite (S-rich) to chalcopyrite and bornite (S-poor) supports S-loss. Whole rock S and Se contents are also analyzed to investigate S loss, a lower S/Se indicates that sulphur has been removed from the system. Average S/Se values are ~800 for the W-Horizon, ~1980 for the Main Zone and ~1700 in unmineralized samples. The very low S/Se observed within the W-Horizon supports S-loss. Sulphur loss in a dynamic magmatic conduit system is proposed for the formation of the W-Horizon mineralization. In this model sulphur undersaturated basaltic magma interacted with an immiscible sulphide liquid in a magma conduit, resulting in the dissolution of sulphide into the basaltic melt and PGE enrichment.

The Marathon PGM-Cu deposit is hosted by the Coldwell alkaline complex, which consists predominantly of gabbro and syenite and was emplaced at 1108 Ma as part of the Mid-Continent Rift System. Mineralization at the Marathon PGM-Cu deposit is hosted by the Two Duck Lake Gabbro (TDLG), a fresh olivine-bearing gabbro. The Marathon deposit contains several zones of mineralization including the Basal Zone, the Main Zone and the W-Horizon. The W-Horizon is a high-grade PGE zone characterized by low S, low Cu/Pd and high Cu/Ni. The sulphide mineral assemblage is predominantly chalcopyrite and bornite. This contrasts with the Main Zone where the dominant sulphide mineral assemblage is chalcopyrite and pyrrhotite. The Main Zone contains higher S, higher Cu/Pd and shows a decrease in Cu/Pd and pyrrhotite/chalcopyrite from base to top. Four drill holes were selected for detailed analysis to characterize the W-Horizon style of mineralization. Detailed petrographic study of the pristine and largely unaltered TDLG shows that wide spread hydrothermal alteration is not responsible for the mineralization. Detailed outcrop mapping shows that the TDLG intruded as a series of multiple intrusions in a dynamic magmatic system. Geochemical studies through the W-Horizon show that the mineralization is not the result of crystallization in a layered intrusion. The results of geochemical assays and electron microprobe analysis of olivine grains show that the chemistry through the TDLG hosting the W-Horizon is erratic. This data supports the TDLG intruding as a series of sills in a dynamic conduit environment. The calculated sulphide metal tenors for the W-Horizon are higher than can be explained by closed system R Factor models. Multistage dissolution upgrading in an open system is examined as the process forming the W-Horizon. This model is able to produce the sulphide metal tenors observed in the W-Horizon. Sulphur loss also affects grades and tenors and was examined through geochemical and petrological data. The change in sulphide mineral assemblage from a pyrrhotite and chalcopyrite (S-rich) to chalcopyrite and bornite (S-poor) supports S-loss. Whole rock S and Se contents are also analyzed to investigate S loss, a lower S/Se indicates that sulphur has been removed from the system. Average S/Se values are ~800 for the W-Horizon, ~1980 for the Main Zone and ~1700 in unmineralized samples. The very low S/Se observed within the W-Horizon supports S-loss. Sulphur loss in a dynamic magmatic conduit system is proposed for the formation of the W-Horizon mineralization. In this model sulphur undersaturated basaltic magma interacted with an immiscible sulphide liquid in a magma conduit, resulting in the dissolution of sulphide into the basaltic melt and PGE enrichment.

The Nebo-Babel Ni-Cu-platinum-group element (PGE) magmatic sulphide deposit, a world-class ore body, is hosted in low-MgO, tube-like (chonolithic) gabbronorite intrusion in the West Musgrave Block, Western Australia. The Nebo-Babel deposit is the first significant discovery of a nickel sulphide deposit associated with the ca. 1078 Ma Giles Complex, which is part of the Warakurna large igneous province (LIP), now making the Musgrave Block a prime target for nickel sulphide exploration. The Musgrave Block is a Mesoproterozoic, east-west trending, orogenic belt in central Australia consisting of amphibolite and granulite facies basement gneisses with predominantly igneous protoliths. The basement lithologies have been intruded by mafic-ultramafic and felsic rocks; multiply deformed and metamorphosed between 1600 Ma and 500 Ma. The Giles Complex, which is part of the Warakurna LIP, was emplaced at ca. 1078 Ma and consists of a suite of layered mafic-ultramafic intrusions, mafic and felsic dykes and temporally associated volcanic rocks and granites. The Giles Complex intrusions are interpreted to have crystallised at crustal depths between 15km and 30km and are generally undeformed and unmetamorphosed.